[2] | 1 | #!/usr/bin/perl -w |
---|
[32] | 2 | # |
---|
[259] | 3 | # Copyright (C) 2005-2017 Gabriel Moreau <Gabriel.Moreau(A)univ-grenoble-alpes.fr> |
---|
[32] | 4 | # |
---|
| 5 | # $Id: klask 330 2017-10-31 15:05:26Z g7moreau $ |
---|
[2] | 6 | |
---|
| 7 | use strict; |
---|
[3] | 8 | use warnings; |
---|
[313] | 9 | use version; our $VERSION = qv('0.7.5'); |
---|
[2] | 10 | |
---|
[63] | 11 | use Readonly; |
---|
[64] | 12 | use FileHandle; |
---|
[2] | 13 | use Net::SNMP; |
---|
[44] | 14 | #use YAML; |
---|
| 15 | use YAML::Syck; |
---|
[2] | 16 | use Net::Netmask; |
---|
| 17 | use Net::CIDR::Lite; |
---|
| 18 | use NetAddr::IP; |
---|
[110] | 19 | use Getopt::Long qw(GetOptions); |
---|
[68] | 20 | use Socket; |
---|
[109] | 21 | use List::Util 'shuffle'; |
---|
[295] | 22 | use Digest::SHA qw(sha512_base64); |
---|
[311] | 23 | use Text::Table; # libtext-table-perl http://blogs.perl.org/users/steven_haryanto/2014/07/benchmarking-several-ascii-table-generator-modules.html |
---|
[2] | 24 | |
---|
[8] | 25 | # apt-get install snmp fping libnet-cidr-lite-perl libnet-netmask-perl libnet-snmp-perl libnetaddr-ip-perl libyaml-perl |
---|
[311] | 26 | # libcrypt-des-perl libcrypt-hcesha-perl libdigest-hmac-perl libtext-table-perl |
---|
[79] | 27 | # arping net-tools fping bind9-host arpwatch |
---|
[2] | 28 | |
---|
[218] | 29 | ################################################################ |
---|
| 30 | # general initialization |
---|
| 31 | ################################################################ |
---|
| 32 | |
---|
[100] | 33 | my $KLASK_VAR = '/var/lib/klask'; |
---|
[92] | 34 | my $KLASK_CFG_FILE = '/etc/klask/klask.conf'; |
---|
[28] | 35 | my $KLASK_DB_FILE = "$KLASK_VAR/klaskdb"; |
---|
| 36 | my $KLASK_SW_FILE = "$KLASK_VAR/switchdb"; |
---|
[2] | 37 | |
---|
[26] | 38 | test_running_environnement(); |
---|
| 39 | |
---|
[44] | 40 | my $KLASK_CFG = YAML::Syck::LoadFile("$KLASK_CFG_FILE"); |
---|
[2] | 41 | |
---|
[221] | 42 | my %DEFAULT = %{$KLASK_CFG->{'default'}}; |
---|
| 43 | my @SWITCH_LIST = @{$KLASK_CFG->{'switch'}}; |
---|
[2] | 44 | |
---|
[196] | 45 | my %SWITCH_LEVEL = (); |
---|
[63] | 46 | my %SWITCH_DB = (); |
---|
[2] | 47 | LEVEL_OF_EACH_SWITCH: |
---|
[209] | 48 | for my $sw (@SWITCH_LIST) { |
---|
[261] | 49 | $SWITCH_LEVEL{$sw->{'hostname'}} = $sw->{'level'} || $DEFAULT{'switch_level'} || 2; |
---|
| 50 | $SWITCH_DB{$sw->{'hostname'}} = $sw; |
---|
[208] | 51 | |
---|
| 52 | # SNMP parameter initialisation |
---|
[261] | 53 | my %session = ( -hostname => $sw->{'hostname'} ); |
---|
[221] | 54 | $session{-version} = $sw->{'version'} || 1; |
---|
| 55 | $session{-port} = $sw->{'snmpport'} || $DEFAULT{'snmpport'} || 161; |
---|
| 56 | if (exists $sw->{'version'} and $sw->{'version'} eq '3') { |
---|
| 57 | $session{-username} = $sw->{'username'} || 'snmpadmin'; |
---|
[208] | 58 | } |
---|
| 59 | else { |
---|
[221] | 60 | $session{-community} = $sw->{'community'} || $DEFAULT{'community'} || 'public'; |
---|
[208] | 61 | } |
---|
[221] | 62 | $sw->{'snmp_param_session'} = \%session; |
---|
[2] | 63 | } |
---|
[261] | 64 | @SWITCH_LIST = reverse sort { $SWITCH_LEVEL{$a->{'hostname'}} <=> $SWITCH_LEVEL{$b->{'hostname'}} } @{$KLASK_CFG->{'switch'}}; |
---|
[2] | 65 | |
---|
[196] | 66 | #my %SWITCH_PORT_COUNT = (); |
---|
[2] | 67 | |
---|
[11] | 68 | my %CMD_DB = ( |
---|
[133] | 69 | 'help' => \&cmd_help, |
---|
| 70 | 'version' => \&cmd_version, |
---|
| 71 | 'exportdb' => \&cmd_exportdb, |
---|
| 72 | 'updatedb' => \&cmd_updatedb, |
---|
| 73 | 'searchdb' => \&cmd_searchdb, |
---|
| 74 | 'removedb' => \&cmd_removedb, |
---|
| 75 | 'cleandb' => \&cmd_cleandb, |
---|
| 76 | 'search' => \&cmd_search, |
---|
| 77 | 'enable' => \&cmd_enable, |
---|
| 78 | 'disable' => \&cmd_disable, |
---|
| 79 | 'status' => \&cmd_status, |
---|
| 80 | 'updatesw' => \&cmd_updatesw, |
---|
| 81 | 'exportsw' => \&cmd_exportsw, |
---|
| 82 | 'iplocation' => \&cmd_ip_location, |
---|
| 83 | 'ip-free' => \&cmd_ip_free, |
---|
[35] | 84 | 'search-mac-on-switch' => \&cmd_search_mac_on_switch, |
---|
[133] | 85 | 'bad-vlan-id' => \&cmd_bad_vlan_id, |
---|
[239] | 86 | 'poe-enable' => \&cmd_poe_enable, |
---|
| 87 | 'poe-disable' => \&cmd_poe_disable, |
---|
| 88 | 'poe-status' => \&cmd_poe_status, |
---|
[238] | 89 | 'port-setvlan' => \&cmd_port_setvlan, |
---|
| 90 | 'port-getvlan' => \&cmd_port_getvlan, |
---|
| 91 | 'vlan-setname' => \&cmd_vlan_setname, |
---|
| 92 | 'vlan-getname' => \&cmd_vlan_getname, |
---|
| 93 | 'vlan-list' => \&cmd_vlan_list, |
---|
[305] | 94 | 'host-setlocation' => \&cmd_host_setlocation, |
---|
[142] | 95 | 'rebootsw' => \&cmd_rebootsw, |
---|
[2] | 96 | ); |
---|
| 97 | |
---|
[218] | 98 | #Readonly my %INTERNAL_PORT_MAP => ( |
---|
| 99 | # 0 => 'A', |
---|
| 100 | # 1 => 'B', |
---|
| 101 | # 2 => 'C', |
---|
| 102 | # 3 => 'D', |
---|
| 103 | # 4 => 'E', |
---|
| 104 | # 5 => 'F', |
---|
| 105 | # 6 => 'G', |
---|
| 106 | # 7 => 'H', |
---|
| 107 | # ); |
---|
| 108 | #Readonly my %INTERNAL_PORT_MAP_REV => reverse %INTERNAL_PORT_MAP; |
---|
[2] | 109 | |
---|
[63] | 110 | Readonly my %SWITCH_KIND => ( |
---|
[128] | 111 | # HP |
---|
[308] | 112 | J3299A => { type => 1, model => 'HP224M', match => 'HP J3299A ProCurve Switch 224M', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 113 | J4120A => { type => 1, model => 'HP1600M', match => 'HP J4120A ProCurve Switch 1600M', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 114 | J9029A => { type => 1, model => 'HP1800-8G', match => 'PROCURVE J9029A', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 115 | J9449A => { type => 1, model => 'HP1810-8G', match => 'HP ProCurve 1810G - 8 GE', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 116 | J4093A => { type => 1, model => 'HP2424M', match => 'HP J4093A ProCurve Switch 2424M', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 117 | J9279A => { type => 1, model => 'HP2510G-24', match => 'ProCurve J9279A Switch 2510G-24', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 118 | J9280A => { type => 1, model => 'HP2510G-48', match => 'ProCurve J9280A Switch 2510G-48', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 119 | J4813A => { type => 1, model => 'HP2524', match => 'HP J4813A ProCurve Switch 2524', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 120 | J4900A => { type => 1, model => 'HP2626A', match => 'HP J4900A ProCurve Switch 2626', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 121 | J4900B => { type => 1, model => 'HP2626B', match => 'J4900B.+?Switch 2626', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, # ProCurve J4900B Switch 2626 # HP J4900B ProCurve Switch 2626 |
---|
| 122 | J4899B => { type => 1, model => 'HP2650', match => 'ProCurve J4899B Switch 2650', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 123 | J9021A => { type => 1, model => 'HP2810-24G', match => 'ProCurve J9021A Switch 2810-24G', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 124 | J9022A => { type => 1, model => 'HP2810-48G', match => 'ProCurve J9022A Switch 2810-48G', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 125 | J8692A => { type => 1, model => 'HP3500-24G', match => 'J8692A Switch 3500yl-24G', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 126 | J4903A => { type => 1, model => 'HP2824', match => 'J4903A.+?Switch 2824,', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 127 | J4110A => { type => 1, model => 'HP8000M', match => 'HP J4110A ProCurve Switch 8000M', revision => qr{ProCurve .*?, revision (\w[\d\.]+?), ROM}, }, |
---|
| 128 | JE074A => { type => 2, model => 'HP5120-24G', match => 'HP Comware.+?A5120-24G EI Switch', revision => qr{Comware .*? Version (\d[\d\.]+?) Release}, }, |
---|
| 129 | JE069A => { type => 2, model => 'HP5120-48G', match => 'HP Comware.+?A5120-48G EI Switch', revision => qr{Comware .*? Version (\d[\d\.]+?) Release}, }, |
---|
| 130 | JD377A => { type => 2, model => 'HP5500-24G', match => 'HP Comware.+?A5500-24G EI Switch', revision => qr{Comware .*? Version (\d[\d\.]+?) Release}, }, |
---|
| 131 | JD374A => { type => 2, model => 'HP5500-24F', match => 'HP Comware.+?A5500-24G-SFP EI ', revision => qr{Comware .*? Version (\d[\d\.]+?) Release}, }, |
---|
[128] | 132 | # BayStack |
---|
[171] | 133 | BS350T => { type => 1, model => 'BS350T', match => 'BayStack 350T HW' }, |
---|
[128] | 134 | # Nexans |
---|
[308] | 135 | N3483G => { type => 2, model => 'NA3483-6G', match => 'GigaSwitch V3 TP SFP-I 48.+ ES3', revision => qr{GigaSwitch .*?/SECURITY/V(\d[\d\.]+\w?)\)}, }, |
---|
| 136 | N3483P => { type => 2, model => 'NA3483-6P', match => 'GigaSwitch V3 TP.PSE.+ 48/54V ES3', revision => qr{GigaSwitch .*?/SECURITY/V(\d[\d\.]+\w?)\)}, }, # GigaSwitch V3 TP(PSE+) SFP-I 48/54V ES3 (HW3/ENHANCED/SECURITY/V4.10C) |
---|
[145] | 137 | # DELL |
---|
[308] | 138 | PC7024 => { type => 2, model => 'DPC7024', match => 'PowerConnect 7024,.+?VxWorks', revision => qr{PowerConnect .*?, (\d[\d\.]+?), VxWorks}, }, |
---|
| 139 | N2048 => { type => 2, model => 'DN2048', match => 'Dell Networking N2048,', revision => qr{Dell Networking .*?, (\d[\d\.]+?), Linux}, }, |
---|
| 140 | N4032F => { type => 2, model => 'DN4032F', match => 'Dell Networking N4032F,', revision => qr{Dell Networking .*?, (\d[\d\.]+?), Linux}, }, |
---|
| 141 | N4064F => { type => 2, model => 'DN4064F', match => 'Dell Networking N4064F,', revision => qr{Dell Networking .*?, (\d[\d\.]+?), Linux}, }, |
---|
[128] | 142 | # 3COM |
---|
[171] | 143 | 'H3C5500' => { type => 1, model => 'H3C5500', match => 'H3C S5500-SI Series' }, |
---|
| 144 | '3C17203' => { type => 1, model => '3C17203', match => '3Com SuperStack 3 24-Port' }, |
---|
| 145 | '3C17204' => { type => 1, model => '3C17204', match => '3Com SuperStack 3 48-Port' }, |
---|
| 146 | '3CR17562-91' => { type => 1, model => '3CR17562-91', match => '3Com Switch 4500 50-Port' }, |
---|
| 147 | '3CR17255-91' => { type => 1, model => '3CR17255-91', match => '3Com Switch 5500G-EI 48-Port' }, |
---|
| 148 | '3CR17251-91' => { type => 1, model => '3CR17251-91', match => '3Com Switch 5500G-EI 48-Port' }, |
---|
| 149 | '3CR17571-91' => { type => 1, model => '3CR17571-91', match => '3Com Switch 4500 PWR 26-Port' }, |
---|
| 150 | '3CRWX220095A' => { type => 1, model => '3CRWX220095A', match => '3Com Wireless LAN Controller' }, |
---|
| 151 | '3CR17254-91' => { type => 1, model => '3CR17254-91', match => '3Com Switch 5500G-EI 24-Port' }, |
---|
| 152 | '3CRS48G-24S-91' => { type => 1, model => '3CRS48G-24S-91', match => '3Com Switch 4800G 24-Port' }, |
---|
| 153 | '3CRS48G-48S-91' => { type => 1, model => '3CRS48G-48S-91', match => '3Com Switch 4800G 48-Port' }, |
---|
| 154 | '3C17708' => { type => 1, model => '3C17708', match => '3Com Switch 4050' }, |
---|
| 155 | '3C17709' => { type => 1, model => '3C17709', match => '3Com Switch 4060' }, |
---|
| 156 | '3C17707' => { type => 1, model => '3C17707', match => '3Com Switch 4070' }, |
---|
| 157 | '3CR17258-91' => { type => 1, model => '3CR17258-91', match => '3Com Switch 5500G-EI 24-Port SFP' }, |
---|
| 158 | '3CR17181-91' => { type => 1, model => '3CR17181-91', match => '3Com Switch 5500-EI 28-Port FX' }, |
---|
| 159 | '3CR17252-91' => { type => 1, model => '3CR17252-91', match => '3Com Switch 5500G-EI PWR 24-Port' }, |
---|
| 160 | '3CR17253-91' => { type => 1, model => '3CR17253-91', match => '3Com Switch 5500G-EI PWR 48-Port' }, |
---|
| 161 | '3CR17250-91' => { type => 1, model => '3CR17250-91', match => '3Com Switch 5500G-EI 24-Port' }, |
---|
| 162 | '3CR17561-91' => { type => 1, model => '3CR17561-91', match => '3Com Switch 4500 26-Port' }, |
---|
| 163 | '3CR17572-91' => { type => 1, model => '3CR17572-91', match => '3Com Switch 4500 PWR 50-Port' }, |
---|
| 164 | '3C17702-US' => { type => 1, model => '3C17702-US', match => '3Com Switch 4900 SX' }, |
---|
| 165 | '3C17700' => { type => 1, model => '3C17700', match => '3Com Switch 4900' }, |
---|
[18] | 166 | ); |
---|
[63] | 167 | |
---|
| 168 | Readonly my %OID_NUMBER => ( |
---|
[68] | 169 | sysDescription => '1.3.6.1.2.1.1.1.0', |
---|
| 170 | sysName => '1.3.6.1.2.1.1.5.0', |
---|
| 171 | sysContact => '1.3.6.1.2.1.1.4.0', |
---|
| 172 | sysLocation => '1.3.6.1.2.1.1.6.0', |
---|
[246] | 173 | searchPort1 => '1.3.6.1.2.1.17.4.3.1.2', # BRIDGE-MIB (802.1D). |
---|
| 174 | searchPort2 => '1.3.6.1.2.1.17.7.1.2.2.1.2', # Q-BRIDGE-MIB (802.1Q) add 0 if unknown vlan id |
---|
| 175 | vlanPortDefault => '1.3.6.1.2.1.17.7.1.4.5.1.1', # dot1qPvid |
---|
| 176 | vlanStatus => '1.3.6.1.2.1.17.7.1.4.3.1.5', # integer 4 Create, 6 Destroy |
---|
| 177 | vlanName => '1.3.6.1.2.1.17.7.1.4.3.1.1', # string |
---|
| 178 | HPicfReset => '1.3.6.1.4.1.11.2.14.11.1.4.1', # HP reboot switch |
---|
| 179 | ifIndex => '1.3.6.1.2.1.17.1.4.1.2', # dot1dBasePortIfIndex - Interface index redirection |
---|
| 180 | ifName => '1.3.6.1.2.1.31.1.1.1.1', # Interface name (give port number) |
---|
| 181 | portUpDown => '1.3.6.1.2.1.2.2.1.7', # 1.3.6.1.2.1.2.2.1.7.NoPort = 1 (up) = 2 (down) |
---|
| 182 | poeState => '1.3.6.1.2.1.105.1.1.1.3.1', # 1.3.6.1.2.1.105.1.1.1.3.1.NoPort = 1 (poe up) = 2 (poe down) - Cisco and Zyxel |
---|
| 183 | NApoeState => '1.3.6.1.4.1.266.20.3.1.1.21', # .NoPort = 2 (poe off) = 8 (poe atHighPower) - Nexans |
---|
[240] | 184 | ifAggregator => '1.2.840.10006.300.43.1.2.1.1.12', # dot3adAggPortSelectedAggID - 0 not part of an Aggregator - Ciso Dell HP Comware - See https://stackoverflow.com/questions/14960157/how-to-map-portchannel-to-interfaces-via-snmp https://gist.github.com/bldewolf/6314435 |
---|
[19] | 185 | ); |
---|
[18] | 186 | |
---|
[206] | 187 | Readonly my %PORT_UPDOWN => ( |
---|
| 188 | 1 => 'enable', |
---|
| 189 | 2 => 'disable', |
---|
| 190 | ); |
---|
| 191 | |
---|
[63] | 192 | Readonly my $RE_MAC_ADDRESS => qr{ [0-9,A-Z]{2} : [0-9,A-Z]{2} : [0-9,A-Z]{2} : [0-9,A-Z]{2} : [0-9,A-Z]{2} : [0-9,A-Z]{2} }xms; |
---|
| 193 | Readonly my $RE_IPv4_ADDRESS => qr{ [0-9]{1,3} \. [0-9]{1,3} \. [0-9]{1,3} \. [0-9]{1,3} }xms; |
---|
| 194 | |
---|
[223] | 195 | Readonly my $RE_FLOAT_HOSTNAME => $DEFAULT{'float-regex'} || qr{ ^float }xms; |
---|
[63] | 196 | |
---|
[248] | 197 | Readonly my $SEP_AGGREGATOR_PORT => ','; # : is already use to join switch and port |
---|
| 198 | Readonly my $SEP_SWITCH_PORT => ':'; |
---|
[246] | 199 | |
---|
| 200 | |
---|
[218] | 201 | ################################################################ |
---|
[206] | 202 | # main program |
---|
[218] | 203 | ################################################################ |
---|
[2] | 204 | |
---|
[11] | 205 | my $cmd = shift @ARGV || 'help'; |
---|
| 206 | if (defined $CMD_DB{$cmd}) { |
---|
| 207 | $CMD_DB{$cmd}->(@ARGV); |
---|
[2] | 208 | } |
---|
| 209 | else { |
---|
[63] | 210 | print {*STDERR} "klask: command $cmd not found\n\n"; |
---|
[310] | 211 | $CMD_DB{'help'}->(); |
---|
[2] | 212 | exit 1; |
---|
| 213 | } |
---|
| 214 | |
---|
| 215 | exit; |
---|
| 216 | |
---|
[218] | 217 | ################################################################ |
---|
[206] | 218 | # subroutine |
---|
[218] | 219 | ################################################################ |
---|
[206] | 220 | |
---|
[218] | 221 | #--------------------------------------------------------------- |
---|
[26] | 222 | sub test_running_environnement { |
---|
| 223 | die "Configuration file $KLASK_CFG_FILE does not exists. Klask need it !\n" if not -e "$KLASK_CFG_FILE"; |
---|
| 224 | die "Var folder $KLASK_VAR does not exists. Klask need it !\n" if not -d "$KLASK_VAR"; |
---|
[63] | 225 | return; |
---|
[26] | 226 | } |
---|
| 227 | |
---|
[218] | 228 | #--------------------------------------------------------------- |
---|
[34] | 229 | sub test_switchdb_environnement { |
---|
| 230 | die "Switch database $KLASK_SW_FILE does not exists. Launch updatesw before this command !\n" if not -e "$KLASK_SW_FILE"; |
---|
[63] | 231 | return; |
---|
[34] | 232 | } |
---|
| 233 | |
---|
[218] | 234 | #--------------------------------------------------------------- |
---|
[34] | 235 | sub test_maindb_environnement { |
---|
| 236 | die "Main database $KLASK_DB_FILE does not exists. Launch updatedb before this command !\n" if not -e "$KLASK_DB_FILE"; |
---|
[63] | 237 | return; |
---|
[34] | 238 | } |
---|
| 239 | |
---|
[218] | 240 | #--------------------------------------------------------------- |
---|
[2] | 241 | # fast ping dont l'objectif est de remplir la table arp de la machine |
---|
[111] | 242 | sub fast_ping { |
---|
[68] | 243 | # Launch this command without waiting... |
---|
[258] | 244 | system "fping -q -c 1 @_ > /dev/null 2>&1 &"; |
---|
[63] | 245 | return; |
---|
[2] | 246 | } |
---|
| 247 | |
---|
[218] | 248 | #--------------------------------------------------------------- |
---|
[63] | 249 | sub shell_command { |
---|
| 250 | my $cmd = shift; |
---|
| 251 | |
---|
[64] | 252 | my $fh = new FileHandle; |
---|
| 253 | my $result = ''; |
---|
[96] | 254 | open $fh, q{-|}, "LANG=C $cmd" or die "Can't exec $cmd\n"; |
---|
[64] | 255 | $result .= <$fh>; |
---|
[63] | 256 | close $fh; |
---|
| 257 | chomp $result; |
---|
| 258 | return $result; |
---|
| 259 | } |
---|
| 260 | |
---|
[218] | 261 | #--------------------------------------------------------------- |
---|
[2] | 262 | # donne l'@ ip, dns, arp en fonction du dns OU de l'ip |
---|
| 263 | sub resolve_ip_arp_host { |
---|
| 264 | my $param_ip_or_host = shift; |
---|
[63] | 265 | my $interface = shift || q{*}; |
---|
| 266 | my $type = shift || q{fast}; |
---|
[186] | 267 | my $already = shift || q{yes}; |
---|
[2] | 268 | |
---|
| 269 | my %ret = ( |
---|
| 270 | hostname_fq => 'unknow', |
---|
| 271 | ipv4_address => '0.0.0.0', |
---|
| 272 | mac_address => 'unknow', |
---|
| 273 | ); |
---|
| 274 | |
---|
[68] | 275 | # perl -MSocket -E 'say inet_ntoa(scalar gethostbyname("tech7meylan.hmg.inpg.fr"))' |
---|
| 276 | my $packed_ip = scalar gethostbyname($param_ip_or_host); |
---|
| 277 | return %ret if not defined $packed_ip; |
---|
[261] | 278 | $ret{'ipv4_address'} = inet_ntoa($packed_ip); |
---|
| 279 | #if ($ret{'ipv4_address'} !~ m/$RE_IPv4_ADDRESS/) { |
---|
| 280 | # print "Error: for computer $param_ip_or_host on interface $interface, IP $ret{'ipv4_address'} is not valide\n"; |
---|
[197] | 281 | # return %ret; |
---|
| 282 | # } |
---|
[68] | 283 | |
---|
| 284 | # perl -MSocket -E 'say scalar gethostbyaddr(inet_aton("194.254.66.240"), AF_INET)' |
---|
[186] | 285 | my $hostname_fq = scalar gethostbyaddr($packed_ip, AF_INET) if $already eq 'yes'; |
---|
[261] | 286 | $ret{'hostname_fq'} = $hostname_fq if defined $hostname_fq; |
---|
[68] | 287 | |
---|
| 288 | # my $cmd = q{grep -he '\b} . $param_ip_or_host . q{\b' } . "/var/lib/arpwatch/$interface.dat | sort -rn -k 3,3 | head -1"; |
---|
[261] | 289 | #my $cmd = q{grep -he '\b} . $ret{'ipv4_address'} . q{\b' } . "/var/lib/arpwatch/$interface.dat | sort -rn -k 3,3 | head -1"; |
---|
| 290 | my $cmd = q{grep -He '\b} . $ret{'ipv4_address'} . q{\b' } . "/var/lib/arpwatch/$interface.dat" . '| sed -e \'s|^/var/lib/arpwatch/\(.*\)\.dat:|\1 |;\' | sort -rn -k 4,4 | head -1'; |
---|
[144] | 291 | #grep -He 194.254.66.252 /var/lib/arpwatch/*.dat | sed -e 's|^/var/lib/arpwatch/\(.*\)\.dat:|\1\t|;' | sort -rn -k 4,4 | head -1 |
---|
| 292 | |
---|
[62] | 293 | my $cmd_arpwatch = shell_command $cmd; |
---|
[144] | 294 | #my ($arp, $ip, $timestamp, $host) = split m/ \s+ /xms, $cmd_arpwatch; |
---|
| 295 | my ($interface2, $arp, $ip, $timestamp, $host) = split m/ \s+ /xms, $cmd_arpwatch; |
---|
[44] | 296 | |
---|
[261] | 297 | $ret{'interface'} = $interface2 || $interface; |
---|
| 298 | $ret{'mac_address'} = $arp if $arp; |
---|
| 299 | $ret{'timestamp'} = $timestamp if $timestamp; |
---|
[2] | 300 | |
---|
[63] | 301 | my $nowtimestamp = time; |
---|
[3] | 302 | |
---|
[96] | 303 | if ( $type eq 'fast' and ( not defined $timestamp or $timestamp < ( $nowtimestamp - 45 * 60 ) ) ) { # 45 min |
---|
[261] | 304 | $ret{'mac_address'} = 'unknow'; |
---|
[3] | 305 | return %ret; |
---|
| 306 | } |
---|
| 307 | |
---|
[194] | 308 | # ARP result |
---|
| 309 | # |
---|
| 310 | # LANG=C arp -a 194.254.66.62 -i eth331 |
---|
| 311 | # gw66-62.legi.grenoble-inp.fr (194.254.66.62) at 00:08:7c:bb:0f:c0 [ether] on eth331 |
---|
| 312 | # |
---|
| 313 | # LANG=C ip neigh show to 194.254.66.62 dev eth331 |
---|
| 314 | # 194.254.66.62 lladdr 00:08:7c:bb:0f:c0 REACHABLE |
---|
[197] | 315 | # LANG=C ip neigh show to 194.254.66.62 |
---|
| 316 | # 194.254.66.62 dev eth331 lladdr 00:08:7c:bb:0f:c0 REACHABLE |
---|
[261] | 317 | # my $cmd_arp = shell_command "arp -a $param_ip_or_host -i $ret{'interface'}"; |
---|
[194] | 318 | # if ( $cmd_arp =~ m{ (\S*) \s \( ( $RE_IPv4_ADDRESS ) \) \s at \s ( $RE_MAC_ADDRESS ) }xms ) { |
---|
[261] | 319 | # ( $ret{'hostname_fq'}, $ret{'ipv4_address'}, $ret{'mac_address'} ) = ($1, $2, $3); |
---|
[194] | 320 | # } |
---|
[261] | 321 | if ($ret{'mac_address'} eq 'unknow') { |
---|
[196] | 322 | # Last chance to have the mac_address |
---|
[261] | 323 | if ($ret{'interface'} eq '*') { |
---|
| 324 | my $cmd_arp = shell_command "ip neigh show to $ret{'ipv4_address'}"; |
---|
[197] | 325 | if ( $cmd_arp =~ m{ ^$RE_IPv4_ADDRESS \s dev \s ([\w\d\.\:]+) \s lladdr \s ( $RE_MAC_ADDRESS ) \s }xms ) { |
---|
[261] | 326 | ($ret{'interface'}, $ret{'mac_address'}) = ($1, $2); |
---|
[197] | 327 | } |
---|
[194] | 328 | } |
---|
[197] | 329 | else { |
---|
[261] | 330 | my $cmd_arp = shell_command "ip neigh show to $ret{'ipv4_address'} dev $ret{'interface'}"; |
---|
[197] | 331 | if ( $cmd_arp =~ m{ ^$RE_IPv4_ADDRESS \s lladdr \s ( $RE_MAC_ADDRESS ) \s }xms ) { |
---|
[261] | 332 | $ret{'mac_address'} = $1; |
---|
[197] | 333 | } |
---|
| 334 | } |
---|
[63] | 335 | } |
---|
[2] | 336 | |
---|
[96] | 337 | # Normalize MAC Address |
---|
[261] | 338 | if ($ret{'mac_address'} ne 'unknow') { |
---|
[2] | 339 | my @paquets = (); |
---|
[261] | 340 | for ( split m/ : /xms, $ret{'mac_address'} ) { |
---|
[63] | 341 | my @chars = split m//xms, uc "00$_"; |
---|
[2] | 342 | push @paquets, "$chars[-2]$chars[-1]"; |
---|
| 343 | } |
---|
[261] | 344 | $ret{'mac_address'} = join q{:}, @paquets; |
---|
[2] | 345 | } |
---|
| 346 | |
---|
| 347 | return %ret; |
---|
| 348 | } |
---|
| 349 | |
---|
[246] | 350 | #--------------------------------------------------------------- |
---|
[20] | 351 | # Find Surname of a switch |
---|
| 352 | sub get_switch_model { |
---|
[22] | 353 | my $sw_snmp_description = shift || 'unknow'; |
---|
[169] | 354 | $sw_snmp_description =~ s/[\n\r]/ /g; |
---|
[63] | 355 | |
---|
[20] | 356 | for my $sw_kind (keys %SWITCH_KIND) { |
---|
[310] | 357 | next if not $sw_snmp_description =~ m/$SWITCH_KIND{$sw_kind}->{'match'}/ms; # option xms break search, why ? |
---|
[63] | 358 | |
---|
[309] | 359 | return $SWITCH_KIND{$sw_kind}->{'model'}; |
---|
[20] | 360 | } |
---|
[63] | 361 | |
---|
[22] | 362 | return $sw_snmp_description; |
---|
[20] | 363 | } |
---|
| 364 | |
---|
[218] | 365 | #--------------------------------------------------------------- |
---|
[308] | 366 | # Find Revision Firmware of a switch |
---|
| 367 | sub get_switch_revision { |
---|
| 368 | my $sw_snmp_description = shift || 'unknow'; |
---|
| 369 | $sw_snmp_description =~ s/[\n\r]/ /g; |
---|
| 370 | |
---|
| 371 | for my $sw_kind (keys %SWITCH_KIND) { |
---|
[310] | 372 | next if not $sw_snmp_description =~ m/$SWITCH_KIND{$sw_kind}->{'match'}/ms; # option xms break search, why ? |
---|
[309] | 373 | last if not exists $SWITCH_KIND{$sw_kind}->{'revision'}; |
---|
[308] | 374 | |
---|
[309] | 375 | my ($revision) = $sw_snmp_description =~ m/$SWITCH_KIND{$sw_kind}->{'revision'}/xms; |
---|
[308] | 376 | return $revision || 'unknow'; |
---|
| 377 | } |
---|
| 378 | |
---|
| 379 | return 'unknow'; |
---|
| 380 | } |
---|
| 381 | |
---|
| 382 | #--------------------------------------------------------------- |
---|
[304] | 383 | # Get switch name and switch model |
---|
[4] | 384 | sub init_switch_names { |
---|
[173] | 385 | my ($verbose, $verb_description, $check_hostname, $check_location) = @_; |
---|
[63] | 386 | |
---|
[308] | 387 | printf "%-26s %-25s %s\n",'Switch','Description','Type(Revision)' if $verbose; |
---|
| 388 | print "----------------------------------------------------------------------------------\n" if $verbose; |
---|
[2] | 389 | |
---|
| 390 | INIT_EACH_SWITCH: |
---|
[293] | 391 | for my $sw (my @CLONE = @SWITCH_LIST) { # Make a local clone because some element can be deleted |
---|
[221] | 392 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[14] | 393 | print "$error \n" if $error; |
---|
| 394 | |
---|
[2] | 395 | my $result = $session->get_request( |
---|
[18] | 396 | -varbindlist => [ |
---|
[261] | 397 | $OID_NUMBER{'sysDescription'}, |
---|
| 398 | $OID_NUMBER{'sysName'}, |
---|
| 399 | $OID_NUMBER{'sysContact'}, |
---|
| 400 | $OID_NUMBER{'sysLocation'}, |
---|
[18] | 401 | ] |
---|
[2] | 402 | ); |
---|
[196] | 403 | if (!defined $result) { |
---|
| 404 | printf {*STDERR} "ERROR: %s.\n", $session->error(); |
---|
| 405 | $session->close(); |
---|
| 406 | # Remove bad switch |
---|
[261] | 407 | @SWITCH_LIST = grep { $_->{'hostname'} ne $sw->{'hostname'} } @SWITCH_LIST; |
---|
| 408 | delete $SWITCH_LEVEL{$sw->{'hostname'}} if exists $SWITCH_LEVEL{$sw->{'hostname'}}; |
---|
| 409 | delete $SWITCH_DB{$sw->{'hostname'}} if exists $SWITCH_DB{$sw->{'hostname'}}; |
---|
[196] | 410 | next INIT_EACH_SWITCH; |
---|
| 411 | } |
---|
| 412 | |
---|
[262] | 413 | $sw->{'description'} = $result->{$OID_NUMBER{'sysName'}} || $sw->{'hostname'}; |
---|
[309] | 414 | $sw->{'model'} = get_switch_model($result->{$OID_NUMBER{'sysDescription'}}); |
---|
| 415 | $sw->{'revision'} = get_switch_revision($result->{$OID_NUMBER{'sysDescription'}}); |
---|
| 416 | printf "%-26s 0--------->>>> %-25s %s\n", $sw->{'hostname'}, $sw->{'description'}, $sw->{'model'}.'('.$sw->{'revision'}.')' if $verbose; |
---|
[304] | 417 | |
---|
[170] | 418 | if ($verb_description) { |
---|
[261] | 419 | my $desc = $result->{$OID_NUMBER{'sysDescription'}}; |
---|
[170] | 420 | $desc =~ s/[\n\r]/ /g; |
---|
[308] | 421 | print " +> $sw->{'hostname'} - description: $desc\n"; |
---|
[170] | 422 | } |
---|
[172] | 423 | if ($check_hostname) { |
---|
[261] | 424 | my ($hostname) = split /\./, $sw->{'hostname'}, 2; |
---|
[304] | 425 | print " +> $hostname - error internal hostname: $sw->{'hostname'}\n" if $result->{$OID_NUMBER{'sysName'}} ne $hostname; |
---|
[172] | 426 | } |
---|
[173] | 427 | if ($check_location) { |
---|
[261] | 428 | my $location = $result->{$OID_NUMBER{'sysLocation'}}; |
---|
[174] | 429 | $location =~ s/^"(.+)"$/$1/; |
---|
[304] | 430 | print " +> $sw->{'hostname'} - error location: '$location' -> '$sw->{'location'}'\n" if $location ne $sw->{'location'}; |
---|
[173] | 431 | } |
---|
[304] | 432 | |
---|
[2] | 433 | $session->close; |
---|
| 434 | } |
---|
| 435 | |
---|
| 436 | print "\n" if $verbose; |
---|
[63] | 437 | return; |
---|
[2] | 438 | } |
---|
| 439 | |
---|
[218] | 440 | #--------------------------------------------------------------- |
---|
[246] | 441 | # convert hexa (only 2 digits) to decimal |
---|
| 442 | sub digit_hex2dec { |
---|
[2] | 443 | #00:0F:1F:43:E4:2B |
---|
[63] | 444 | my $car = '00' . uc shift; |
---|
[2] | 445 | |
---|
[4] | 446 | return '00' if $car eq '00UNKNOW'; |
---|
[2] | 447 | my %table = ( |
---|
[62] | 448 | '0'=>'0', '1'=>'1', '2'=>'2', '3'=>'3', '4'=>'4', |
---|
| 449 | '5'=>'5', '6'=>'6', '7'=>'7', '8'=>'8', '9'=>'9', |
---|
[63] | 450 | 'A'=>'10', 'B'=>'11', 'C'=>'12', 'D'=>'13', 'E'=>'14', 'F'=>'15', |
---|
[2] | 451 | ); |
---|
[63] | 452 | my @chars = split m//xms, $car; |
---|
[2] | 453 | return $table{$chars[-2]}*16 + $table{$chars[-1]}; |
---|
| 454 | } |
---|
| 455 | |
---|
[218] | 456 | #--------------------------------------------------------------- |
---|
[136] | 457 | |
---|
| 458 | sub normalize_mac_address { |
---|
| 459 | my $mac_address = shift; |
---|
| 460 | |
---|
[228] | 461 | # D07E-28D1-7AB8 or D07E.28D1.7AB8 or d07e28-d17ab8 |
---|
| 462 | if ($mac_address =~ m{^ (?: [0-9A-Fa-f]{4} [-\.]){2} [0-9A-Fa-f]{4} $}xms |
---|
| 463 | or $mac_address =~ m{^ [0-9A-Fa-f]{6} - [0-9A-Fa-f]{6} $}xms |
---|
| 464 | ) { |
---|
[229] | 465 | $mac_address =~ s/[-\.]//g; |
---|
[139] | 466 | return join q{:}, unpack('(A2)*', uc($mac_address)); |
---|
| 467 | } |
---|
| 468 | |
---|
[136] | 469 | return join q{:}, map { substr( uc("00$_"), -2) } split m/ [:-] /xms, $mac_address; |
---|
| 470 | } |
---|
| 471 | |
---|
[218] | 472 | #--------------------------------------------------------------- |
---|
[246] | 473 | # convert MAC hex address to decimal |
---|
| 474 | sub mac_address_hex2dec { |
---|
[2] | 475 | #00:0F:1F:43:E4:2B |
---|
[86] | 476 | my $mac_address = shift; |
---|
[2] | 477 | |
---|
[86] | 478 | my @paquets = split m/ : /xms, $mac_address; |
---|
[63] | 479 | my $return = q{}; |
---|
[165] | 480 | for (@paquets) { |
---|
[246] | 481 | $return .= q{.} . digit_hex2dec($_); |
---|
[2] | 482 | } |
---|
| 483 | return $return; |
---|
| 484 | } |
---|
| 485 | |
---|
[218] | 486 | #--------------------------------------------------------------- |
---|
[250] | 487 | sub format_aggregator4html { |
---|
| 488 | my $port_hr = shift; |
---|
| 489 | $port_hr =~ s/($SEP_AGGREGATOR_PORT)/: /; # First occurence |
---|
| 490 | $port_hr =~ s/($SEP_AGGREGATOR_PORT)/ /g; # Other occurence |
---|
| 491 | return $port_hr; |
---|
| 492 | } |
---|
| 493 | |
---|
| 494 | #--------------------------------------------------------------- |
---|
| 495 | sub format_aggregator4dot { |
---|
| 496 | my $port_hr = shift; |
---|
| 497 | $port_hr =~ s/($SEP_AGGREGATOR_PORT)/ - /; # First occurence |
---|
[317] | 498 | $port_hr =~ s/($SEP_AGGREGATOR_PORT)/ /g; # Other occurence |
---|
[250] | 499 | return $port_hr; |
---|
| 500 | } |
---|
| 501 | |
---|
| 502 | #--------------------------------------------------------------- |
---|
[317] | 503 | # fqdn_html_breakable change it's parameter, use it like chomp perl function |
---|
| 504 | |
---|
| 505 | sub fqdn_html_breakable { |
---|
| 506 | my $ref_fqdn = \($_[0]); |
---|
| 507 | |
---|
| 508 | # Add HTML <wbr> before every . to permit line break |
---|
[318] | 509 | $$ref_fqdn =~ s{\.}{.<wbr />}g; |
---|
[317] | 510 | } |
---|
| 511 | |
---|
| 512 | #--------------------------------------------------------------- |
---|
[246] | 513 | # return the port and the switch where the computer is connected |
---|
[2] | 514 | sub find_switch_port { |
---|
[86] | 515 | my $mac_address = shift; |
---|
[63] | 516 | my $switch_proposal = shift || q{}; |
---|
[144] | 517 | my $vlan_id = shift || 0; |
---|
[63] | 518 | |
---|
[2] | 519 | my %ret; |
---|
[261] | 520 | $ret{'switch_description'} = 'unknow'; |
---|
[270] | 521 | $ret{'switch_port_id'} = '0'; |
---|
[2] | 522 | |
---|
[86] | 523 | return %ret if $mac_address eq 'unknow';; |
---|
[2] | 524 | |
---|
[196] | 525 | my @switch_search = @SWITCH_LIST; |
---|
[63] | 526 | if ($switch_proposal ne q{}) { |
---|
[196] | 527 | for my $sw (@SWITCH_LIST) { |
---|
[261] | 528 | next if $sw->{'hostname'} ne $switch_proposal; |
---|
[22] | 529 | unshift @switch_search, $sw; |
---|
[2] | 530 | last; |
---|
| 531 | } |
---|
| 532 | } |
---|
| 533 | |
---|
[277] | 534 | my $oid_search_port1 = $OID_NUMBER{'searchPort1'} . mac_address_hex2dec($mac_address); |
---|
| 535 | my $oid_search_port2 = $OID_NUMBER{'searchPort2'} .'.'. $vlan_id . mac_address_hex2dec($mac_address); |
---|
[63] | 536 | |
---|
[2] | 537 | LOOP_ON_SWITCH: |
---|
[22] | 538 | for my $sw (@switch_search) { |
---|
[221] | 539 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[22] | 540 | print "$error \n" if $error; |
---|
| 541 | |
---|
[2] | 542 | my $result = $session->get_request( |
---|
[277] | 543 | -varbindlist => [$oid_search_port1] |
---|
[2] | 544 | ); |
---|
[124] | 545 | if (not defined $result) { |
---|
| 546 | $result = $session->get_request( |
---|
[277] | 547 | -varbindlist => [$oid_search_port2] |
---|
[124] | 548 | ); |
---|
[277] | 549 | $result->{$oid_search_port1} = $result->{$oid_search_port2} if defined $result; |
---|
[124] | 550 | } |
---|
| 551 | |
---|
[277] | 552 | if (not (defined $result and $result->{$oid_search_port1} ne 'noSuchInstance')) { |
---|
[2] | 553 | $session->close; |
---|
| 554 | next LOOP_ON_SWITCH; |
---|
| 555 | } |
---|
| 556 | |
---|
[277] | 557 | my $swport_id = $result->{$oid_search_port1}; |
---|
[271] | 558 | my $swport_hr = snmp_get_switchport_id2hr($session, $swport_id); |
---|
[2] | 559 | |
---|
[150] | 560 | $session->close; |
---|
| 561 | |
---|
| 562 | # IMPORTANT !! |
---|
| 563 | # ceci empeche la detection sur certains port ... |
---|
| 564 | # en effet les switch sont relies entre eux par un cable reseau et du coup |
---|
| 565 | # tous les arp de toutes les machines sont presentes sur ces ports (ceux choisis ici sont les miens) |
---|
| 566 | # cette partie est a ameliore, voir a configurer dans l'entete |
---|
| 567 | # 21->24 45->48 |
---|
| 568 | SWITCH_PORT_IGNORE: |
---|
[310] | 569 | for my $portignore (@{$sw->{'portignore'}}) { |
---|
[167] | 570 | next LOOP_ON_SWITCH if $swport_hr eq $portignore; |
---|
[246] | 571 | my ($swport_hr_limited) = split /$SEP_AGGREGATOR_PORT/, $swport_hr; # Beginning of the swith port (Aggregator) |
---|
[241] | 572 | next LOOP_ON_SWITCH if $swport_hr_limited eq $portignore; |
---|
[150] | 573 | } |
---|
| 574 | |
---|
[261] | 575 | $ret{'switch_hostname'} = $sw->{'hostname'}; |
---|
[262] | 576 | $ret{'switch_description'} = $sw->{'description'}; |
---|
[271] | 577 | $ret{'switch_port_id'} = $swport_id; |
---|
[261] | 578 | $ret{'switch_port_hr'} = $swport_hr; # human readable |
---|
[150] | 579 | |
---|
| 580 | last LOOP_ON_SWITCH; |
---|
[2] | 581 | } |
---|
| 582 | return %ret; |
---|
| 583 | } |
---|
| 584 | |
---|
[218] | 585 | #--------------------------------------------------------------- |
---|
[246] | 586 | # search all the port on all the switches where the computer is detected |
---|
[2] | 587 | sub find_all_switch_port { |
---|
[86] | 588 | my $mac_address = shift; |
---|
[144] | 589 | my $vlan_id = shift || 0; |
---|
[2] | 590 | |
---|
| 591 | my $ret = {}; |
---|
| 592 | |
---|
[86] | 593 | return $ret if $mac_address eq 'unknow'; |
---|
[2] | 594 | |
---|
[277] | 595 | my $oid_search_port1 = $OID_NUMBER{'searchPort1'} . mac_address_hex2dec($mac_address); |
---|
| 596 | my $oid_search_port2 = $OID_NUMBER{'searchPort2'} .'.'. $vlan_id . mac_address_hex2dec($mac_address); |
---|
[2] | 597 | LOOP_ON_ALL_SWITCH: |
---|
[196] | 598 | for my $sw (@SWITCH_LIST) { |
---|
[221] | 599 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[13] | 600 | print "$error \n" if $error; |
---|
| 601 | |
---|
[2] | 602 | my $result = $session->get_request( |
---|
[277] | 603 | -varbindlist => [$oid_search_port1] |
---|
[2] | 604 | ); |
---|
[124] | 605 | if (not defined $result) { |
---|
| 606 | $result = $session->get_request( |
---|
[277] | 607 | -varbindlist => [$oid_search_port2] |
---|
[124] | 608 | ); |
---|
[277] | 609 | $result->{$oid_search_port1} = $result->{$oid_search_port2} if defined $result; |
---|
[124] | 610 | } |
---|
[13] | 611 | |
---|
[277] | 612 | if (defined $result and $result->{$oid_search_port1} ne 'noSuchInstance') { |
---|
| 613 | my $swport_id = $result->{$oid_search_port1}; |
---|
[271] | 614 | my $swport_hr = snmp_get_switchport_id2hr($session, $swport_id); |
---|
[2] | 615 | |
---|
[181] | 616 | SWITCH_PORT_IGNORE: |
---|
[310] | 617 | for my $portignore (@{$sw->{'portignore'}}) { |
---|
[181] | 618 | if ($swport_hr eq $portignore) { |
---|
| 619 | $session->close; |
---|
| 620 | next LOOP_ON_ALL_SWITCH |
---|
| 621 | } |
---|
| 622 | } |
---|
| 623 | |
---|
[261] | 624 | $ret->{$sw->{'hostname'}} = {}; |
---|
| 625 | $ret->{$sw->{'hostname'}}{'hostname'} = $sw->{'hostname'}; |
---|
[262] | 626 | $ret->{$sw->{'hostname'}}{'description'} = $sw->{'description'}; |
---|
[272] | 627 | $ret->{$sw->{'hostname'}}{'port_id'} = $swport_id; |
---|
[261] | 628 | $ret->{$sw->{'hostname'}}{'port_hr'} = $swport_hr; |
---|
[2] | 629 | } |
---|
| 630 | |
---|
| 631 | $session->close; |
---|
| 632 | } |
---|
| 633 | return $ret; |
---|
| 634 | } |
---|
| 635 | |
---|
[218] | 636 | #--------------------------------------------------------------- |
---|
[2] | 637 | sub get_list_network { |
---|
| 638 | |
---|
[262] | 639 | return keys %{$KLASK_CFG->{'network'}}; |
---|
[2] | 640 | } |
---|
| 641 | |
---|
[218] | 642 | #--------------------------------------------------------------- |
---|
[2] | 643 | sub get_current_interface { |
---|
[113] | 644 | my $vlan_name = shift; |
---|
[2] | 645 | |
---|
[262] | 646 | return $KLASK_CFG->{'network'}{$vlan_name}{'interface'}; |
---|
[2] | 647 | } |
---|
[63] | 648 | |
---|
[218] | 649 | #--------------------------------------------------------------- |
---|
[144] | 650 | sub get_current_vlan_id { |
---|
| 651 | my $vlan_name = shift; |
---|
| 652 | |
---|
[262] | 653 | return 0 if not exists $KLASK_CFG->{'network'}{$vlan_name}; |
---|
| 654 | return $KLASK_CFG->{'network'}{$vlan_name}{'vlan-id'}; |
---|
[144] | 655 | } |
---|
| 656 | |
---|
[218] | 657 | #--------------------------------------------------------------- |
---|
[179] | 658 | sub get_current_scan_mode { |
---|
| 659 | my $vlan_name = shift; |
---|
| 660 | |
---|
[262] | 661 | return $KLASK_CFG->{'network'}{$vlan_name}{'scan-mode'} || $DEFAULT{'scan-mode'} || 'active'; |
---|
[179] | 662 | } |
---|
| 663 | |
---|
[218] | 664 | #--------------------------------------------------------------- |
---|
[144] | 665 | sub get_current_vlan_name_for_interface { |
---|
| 666 | my $interface = shift; |
---|
| 667 | |
---|
[262] | 668 | for my $vlan_name (keys %{$KLASK_CFG->{'network'}}) { |
---|
| 669 | next if $KLASK_CFG->{'network'}{$vlan_name}{'interface'} ne $interface; |
---|
[144] | 670 | return $vlan_name; |
---|
| 671 | } |
---|
| 672 | } |
---|
| 673 | |
---|
[218] | 674 | #--------------------------------------------------------------- |
---|
[2] | 675 | # liste l'ensemble des adresses ip d'un réseau |
---|
| 676 | sub get_list_ip { |
---|
[113] | 677 | my @vlan_name = @_; |
---|
[2] | 678 | |
---|
| 679 | my $cidrlist = Net::CIDR::Lite->new; |
---|
| 680 | |
---|
[113] | 681 | for my $net (@vlan_name) { |
---|
[262] | 682 | my @line = @{$KLASK_CFG->{'network'}{$net}{'ip-subnet'}}; |
---|
[2] | 683 | for my $cmd (@line) { |
---|
[209] | 684 | for my $method (keys %{$cmd}) { |
---|
[2] | 685 | $cidrlist->add_any($cmd->{$method}) if $method eq 'add'; |
---|
| 686 | } |
---|
| 687 | } |
---|
| 688 | } |
---|
| 689 | |
---|
[4] | 690 | my @res = (); |
---|
[2] | 691 | |
---|
| 692 | for my $cidr ($cidrlist->list()) { |
---|
| 693 | my $net = new NetAddr::IP $cidr; |
---|
[63] | 694 | for my $ip (@{$net}) { |
---|
| 695 | $ip =~ s{ /32 }{}xms; |
---|
[2] | 696 | push @res, $ip; |
---|
| 697 | } |
---|
| 698 | } |
---|
| 699 | |
---|
| 700 | return @res; |
---|
| 701 | } |
---|
| 702 | |
---|
[218] | 703 | #--------------------------------------------------------------- |
---|
[9] | 704 | # liste l'ensemble des routeurs du réseau |
---|
| 705 | sub get_list_main_router { |
---|
[113] | 706 | my @vlan_name = @_; |
---|
[9] | 707 | |
---|
| 708 | my @res = (); |
---|
| 709 | |
---|
[113] | 710 | for my $net (@vlan_name) { |
---|
[262] | 711 | push @res, $KLASK_CFG->{'network'}{$net}{'main-router'}; |
---|
[9] | 712 | } |
---|
| 713 | |
---|
| 714 | return @res; |
---|
| 715 | } |
---|
| 716 | |
---|
[218] | 717 | #--------------------------------------------------------------- |
---|
[214] | 718 | sub normalize_port_human_readable { |
---|
[150] | 719 | my $sw_port_hr = shift; |
---|
| 720 | |
---|
[214] | 721 | # Manufacturer abbreviation |
---|
[162] | 722 | $sw_port_hr =~ s/^Bridge-Aggregation/Br/i; |
---|
| 723 | $sw_port_hr =~ s/^Port-Channel/Po/i; |
---|
| 724 | $sw_port_hr =~ s/^Forty-?GigabitEthernet/Fo/i; |
---|
| 725 | $sw_port_hr =~ s/^Ten-?GigabitEthernet/Te/i; |
---|
| 726 | $sw_port_hr =~ s/^GigabitEthernet/Gi/i; |
---|
| 727 | $sw_port_hr =~ s/^FastEthernet/Fa/i; |
---|
[150] | 728 | |
---|
[214] | 729 | # Customer abbreviation |
---|
| 730 | $sw_port_hr =~ s/^Ten/Te/i; |
---|
| 731 | $sw_port_hr =~ s/^Giga/Gi/i; |
---|
| 732 | |
---|
[215] | 733 | return ucfirst $sw_port_hr; |
---|
[150] | 734 | } |
---|
| 735 | |
---|
[218] | 736 | #--------------------------------------------------------------- |
---|
[220] | 737 | sub snmp_get_rwsession { |
---|
| 738 | my ($sw) = @_; |
---|
| 739 | |
---|
[221] | 740 | my %session = %{$sw->{'snmp_param_session'}}; |
---|
| 741 | $session{-community} = $sw->{'community-rw'} || $DEFAULT{'community-rw'} || 'private'; |
---|
[220] | 742 | return %session; |
---|
| 743 | } |
---|
| 744 | |
---|
| 745 | #--------------------------------------------------------------- |
---|
[271] | 746 | sub snmp_get_switchport_id2hr { |
---|
| 747 | my ($snmp_session, $swport_id) = @_; |
---|
[198] | 748 | |
---|
[271] | 749 | # On H3C, port id (port_id) and port index (port_ix) are not the same |
---|
[242] | 750 | # Double SNMP request to get the name |
---|
[271] | 751 | # First get the index, second get the name (port_hr) |
---|
[244] | 752 | |
---|
[277] | 753 | my $oid_search_ix = $OID_NUMBER{'ifIndex'} .'.'. $swport_id; |
---|
[271] | 754 | my $result_ix = $snmp_session->get_request( |
---|
[277] | 755 | -varbindlist => [$oid_search_ix] |
---|
[244] | 756 | ); |
---|
| 757 | |
---|
[271] | 758 | my $swport_ix = $swport_id; |
---|
[277] | 759 | $swport_ix = $result_ix->{$oid_search_ix} if defined $result_ix; |
---|
[157] | 760 | |
---|
[271] | 761 | return snmp_get_switchport_ix2hr($snmp_session, $swport_ix); |
---|
[244] | 762 | } |
---|
[242] | 763 | |
---|
[244] | 764 | #--------------------------------------------------------------- |
---|
[271] | 765 | sub snmp_get_switchport_ix2hr { |
---|
| 766 | my ($snmp_session, $swport_ix) = @_; |
---|
[244] | 767 | |
---|
[277] | 768 | my $oid_search_hr = $OID_NUMBER{'ifName'} .'.'. $swport_ix; |
---|
[157] | 769 | my $result_hr = $snmp_session->get_request( |
---|
[277] | 770 | -varbindlist => [$oid_search_hr] |
---|
[154] | 771 | ); |
---|
[271] | 772 | my $swport_hr = $swport_ix; |
---|
[277] | 773 | $swport_hr = normalize_port_human_readable($result_hr->{$oid_search_hr}) if defined $result_hr; |
---|
[240] | 774 | |
---|
| 775 | # Aggregator port |
---|
| 776 | if ($swport_hr =~ m/^(Trk|Br|Po)/) { |
---|
[277] | 777 | my $oid_search_index = $OID_NUMBER{'ifAggregator'}; # base OID |
---|
| 778 | my @args = ( -varbindlist => [$oid_search_index]); |
---|
[240] | 779 | LOOP_ON_OID_PORT: |
---|
| 780 | while ( defined $snmp_session->get_next_request(@args) ) { |
---|
| 781 | my ($oid_current) = $snmp_session->var_bind_names; |
---|
[277] | 782 | last LOOP_ON_OID_PORT if not Net::SNMP::oid_base_match($oid_search_index, $oid_current); |
---|
[240] | 783 | |
---|
| 784 | # IEEE8023-LAG-MIB::dot3adAggPortSelectedAggID.28 = INTEGER: 337 |
---|
| 785 | # IEEE8023-LAG-MIB::dot3adAggPortAttachedAggID.28 = INTEGER: 337 |
---|
[242] | 786 | my $port_aggregator_index = $snmp_session->var_bind_list->{$oid_current}; |
---|
[271] | 787 | my ($current_port_ix) = reverse split /\./, $oid_current; # last number |
---|
[240] | 788 | |
---|
| 789 | # prepare next loop item |
---|
| 790 | @args = (-varbindlist => [$oid_current]); |
---|
| 791 | |
---|
[242] | 792 | next LOOP_ON_OID_PORT if $port_aggregator_index == 0; |
---|
[271] | 793 | next LOOP_ON_OID_PORT if not $port_aggregator_index == $swport_ix; |
---|
[240] | 794 | |
---|
[271] | 795 | my $current_port_name = snmp_get_switchport_ix2hr($snmp_session, $current_port_ix); |
---|
[246] | 796 | $swport_hr .= "$SEP_AGGREGATOR_PORT$current_port_name"; |
---|
[240] | 797 | } |
---|
| 798 | } |
---|
[154] | 799 | return $swport_hr; |
---|
| 800 | } |
---|
| 801 | |
---|
[218] | 802 | #--------------------------------------------------------------- |
---|
[213] | 803 | # Reverse search port number |
---|
[271] | 804 | sub snmp_get_switchport_hr2id { |
---|
[213] | 805 | my ($snmp_session, $swport_hr, $verbose) = @_; |
---|
| 806 | |
---|
[240] | 807 | # Split for Aggregator port |
---|
[245] | 808 | # Keep only the Aggregator part |
---|
[246] | 809 | ($swport_hr) = split /$SEP_AGGREGATOR_PORT/, $swport_hr; |
---|
[240] | 810 | |
---|
[271] | 811 | my $swport_id = $swport_hr; |
---|
[246] | 812 | # direct return if already numeric (next loop is expensive) / old or simple switch |
---|
[271] | 813 | return $swport_id if $swport_id =~ m/^\d+$/; |
---|
[213] | 814 | |
---|
[277] | 815 | my $oid_search_ix = $OID_NUMBER{'ifIndex'}; # base OID |
---|
| 816 | my @args = ( -varbindlist => [$oid_search_ix]); |
---|
[217] | 817 | LOOP_ON_OID_PORT: |
---|
[213] | 818 | while ( defined $snmp_session->get_next_request(@args) ) { |
---|
| 819 | my ($oid_current) = $snmp_session->var_bind_names; |
---|
[277] | 820 | last LOOP_ON_OID_PORT if not Net::SNMP::oid_base_match($oid_search_ix, $oid_current); |
---|
[290] | 821 | |
---|
[213] | 822 | my $port_ifIndex = $snmp_session->var_bind_list->{$oid_current}; |
---|
[271] | 823 | my ($port_ix) = reverse split /\./, $oid_current; # last number |
---|
[213] | 824 | printf "PORT1: %s => %s\n", $oid_current, $port_ifIndex if $verbose; |
---|
| 825 | |
---|
[217] | 826 | # prepare next loop item |
---|
[213] | 827 | @args = (-varbindlist => [$oid_current]); |
---|
[290] | 828 | |
---|
[277] | 829 | my $oid_search_ifName = $OID_NUMBER{'ifName'} .'.'. $port_ifIndex; |
---|
| 830 | my $result = $snmp_session->get_request(-varbindlist => [$oid_search_ifName]); |
---|
[217] | 831 | next LOOP_ON_OID_PORT if not defined $result; |
---|
[290] | 832 | |
---|
[277] | 833 | my $current_port_hr = normalize_port_human_readable($result->{$oid_search_ifName}); |
---|
| 834 | printf "PORT2: $oid_search_ifName => $current_port_hr\n" if $verbose; |
---|
[214] | 835 | if ($current_port_hr eq $swport_hr) { |
---|
[271] | 836 | print "PORT3: $current_port_hr <-> $port_ix\n" if $verbose; |
---|
[290] | 837 | |
---|
[217] | 838 | # return port number ifIndex need by OID portUpDown |
---|
[271] | 839 | $swport_id = $port_ifIndex; # other possible value could be $port_ix |
---|
[217] | 840 | last LOOP_ON_OID_PORT; |
---|
[213] | 841 | } |
---|
| 842 | } |
---|
[271] | 843 | return $swport_id; |
---|
[213] | 844 | } |
---|
| 845 | |
---|
[218] | 846 | #--------------------------------------------------------------- |
---|
[237] | 847 | # Get the list of all the VLAN define on a switch |
---|
| 848 | sub snmp_get_vlan_list { |
---|
| 849 | my ($snmp_session, $verbose) = @_; |
---|
| 850 | |
---|
[275] | 851 | my %vlandb = (); # Hash vlan number => vlan name |
---|
[237] | 852 | |
---|
[277] | 853 | my $oid_search_index = $OID_NUMBER{'vlanName'}; # base OID |
---|
| 854 | my @args = ( -varbindlist => [$oid_search_index]); |
---|
[237] | 855 | LOOP_ON_VLAN: |
---|
| 856 | while ( defined $snmp_session->get_next_request(@args) ) { |
---|
| 857 | my ($oid_current) = $snmp_session->var_bind_names; |
---|
[277] | 858 | last LOOP_ON_VLAN if not Net::SNMP::oid_base_match($oid_search_index, $oid_current); |
---|
[237] | 859 | |
---|
| 860 | my $vlan_name = $snmp_session->var_bind_list->{$oid_current}; |
---|
[275] | 861 | my ($vlan_id) = reverse split /\./, $oid_current; # last number |
---|
[237] | 862 | printf "VLAN: %s => %s\n", $oid_current, $vlan_name if $verbose; |
---|
| 863 | |
---|
[275] | 864 | $vlandb{$vlan_id} = $vlan_name; |
---|
[237] | 865 | |
---|
| 866 | # prepare next loop item |
---|
| 867 | @args = (-varbindlist => [$oid_current]); |
---|
| 868 | } |
---|
[275] | 869 | return %vlandb; |
---|
[237] | 870 | } |
---|
| 871 | |
---|
| 872 | #--------------------------------------------------------------- |
---|
[151] | 873 | # Load computer database |
---|
[150] | 874 | sub computerdb_load { |
---|
| 875 | my $computerdb = YAML::Syck::LoadFile("$KLASK_DB_FILE"); |
---|
[151] | 876 | |
---|
| 877 | LOOP_ON_IP_ADDRESS: |
---|
| 878 | for my $ip (keys %{$computerdb}) { |
---|
| 879 | |
---|
[274] | 880 | # Rename switch_port -> switch_port_id (2017/09/15) |
---|
[270] | 881 | if (not exists $computerdb->{$ip}{'switch_port_id' and exists $computerdb->{$ip}{'switch_port'}}) { |
---|
| 882 | $computerdb->{$ip}{'switch_port_id'} = $computerdb->{$ip}{'switch_port'} if defined $computerdb->{$ip}{'switch_port'}; |
---|
[274] | 883 | $computerdb->{$ip}{'switch_port_id'} = 0 if $computerdb->{$ip}{'switch_port_id'} !~ m/^\d+$/; # force numeric |
---|
[270] | 884 | } |
---|
| 885 | delete $computerdb->{$ip}{'switch_port'} if exists $computerdb->{$ip}{'switch_port'}; |
---|
| 886 | |
---|
[261] | 887 | next LOOP_ON_IP_ADDRESS if exists $computerdb->{$ip}{'switch_port_hr'} and defined $computerdb->{$ip}{'switch_port_hr'}; |
---|
[198] | 888 | |
---|
[270] | 889 | $computerdb->{$ip}{'switch_port_hr'} = $computerdb->{$ip}{'switch_port_id'}; |
---|
[151] | 890 | } |
---|
| 891 | |
---|
[150] | 892 | return $computerdb; |
---|
| 893 | } |
---|
| 894 | |
---|
[296] | 895 | #--------------------------------------------------------------- |
---|
| 896 | sub get_switchdb_checksum { |
---|
| 897 | my %switch_db = @_; # same as global %SWITCH_DB |
---|
| 898 | |
---|
| 899 | my $checksum_data = ''; |
---|
| 900 | for my $sw_name (sort keys %switch_db) { # sort to always have the same order |
---|
| 901 | $checksum_data .= join ':', |
---|
| 902 | $switch_db{$sw_name}->{'description'}, |
---|
[309] | 903 | $switch_db{$sw_name}->{'model'}, |
---|
[296] | 904 | $switch_db{$sw_name}->{'hostname'}, |
---|
| 905 | "\n"; |
---|
| 906 | } |
---|
| 907 | |
---|
| 908 | return sha512_base64($checksum_data); |
---|
| 909 | } |
---|
| 910 | |
---|
[300] | 911 | #--------------------------------------------------------------- |
---|
| 912 | sub update_switchdb { |
---|
| 913 | my %args = ( |
---|
| 914 | verbose => 0, |
---|
| 915 | @_); |
---|
| 916 | |
---|
| 917 | init_switch_names('yes'); #nomme les switchs |
---|
| 918 | print "\n"; |
---|
| 919 | |
---|
| 920 | my %where = (); |
---|
| 921 | my %db_switch_output_port = (); |
---|
| 922 | my %db_switch_ip_hostnamefq = (); |
---|
| 923 | |
---|
| 924 | DETECT_ALL_ROUTER: |
---|
| 925 | for my $one_router ( get_list_main_router(get_list_network()) ) { |
---|
| 926 | print "Info: router loop $one_router\n" if $args{'verbose'}; |
---|
| 927 | my %resol_arp = resolve_ip_arp_host($one_router, q{*}, q{low}); # resolution arp |
---|
| 928 | |
---|
| 929 | next DETECT_ALL_ROUTER if $resol_arp{'mac_address'} eq 'unknow'; |
---|
| 930 | print "VERBOSE_1: Router detected $resol_arp{'ipv4_address'} - $resol_arp{'mac_address'}\n" if $args{'verbose'}; |
---|
| 931 | |
---|
| 932 | my $vlan_name = get_current_vlan_name_for_interface($resol_arp{'interface'}); |
---|
| 933 | my $vlan_id = get_current_vlan_id($vlan_name); |
---|
| 934 | $where{$resol_arp{'ipv4_address'}} = find_all_switch_port($resol_arp{'mac_address'}, $vlan_id); # retrouve les emplacements des routeurs |
---|
| 935 | } |
---|
| 936 | |
---|
| 937 | ALL_ROUTER_IP_ADDRESS: |
---|
| 938 | for my $ip_router (Net::Netmask::sort_by_ip_address(keys %where)) { # '194.254.66.254')) { |
---|
| 939 | |
---|
| 940 | next ALL_ROUTER_IP_ADDRESS if not exists $where{$ip_router}; # /a priori/ idiot car ne sers à rien... |
---|
| 941 | |
---|
| 942 | ALL_SWITCH_CONNECTED: |
---|
| 943 | for my $switch_detected ( keys %{$where{$ip_router}} ) { |
---|
| 944 | |
---|
| 945 | my $switch = $where{$ip_router}->{$switch_detected}; |
---|
| 946 | |
---|
| 947 | next ALL_SWITCH_CONNECTED if $switch->{'port_id'} eq '0'; |
---|
| 948 | |
---|
| 949 | $db_switch_output_port{$switch->{'hostname'}} = $switch->{'port_hr'}; |
---|
| 950 | print "VERBOSE_2: output port $switch->{'hostname'} : $switch->{'port_hr'}\n" if $args{'verbose'}; |
---|
| 951 | } |
---|
| 952 | } |
---|
| 953 | |
---|
| 954 | my %db_switch_link_with = (); |
---|
| 955 | |
---|
| 956 | my @list_all_switch = (); |
---|
| 957 | my @list_switch_ipv4 = (); |
---|
| 958 | for my $sw (@SWITCH_LIST) { |
---|
| 959 | push @list_all_switch, $sw->{'hostname'}; |
---|
| 960 | } |
---|
| 961 | |
---|
| 962 | my $timestamp = time; |
---|
| 963 | |
---|
| 964 | ALL_SWITCH: |
---|
| 965 | for my $one_switch (@list_all_switch) { |
---|
| 966 | my %resol_arp = resolve_ip_arp_host($one_switch, q{*}, q{low}); # arp resolution |
---|
| 967 | if (exists $SWITCH_DB{$one_switch}{'fake-ip'}) { |
---|
| 968 | my $fake_ip = $SWITCH_DB{$one_switch}{'fake-ip'}; |
---|
| 969 | fast_ping($fake_ip); |
---|
| 970 | print "WARNING: fake ip on switch $one_switch -> $fake_ip / $resol_arp{'ipv4_address'}\n" if $args{'verbose'}; |
---|
| 971 | my %resol_arp_alt = resolve_ip_arp_host($fake_ip, q{*}, q{low}); # arp resolution |
---|
| 972 | if ($resol_arp_alt{'mac_address'} ne 'unknow') { |
---|
| 973 | $resol_arp{'mac_address'} = $resol_arp_alt{'mac_address'}; |
---|
| 974 | $resol_arp{'interface'} = $resol_arp_alt{'interface'}; |
---|
| 975 | $resol_arp{'ipv4_address'} .= '*'; |
---|
| 976 | # Force a MAC trace on switch |
---|
| 977 | system "arping -c 1 -w 1 -rR -i $resol_arp_alt{'interface'} $fake_ip > /dev/null 2>&1"; |
---|
| 978 | } |
---|
| 979 | } |
---|
| 980 | print "Info: switch loop $one_switch\n" if $args{'verbose'}; |
---|
| 981 | next ALL_SWITCH if $resol_arp{'mac_address'} eq 'unknow'; |
---|
| 982 | |
---|
| 983 | push @list_switch_ipv4, $resol_arp{'ipv4_address'}; |
---|
| 984 | |
---|
| 985 | my $vlan_name = get_current_vlan_name_for_interface($resol_arp{'interface'}); |
---|
| 986 | my $vlan_id = get_current_vlan_id($vlan_name); |
---|
| 987 | $where{$resol_arp{'ipv4_address'}} = find_all_switch_port($resol_arp{'mac_address'}, $vlan_id); # find port on all switch |
---|
| 988 | |
---|
| 989 | if ($args{'verbose'}) { |
---|
| 990 | print "VERBOSE_3: $one_switch $resol_arp{'ipv4_address'} $resol_arp{'mac_address'}\n"; |
---|
| 991 | print "VERBOSE_3: $one_switch --- ", |
---|
| 992 | join(' + ', keys %{$where{$resol_arp{'ipv4_address'}}}), |
---|
| 993 | "\n"; |
---|
| 994 | } |
---|
| 995 | |
---|
| 996 | $db_switch_ip_hostnamefq{$resol_arp{'ipv4_address'}} = $resol_arp{'hostname_fq'}; |
---|
| 997 | print "VERBOSE_4: db_switch_ip_hostnamefq $resol_arp{'ipv4_address'} -> $resol_arp{'hostname_fq'}\n" if $args{'verbose'}; |
---|
| 998 | |
---|
| 999 | $SWITCH_DB{$one_switch}->{'ipv4_address'} = $resol_arp{'ipv4_address'}; |
---|
| 1000 | $SWITCH_DB{$one_switch}->{'mac_address'} = $resol_arp{'mac_address'}; |
---|
| 1001 | $SWITCH_DB{$one_switch}->{'timestamp'} = $timestamp; |
---|
| 1002 | $SWITCH_DB{$one_switch}->{'network'} = $vlan_name; |
---|
| 1003 | } |
---|
| 1004 | |
---|
| 1005 | ALL_SWITCH_IP_ADDRESS: |
---|
| 1006 | for my $ip (@list_switch_ipv4) { |
---|
| 1007 | # for my $ip (Net::Netmask::sort_by_ip_address(@list_switch_ipv4)) { |
---|
| 1008 | |
---|
| 1009 | print "VERBOSE_5: loop on $db_switch_ip_hostnamefq{$ip}\n" if $args{'verbose'}; |
---|
| 1010 | |
---|
| 1011 | next ALL_SWITCH_IP_ADDRESS if not exists $where{$ip}; |
---|
| 1012 | # next ALL_SWITCH_IP_ADDRESS if not exists $SWITCH_PORT_COUNT{ $db_switch_ip_hostnamefq{$ip} }; |
---|
| 1013 | |
---|
| 1014 | DETECTED_SWITCH: |
---|
| 1015 | for my $switch_detected ( keys %{$where{$ip}} ) { |
---|
| 1016 | |
---|
| 1017 | my $switch = $where{$ip}->{$switch_detected}; |
---|
| 1018 | print "VERBOSE_6: $db_switch_ip_hostnamefq{$ip} -> $switch->{'hostname'} : $switch->{'port_hr'}\n" if $args{'verbose'}; |
---|
| 1019 | |
---|
| 1020 | next if $switch->{'port_id'} eq '0'; |
---|
| 1021 | next if $switch->{'port_hr'} eq $db_switch_output_port{$switch->{'hostname'}}; |
---|
| 1022 | next if $switch->{'hostname'} eq $db_switch_ip_hostnamefq{$ip}; # $computerdb->{$ip}{'hostname'}; |
---|
| 1023 | |
---|
| 1024 | $db_switch_link_with{ $db_switch_ip_hostnamefq{$ip} } ||= {}; |
---|
| 1025 | $db_switch_link_with{ $db_switch_ip_hostnamefq{$ip} }->{ $switch->{'hostname'} } = $switch->{'port_hr'}; |
---|
| 1026 | print "VERBOSE_7: +++++\n" if $args{'verbose'}; |
---|
| 1027 | } |
---|
| 1028 | |
---|
| 1029 | } |
---|
| 1030 | |
---|
| 1031 | my %db_switch_connected_on_port = (); |
---|
| 1032 | my $maybe_more_than_one_switch_connected = 'yes'; |
---|
| 1033 | my $cloop = 0; |
---|
| 1034 | |
---|
| 1035 | while ($maybe_more_than_one_switch_connected eq 'yes' and $cloop < 100) { |
---|
| 1036 | $cloop++; |
---|
| 1037 | print "VERBOSE_9: cloop reduction step: $cloop\n" if $args{'verbose'}; |
---|
| 1038 | for my $sw (keys %db_switch_link_with) { |
---|
| 1039 | for my $connect (keys %{$db_switch_link_with{$sw}}) { |
---|
| 1040 | |
---|
| 1041 | my $port_hr = $db_switch_link_with{$sw}->{$connect}; |
---|
| 1042 | |
---|
| 1043 | $db_switch_connected_on_port{"$connect$SEP_SWITCH_PORT$port_hr"} ||= {}; |
---|
| 1044 | $db_switch_connected_on_port{"$connect$SEP_SWITCH_PORT$port_hr"}->{$sw}++; # Just to define the key |
---|
| 1045 | } |
---|
| 1046 | } |
---|
| 1047 | |
---|
| 1048 | $maybe_more_than_one_switch_connected = 'no'; |
---|
| 1049 | |
---|
| 1050 | SWITCH_AND_PORT: |
---|
| 1051 | for my $swport (keys %db_switch_connected_on_port) { |
---|
| 1052 | |
---|
| 1053 | next if keys %{$db_switch_connected_on_port{$swport}} == 1; |
---|
| 1054 | |
---|
| 1055 | $maybe_more_than_one_switch_connected = 'yes'; |
---|
| 1056 | |
---|
| 1057 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
| 1058 | my @sw_on_same_port = keys %{$db_switch_connected_on_port{$swport}}; |
---|
| 1059 | print "VERBOSE_10: $swport -- ".$#sw_on_same_port." -- @sw_on_same_port\n" if $args{'verbose'}; |
---|
| 1060 | |
---|
| 1061 | CONNECTED: |
---|
| 1062 | for my $sw_connected (@sw_on_same_port) { |
---|
| 1063 | |
---|
| 1064 | next CONNECTED if not keys %{$db_switch_link_with{$sw_connected}} == 1; |
---|
| 1065 | |
---|
| 1066 | $db_switch_connected_on_port{$swport} = {$sw_connected => 1}; |
---|
| 1067 | |
---|
| 1068 | for my $other_sw (@sw_on_same_port) { |
---|
| 1069 | next if $other_sw eq $sw_connected; |
---|
| 1070 | |
---|
| 1071 | delete $db_switch_link_with{$other_sw}->{$sw_connect}; |
---|
| 1072 | } |
---|
| 1073 | |
---|
| 1074 | # We can not do better for this switch for this loop |
---|
| 1075 | next SWITCH_AND_PORT; |
---|
| 1076 | } |
---|
| 1077 | } |
---|
| 1078 | } |
---|
| 1079 | |
---|
| 1080 | my %db_switch_parent =(); |
---|
| 1081 | |
---|
| 1082 | for my $sw (keys %db_switch_link_with) { |
---|
| 1083 | for my $connect (keys %{$db_switch_link_with{$sw}}) { |
---|
| 1084 | |
---|
| 1085 | my $port_hr = $db_switch_link_with{$sw}->{$connect}; |
---|
| 1086 | |
---|
| 1087 | $db_switch_connected_on_port{"$connect$SEP_SWITCH_PORT$port_hr"} ||= {}; |
---|
| 1088 | $db_switch_connected_on_port{"$connect$SEP_SWITCH_PORT$port_hr"}->{$sw} = $port_hr; |
---|
| 1089 | |
---|
| 1090 | $db_switch_parent{$sw} = {switch => $connect, port_hr => $port_hr}; |
---|
| 1091 | } |
---|
| 1092 | } |
---|
| 1093 | |
---|
| 1094 | print "Switch output port and parent port connection\n"; |
---|
| 1095 | print "---------------------------------------------\n"; |
---|
| 1096 | for my $sw (sort keys %db_switch_output_port) { |
---|
| 1097 | if (exists $db_switch_parent{$sw}) { |
---|
| 1098 | printf "%-28s %2s +--> %2s %-25s\n", $sw, $db_switch_output_port{$sw}, $db_switch_parent{$sw}->{'port_hr'}, $db_switch_parent{$sw}->{'switch'}; |
---|
| 1099 | } |
---|
| 1100 | else { |
---|
| 1101 | printf "%-28s %2s +--> router\n", $sw, $db_switch_output_port{$sw}; |
---|
| 1102 | } |
---|
| 1103 | } |
---|
| 1104 | print "\n"; |
---|
| 1105 | |
---|
| 1106 | print "Switch parent and children port inter-connection\n"; |
---|
| 1107 | print "------------------------------------------------\n"; |
---|
| 1108 | for my $swport (sort keys %db_switch_connected_on_port) { |
---|
| 1109 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
| 1110 | for my $sw (keys %{$db_switch_connected_on_port{$swport}}) { |
---|
| 1111 | if (exists $db_switch_output_port{$sw}) { |
---|
| 1112 | printf "%-28s %2s <--+ %2s %-25s\n", $sw_connect, $port_connect, $db_switch_output_port{$sw}, $sw; |
---|
| 1113 | } |
---|
| 1114 | else { |
---|
| 1115 | printf "%-28s %2s <--+ %-25s\n", $sw_connect, $port_connect, $sw; |
---|
| 1116 | } |
---|
| 1117 | } |
---|
| 1118 | } |
---|
| 1119 | |
---|
| 1120 | my $switch_connection = { |
---|
| 1121 | output_port => \%db_switch_output_port, |
---|
| 1122 | parent => \%db_switch_parent, |
---|
| 1123 | connected_on_port => \%db_switch_connected_on_port, |
---|
| 1124 | link_with => \%db_switch_link_with, |
---|
| 1125 | switch_db => \%SWITCH_DB, |
---|
| 1126 | timestamp => $timestamp, |
---|
| 1127 | checksum => get_switchdb_checksum(%SWITCH_DB), |
---|
| 1128 | }; |
---|
| 1129 | |
---|
| 1130 | YAML::Syck::DumpFile("$KLASK_SW_FILE", $switch_connection); |
---|
| 1131 | return; |
---|
| 1132 | } |
---|
| 1133 | |
---|
[218] | 1134 | ################################################################ |
---|
| 1135 | # command |
---|
| 1136 | ################################################################ |
---|
[2] | 1137 | |
---|
[218] | 1138 | #--------------------------------------------------------------- |
---|
[2] | 1139 | sub cmd_help { |
---|
| 1140 | |
---|
[63] | 1141 | print <<'END'; |
---|
[224] | 1142 | klask - port and search manager for switches, map management |
---|
[2] | 1143 | |
---|
[129] | 1144 | klask version |
---|
[224] | 1145 | klask help |
---|
[129] | 1146 | |
---|
[301] | 1147 | klask updatedb [--verbose|-v] [--verb-description|-d] [--chk-hostname|-h] [--chk-location|-l] [--no-rebuildsw|-R] |
---|
[226] | 1148 | klask exportdb [--format|-f txt|html] |
---|
[223] | 1149 | klask removedb IP* computer* |
---|
| 1150 | klask cleandb [--verbose|-v] --day number_of_day --repair-dns |
---|
[2] | 1151 | |
---|
[224] | 1152 | klask updatesw [--verbose|-v] |
---|
[307] | 1153 | klask exportsw [--format|-f txt|dot] [--modulo|-m XX] [--shift|-s YY] |
---|
[45] | 1154 | |
---|
[226] | 1155 | klask searchdb [--kind|-k host|mac] computer [mac-address] |
---|
[2] | 1156 | klask search computer |
---|
[226] | 1157 | klask search-mac-on-switch [--verbose|-v] [--vlan|-i vlan-id] switch mac_addr |
---|
[2] | 1158 | |
---|
[226] | 1159 | klask ip-free [--verbose|-v] [--day|-d days-to-death] [--format|-f txt|html] [vlan_name] |
---|
[69] | 1160 | |
---|
[330] | 1161 | klask bad-vlan-id [--day|-d days_before_alert] [--format|-f txt|html] |
---|
[129] | 1162 | |
---|
[223] | 1163 | klask enable [--verbose|-v] switch port |
---|
| 1164 | klask disable [--verbose|-v] switch port |
---|
| 1165 | klask status [--verbose|-v] switch port |
---|
[237] | 1166 | |
---|
[247] | 1167 | klask poe-enable [--verbose|-v] switch port |
---|
| 1168 | klask poe-disable [--verbose|-v] switch port |
---|
| 1169 | klask poe-status [--verbose|-v] switch port |
---|
| 1170 | |
---|
[238] | 1171 | klask vlan-getname switch vlan-id |
---|
| 1172 | klask vlan-list switch |
---|
[2] | 1173 | END |
---|
[63] | 1174 | return; |
---|
[2] | 1175 | } |
---|
| 1176 | |
---|
[218] | 1177 | #--------------------------------------------------------------- |
---|
[36] | 1178 | sub cmd_version { |
---|
| 1179 | |
---|
[63] | 1180 | print <<'END'; |
---|
[224] | 1181 | klask - port and search manager for switches, map management |
---|
[259] | 1182 | Copyright (C) 2005-2017 Gabriel Moreau <Gabriel.Moreau(A)univ-grenoble-alpes.fr> |
---|
[36] | 1183 | |
---|
| 1184 | END |
---|
[37] | 1185 | print ' $Id: klask 330 2017-10-31 15:05:26Z g7moreau $'."\n"; |
---|
[63] | 1186 | return; |
---|
[36] | 1187 | } |
---|
| 1188 | |
---|
[238] | 1189 | #--------------------------------------------------------------- |
---|
[2] | 1190 | sub cmd_search { |
---|
| 1191 | my @computer = @_; |
---|
[63] | 1192 | |
---|
[4] | 1193 | init_switch_names(); #nomme les switchs |
---|
[111] | 1194 | fast_ping(@computer); |
---|
[133] | 1195 | |
---|
| 1196 | LOOP_ON_COMPUTER: |
---|
[2] | 1197 | for my $clientname (@computer) { |
---|
| 1198 | my %resol_arp = resolve_ip_arp_host($clientname); #resolution arp |
---|
[261] | 1199 | my $vlan_name = get_current_vlan_name_for_interface($resol_arp{'interface'}); |
---|
[144] | 1200 | my $vlan_id = get_current_vlan_id($vlan_name); |
---|
[261] | 1201 | my %where = find_switch_port($resol_arp{'mac_address'}, '', $vlan_id); #retrouve l'emplacement |
---|
[133] | 1202 | |
---|
[261] | 1203 | next LOOP_ON_COMPUTER if $where{'switch_description'} eq 'unknow' or $resol_arp{'hostname_fq'} eq 'unknow' or $resol_arp{'mac_address'} eq 'unknow'; |
---|
[133] | 1204 | |
---|
[146] | 1205 | printf '%-22s %2s %-30s %-15s %18s', |
---|
[261] | 1206 | $where{'switch_hostname'}, |
---|
| 1207 | $where{'switch_port_hr'}, |
---|
| 1208 | $resol_arp{'hostname_fq'}, |
---|
| 1209 | $resol_arp{'ipv4_address'}, |
---|
| 1210 | $resol_arp{'mac_address'}."\n"; |
---|
[2] | 1211 | } |
---|
[63] | 1212 | return; |
---|
[2] | 1213 | } |
---|
| 1214 | |
---|
[218] | 1215 | #--------------------------------------------------------------- |
---|
[2] | 1216 | sub cmd_searchdb { |
---|
[136] | 1217 | my @ARGV = @_; |
---|
| 1218 | |
---|
| 1219 | my $kind; |
---|
| 1220 | |
---|
[138] | 1221 | GetOptions( |
---|
[137] | 1222 | 'kind=s' => \$kind, |
---|
[136] | 1223 | ); |
---|
| 1224 | |
---|
| 1225 | my %possible_search = ( |
---|
| 1226 | host => \&cmd_searchdb_host, |
---|
| 1227 | mac => \&cmd_searchdb_mac, |
---|
| 1228 | ); |
---|
| 1229 | |
---|
[137] | 1230 | $kind = 'host' if not defined $possible_search{$kind}; |
---|
[136] | 1231 | |
---|
| 1232 | $possible_search{$kind}->(@ARGV); |
---|
| 1233 | return; |
---|
| 1234 | } |
---|
| 1235 | |
---|
| 1236 | |
---|
[218] | 1237 | #--------------------------------------------------------------- |
---|
[136] | 1238 | sub cmd_searchdb_host { |
---|
[2] | 1239 | my @computer = @_; |
---|
| 1240 | |
---|
[111] | 1241 | fast_ping(@computer); |
---|
[151] | 1242 | my $computerdb = computerdb_load(); |
---|
[63] | 1243 | |
---|
[2] | 1244 | LOOP_ON_COMPUTER: |
---|
| 1245 | for my $clientname (@computer) { |
---|
| 1246 | my %resol_arp = resolve_ip_arp_host($clientname); #resolution arp |
---|
[261] | 1247 | my $ip = $resol_arp{'ipv4_address'}; |
---|
[63] | 1248 | |
---|
[2] | 1249 | next LOOP_ON_COMPUTER unless exists $computerdb->{$ip}; |
---|
[63] | 1250 | |
---|
[261] | 1251 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $computerdb->{$ip}{'timestamp'}; |
---|
[2] | 1252 | $year += 1900; |
---|
| 1253 | $mon++; |
---|
[63] | 1254 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[2] | 1255 | |
---|
| 1256 | printf "%-22s %2s %-30s %-15s %-18s %s\n", |
---|
[261] | 1257 | $computerdb->{$ip}{'switch_hostname'}, |
---|
| 1258 | $computerdb->{$ip}{'switch_port_hr'}, |
---|
| 1259 | $computerdb->{$ip}{'hostname_fq'}, |
---|
[2] | 1260 | $ip, |
---|
[261] | 1261 | $computerdb->{$ip}{'mac_address'}, |
---|
[2] | 1262 | $date; |
---|
| 1263 | } |
---|
[63] | 1264 | return; |
---|
[2] | 1265 | } |
---|
| 1266 | |
---|
[218] | 1267 | #--------------------------------------------------------------- |
---|
[136] | 1268 | sub cmd_searchdb_mac { |
---|
| 1269 | my @mac = map { normalize_mac_address($_) } @_; |
---|
| 1270 | |
---|
[151] | 1271 | my $computerdb = computerdb_load(); |
---|
[136] | 1272 | |
---|
| 1273 | LOOP_ON_MAC: |
---|
| 1274 | for my $mac (@mac) { |
---|
| 1275 | LOOP_ON_COMPUTER: |
---|
| 1276 | for my $ip (keys %{$computerdb}) { |
---|
[261] | 1277 | next LOOP_ON_COMPUTER if $mac ne $computerdb->{$ip}{'mac_address'}; |
---|
[198] | 1278 | |
---|
[261] | 1279 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $computerdb->{$ip}{'timestamp'}; |
---|
[136] | 1280 | $year += 1900; |
---|
| 1281 | $mon++; |
---|
| 1282 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
| 1283 | |
---|
| 1284 | printf "%-22s %2s %-30s %-15s %-18s %s\n", |
---|
[261] | 1285 | $computerdb->{$ip}{'switch_hostname'}, |
---|
| 1286 | $computerdb->{$ip}{'switch_port_hr'}, |
---|
| 1287 | $computerdb->{$ip}{'hostname_fq'}, |
---|
[136] | 1288 | $ip, |
---|
[261] | 1289 | $computerdb->{$ip}{'mac_address'}, |
---|
[136] | 1290 | $date; |
---|
[138] | 1291 | #next LOOP_ON_MAC; |
---|
[136] | 1292 | } |
---|
| 1293 | |
---|
| 1294 | } |
---|
| 1295 | return; |
---|
| 1296 | } |
---|
| 1297 | |
---|
[218] | 1298 | #--------------------------------------------------------------- |
---|
[2] | 1299 | sub cmd_updatedb { |
---|
[170] | 1300 | @ARGV = @_; |
---|
| 1301 | |
---|
[301] | 1302 | my ($verbose, $verb_description, $check_hostname, $check_location, $no_rebuildsw); |
---|
[170] | 1303 | |
---|
| 1304 | GetOptions( |
---|
[172] | 1305 | 'verbose|v' => \$verbose, |
---|
| 1306 | 'verb-description|d' => \$verb_description, |
---|
| 1307 | 'chk-hostname|h' => \$check_hostname, |
---|
[173] | 1308 | 'chk-location|l' => \$check_location, |
---|
[303] | 1309 | 'no-rebuildsw|R' => \$no_rebuildsw, |
---|
[170] | 1310 | ); |
---|
| 1311 | |
---|
| 1312 | my @network = @ARGV; |
---|
[2] | 1313 | @network = get_list_network() if not @network; |
---|
| 1314 | |
---|
[34] | 1315 | test_switchdb_environnement(); |
---|
| 1316 | |
---|
| 1317 | my $computerdb = {}; |
---|
[151] | 1318 | $computerdb = computerdb_load() if -e "$KLASK_DB_FILE"; |
---|
[2] | 1319 | my $timestamp = time; |
---|
[22] | 1320 | |
---|
[2] | 1321 | my %computer_not_detected = (); |
---|
| 1322 | my $timestamp_last_week = $timestamp - (3600 * 24 * 7); |
---|
| 1323 | |
---|
| 1324 | my $number_of_computer = get_list_ip(@network); # + 1; |
---|
[63] | 1325 | my $size_of_database = keys %{$computerdb}; |
---|
[31] | 1326 | $size_of_database = 1 if $size_of_database == 0; |
---|
[2] | 1327 | my $i = 0; |
---|
| 1328 | my $detected_computer = 0; |
---|
[22] | 1329 | |
---|
[173] | 1330 | init_switch_names('yes', $verb_description, $check_hostname, $check_location); #nomme les switchs |
---|
[2] | 1331 | |
---|
[296] | 1332 | { |
---|
| 1333 | my $switch_checksum = get_switchdb_checksum(%SWITCH_DB); |
---|
| 1334 | # Remplis le champs portignore des ports d'inter-connection pour chaque switch |
---|
[44] | 1335 | my $switch_connection = YAML::Syck::LoadFile("$KLASK_SW_FILE"); |
---|
[297] | 1336 | if ($switch_checksum ne $switch_connection->{'checksum'}) { # Verify checksum |
---|
[301] | 1337 | if ($no_rebuildsw) { |
---|
| 1338 | print "WARNING: switch database is outdate, please rebuild if with updatesw command\n"; |
---|
[302] | 1339 | } |
---|
[301] | 1340 | else { |
---|
| 1341 | print "WARNING: switch database is going to be rebuilt\n"; |
---|
| 1342 | update_switchdb(verbose => $verbose) |
---|
| 1343 | } |
---|
[296] | 1344 | } |
---|
| 1345 | |
---|
[261] | 1346 | my %db_switch_output_port = %{$switch_connection->{'output_port'}}; |
---|
| 1347 | my %db_switch_connected_on_port = %{$switch_connection->{'connected_on_port'}}; |
---|
[22] | 1348 | my %db_switch_chained_port = (); |
---|
[63] | 1349 | for my $swport (keys %db_switch_connected_on_port) { |
---|
[248] | 1350 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
[22] | 1351 | $db_switch_chained_port{$sw_connect} .= "$port_connect:"; |
---|
| 1352 | } |
---|
[209] | 1353 | for my $sw (@SWITCH_LIST) { |
---|
[310] | 1354 | push @{$sw->{'portignore'}}, $db_switch_output_port{$sw->{'hostname'}} if exists $db_switch_output_port{$sw->{'hostname'}}; |
---|
[261] | 1355 | if ( exists $db_switch_chained_port{$sw->{'hostname'}} ) { |
---|
| 1356 | chop $db_switch_chained_port{$sw->{'hostname'}}; |
---|
[310] | 1357 | push @{$sw->{'portignore'}}, split m/ : /xms, $db_switch_chained_port{$sw->{'hostname'}}; |
---|
[22] | 1358 | } |
---|
[310] | 1359 | # print "$sw->{'hostname'} ++ @{$sw->{'portignore'}}\n"; |
---|
[22] | 1360 | } |
---|
| 1361 | } |
---|
| 1362 | |
---|
[2] | 1363 | my %router_mac_ip = (); |
---|
| 1364 | DETECT_ALL_ROUTER: |
---|
[9] | 1365 | # for my $one_router ('194.254.66.254') { |
---|
| 1366 | for my $one_router ( get_list_main_router(@network) ) { |
---|
[2] | 1367 | my %resol_arp = resolve_ip_arp_host($one_router); |
---|
[261] | 1368 | $router_mac_ip{ $resol_arp{'mac_address'} } = $resol_arp{'ipv4_address'}; |
---|
[2] | 1369 | } |
---|
| 1370 | |
---|
| 1371 | ALL_NETWORK: |
---|
[179] | 1372 | for my $current_net (@network) { |
---|
[2] | 1373 | |
---|
[179] | 1374 | my @computer = get_list_ip($current_net); |
---|
| 1375 | my $current_interface = get_current_interface($current_net); |
---|
[2] | 1376 | |
---|
[179] | 1377 | fast_ping(@computer) if get_current_scan_mode($current_net) eq 'active'; |
---|
[2] | 1378 | |
---|
| 1379 | LOOP_ON_COMPUTER: |
---|
| 1380 | for my $one_computer (@computer) { |
---|
| 1381 | $i++; |
---|
[49] | 1382 | |
---|
[63] | 1383 | my $total_percent = int (($i*100)/$number_of_computer); |
---|
| 1384 | |
---|
[2] | 1385 | my $localtime = time - $timestamp; |
---|
[63] | 1386 | my ($sec,$min) = localtime $localtime; |
---|
[2] | 1387 | |
---|
| 1388 | my $time_elapse = 0; |
---|
| 1389 | $time_elapse = $localtime * ( 100 - $total_percent) / $total_percent if $total_percent != 0; |
---|
[63] | 1390 | my ($sec_elapse,$min_elapse) = localtime $time_elapse; |
---|
[2] | 1391 | |
---|
| 1392 | printf "\rComputer scanned: %4i/%i (%2i%%)", $i, $number_of_computer, $total_percent; |
---|
[63] | 1393 | printf ', detected: %4i/%i (%2i%%)', $detected_computer, $size_of_database, int(($detected_computer*100)/$size_of_database); |
---|
| 1394 | printf ' [Time: %02i:%02i / %02i:%02i]', int($localtime/60), $localtime % 60, int($time_elapse/60), $time_elapse % 60; |
---|
[96] | 1395 | printf ' %-8s %-14s', $current_interface, $one_computer; |
---|
[2] | 1396 | |
---|
[186] | 1397 | my $already_exist = exists $computerdb->{$one_computer} ? 'yes' : 'no'; |
---|
| 1398 | my %resol_arp = resolve_ip_arp_host($one_computer, $current_interface, 'fast', $already_exist); |
---|
[63] | 1399 | |
---|
[9] | 1400 | # do not search on router connection (why ?) |
---|
[261] | 1401 | if ( exists $router_mac_ip{$resol_arp{'mac_address'}}) { |
---|
[179] | 1402 | $computer_not_detected{$one_computer} = $current_net; |
---|
[2] | 1403 | next LOOP_ON_COMPUTER; |
---|
| 1404 | } |
---|
| 1405 | |
---|
[9] | 1406 | # do not search on switch inter-connection |
---|
[261] | 1407 | if (exists $SWITCH_LEVEL{$resol_arp{'hostname_fq'}}) { |
---|
[179] | 1408 | $computer_not_detected{$one_computer} = $current_net; |
---|
[2] | 1409 | next LOOP_ON_COMPUTER; |
---|
| 1410 | } |
---|
| 1411 | |
---|
[63] | 1412 | my $switch_proposal = q{}; |
---|
[261] | 1413 | if (exists $computerdb->{$resol_arp{'ipv4_address'}} and exists $computerdb->{$resol_arp{'ipv4_address'}}{'switch_hostname'}) { |
---|
| 1414 | $switch_proposal = $computerdb->{$resol_arp{'ipv4_address'}}{'switch_hostname'}; |
---|
[2] | 1415 | } |
---|
| 1416 | |
---|
[3] | 1417 | # do not have a mac address |
---|
[261] | 1418 | if ($resol_arp{'mac_address'} eq 'unknow' or (exists $resol_arp{'timestamps'} and $resol_arp{'timestamps'} < ($timestamp - 3 * 3600))) { |
---|
[179] | 1419 | $computer_not_detected{$one_computer} = $current_net; |
---|
[3] | 1420 | next LOOP_ON_COMPUTER; |
---|
| 1421 | } |
---|
| 1422 | |
---|
[261] | 1423 | my $vlan_name = get_current_vlan_name_for_interface($resol_arp{'interface'}); |
---|
[147] | 1424 | my $vlan_id = get_current_vlan_id($vlan_name); |
---|
[262] | 1425 | my %where = find_switch_port($resol_arp{'mac_address'}, $switch_proposal, $vlan_id); |
---|
[2] | 1426 | |
---|
| 1427 | #192.168.24.156: |
---|
| 1428 | # arp: 00:0B:DB:D5:F6:65 |
---|
| 1429 | # hostname: pcroyon.hmg.priv |
---|
| 1430 | # port: 5 |
---|
| 1431 | # switch: sw-batH-legi:hp2524 |
---|
| 1432 | # timestamp: 1164355525 |
---|
| 1433 | |
---|
| 1434 | # do not have a mac address |
---|
[261] | 1435 | # if ($resol_arp{'mac_address'} eq 'unknow') { |
---|
[3] | 1436 | # $computer_not_detected{$one_computer} = $current_interface; |
---|
| 1437 | # next LOOP_ON_COMPUTER; |
---|
| 1438 | # } |
---|
[2] | 1439 | |
---|
| 1440 | # detected on a switch |
---|
[261] | 1441 | if ($where{'switch_description'} ne 'unknow') { |
---|
[2] | 1442 | $detected_computer++; |
---|
[261] | 1443 | $computerdb->{$resol_arp{'ipv4_address'}} = { |
---|
| 1444 | hostname_fq => $resol_arp{'hostname_fq'}, |
---|
| 1445 | mac_address => $resol_arp{'mac_address'}, |
---|
| 1446 | switch_hostname => $where{'switch_hostname'}, |
---|
| 1447 | switch_description => $where{'switch_description'}, |
---|
[270] | 1448 | switch_port_id => $where{'switch_port_id'}, |
---|
[261] | 1449 | switch_port_hr => $where{'switch_port_hr'}, |
---|
[2] | 1450 | timestamp => $timestamp, |
---|
[179] | 1451 | network => $current_net, |
---|
[2] | 1452 | }; |
---|
| 1453 | next LOOP_ON_COMPUTER; |
---|
| 1454 | } |
---|
| 1455 | |
---|
| 1456 | # new in the database but where it is ? |
---|
[261] | 1457 | if (not exists $computerdb->{$resol_arp{'ipv4_address'}}) { |
---|
[2] | 1458 | $detected_computer++; |
---|
[261] | 1459 | $computerdb->{$resol_arp{'ipv4_address'}} = { |
---|
| 1460 | hostname_fq => $resol_arp{'hostname_fq'}, |
---|
| 1461 | mac_address => $resol_arp{'mac_address'}, |
---|
| 1462 | switch_hostname => $where{'switch_hostname'}, |
---|
| 1463 | switch_description => $where{'switch_description'}, |
---|
[270] | 1464 | switch_port_id => $where{'switch_port_id'}, |
---|
[261] | 1465 | switch_port_hr => $where{'switch_port_hr'}, |
---|
| 1466 | timestamp => $resol_arp{'timestamp'}, |
---|
[179] | 1467 | network => $current_net, |
---|
[2] | 1468 | }; |
---|
| 1469 | } |
---|
| 1470 | |
---|
| 1471 | # mise a jour du nom de la machine si modification dans le dns |
---|
[261] | 1472 | $computerdb->{$resol_arp{'ipv4_address'}}{'hostname_fq'} = $resol_arp{'hostname_fq'}; |
---|
[63] | 1473 | |
---|
[2] | 1474 | # mise à jour de la date de détection si détection plus récente par arpwatch |
---|
[261] | 1475 | $computerdb->{$resol_arp{'ipv4_address'}}{'timestamp'} = $resol_arp{'timestamp'} if exists $resol_arp{'timestamp'} and $computerdb->{$resol_arp{'ipv4_address'}}{'timestamp'} < $resol_arp{'timestamp'}; |
---|
[2] | 1476 | |
---|
| 1477 | # relance un arping sur la machine si celle-ci n'a pas été détectée depuis plus d'une semaine |
---|
[261] | 1478 | # push @computer_not_detected, $resol_arp{'ipv4_address'} if $computerdb->{$resol_arp{'ipv4_address'}}{'timestamp'} < $timestamp_last_week; |
---|
| 1479 | $computer_not_detected{$resol_arp{'ipv4_address'}} = $current_net if $computerdb->{$resol_arp{'ipv4_address'}}{'timestamp'} < $timestamp_last_week; |
---|
[63] | 1480 | |
---|
[2] | 1481 | } |
---|
| 1482 | } |
---|
| 1483 | |
---|
| 1484 | # final end of line at the end of the loop |
---|
| 1485 | printf "\n"; |
---|
| 1486 | |
---|
[13] | 1487 | my $dirdb = $KLASK_DB_FILE; |
---|
[63] | 1488 | $dirdb =~ s{ / [^/]* $}{}xms; |
---|
[2] | 1489 | mkdir "$dirdb", 0755 unless -d "$dirdb"; |
---|
[44] | 1490 | YAML::Syck::DumpFile("$KLASK_DB_FILE", $computerdb); |
---|
[2] | 1491 | |
---|
| 1492 | for my $one_computer (keys %computer_not_detected) { |
---|
[179] | 1493 | my $current_net = $computer_not_detected{$one_computer}; |
---|
| 1494 | my $current_interface = get_current_interface($current_net); |
---|
[258] | 1495 | system "arping -c 1 -w 1 -rR -i $current_interface $one_computer > /dev/null 2>&1" if get_current_scan_mode($current_net) eq 'active'; |
---|
[2] | 1496 | } |
---|
[63] | 1497 | return; |
---|
[2] | 1498 | } |
---|
| 1499 | |
---|
[218] | 1500 | #--------------------------------------------------------------- |
---|
[2] | 1501 | sub cmd_removedb { |
---|
| 1502 | my @computer = @_; |
---|
[34] | 1503 | |
---|
| 1504 | test_maindb_environnement(); |
---|
| 1505 | |
---|
[151] | 1506 | my $computerdb = computerdb_load(); |
---|
[2] | 1507 | |
---|
| 1508 | LOOP_ON_COMPUTER: |
---|
| 1509 | for my $one_computer (@computer) { |
---|
| 1510 | |
---|
[66] | 1511 | if ( $one_computer =~ m/^ $RE_IPv4_ADDRESS $/xms |
---|
| 1512 | and exists $computerdb->{$one_computer} ) { |
---|
| 1513 | delete $computerdb->{$one_computer}; |
---|
| 1514 | next; |
---|
| 1515 | } |
---|
| 1516 | |
---|
[2] | 1517 | my %resol_arp = resolve_ip_arp_host($one_computer); |
---|
| 1518 | |
---|
[261] | 1519 | delete $computerdb->{$resol_arp{'ipv4_address'}} if exists $computerdb->{$resol_arp{'ipv4_address'}}; |
---|
[2] | 1520 | } |
---|
| 1521 | |
---|
[13] | 1522 | my $dirdb = $KLASK_DB_FILE; |
---|
[63] | 1523 | $dirdb =~ s{ / [^/]* $}{}xms; |
---|
[2] | 1524 | mkdir "$dirdb", 0755 unless -d "$dirdb"; |
---|
[44] | 1525 | YAML::Syck::DumpFile("$KLASK_DB_FILE", $computerdb); |
---|
[63] | 1526 | return; |
---|
[2] | 1527 | } |
---|
| 1528 | |
---|
[218] | 1529 | #--------------------------------------------------------------- |
---|
[74] | 1530 | sub cmd_cleandb { |
---|
[110] | 1531 | my @ARGV = @_; |
---|
[74] | 1532 | |
---|
| 1533 | my $days_to_clean = 15; |
---|
[188] | 1534 | my $repairdns; |
---|
[74] | 1535 | my $verbose; |
---|
| 1536 | my $database_has_changed; |
---|
| 1537 | |
---|
[138] | 1538 | GetOptions( |
---|
[74] | 1539 | 'day|d=i' => \$days_to_clean, |
---|
| 1540 | 'verbose|v' => \$verbose, |
---|
[190] | 1541 | 'repair-dns|r' => \$repairdns, |
---|
[74] | 1542 | ); |
---|
| 1543 | |
---|
| 1544 | my @vlan_name = get_list_network(); |
---|
| 1545 | |
---|
[188] | 1546 | my $computerdb = computerdb_load(); |
---|
[74] | 1547 | my $timestamp = time; |
---|
| 1548 | |
---|
| 1549 | my $timestamp_barrier = 3600 * 24 * $days_to_clean; |
---|
[106] | 1550 | my $timestamp_3month = 3600 * 24 * 90; |
---|
[74] | 1551 | |
---|
[104] | 1552 | my %mactimedb = (); |
---|
[74] | 1553 | ALL_VLAN: |
---|
[109] | 1554 | for my $vlan (shuffle @vlan_name) { |
---|
[74] | 1555 | |
---|
[109] | 1556 | my @ip_list = shuffle get_list_ip($vlan); |
---|
[198] | 1557 | |
---|
[74] | 1558 | LOOP_ON_IP_ADDRESS: |
---|
| 1559 | for my $ip (@ip_list) { |
---|
| 1560 | |
---|
| 1561 | next LOOP_ON_IP_ADDRESS if |
---|
| 1562 | not exists $computerdb->{$ip}; |
---|
[198] | 1563 | |
---|
[261] | 1564 | #&& $computerdb->{$ip}{'timestamp'} > $timestamp_barrier; |
---|
| 1565 | my $ip_timestamp = $computerdb->{$ip}{'timestamp'}; |
---|
| 1566 | my $ip_mac = $computerdb->{$ip}{'mac_address'}; |
---|
| 1567 | my $ip_hostname_fq = $computerdb->{$ip}{'hostname_fq'}; |
---|
[104] | 1568 | |
---|
| 1569 | $mactimedb{$ip_mac} ||= { |
---|
| 1570 | ip => $ip, |
---|
| 1571 | timestamp => $ip_timestamp, |
---|
| 1572 | vlan => $vlan, |
---|
| 1573 | hostname_fq => $ip_hostname_fq, |
---|
| 1574 | }; |
---|
[198] | 1575 | |
---|
[108] | 1576 | if ( |
---|
[261] | 1577 | ( $mactimedb{$ip_mac}->{'timestamp'} - $ip_timestamp > $timestamp_barrier |
---|
[108] | 1578 | or ( |
---|
[261] | 1579 | $mactimedb{$ip_mac}->{'timestamp'} > $ip_timestamp |
---|
| 1580 | and $timestamp - $mactimedb{$ip_mac}->{'timestamp'} > $timestamp_3month |
---|
[108] | 1581 | ) |
---|
| 1582 | ) |
---|
[105] | 1583 | and ( |
---|
[261] | 1584 | not $mactimedb{$ip_mac}->{'hostname_fq'} =~ m/$RE_FLOAT_HOSTNAME/ |
---|
[118] | 1585 | or $ip_hostname_fq =~ m/$RE_FLOAT_HOSTNAME/ |
---|
[105] | 1586 | )) { |
---|
[74] | 1587 | print "remove ip $ip\n" if $verbose; |
---|
| 1588 | delete $computerdb->{$ip}; |
---|
| 1589 | $database_has_changed++; |
---|
| 1590 | } |
---|
| 1591 | |
---|
[108] | 1592 | elsif ( |
---|
[261] | 1593 | ( $ip_timestamp - $mactimedb{$ip_mac}->{'timestamp'} > $timestamp_barrier |
---|
[108] | 1594 | or ( |
---|
[261] | 1595 | $ip_timestamp > $mactimedb{$ip_mac}->{'timestamp'} |
---|
[108] | 1596 | and $timestamp - $ip_timestamp > $timestamp_3month |
---|
| 1597 | ) |
---|
| 1598 | ) |
---|
[105] | 1599 | and ( |
---|
[118] | 1600 | not $ip_hostname_fq =~ m/$RE_FLOAT_HOSTNAME/ |
---|
[261] | 1601 | or $mactimedb{$ip_mac}->{'hostname_fq'} =~ m/$RE_FLOAT_HOSTNAME/ |
---|
[105] | 1602 | )) { |
---|
[310] | 1603 | print "remove ip ".$mactimedb{$ip_mac}->{'ip'}."\n" if $verbose; |
---|
| 1604 | delete $computerdb->{$mactimedb{$ip_mac}->{'ip'}}; |
---|
[74] | 1605 | $database_has_changed++; |
---|
| 1606 | } |
---|
| 1607 | |
---|
[261] | 1608 | if ( $ip_timestamp > $mactimedb{$ip_mac}->{'timestamp'}) { |
---|
[104] | 1609 | $mactimedb{$ip_mac} = { |
---|
| 1610 | ip => $ip, |
---|
| 1611 | timestamp => $ip_timestamp, |
---|
| 1612 | vlan => $vlan, |
---|
| 1613 | hostname_fq => $ip_hostname_fq, |
---|
| 1614 | }; |
---|
[74] | 1615 | } |
---|
| 1616 | } |
---|
| 1617 | } |
---|
| 1618 | |
---|
[188] | 1619 | if ($repairdns) { # Search and update unkown computer in reverse DNS |
---|
[189] | 1620 | LOOP_ON_IP_ADDRESS: |
---|
| 1621 | for my $ip (keys %{$computerdb}) { |
---|
[261] | 1622 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} ne 'unknow'; |
---|
[188] | 1623 | |
---|
[189] | 1624 | my $packed_ip = scalar gethostbyname($ip); |
---|
| 1625 | next LOOP_ON_IP_ADDRESS if not defined $packed_ip; |
---|
[188] | 1626 | |
---|
| 1627 | my $hostname_fq = scalar gethostbyaddr($packed_ip, AF_INET); |
---|
[189] | 1628 | next LOOP_ON_IP_ADDRESS if not defined $hostname_fq; |
---|
[188] | 1629 | |
---|
[261] | 1630 | $computerdb->{$ip}{'hostname_fq'} = $hostname_fq; |
---|
[188] | 1631 | $database_has_changed++; |
---|
| 1632 | } |
---|
| 1633 | } |
---|
| 1634 | |
---|
[74] | 1635 | if ( $database_has_changed ) { |
---|
| 1636 | my $dirdb = $KLASK_DB_FILE; |
---|
| 1637 | $dirdb =~ s{ / [^/]* $}{}xms; |
---|
| 1638 | mkdir "$dirdb", 0755 unless -d "$dirdb"; |
---|
| 1639 | YAML::Syck::DumpFile("$KLASK_DB_FILE", $computerdb); |
---|
| 1640 | } |
---|
| 1641 | return; |
---|
| 1642 | } |
---|
| 1643 | |
---|
[218] | 1644 | #--------------------------------------------------------------- |
---|
[2] | 1645 | sub cmd_exportdb { |
---|
[113] | 1646 | @ARGV = @_; |
---|
[45] | 1647 | |
---|
| 1648 | my $format = 'txt'; |
---|
| 1649 | |
---|
[138] | 1650 | GetOptions( |
---|
[45] | 1651 | 'format|f=s' => \$format, |
---|
| 1652 | ); |
---|
| 1653 | |
---|
| 1654 | my %possible_format = ( |
---|
| 1655 | txt => \&cmd_exportdb_txt, |
---|
| 1656 | html => \&cmd_exportdb_html, |
---|
| 1657 | ); |
---|
| 1658 | |
---|
| 1659 | $format = 'txt' if not defined $possible_format{$format}; |
---|
[63] | 1660 | |
---|
[45] | 1661 | $possible_format{$format}->(@ARGV); |
---|
[63] | 1662 | return; |
---|
[45] | 1663 | } |
---|
| 1664 | |
---|
[218] | 1665 | #--------------------------------------------------------------- |
---|
[45] | 1666 | sub cmd_exportdb_txt { |
---|
[34] | 1667 | test_maindb_environnement(); |
---|
| 1668 | |
---|
[151] | 1669 | my $computerdb = computerdb_load(); |
---|
[2] | 1670 | |
---|
[320] | 1671 | my $tb_computer = Text::Table->new( |
---|
| 1672 | {align => 'left', align_title => 'left', title => 'Switch'}, |
---|
| 1673 | {align => 'right', align_title => 'right', title => 'Port'}, |
---|
| 1674 | {align => 'center', align_title => 'center', title => 'Link'}, |
---|
| 1675 | {align => 'left', align_title => 'left', title => 'Hostname-FQ'}, |
---|
| 1676 | {align => 'left', align_title => 'left', title => 'IPv4-Address'}, |
---|
| 1677 | {align => 'left', align_title => 'left', title => 'MAC-Address'}, |
---|
| 1678 | {align => 'left', align_title => 'left', title => 'Date'}, |
---|
| 1679 | {align => 'left', align_title => 'left', title => 'VLAN'}, |
---|
| 1680 | ); |
---|
[2] | 1681 | |
---|
| 1682 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 1683 | for my $ip (Net::Netmask::sort_by_ip_address(keys %{$computerdb})) { |
---|
[63] | 1684 | |
---|
[2] | 1685 | # to be improve in the future |
---|
[261] | 1686 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} eq ($computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}); # switch on himself ! |
---|
[2] | 1687 | |
---|
[261] | 1688 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $computerdb->{$ip}{'timestamp'}; |
---|
[2] | 1689 | $year += 1900; |
---|
| 1690 | $mon++; |
---|
[63] | 1691 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[2] | 1692 | |
---|
[177] | 1693 | my $vlan = ''; |
---|
[262] | 1694 | $vlan = $computerdb->{$ip}{'network'}.'('.get_current_vlan_id($computerdb->{$ip}{'network'}).')' if $computerdb->{$ip}{'network'}; |
---|
[177] | 1695 | |
---|
[320] | 1696 | my $arrow ='<---'; |
---|
| 1697 | $arrow ='<===' if $computerdb->{$ip}{'switch_port_hr'} =~ m/^(Trk|Br|Po)/; |
---|
[232] | 1698 | |
---|
[320] | 1699 | $tb_computer->add( |
---|
[261] | 1700 | $computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}, |
---|
| 1701 | $computerdb->{$ip}{'switch_port_hr'}, |
---|
[232] | 1702 | $arrow, |
---|
[261] | 1703 | $computerdb->{$ip}{'hostname_fq'}, |
---|
[2] | 1704 | $ip, |
---|
[261] | 1705 | $computerdb->{$ip}{'mac_address'}, |
---|
[70] | 1706 | $date, |
---|
[320] | 1707 | $vlan, |
---|
| 1708 | ); |
---|
[2] | 1709 | } |
---|
[320] | 1710 | |
---|
| 1711 | print $tb_computer->title(); |
---|
| 1712 | print $tb_computer->rule('-'); |
---|
| 1713 | print $tb_computer->body(); |
---|
| 1714 | |
---|
[63] | 1715 | return; |
---|
[2] | 1716 | } |
---|
| 1717 | |
---|
[218] | 1718 | #--------------------------------------------------------------- |
---|
[45] | 1719 | sub cmd_exportdb_html { |
---|
| 1720 | test_maindb_environnement(); |
---|
| 1721 | |
---|
[151] | 1722 | my $computerdb = computerdb_load(); |
---|
[45] | 1723 | |
---|
| 1724 | #<link rel="stylesheet" type="text/css" href="style-klask.css" /> |
---|
| 1725 | #<script src="sorttable-klask.js"></script> |
---|
| 1726 | |
---|
[63] | 1727 | print <<'END_HTML'; |
---|
[73] | 1728 | <table class="sortable" summary="Klask Host Database"> |
---|
[72] | 1729 | <caption>Klask Host Database</caption> |
---|
[45] | 1730 | <thead> |
---|
| 1731 | <tr> |
---|
[319] | 1732 | <th scope="col" class="klask-header-left">Switch ⇅</th> |
---|
[45] | 1733 | <th scope="col" class="sorttable_nosort">Port</th> |
---|
[269] | 1734 | <th scope="col" class="sorttable_nosort">Link</th> |
---|
[319] | 1735 | <th scope="col" class="sorttable_alpha">Hostname-FQ ⇅</th> |
---|
| 1736 | <th scope="col" class="hklask-ipv4">IPv4-Address ⇅</th> |
---|
| 1737 | <th scope="col" class="sorttable_alpha">MAC-Address ⇅</th> |
---|
| 1738 | <th scope="col" class="sorttable_alpha">VLAN ⇅</th> |
---|
| 1739 | <th scope="col" class="klask-header-right">Date ⇅</th> |
---|
[45] | 1740 | </tr> |
---|
| 1741 | </thead> |
---|
| 1742 | <tfoot> |
---|
| 1743 | <tr> |
---|
[73] | 1744 | <th scope="col" class="klask-footer-left">Switch</th> |
---|
[45] | 1745 | <th scope="col" class="fklask-port">Port</th> |
---|
[269] | 1746 | <th scope="col" class="fklask-link">Link</th> |
---|
[73] | 1747 | <th scope="col" class="fklask-hostname">Hostname-FQ</th> |
---|
[45] | 1748 | <th scope="col" class="fklask-ipv4">IPv4-Address</th> |
---|
| 1749 | <th scope="col" class="fklask-mac">MAC-Address</th> |
---|
[71] | 1750 | <th scope="col" class="fklask-vlan">VLAN</th> |
---|
[73] | 1751 | <th scope="col" class="klask-footer-right">Date</th> |
---|
[45] | 1752 | </tr> |
---|
| 1753 | </tfoot> |
---|
| 1754 | <tbody> |
---|
[63] | 1755 | END_HTML |
---|
[45] | 1756 | |
---|
| 1757 | my %mac_count = (); |
---|
| 1758 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 1759 | for my $ip (keys %{$computerdb}) { |
---|
[63] | 1760 | |
---|
[45] | 1761 | # to be improve in the future |
---|
[261] | 1762 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} eq ($computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}); # switch on himself ! |
---|
[63] | 1763 | |
---|
[261] | 1764 | $mac_count{$computerdb->{$ip}{'mac_address'}}++; |
---|
[45] | 1765 | } |
---|
| 1766 | |
---|
| 1767 | my $typerow = 'even'; |
---|
| 1768 | |
---|
| 1769 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 1770 | for my $ip (Net::Netmask::sort_by_ip_address(keys %{$computerdb})) { |
---|
[63] | 1771 | |
---|
[45] | 1772 | # to be improve in the future |
---|
[261] | 1773 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} eq ($computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}); # switch on himself ! |
---|
[45] | 1774 | |
---|
[261] | 1775 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $computerdb->{$ip}{'timestamp'}; |
---|
[45] | 1776 | $year += 1900; |
---|
| 1777 | $mon++; |
---|
[63] | 1778 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[45] | 1779 | |
---|
| 1780 | # $odd_or_even++; |
---|
| 1781 | # my $typerow = $odd_or_even % 2 ? 'odd' : 'even'; |
---|
[63] | 1782 | $typerow = $typerow eq 'even' ? 'odd' : 'even'; |
---|
[45] | 1783 | |
---|
[265] | 1784 | #my $arrow ='←'; |
---|
| 1785 | # $arrow ='⇐' if $computerdb->{$ip}{'switch_port_hr'} =~ m/^(Trk|Br|Po)/; |
---|
[266] | 1786 | my $arrow ='⟵'; |
---|
| 1787 | $arrow ='⟸' if $computerdb->{$ip}{'switch_port_hr'} =~ m/^(Trk|Br|Po)/; |
---|
[163] | 1788 | |
---|
[261] | 1789 | my $switch_hostname = $computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'} || 'unkown'; |
---|
[45] | 1790 | chomp $switch_hostname; |
---|
[270] | 1791 | my $switch_hostname_sort = sprintf '%s %06i' ,$switch_hostname, $computerdb->{$ip}{'switch_port_id'}; # Take switch index |
---|
[45] | 1792 | |
---|
[63] | 1793 | my $ip_sort = sprintf '%03i%03i%03i%03i', split m/ \. /xms, $ip; |
---|
[45] | 1794 | |
---|
[261] | 1795 | my $mac_sort = sprintf '%04i-%s', 9999 - $mac_count{$computerdb->{$ip}{'mac_address'}}, $computerdb->{$ip}{'mac_address'}; |
---|
[45] | 1796 | |
---|
[261] | 1797 | $computerdb->{$ip}{'hostname_fq'} = 'unknow' if $computerdb->{$ip}{'hostname_fq'} =~ m/^ \d+ \. \d+ \. \d+ \. \d+ $/xms; |
---|
| 1798 | my ( $host_short ) = split m/ \. /xms, $computerdb->{$ip}{'hostname_fq'}; |
---|
[45] | 1799 | |
---|
[178] | 1800 | my $vlan = ''; |
---|
[262] | 1801 | $vlan = $computerdb->{$ip}{'network'}.' ('.get_current_vlan_id($computerdb->{$ip}{'network'}).')' if $computerdb->{$ip}{'network'}; |
---|
[71] | 1802 | |
---|
[261] | 1803 | my $parent_port_hr = format_aggregator4html($computerdb->{$ip}{'switch_port_hr'}); |
---|
[253] | 1804 | |
---|
[317] | 1805 | fqdn_html_breakable($switch_hostname); |
---|
| 1806 | fqdn_html_breakable(my $hostname_fq_html = $computerdb->{$ip}{'hostname_fq'}); |
---|
| 1807 | |
---|
[63] | 1808 | print <<"END_HTML"; |
---|
[45] | 1809 | <tr class="$typerow"> |
---|
| 1810 | <td sorttable_customkey="$switch_hostname_sort">$switch_hostname</td> |
---|
[253] | 1811 | <td class="bklask-port">$parent_port_hr</td> |
---|
[314] | 1812 | <td class="bklask-arrow">$arrow</td> |
---|
[317] | 1813 | <td sorttable_customkey="$host_short">$hostname_fq_html</td> |
---|
[45] | 1814 | <td sorttable_customkey="$ip_sort">$ip</td> |
---|
[261] | 1815 | <td sorttable_customkey="$mac_sort">$computerdb->{$ip}{'mac_address'}</td> |
---|
[71] | 1816 | <td>$vlan</td> |
---|
[45] | 1817 | <td>$date</td> |
---|
| 1818 | </tr> |
---|
[63] | 1819 | END_HTML |
---|
[45] | 1820 | } |
---|
| 1821 | |
---|
| 1822 | my $switch_connection = YAML::Syck::LoadFile("$KLASK_SW_FILE"); |
---|
| 1823 | |
---|
[261] | 1824 | my %db_switch_output_port = %{$switch_connection->{'output_port'}}; |
---|
| 1825 | my %db_switch_parent = %{$switch_connection->{'parent'}}; |
---|
| 1826 | my %db_switch_connected_on_port = %{$switch_connection->{'connected_on_port'}}; |
---|
| 1827 | my %db_switch = %{$switch_connection->{'switch_db'}}; |
---|
[45] | 1828 | |
---|
[266] | 1829 | # Output switch connection |
---|
| 1830 | LOOP_ON_OUTPUT_SWITCH: |
---|
[45] | 1831 | for my $sw (sort keys %db_switch_output_port) { |
---|
| 1832 | |
---|
[63] | 1833 | my $switch_hostname_sort = sprintf '%s %3s' ,$sw, $db_switch_output_port{$sw}; |
---|
[45] | 1834 | |
---|
[63] | 1835 | $typerow = $typerow eq 'even' ? 'odd' : 'even'; |
---|
[45] | 1836 | |
---|
[264] | 1837 | #my $arrow ='⇾'; |
---|
| 1838 | # $arrow ='⇨' if $db_switch_output_port{$sw} =~ m/^(Trk|Br|Po)/; |
---|
| 1839 | my $arrow ='⟼'; |
---|
| 1840 | $arrow ='⟾' if $db_switch_output_port{$sw} =~ m/^(Trk|Br|Po)/; |
---|
[163] | 1841 | |
---|
[45] | 1842 | if (exists $db_switch_parent{$sw}) { |
---|
[266] | 1843 | # Link to uplink switch |
---|
| 1844 | next LOOP_ON_OUTPUT_SWITCH; |
---|
[290] | 1845 | |
---|
[266] | 1846 | # Do not print anymore |
---|
[261] | 1847 | my $mac_address = $db_switch{$db_switch_parent{$sw}->{'switch'}}->{'mac_address'}; |
---|
| 1848 | my $ipv4_address = $db_switch{$db_switch_parent{$sw}->{'switch'}}->{'ipv4_address'}; |
---|
| 1849 | my $timestamp = $db_switch{$db_switch_parent{$sw}->{'switch'}}->{'timestamp'}; |
---|
[45] | 1850 | |
---|
[163] | 1851 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $timestamp; |
---|
| 1852 | $year += 1900; |
---|
| 1853 | $mon++; |
---|
| 1854 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[45] | 1855 | |
---|
[205] | 1856 | my $ip_sort = sprintf '%03i%03i%03i%03i', split m/ [\.\*] /xms, $ipv4_address; # \* for fake-ip |
---|
[45] | 1857 | |
---|
[163] | 1858 | my $mac_sort = sprintf '%04i-%s', 9999, $mac_address; |
---|
[45] | 1859 | |
---|
[261] | 1860 | my ( $host_short ) = sprintf '%s %3s' , split(m/ \. /xms, $db_switch_parent{$sw}->{'switch'}, 1), $db_switch_parent{$sw}->{'port_hr'}; |
---|
[45] | 1861 | |
---|
[263] | 1862 | my $vlan = $db_switch{$db_switch_parent{$sw}->{'switch'}}->{'network'}; |
---|
| 1863 | $vlan .= ' ('.get_current_vlan_id($db_switch{$db_switch_parent{$sw}->{'switch'}}->{'network'}).')' if $db_switch{$db_switch_parent{$sw}->{'switch'}}->{'network'}; |
---|
| 1864 | |
---|
[253] | 1865 | my $parent_port_hr = format_aggregator4html($db_switch_output_port{$sw}); |
---|
[261] | 1866 | my $child_port_hr = format_aggregator4html($db_switch_parent{$sw}->{'port_hr'}); |
---|
[253] | 1867 | |
---|
[317] | 1868 | fqdn_html_breakable($sw); |
---|
| 1869 | fqdn_html_breakable(my $sw_child_html = $db_switch_parent{$sw}->{'switch'}); |
---|
| 1870 | |
---|
[163] | 1871 | print <<"END_HTML"; |
---|
[45] | 1872 | <tr class="$typerow"> |
---|
| 1873 | <td sorttable_customkey="$switch_hostname_sort">$sw</td> |
---|
[253] | 1874 | <td class="bklask-port">$parent_port_hr</td> |
---|
[314] | 1875 | <td class="bklask-arrow">$arrow $child_port_hr</td> |
---|
[317] | 1876 | <td sorttable_customkey="$host_short">$sw_child_html</td> |
---|
[45] | 1877 | <td sorttable_customkey="$ip_sort">$ipv4_address</td> |
---|
| 1878 | <td sorttable_customkey="$mac_sort">$mac_address</td> |
---|
[263] | 1879 | <td>$vlan</td> |
---|
[45] | 1880 | <td>$date</td> |
---|
| 1881 | </tr> |
---|
[63] | 1882 | END_HTML |
---|
[45] | 1883 | } |
---|
| 1884 | else { |
---|
[266] | 1885 | # Router |
---|
[253] | 1886 | my $parent_port_hr = format_aggregator4html($db_switch_output_port{$sw}); |
---|
| 1887 | |
---|
[266] | 1888 | my $host_short = sprintf '%s %3s' ,$sw, $db_switch_output_port{$sw}; |
---|
| 1889 | |
---|
| 1890 | my $mac_address = $db_switch{$sw}->{'mac_address'}; |
---|
| 1891 | my $ipv4_address = $db_switch{$sw}->{'ipv4_address'}; |
---|
| 1892 | my $timestamp = $db_switch{$sw}->{'timestamp'}; |
---|
| 1893 | |
---|
| 1894 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $timestamp; |
---|
| 1895 | $year += 1900; |
---|
| 1896 | $mon++; |
---|
| 1897 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
| 1898 | |
---|
| 1899 | my $ip_sort = sprintf '%03i%03i%03i%03i', split m/ [\.\*] /xms, $ipv4_address; # \* for fake-ip |
---|
| 1900 | |
---|
| 1901 | my $mac_sort = sprintf '%04i-%s', 9999, $mac_address; |
---|
| 1902 | |
---|
| 1903 | my $vlan = $db_switch{$sw}->{'network'}; |
---|
| 1904 | $vlan .= ' ('.get_current_vlan_id($db_switch{$sw}->{'network'}).')' if $db_switch{$sw}->{'network'}; |
---|
| 1905 | |
---|
| 1906 | my $arrow ='⟻'; |
---|
| 1907 | $arrow ='⟽' if $db_switch_output_port{$sw} =~ m/^(Trk|Br|Po)/; |
---|
| 1908 | |
---|
[317] | 1909 | fqdn_html_breakable($sw); |
---|
| 1910 | |
---|
[63] | 1911 | print <<"END_HTML"; |
---|
[45] | 1912 | <tr class="$typerow"> |
---|
[266] | 1913 | <td sorttable_customkey="router">router</td> |
---|
| 1914 | <td class="bklask-port"></td> |
---|
[314] | 1915 | <td class="bklask-arrow">$arrow $parent_port_hr</td> |
---|
[266] | 1916 | <td sorttable_customkey="$host_short">$sw</td> |
---|
| 1917 | <td sorttable_customkey="$ip_sort">$ipv4_address</td> |
---|
| 1918 | <td sorttable_customkey="$mac_sort">$mac_address</td> |
---|
| 1919 | <td>$vlan</td> |
---|
| 1920 | <td>$date</td> |
---|
| 1921 | </tr> |
---|
| 1922 | END_HTML |
---|
| 1923 | next LOOP_ON_OUTPUT_SWITCH; |
---|
[45] | 1924 | } |
---|
| 1925 | } |
---|
| 1926 | |
---|
[266] | 1927 | # Child switch connection : parent <- child |
---|
[45] | 1928 | for my $swport (sort keys %db_switch_connected_on_port) { |
---|
[248] | 1929 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
[45] | 1930 | for my $sw (keys %{$db_switch_connected_on_port{$swport}}) { |
---|
| 1931 | |
---|
[63] | 1932 | my $switch_hostname_sort = sprintf '%s %3s' ,$sw_connect, $port_connect; |
---|
[45] | 1933 | |
---|
[261] | 1934 | my $mac_address = $db_switch{$sw}->{'mac_address'}; |
---|
| 1935 | my $ipv4_address = $db_switch{$sw}->{'ipv4_address'}; |
---|
| 1936 | my $timestamp = $db_switch{$sw}->{'timestamp'}; |
---|
[45] | 1937 | |
---|
[163] | 1938 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $timestamp; |
---|
| 1939 | $year += 1900; |
---|
| 1940 | $mon++; |
---|
| 1941 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year,$mon,$mday,$hour,$min; |
---|
[45] | 1942 | |
---|
[205] | 1943 | my $ip_sort = sprintf '%03i%03i%03i%03i', split m/ [\.\*] /xms, $ipv4_address; # \* for fake-ip |
---|
[45] | 1944 | |
---|
[163] | 1945 | my $mac_sort = sprintf '%04i-%s', 9999, $mac_address; |
---|
[45] | 1946 | |
---|
[163] | 1947 | $typerow = $typerow eq 'even' ? 'odd' : 'even'; |
---|
[45] | 1948 | |
---|
[264] | 1949 | #my $arrow ='⇽'; |
---|
| 1950 | # $arrow ='⇦' if $port_connect =~ m/^(Trk|Br|Po)/; |
---|
| 1951 | my $arrow ='⟻'; |
---|
| 1952 | $arrow ='⟽' if $port_connect =~ m/^(Trk|Br|Po)/; |
---|
[163] | 1953 | |
---|
[263] | 1954 | my $vlan = $db_switch{$sw}->{'network'}; |
---|
| 1955 | $vlan .= ' ('.get_current_vlan_id($db_switch{$sw}->{'network'}).')' if $db_switch{$sw}->{'network'}; |
---|
| 1956 | |
---|
[45] | 1957 | if (exists $db_switch_output_port{$sw}) { |
---|
| 1958 | |
---|
[63] | 1959 | my ( $host_short ) = sprintf '%s %3s' , split( m/\./xms, $sw, 1), $db_switch_output_port{$sw}; |
---|
[45] | 1960 | |
---|
[253] | 1961 | my $parent_port_hr = format_aggregator4html($port_connect); |
---|
| 1962 | my $child_port_hr = format_aggregator4html($db_switch_output_port{$sw}); |
---|
| 1963 | |
---|
[317] | 1964 | fqdn_html_breakable($sw); |
---|
| 1965 | fqdn_html_breakable($sw_connect); |
---|
| 1966 | |
---|
[63] | 1967 | print <<"END_HTML"; |
---|
[45] | 1968 | <tr class="$typerow"> |
---|
| 1969 | <td sorttable_customkey="$switch_hostname_sort">$sw_connect</td> |
---|
[253] | 1970 | <td class="bklask-port">$parent_port_hr</td> |
---|
[314] | 1971 | <td class="bklask-arrow">$arrow $child_port_hr</td> |
---|
[162] | 1972 | <td sorttable_customkey="$host_short">$sw</td> |
---|
[45] | 1973 | <td sorttable_customkey="$ip_sort">$ipv4_address</td> |
---|
| 1974 | <td sorttable_customkey="$mac_sort">$mac_address</td> |
---|
[263] | 1975 | <td>$vlan</td> |
---|
[45] | 1976 | <td>$date</td> |
---|
| 1977 | </tr> |
---|
[63] | 1978 | END_HTML |
---|
[45] | 1979 | } |
---|
| 1980 | else { |
---|
[253] | 1981 | my $parent_port_hr = format_aggregator4html($port_connect); |
---|
| 1982 | |
---|
[317] | 1983 | fqdn_html_breakable($sw); |
---|
| 1984 | fqdn_html_breakable($sw_connect); |
---|
| 1985 | |
---|
[63] | 1986 | print <<"END_HTML"; |
---|
[45] | 1987 | <tr class="$typerow"> |
---|
| 1988 | <td sorttable_customkey="$switch_hostname_sort">$sw_connect</td> |
---|
[253] | 1989 | <td class="bklask-port">$parent_port_hr</td> |
---|
[314] | 1990 | <td class="bklask-arrow">$arrow</td> |
---|
[162] | 1991 | <td sorttable_customkey="$sw">$sw</td> |
---|
[45] | 1992 | <td sorttable_customkey="">$ipv4_address</td> |
---|
| 1993 | <td sorttable_customkey="">$mac_address</td> |
---|
[263] | 1994 | <td>$vlan</td> |
---|
[45] | 1995 | <td>$date</td> |
---|
| 1996 | </tr> |
---|
[63] | 1997 | END_HTML |
---|
[45] | 1998 | } |
---|
| 1999 | } |
---|
| 2000 | } |
---|
| 2001 | |
---|
[63] | 2002 | print <<'END_HTML'; |
---|
[45] | 2003 | </tbody> |
---|
| 2004 | </table> |
---|
[63] | 2005 | END_HTML |
---|
| 2006 | return; |
---|
[45] | 2007 | } |
---|
| 2008 | |
---|
[218] | 2009 | #--------------------------------------------------------------- |
---|
[133] | 2010 | sub cmd_bad_vlan_id { |
---|
[224] | 2011 | @ARGV = @_; |
---|
| 2012 | |
---|
| 2013 | my $days_before_alert = $DEFAULT{'days-before-alert'} || 15; |
---|
[326] | 2014 | my $format = 'txt'; |
---|
[224] | 2015 | my $verbose; |
---|
| 2016 | |
---|
| 2017 | GetOptions( |
---|
[326] | 2018 | 'day|d=i' => \$days_before_alert, |
---|
| 2019 | 'format|f=s' => \$format, |
---|
[224] | 2020 | ); |
---|
| 2021 | |
---|
[326] | 2022 | my %possible_format = ( |
---|
| 2023 | txt => \&cmd_bad_vlan_id_txt, |
---|
| 2024 | html => \&cmd_bad_vlan_id_html, |
---|
| 2025 | none => sub {}, |
---|
| 2026 | ); |
---|
| 2027 | $format = 'txt' if not defined $possible_format{$format}; |
---|
| 2028 | |
---|
[114] | 2029 | test_maindb_environnement(); |
---|
| 2030 | |
---|
[151] | 2031 | my $computerdb = computerdb_load(); |
---|
[114] | 2032 | |
---|
[132] | 2033 | # create a database with the most recent computer by switch port |
---|
[211] | 2034 | my %switchportdb = (); |
---|
[114] | 2035 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 2036 | for my $ip (keys %{$computerdb}) { |
---|
[114] | 2037 | # to be improve in the future |
---|
[261] | 2038 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} eq ($computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}); # switch on himself ! |
---|
| 2039 | next LOOP_ON_IP_ADDRESS if ($computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}) eq 'unknow'; |
---|
[270] | 2040 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'switch_port_id'} eq '0'; |
---|
[114] | 2041 | |
---|
[261] | 2042 | my $ip_timestamp = $computerdb->{$ip}{'timestamp'}; |
---|
| 2043 | my $ip_mac = $computerdb->{$ip}{'mac_address'}; |
---|
| 2044 | my $ip_hostname_fq = $computerdb->{$ip}{'hostname_fq'}; |
---|
[114] | 2045 | |
---|
[115] | 2046 | my $swpt = sprintf "%-28s %2s", |
---|
[261] | 2047 | $computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}, |
---|
| 2048 | $computerdb->{$ip}{'switch_port_hr'}; |
---|
[211] | 2049 | $switchportdb{$swpt} ||= { |
---|
[114] | 2050 | ip => $ip, |
---|
| 2051 | timestamp => $ip_timestamp, |
---|
[262] | 2052 | vlan => $computerdb->{$ip}{'network'}, |
---|
[114] | 2053 | hostname_fq => $ip_hostname_fq, |
---|
| 2054 | mac_address => $ip_mac, |
---|
| 2055 | }; |
---|
[117] | 2056 | |
---|
[132] | 2057 | # if float computer, set date 15 day before warning... |
---|
| 2058 | my $ip_timestamp_mod = $ip_timestamp; |
---|
[261] | 2059 | my $ip_timestamp_ref = $switchportdb{$swpt}->{'timestamp'}; |
---|
[224] | 2060 | $ip_timestamp_mod -= $days_before_alert * 24 * 3600 if $ip_hostname_fq =~ m/$RE_FLOAT_HOSTNAME/; |
---|
[261] | 2061 | $ip_timestamp_ref -= $days_before_alert * 24 * 3600 if $switchportdb{$swpt}->{'hostname_fq'} =~ m/$RE_FLOAT_HOSTNAME/; |
---|
[198] | 2062 | |
---|
[132] | 2063 | if ($ip_timestamp_mod > $ip_timestamp_ref) { |
---|
[211] | 2064 | $switchportdb{$swpt} = { |
---|
[114] | 2065 | ip => $ip, |
---|
| 2066 | timestamp => $ip_timestamp, |
---|
[262] | 2067 | vlan => $computerdb->{$ip}{'network'}, |
---|
[114] | 2068 | hostname_fq => $ip_hostname_fq, |
---|
| 2069 | mac_address => $ip_mac, |
---|
| 2070 | }; |
---|
| 2071 | } |
---|
| 2072 | } |
---|
| 2073 | |
---|
[326] | 2074 | my @result = (); |
---|
[321] | 2075 | |
---|
[133] | 2076 | LOOP_ON_RECENT_COMPUTER: |
---|
[211] | 2077 | for my $swpt (keys %switchportdb) { |
---|
[133] | 2078 | next LOOP_ON_RECENT_COMPUTER if $swpt =~ m/^\s*0$/; |
---|
[261] | 2079 | next LOOP_ON_RECENT_COMPUTER if $switchportdb{$swpt}->{'hostname_fq'} !~ m/$RE_FLOAT_HOSTNAME/; |
---|
[117] | 2080 | |
---|
[310] | 2081 | my $src_ip = $switchportdb{$swpt}->{'ip'}; |
---|
[114] | 2082 | my $src_timestamp = 0; |
---|
[133] | 2083 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 2084 | for my $ip (keys %{$computerdb}) { |
---|
[261] | 2085 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'mac_address'} ne $switchportdb{$swpt}->{'mac_address'}; |
---|
| 2086 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} =~ m/$RE_FLOAT_HOSTNAME/; |
---|
| 2087 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'timestamp'} < $src_timestamp; |
---|
[198] | 2088 | |
---|
[114] | 2089 | $src_ip = $ip; |
---|
[261] | 2090 | $src_timestamp = $computerdb->{$ip}{'timestamp'}; |
---|
[114] | 2091 | } |
---|
[132] | 2092 | |
---|
| 2093 | # keep only if float computer is the most recent |
---|
[133] | 2094 | next LOOP_ON_RECENT_COMPUTER if $src_timestamp == 0; |
---|
[261] | 2095 | next LOOP_ON_RECENT_COMPUTER if $switchportdb{$swpt}->{'timestamp'} < $src_timestamp; |
---|
[132] | 2096 | |
---|
[261] | 2097 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $switchportdb{$swpt}->{'timestamp'}; |
---|
[114] | 2098 | $year += 1900; |
---|
| 2099 | $mon++; |
---|
[132] | 2100 | my $date = sprintf '%04i-%02i-%02i/%02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[114] | 2101 | |
---|
[261] | 2102 | ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $computerdb->{$src_ip}{'timestamp'}; |
---|
[114] | 2103 | $year += 1900; |
---|
| 2104 | $mon++; |
---|
[132] | 2105 | my $src_date = sprintf '%04i-%02i-%02i/%02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[114] | 2106 | |
---|
[262] | 2107 | my $vlan_id = get_current_vlan_id($computerdb->{$src_ip}{'network'}); |
---|
[321] | 2108 | my ($switch_hostname, $port_hr) = split /\s+/, $swpt, 2; |
---|
[326] | 2109 | |
---|
| 2110 | push @result, { |
---|
| 2111 | switch => $switch_hostname, |
---|
| 2112 | port_hr => $port_hr, |
---|
| 2113 | vlan_bad => $switchportdb{$swpt}->{'vlan'}, |
---|
| 2114 | vlan_good =>$computerdb->{$src_ip}{'network'}, |
---|
| 2115 | vlan_id => $vlan_id, |
---|
| 2116 | date_last => $date, |
---|
| 2117 | date_good => $src_date, |
---|
| 2118 | mac_address => $computerdb->{$src_ip}{'mac_address'}, |
---|
| 2119 | hostname_fq => $computerdb->{$src_ip}{'hostname_fq'}, |
---|
| 2120 | }; |
---|
| 2121 | } |
---|
| 2122 | |
---|
| 2123 | $possible_format{$format}->(@result); |
---|
| 2124 | } |
---|
| 2125 | |
---|
| 2126 | #--------------------------------------------------------------- |
---|
| 2127 | sub cmd_bad_vlan_id_txt { |
---|
[327] | 2128 | my @result = @_; |
---|
[326] | 2129 | |
---|
| 2130 | my $tb_bad = Text::Table->new( |
---|
| 2131 | {align => 'left', align_title => 'left', title => 'Switch'}, |
---|
| 2132 | {is_sep => 1, title => ' ', body => ' '}, |
---|
| 2133 | {align => 'right', align_title => 'right', title => 'Port'}, |
---|
| 2134 | {is_sep => 1, title => ' ', body => ' !'}, |
---|
| 2135 | {align => 'left', align_title => 'left', title => 'VLAN-Bad'}, |
---|
| 2136 | {is_sep => 1, title => ' ', body => ' +-> '}, |
---|
| 2137 | {align => 'left', align_title => 'left', title => 'VLAN-Good'}, |
---|
| 2138 | {is_sep => 1, title => ' ', body => ' '}, |
---|
| 2139 | {align => 'left', align_title => 'left', title => 'VLAN-ID'}, |
---|
| 2140 | {is_sep => 1, title => ' ', body => ' '}, |
---|
| 2141 | {align => 'left', align_title => 'left', title => 'Date-Last'}, |
---|
| 2142 | {is_sep => 1, title => ' ', body => ' '}, |
---|
| 2143 | {align => 'left', align_title => 'left', title => 'Date-Good'}, |
---|
| 2144 | {is_sep => 1, title => ' ', body => ' '}, |
---|
| 2145 | {align => 'left', align_title => 'left', title => 'MAC-Address'}, |
---|
| 2146 | {is_sep => 1, title => ' ', body => ' '}, |
---|
| 2147 | {align => 'left', align_title => 'left', title => 'Hostname-FQ'}, |
---|
| 2148 | ); |
---|
| 2149 | |
---|
| 2150 | for my $item (@result) { |
---|
[321] | 2151 | $tb_bad->add( |
---|
[326] | 2152 | $item->{'switch'}, |
---|
| 2153 | $item->{'port_hr'}, |
---|
| 2154 | $item->{'vlan_bad'}, |
---|
| 2155 | $item->{'vlan_good'}, |
---|
| 2156 | '(' . $item->{'vlan_id'} . ')', |
---|
| 2157 | $item->{'date_last'}, |
---|
| 2158 | $item->{'date_good'}, |
---|
| 2159 | $item->{'mac_address'}, |
---|
| 2160 | $item->{'hostname_fq'}, |
---|
[321] | 2161 | ); |
---|
[114] | 2162 | } |
---|
[326] | 2163 | |
---|
[322] | 2164 | print $tb_bad->title(); |
---|
| 2165 | print $tb_bad->rule('-'); |
---|
[321] | 2166 | print $tb_bad->body(); |
---|
[114] | 2167 | } |
---|
| 2168 | |
---|
[218] | 2169 | #--------------------------------------------------------------- |
---|
[326] | 2170 | sub cmd_bad_vlan_id_html { |
---|
[327] | 2171 | my @result = @_; |
---|
[326] | 2172 | |
---|
| 2173 | print <<'END_HTML'; |
---|
| 2174 | <table class="sortable" summary="Klask Bad VLAN ID Database"> |
---|
| 2175 | <caption>Klask Bad VLAN ID Database</caption> |
---|
| 2176 | <thead> |
---|
| 2177 | <tr> |
---|
| 2178 | <th scope="col" class="klask-header-left">Switch ⇅</th> |
---|
| 2179 | <th scope="col" class="sorttable_nosort">Port</th> |
---|
| 2180 | <th scope="col" class="sorttable_alpha">VLAN-Bad ⇅</th> |
---|
| 2181 | <th scope="col" class="sorttable_alpha">VLAN-Good ⇅</th> |
---|
| 2182 | <th scope="col" class="sorttable_alpha">Date-Last ⇅</th> |
---|
| 2183 | <th scope="col" class="sorttable_alpha">Date-Good ⇅</th> |
---|
| 2184 | <th scope="col" class="sorttable_alpha">MAC-Address ⇅</th> |
---|
| 2185 | <th scope="col" class="sorttable_alpha">Hostname-FQ ⇅</th> |
---|
| 2186 | </tr> |
---|
| 2187 | </thead> |
---|
| 2188 | <tfoot> |
---|
| 2189 | <tr> |
---|
| 2190 | <th scope="col" class="klask-footer-left">Switch</th> |
---|
| 2191 | <th scope="col" class="fklask-nosort">Port</th> |
---|
| 2192 | <th scope="col" class="fklask-alpha">VLAN-Bad</th> |
---|
| 2193 | <th scope="col" class="fklask-alpha">VLAN-Good</th> |
---|
| 2194 | <th scope="col" class="fklask-alpha">Date-Last</th> |
---|
| 2195 | <th scope="col" class="fklask-alpha">Date-Good</th> |
---|
| 2196 | <th scope="col" class="fklask-alpha">MAC-Address</th> |
---|
| 2197 | <th scope="col" class="fklask-alpha">Hostname-FQ</th> |
---|
| 2198 | </tr> |
---|
| 2199 | </tfoot> |
---|
| 2200 | <tbody> |
---|
| 2201 | END_HTML |
---|
| 2202 | |
---|
| 2203 | my $typerow = 'even'; |
---|
| 2204 | |
---|
| 2205 | for my $item (@result) { |
---|
| 2206 | |
---|
| 2207 | $typerow = $typerow eq 'even' ? 'odd' : 'even'; |
---|
| 2208 | |
---|
| 2209 | my $switch_hostname_sort = sprintf '%s %3s' ,$item->{'switch'}, $item->{'port_hr'}; |
---|
[328] | 2210 | my ( $host_short ) = split m/ \. /xms, $item->{'hostname_fq'}; |
---|
[326] | 2211 | |
---|
| 2212 | my $vlan_nameid = $item->{'vlan_good'} . ' (' . $item->{'vlan_id'} . ')'; |
---|
| 2213 | |
---|
| 2214 | fqdn_html_breakable(my $hostname_fq_html = $item->{'hostname_fq'}); |
---|
| 2215 | |
---|
| 2216 | print <<"END_HTML"; |
---|
| 2217 | <tr class="$typerow"> |
---|
| 2218 | <td sorttable_customkey="$switch_hostname_sort">$item->{'switch'}</td> |
---|
[330] | 2219 | <td class="bklask-port">$item->{'port_hr'}</td> |
---|
[326] | 2220 | <td>!$item->{'vlan_bad'}</td> |
---|
| 2221 | <td>$vlan_nameid</td> |
---|
| 2222 | <td>$item->{'date_last'}</td> |
---|
| 2223 | <td>$item->{'date_good'}</td> |
---|
| 2224 | <td>$item->{'mac_address'}</td> |
---|
| 2225 | <td sorttable_customkey="$host_short">$hostname_fq_html</td> |
---|
| 2226 | </tr> |
---|
| 2227 | END_HTML |
---|
| 2228 | } |
---|
| 2229 | print <<'END_HTML'; |
---|
| 2230 | </tbody> |
---|
| 2231 | </table> |
---|
| 2232 | END_HTML |
---|
| 2233 | } |
---|
| 2234 | |
---|
| 2235 | #--------------------------------------------------------------- |
---|
[239] | 2236 | sub cmd_poe_enable { |
---|
| 2237 | @ARGV = @_; |
---|
| 2238 | |
---|
| 2239 | my $verbose; |
---|
| 2240 | GetOptions( |
---|
| 2241 | 'verbose|v' => \$verbose, |
---|
| 2242 | ); |
---|
| 2243 | |
---|
| 2244 | my $switch_name = shift @ARGV || q{}; |
---|
| 2245 | my $switch_port = shift @ARGV || q{}; |
---|
| 2246 | |
---|
| 2247 | if ($switch_name eq q{} or $switch_port eq q{}) { |
---|
| 2248 | die "Usage: klask poe-enable SWITCH_NAME PORT\n"; |
---|
| 2249 | } |
---|
| 2250 | |
---|
| 2251 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2252 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2253 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2254 | } |
---|
| 2255 | |
---|
[277] | 2256 | my $oid_search = $OID_NUMBER{'NApoeState'} . ".$switch_port"; # Only NEXANS switch and low port number |
---|
[239] | 2257 | |
---|
| 2258 | my $sw = $SWITCH_DB{$sw_name}; |
---|
| 2259 | my ($session, $error) = Net::SNMP->session(snmp_get_rwsession($sw)); |
---|
| 2260 | print "$error \n" if $error; |
---|
| 2261 | |
---|
| 2262 | my $result = $session->set_request( |
---|
[277] | 2263 | -varbindlist => [$oid_search, INTEGER, 8], # Only NEXANS |
---|
[239] | 2264 | ); |
---|
| 2265 | print $session->error()."\n" if $session->error_status(); |
---|
| 2266 | |
---|
| 2267 | $session->close; |
---|
| 2268 | } |
---|
| 2269 | cmd_poe_status($switch_name, $switch_port); |
---|
| 2270 | return; |
---|
| 2271 | } |
---|
| 2272 | |
---|
| 2273 | #--------------------------------------------------------------- |
---|
| 2274 | sub cmd_poe_disable { |
---|
| 2275 | @ARGV = @_; |
---|
| 2276 | |
---|
| 2277 | my $verbose; |
---|
| 2278 | GetOptions( |
---|
| 2279 | 'verbose|v' => \$verbose, |
---|
| 2280 | ); |
---|
| 2281 | |
---|
| 2282 | my $switch_name = shift @ARGV || q{}; |
---|
| 2283 | my $switch_port = shift @ARGV || q{}; |
---|
| 2284 | |
---|
| 2285 | if ($switch_name eq q{} or $switch_port eq q{}) { |
---|
| 2286 | die "Usage: klask poe-disable SWITCH_NAME PORT\n"; |
---|
| 2287 | } |
---|
| 2288 | |
---|
| 2289 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2290 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2291 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2292 | } |
---|
| 2293 | |
---|
[277] | 2294 | my $oid_search = $OID_NUMBER{'NApoeState'} . ".$switch_port"; # Only NEXANS switch and low port number |
---|
[239] | 2295 | |
---|
| 2296 | my $sw = $SWITCH_DB{$sw_name}; |
---|
| 2297 | my ($session, $error) = Net::SNMP->session(snmp_get_rwsession($sw)); |
---|
| 2298 | print "$error \n" if $error; |
---|
| 2299 | |
---|
| 2300 | my $result = $session->set_request( |
---|
[277] | 2301 | -varbindlist => [$oid_search, INTEGER, 2], # Only NEXANS |
---|
[239] | 2302 | ); |
---|
| 2303 | print $session->error()."\n" if $session->error_status(); |
---|
| 2304 | |
---|
| 2305 | $session->close; |
---|
| 2306 | } |
---|
| 2307 | cmd_poe_status($switch_name, $switch_port); |
---|
| 2308 | return; |
---|
| 2309 | } |
---|
| 2310 | |
---|
| 2311 | #--------------------------------------------------------------- |
---|
| 2312 | sub cmd_poe_status { |
---|
| 2313 | @ARGV = @_; |
---|
| 2314 | |
---|
| 2315 | my $verbose; |
---|
| 2316 | GetOptions( |
---|
| 2317 | 'verbose|v' => \$verbose, |
---|
| 2318 | ); |
---|
| 2319 | |
---|
| 2320 | my $switch_name = shift @ARGV || q{}; |
---|
| 2321 | my $switch_port = shift @ARGV || q{}; |
---|
| 2322 | |
---|
| 2323 | if ($switch_name eq q{} or $switch_port eq q{}) { |
---|
| 2324 | die "Usage: klask poe-status SWITCH_NAME PORT\n"; |
---|
| 2325 | } |
---|
| 2326 | |
---|
| 2327 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2328 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2329 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2330 | } |
---|
| 2331 | |
---|
[277] | 2332 | my $oid_search = $OID_NUMBER{'NApoeState'} . ".$switch_port"; # Only NEXANS switch and low port number |
---|
[239] | 2333 | |
---|
| 2334 | my $sw = $SWITCH_DB{$sw_name}; |
---|
| 2335 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
| 2336 | print "$error \n" if $error; |
---|
| 2337 | |
---|
| 2338 | my $result = $session->get_request( |
---|
[277] | 2339 | -varbindlist => [$oid_search], |
---|
[239] | 2340 | ); |
---|
| 2341 | |
---|
[277] | 2342 | if (defined $result and $result->{$oid_search} ne 'noSuchInstance') { |
---|
| 2343 | my $poe_status = $result->{$oid_search} || 'empty'; |
---|
[276] | 2344 | $poe_status =~ s/8/enable/; |
---|
| 2345 | $poe_status =~ s/2/disable/; |
---|
| 2346 | printf "%s %s poe %s\n", $sw_name, $switch_port, $poe_status; |
---|
[239] | 2347 | } |
---|
| 2348 | else { |
---|
[276] | 2349 | print "Klask do not find PoE status on switch $sw_name on port $switch_port\n"; |
---|
[239] | 2350 | } |
---|
| 2351 | |
---|
| 2352 | $session->close; |
---|
| 2353 | } |
---|
| 2354 | return; |
---|
| 2355 | } |
---|
| 2356 | |
---|
| 2357 | #--------------------------------------------------------------- |
---|
[305] | 2358 | sub cmd_host_setlocation { |
---|
| 2359 | @ARGV = @_; |
---|
| 2360 | |
---|
| 2361 | my ($verbose, $force); |
---|
| 2362 | GetOptions( |
---|
| 2363 | 'verbose|v' => \$verbose, |
---|
| 2364 | 'force|f' => \$force, |
---|
| 2365 | ); |
---|
| 2366 | |
---|
| 2367 | my $switch_name = shift @ARGV || q{}; |
---|
| 2368 | my $switch_location = shift @ARGV || q{}; |
---|
| 2369 | |
---|
| 2370 | if ($switch_name eq q{} or $switch_location eq q{}) { |
---|
| 2371 | die "Usage: klask host-setlocation SWITCH_NAME LOCATION\n"; |
---|
| 2372 | } |
---|
| 2373 | |
---|
| 2374 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2375 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2376 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2377 | } |
---|
| 2378 | |
---|
| 2379 | my $oid_search = $OID_NUMBER{'sysLocation'}; |
---|
| 2380 | |
---|
| 2381 | my $sw = $SWITCH_DB{$sw_name}; |
---|
| 2382 | my ($session, $error) = Net::SNMP->session(snmp_get_rwsession($sw)); |
---|
| 2383 | print "$error \n" if $error; |
---|
| 2384 | |
---|
| 2385 | my $result = $session->set_request( |
---|
| 2386 | -varbindlist => [$oid_search, OCTET_STRING, $switch_location], |
---|
| 2387 | ); |
---|
| 2388 | print $session->error()."\n" if $session->error_status(); |
---|
| 2389 | |
---|
| 2390 | $session->close; |
---|
| 2391 | } |
---|
| 2392 | return; |
---|
| 2393 | } |
---|
| 2394 | |
---|
| 2395 | #--------------------------------------------------------------- |
---|
[220] | 2396 | # not finish - do not use |
---|
[238] | 2397 | sub cmd_port_setvlan { |
---|
[129] | 2398 | my $switch_name = shift || q{}; |
---|
| 2399 | my $mac_address = shift || q{}; |
---|
| 2400 | |
---|
| 2401 | if ($switch_name eq q{} or $mac_address eq q{}) { |
---|
| 2402 | die "Usage: klask search-mac-on-switch SWITCH_NAME MAC_ADDRESS\n"; |
---|
| 2403 | } |
---|
| 2404 | |
---|
[261] | 2405 | $switch_name = join(',', map {$_->{'hostname'}} @SWITCH_LIST ) if $switch_name eq q{*}; |
---|
[129] | 2406 | |
---|
| 2407 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2408 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2409 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2410 | } |
---|
| 2411 | |
---|
[277] | 2412 | my $oid_search_port1 = $OID_NUMBER{'searchPort1'} . mac_address_hex2dec($mac_address); |
---|
| 2413 | my $oid_search_port2 = $OID_NUMBER{'searchPort2'} .'.'. 0 . mac_address_hex2dec($mac_address); |
---|
| 2414 | print "Klask search OID $oid_search_port1 on switch $sw_name\n"; |
---|
| 2415 | print "Klask search OID $oid_search_port2 on switch $sw_name\n"; |
---|
[129] | 2416 | |
---|
[209] | 2417 | my $sw = $SWITCH_DB{$sw_name}; |
---|
[221] | 2418 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[129] | 2419 | print "$error \n" if $error; |
---|
| 2420 | |
---|
| 2421 | my $result = $session->get_request( |
---|
[277] | 2422 | -varbindlist => [$oid_search_port1] |
---|
[129] | 2423 | ); |
---|
| 2424 | if (not defined $result) { |
---|
| 2425 | $result = $session->get_request( |
---|
[277] | 2426 | -varbindlist => [$oid_search_port2] |
---|
[129] | 2427 | ); |
---|
[277] | 2428 | $result->{$oid_search_port1} = $result->{$oid_search_port2} if defined $result; |
---|
[129] | 2429 | } |
---|
| 2430 | |
---|
[277] | 2431 | if (defined $result and $result->{$oid_search_port1} ne 'noSuchInstance') { |
---|
| 2432 | my $swport = $result->{$oid_search_port1}; |
---|
[129] | 2433 | print "Klask find MAC $mac_address on switch $sw_name port $swport\n"; |
---|
| 2434 | } |
---|
| 2435 | else { |
---|
| 2436 | print "Klask do not find MAC $mac_address on switch $sw_name\n"; |
---|
| 2437 | } |
---|
| 2438 | |
---|
| 2439 | $session->close; |
---|
| 2440 | } |
---|
| 2441 | return; |
---|
| 2442 | } |
---|
| 2443 | |
---|
[218] | 2444 | #--------------------------------------------------------------- |
---|
[238] | 2445 | sub cmd_port_getvlan { |
---|
[141] | 2446 | @ARGV = @_; |
---|
| 2447 | |
---|
| 2448 | my $verbose; |
---|
| 2449 | GetOptions( |
---|
| 2450 | 'verbose|v' => \$verbose, |
---|
| 2451 | ); |
---|
| 2452 | |
---|
| 2453 | my $switch_name = shift @ARGV || q{}; |
---|
| 2454 | my $switch_port = shift @ARGV || q{}; |
---|
| 2455 | |
---|
| 2456 | if ($switch_name eq q{} or $switch_port eq q{}) { |
---|
[238] | 2457 | die "Usage: klask port-getvlan SWITCH_NAME PORT\n"; |
---|
[141] | 2458 | } |
---|
| 2459 | |
---|
| 2460 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2461 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2462 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2463 | } |
---|
| 2464 | |
---|
[277] | 2465 | my $oid_search = $OID_NUMBER{'vlanPortDefault'} . ".$switch_port"; |
---|
[141] | 2466 | |
---|
[209] | 2467 | my $sw = $SWITCH_DB{$sw_name}; |
---|
[221] | 2468 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[141] | 2469 | print "$error \n" if $error; |
---|
| 2470 | |
---|
| 2471 | my $result = $session->get_request( |
---|
[277] | 2472 | -varbindlist => [$oid_search], |
---|
[141] | 2473 | ); |
---|
| 2474 | |
---|
[277] | 2475 | if (defined $result and $result->{$oid_search} ne 'noSuchInstance') { |
---|
| 2476 | my $vlan_id = $result->{$oid_search} || 'empty'; |
---|
[141] | 2477 | print "Klask VLAN Id $vlan_id on switch $sw_name on port $switch_port\n"; |
---|
| 2478 | } |
---|
| 2479 | else { |
---|
[142] | 2480 | print "Klask do not find VLAN Id on switch $sw_name on port $switch_port\n"; |
---|
[141] | 2481 | } |
---|
| 2482 | |
---|
| 2483 | $session->close; |
---|
| 2484 | } |
---|
| 2485 | return; |
---|
[129] | 2486 | } |
---|
| 2487 | |
---|
[218] | 2488 | #--------------------------------------------------------------- |
---|
[238] | 2489 | sub cmd_vlan_setname { |
---|
[129] | 2490 | } |
---|
| 2491 | |
---|
[218] | 2492 | #--------------------------------------------------------------- |
---|
[239] | 2493 | # snmpset -v 1 -c public sw1-batG0-legi.hmg.priv "$OID_NUMBER{'HPicfReset'}.0" i 2; |
---|
[141] | 2494 | sub cmd_rebootsw { |
---|
| 2495 | @ARGV = @_; |
---|
| 2496 | |
---|
| 2497 | my $verbose; |
---|
| 2498 | GetOptions( |
---|
| 2499 | 'verbose|v' => \$verbose, |
---|
| 2500 | ); |
---|
| 2501 | |
---|
| 2502 | my $switch_name = shift @ARGV || q{}; |
---|
| 2503 | |
---|
[142] | 2504 | if ($switch_name eq q{}) { |
---|
[141] | 2505 | die "Usage: klask rebootsw SWITCH_NAME\n"; |
---|
| 2506 | } |
---|
| 2507 | |
---|
| 2508 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2509 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2510 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2511 | } |
---|
| 2512 | |
---|
| 2513 | my $sw = $SWITCH_DB{$sw_name}; |
---|
[220] | 2514 | my ($session, $error) = Net::SNMP->session(snmp_get_rwsession($sw)); |
---|
[141] | 2515 | print "$error \n" if $error; |
---|
| 2516 | |
---|
| 2517 | my $result = $session->set_request( |
---|
[239] | 2518 | -varbindlist => ["$OID_NUMBER{'HPicfReset'}.0", INTEGER, 2], |
---|
[141] | 2519 | ); |
---|
| 2520 | |
---|
| 2521 | $session->close; |
---|
| 2522 | } |
---|
| 2523 | return; |
---|
| 2524 | } |
---|
| 2525 | |
---|
[218] | 2526 | #--------------------------------------------------------------- |
---|
[238] | 2527 | sub cmd_vlan_getname { |
---|
[129] | 2528 | my $switch_name = shift || q{}; |
---|
| 2529 | my $vlan_id = shift || q{}; |
---|
| 2530 | |
---|
| 2531 | if ($switch_name eq q{} or $vlan_id eq q{}) { |
---|
[238] | 2532 | die "Usage: klask vlan-getname SWITCH_NAME VLAN_ID\n"; |
---|
[129] | 2533 | } |
---|
| 2534 | |
---|
[261] | 2535 | $switch_name = join(',', map {$_->{'hostname'}} @SWITCH_LIST ) if $switch_name eq q{*}; |
---|
[129] | 2536 | |
---|
| 2537 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2538 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2539 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2540 | } |
---|
| 2541 | |
---|
[277] | 2542 | my $oid_search_vlan_name = $OID_NUMBER{'vlanName'} . ".$vlan_id"; |
---|
[129] | 2543 | |
---|
[209] | 2544 | my $sw = $SWITCH_DB{$sw_name}; |
---|
[221] | 2545 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[129] | 2546 | print "$error \n" if $error; |
---|
| 2547 | |
---|
| 2548 | my $result = $session->get_request( |
---|
[277] | 2549 | -varbindlist => [$oid_search_vlan_name] |
---|
[129] | 2550 | ); |
---|
| 2551 | |
---|
[277] | 2552 | if (defined $result and $result->{$oid_search_vlan_name} ne 'noSuchInstance') { |
---|
| 2553 | my $vlan_name = $result->{$oid_search_vlan_name} || 'empty'; |
---|
[130] | 2554 | print "Klask find VLAN $vlan_id on switch $sw_name with name $vlan_name\n"; |
---|
[129] | 2555 | } |
---|
| 2556 | else { |
---|
| 2557 | print "Klask do not find VLAN $vlan_id on switch $sw_name\n"; |
---|
| 2558 | } |
---|
| 2559 | |
---|
| 2560 | $session->close; |
---|
| 2561 | } |
---|
| 2562 | return; |
---|
| 2563 | } |
---|
| 2564 | |
---|
[218] | 2565 | #--------------------------------------------------------------- |
---|
[238] | 2566 | sub cmd_vlan_list { |
---|
[237] | 2567 | my $switch_name = shift || q{}; |
---|
| 2568 | |
---|
| 2569 | if ($switch_name eq q{}) { |
---|
[238] | 2570 | die "Usage: klask vlan-list SWITCH_NAME\n"; |
---|
[237] | 2571 | } |
---|
| 2572 | |
---|
[261] | 2573 | $switch_name = join(',', map {$_->{'hostname'}} @SWITCH_LIST ) if $switch_name eq q{*}; |
---|
[237] | 2574 | |
---|
| 2575 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2576 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2577 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2578 | } |
---|
| 2579 | |
---|
| 2580 | my $sw = $SWITCH_DB{$sw_name}; |
---|
| 2581 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
| 2582 | print "$error \n" if $error; |
---|
| 2583 | |
---|
| 2584 | my %vlandb = snmp_get_vlan_list($session); |
---|
| 2585 | $session->close; |
---|
[290] | 2586 | |
---|
[237] | 2587 | print "VLAN_ID - VLAN_NAME # $sw_name\n"; |
---|
[275] | 2588 | for my $vlan_id (keys %vlandb) { |
---|
| 2589 | printf "%7i - %s\n", $vlan_id, $vlandb{$vlan_id}; |
---|
[237] | 2590 | } |
---|
| 2591 | } |
---|
| 2592 | return; |
---|
| 2593 | } |
---|
| 2594 | |
---|
| 2595 | #--------------------------------------------------------------- |
---|
[111] | 2596 | sub cmd_ip_location { |
---|
[151] | 2597 | my $computerdb = computerdb_load(); |
---|
[2] | 2598 | |
---|
| 2599 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 2600 | for my $ip (Net::Netmask::sort_by_ip_address(keys %{$computerdb})) { |
---|
[2] | 2601 | |
---|
[261] | 2602 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'hostname_fq'} eq ($computerdb->{$ip}{'switch_hostname'} || $computerdb->{$ip}{'switch_description'}); # switch on himself ! |
---|
[2] | 2603 | |
---|
[261] | 2604 | my $sw_hostname = $computerdb->{$ip}{'switch_hostname'} || q{}; |
---|
[133] | 2605 | next LOOP_ON_IP_ADDRESS if $sw_hostname eq 'unknow'; |
---|
[63] | 2606 | |
---|
| 2607 | my $sw_location = q{}; |
---|
[133] | 2608 | LOOP_ON_ALL_SWITCH: |
---|
[196] | 2609 | for my $sw (@SWITCH_LIST) { |
---|
[261] | 2610 | next LOOP_ON_ALL_SWITCH if $sw_hostname ne $sw->{'hostname'}; |
---|
| 2611 | $sw_location = $sw->{'location'}; |
---|
[2] | 2612 | last; |
---|
| 2613 | } |
---|
| 2614 | |
---|
[63] | 2615 | printf "%s: \"%s\"\n", $ip, $sw_location if not $sw_location eq q{}; |
---|
[2] | 2616 | } |
---|
[63] | 2617 | return; |
---|
[2] | 2618 | } |
---|
| 2619 | |
---|
[218] | 2620 | #--------------------------------------------------------------- |
---|
[69] | 2621 | sub cmd_ip_free { |
---|
[224] | 2622 | @ARGV = @_; |
---|
[69] | 2623 | |
---|
[224] | 2624 | my $days_to_death = $DEFAULT{'days-to-death'} || 365 * 2; |
---|
[69] | 2625 | my $format = 'txt'; |
---|
[97] | 2626 | my $verbose; |
---|
[69] | 2627 | |
---|
[138] | 2628 | GetOptions( |
---|
[224] | 2629 | 'day|d=i' => \$days_to_death, |
---|
[69] | 2630 | 'format|f=s' => \$format, |
---|
[97] | 2631 | 'verbose|v' => \$verbose, |
---|
[69] | 2632 | ); |
---|
| 2633 | |
---|
[72] | 2634 | my %possible_format = ( |
---|
| 2635 | txt => \&cmd_ip_free_txt, |
---|
| 2636 | html => \&cmd_ip_free_html, |
---|
[97] | 2637 | none => sub {}, |
---|
[72] | 2638 | ); |
---|
| 2639 | $format = 'txt' if not defined $possible_format{$format}; |
---|
| 2640 | |
---|
[110] | 2641 | my @vlan_name = @ARGV; |
---|
[69] | 2642 | @vlan_name = get_list_network() if not @vlan_name; |
---|
| 2643 | |
---|
| 2644 | my $computerdb = {}; |
---|
[151] | 2645 | $computerdb = computerdb_load() if -e "$KLASK_DB_FILE"; |
---|
[69] | 2646 | my $timestamp = time; |
---|
| 2647 | |
---|
[224] | 2648 | my $timestamp_barrier = $timestamp - (3600 * 24 * $days_to_death); |
---|
[69] | 2649 | |
---|
[72] | 2650 | my %result_ip = (); |
---|
[69] | 2651 | |
---|
| 2652 | ALL_NETWORK: |
---|
| 2653 | for my $vlan (@vlan_name) { |
---|
| 2654 | |
---|
| 2655 | my @ip_list = get_list_ip($vlan); |
---|
[97] | 2656 | |
---|
[69] | 2657 | LOOP_ON_IP_ADDRESS: |
---|
| 2658 | for my $ip (@ip_list) { |
---|
| 2659 | |
---|
[135] | 2660 | if (exists $computerdb->{$ip}) { |
---|
[261] | 2661 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip}{'timestamp'} > $timestamp_barrier; |
---|
[198] | 2662 | |
---|
[261] | 2663 | my $mac_address = $computerdb->{$ip}{'mac_address'}; |
---|
[135] | 2664 | LOOP_ON_DATABASE: |
---|
[165] | 2665 | for my $ip_db (keys %{$computerdb}) { |
---|
[261] | 2666 | next LOOP_ON_DATABASE if $computerdb->{$ip_db}{'mac_address'} ne $mac_address; |
---|
| 2667 | next LOOP_ON_IP_ADDRESS if $computerdb->{$ip_db}{'timestamp'} > $timestamp_barrier; |
---|
[135] | 2668 | } |
---|
| 2669 | } |
---|
[69] | 2670 | |
---|
| 2671 | my $ip_date_last_detection = ''; |
---|
| 2672 | if (exists $computerdb->{$ip}) { |
---|
[261] | 2673 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $computerdb->{$ip}{'timestamp'}; |
---|
[69] | 2674 | $year += 1900; |
---|
| 2675 | $mon++; |
---|
| 2676 | $ip_date_last_detection = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
| 2677 | } |
---|
| 2678 | |
---|
| 2679 | my $packed_ip = scalar gethostbyname($ip); |
---|
| 2680 | my $hostname_fq = 'unknown'; |
---|
[186] | 2681 | $hostname_fq = scalar gethostbyaddr($packed_ip, AF_INET) || 'unknown' if defined $packed_ip and get_current_scan_mode($vlan) eq 'active'; |
---|
[135] | 2682 | |
---|
| 2683 | next LOOP_ON_IP_ADDRESS if $hostname_fq =~ m/$RE_FLOAT_HOSTNAME/; |
---|
| 2684 | |
---|
| 2685 | $result_ip{$ip} ||= {}; |
---|
[261] | 2686 | $result_ip{$ip}->{'date_last_detection'} = $ip_date_last_detection; |
---|
| 2687 | $result_ip{$ip}->{'hostname_fq'} = $hostname_fq; |
---|
| 2688 | $result_ip{$ip}->{'vlan'} = $vlan; |
---|
[97] | 2689 | |
---|
| 2690 | printf "VERBOSE_1: %-15s %-12s %s\n", $ip, $vlan, $hostname_fq if $verbose; |
---|
[69] | 2691 | } |
---|
| 2692 | } |
---|
| 2693 | |
---|
[72] | 2694 | $possible_format{$format}->(%result_ip); |
---|
| 2695 | } |
---|
| 2696 | |
---|
[218] | 2697 | #--------------------------------------------------------------- |
---|
[72] | 2698 | sub cmd_ip_free_txt { |
---|
| 2699 | my %result_ip = @_; |
---|
[198] | 2700 | |
---|
[324] | 2701 | my $tb_computer = Text::Table->new( |
---|
| 2702 | {align => 'left', align_title => 'left', title => 'IPv4-Address'}, |
---|
| 2703 | {align => 'left', align_title => 'left', title => 'Hostname-FQ'}, |
---|
| 2704 | {align => 'left', align_title => 'left', title => 'VLAN'}, |
---|
| 2705 | {align => 'left', align_title => 'left', title => 'Date'}, |
---|
| 2706 | ); |
---|
| 2707 | |
---|
| 2708 | #printf "%-15s %-40s %-16s %s\n", qw(IPv4-Address Hostname-FQ Date VLAN); |
---|
| 2709 | #print "-------------------------------------------------------------------------------\n"; |
---|
[72] | 2710 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 2711 | for my $ip (Net::Netmask::sort_by_ip_address(keys %result_ip)) { |
---|
[324] | 2712 | my $vlan_nameid = $result_ip{$ip}->{'vlan'}.'('.get_current_vlan_id($result_ip{$ip}->{'vlan'}).')'; |
---|
| 2713 | #printf "%-15s %-40s %-16s %s\n", $ip, $result_ip{$ip}->{'hostname_fq'}, $result_ip{$ip}->{'date_last_detection'}, $vlan_nameid; |
---|
| 2714 | $tb_computer->add( |
---|
| 2715 | $ip, |
---|
| 2716 | $result_ip{$ip}->{'hostname_fq'}, |
---|
| 2717 | $vlan_nameid, |
---|
| 2718 | $result_ip{$ip}->{'date_last_detection'}, |
---|
[325] | 2719 | ); |
---|
[69] | 2720 | } |
---|
[324] | 2721 | print $tb_computer->title(); |
---|
| 2722 | print $tb_computer->rule('-'); |
---|
| 2723 | print $tb_computer->body(); |
---|
[69] | 2724 | } |
---|
| 2725 | |
---|
[218] | 2726 | #--------------------------------------------------------------- |
---|
[72] | 2727 | sub cmd_ip_free_html { |
---|
| 2728 | my %result_ip = @_; |
---|
| 2729 | |
---|
| 2730 | print <<'END_HTML'; |
---|
[73] | 2731 | <table class="sortable" summary="Klask Free IP Database"> |
---|
| 2732 | <caption>Klask Free IP Database</caption> |
---|
[72] | 2733 | <thead> |
---|
| 2734 | <tr> |
---|
[324] | 2735 | <th scope="col" class="klask-header-left">IPv4-Address ⇅</th> |
---|
| 2736 | <th scope="col" class="sorttable_alpha">Hostname-FQ ⇅</th> |
---|
| 2737 | <th scope="col" class="sorttable_alpha">VLAN ⇅</th> |
---|
| 2738 | <th scope="col" class="klask-header-right">Date ⇅</th> |
---|
[72] | 2739 | </tr> |
---|
| 2740 | </thead> |
---|
| 2741 | <tfoot> |
---|
| 2742 | <tr> |
---|
[73] | 2743 | <th scope="col" class="klask-footer-left">IPv4-Address</th> |
---|
| 2744 | <th scope="col" class="fklask-hostname">Hostname-FQ</th> |
---|
[72] | 2745 | <th scope="col" class="fklask-vlan">VLAN</th> |
---|
[73] | 2746 | <th scope="col" class="klask-footer-right">Date</th> |
---|
[72] | 2747 | </tr> |
---|
| 2748 | </tfoot> |
---|
| 2749 | <tbody> |
---|
| 2750 | END_HTML |
---|
| 2751 | |
---|
| 2752 | my $typerow = 'even'; |
---|
| 2753 | |
---|
| 2754 | LOOP_ON_IP_ADDRESS: |
---|
[165] | 2755 | for my $ip (Net::Netmask::sort_by_ip_address(keys %result_ip)) { |
---|
[72] | 2756 | |
---|
| 2757 | $typerow = $typerow eq 'even' ? 'odd' : 'even'; |
---|
| 2758 | |
---|
| 2759 | my $ip_sort = sprintf '%03i%03i%03i%03i', split m/ \. /xms, $ip; |
---|
[261] | 2760 | my ( $host_short ) = split m/ \. /xms, $result_ip{$ip}->{'hostname_fq'}; |
---|
[72] | 2761 | |
---|
[324] | 2762 | my $vlan_nameid = $result_ip{$ip}->{'vlan'}.' ('.get_current_vlan_id($result_ip{$ip}->{'vlan'}).')'; |
---|
[180] | 2763 | |
---|
[324] | 2764 | fqdn_html_breakable(my $hostname_fq_html = $result_ip{$ip}->{'hostname_fq'}); |
---|
| 2765 | |
---|
[72] | 2766 | print <<"END_HTML"; |
---|
| 2767 | <tr class="$typerow"> |
---|
| 2768 | <td sorttable_customkey="$ip_sort">$ip</td> |
---|
[324] | 2769 | <td sorttable_customkey="$host_short">$hostname_fq_html</td> |
---|
[180] | 2770 | <td>$vlan_nameid</td> |
---|
[261] | 2771 | <td>$result_ip{$ip}->{'date_last_detection'}</td> |
---|
[72] | 2772 | </tr> |
---|
| 2773 | END_HTML |
---|
| 2774 | } |
---|
| 2775 | print <<'END_HTML'; |
---|
| 2776 | </tbody> |
---|
| 2777 | </table> |
---|
| 2778 | END_HTML |
---|
| 2779 | } |
---|
| 2780 | |
---|
[218] | 2781 | #--------------------------------------------------------------- |
---|
[2] | 2782 | sub cmd_enable { |
---|
[210] | 2783 | @ARGV = @_; |
---|
[63] | 2784 | |
---|
[210] | 2785 | my $verbose; |
---|
| 2786 | |
---|
| 2787 | GetOptions( |
---|
| 2788 | 'verbose|v' => \$verbose, |
---|
| 2789 | ); |
---|
| 2790 | |
---|
| 2791 | my $switch_name = shift @ARGV || q{}; |
---|
[276] | 2792 | my $port_hr = shift @ARGV || q{}; |
---|
[210] | 2793 | |
---|
[276] | 2794 | if ($switch_name eq q{} or $port_hr eq q{}) { |
---|
[210] | 2795 | die "Usage: klask disable SWITCH_NAME PORT\n"; |
---|
| 2796 | } |
---|
| 2797 | |
---|
| 2798 | if (not defined $SWITCH_DB{$switch_name}) { |
---|
| 2799 | die "Switch $switch_name must be defined in klask configuration file\n"; |
---|
| 2800 | } |
---|
| 2801 | |
---|
| 2802 | my $sw = $SWITCH_DB{$switch_name}; |
---|
[220] | 2803 | my ($session, $error) = Net::SNMP->session(snmp_get_rwsession($sw)); |
---|
[210] | 2804 | print "$error \n" if $error; |
---|
| 2805 | |
---|
[216] | 2806 | # Retrieve numeric port value |
---|
[276] | 2807 | my $port_id = snmp_get_switchport_hr2id($session, normalize_port_human_readable($port_hr), $verbose ? 'yes' : ''); |
---|
| 2808 | die "Error : Port $port_hr does not exist on switch $switch_name\n" if not $port_id =~ m/^\d+$/; |
---|
[216] | 2809 | |
---|
[277] | 2810 | my $oid_search_portstatus = $OID_NUMBER{'portUpDown'} .'.'. $port_id; |
---|
| 2811 | print "Info: switch $switch_name port $port_hr SNMP OID $oid_search_portstatus\n" if $verbose; |
---|
[216] | 2812 | |
---|
[210] | 2813 | my $result = $session->set_request( |
---|
[277] | 2814 | -varbindlist => [$oid_search_portstatus, INTEGER, 1], |
---|
[210] | 2815 | ); |
---|
[216] | 2816 | print $session->error()."\n" if $session->error_status(); |
---|
[210] | 2817 | |
---|
| 2818 | $session->close; |
---|
| 2819 | |
---|
[63] | 2820 | #snmpset -v 1 -c community X.X.X.X 1.3.6.1.2.1.2.2.1.7.NoPort = 1 (up) |
---|
| 2821 | #snmpset -v 1 -c community X.X.X.X 1.3.6.1.2.1.2.2.1.7.NoPort = 2 (down) |
---|
[210] | 2822 | #system "snmpset -v 1 -c public $switch 1.3.6.1.2.1.2.2.1.7.$port = 1"; |
---|
[63] | 2823 | return; |
---|
[2] | 2824 | } |
---|
| 2825 | |
---|
[218] | 2826 | #--------------------------------------------------------------- |
---|
[2] | 2827 | sub cmd_disable { |
---|
[210] | 2828 | @ARGV = @_; |
---|
[63] | 2829 | |
---|
[210] | 2830 | my $verbose; |
---|
| 2831 | |
---|
| 2832 | GetOptions( |
---|
| 2833 | 'verbose|v' => \$verbose, |
---|
| 2834 | ); |
---|
| 2835 | |
---|
| 2836 | my $switch_name = shift @ARGV || q{}; |
---|
[276] | 2837 | my $port_hr = shift @ARGV || q{}; |
---|
[210] | 2838 | |
---|
[276] | 2839 | if ($switch_name eq q{} or $port_hr eq q{}) { |
---|
[210] | 2840 | die "Usage: klask disable SWITCH_NAME PORT\n"; |
---|
| 2841 | } |
---|
| 2842 | |
---|
| 2843 | if (not defined $SWITCH_DB{$switch_name}) { |
---|
| 2844 | die "Switch $switch_name must be defined in klask configuration file\n"; |
---|
| 2845 | } |
---|
| 2846 | |
---|
| 2847 | my $sw = $SWITCH_DB{$switch_name}; |
---|
[220] | 2848 | my ($session, $error) = Net::SNMP->session(snmp_get_rwsession($sw)); |
---|
[210] | 2849 | print "$error \n" if $error; |
---|
| 2850 | |
---|
[216] | 2851 | # Retrieve numeric port value |
---|
[276] | 2852 | my $port_id = snmp_get_switchport_hr2id($session, normalize_port_human_readable($port_hr), $verbose ? 'yes' : ''); |
---|
| 2853 | die "Error : Port $port_hr does not exist on switch $switch_name\n" if not $port_id =~ m/^\d+$/; |
---|
[216] | 2854 | |
---|
[277] | 2855 | my $oid_search_portstatus = $OID_NUMBER{'portUpDown'} .'.'. $port_id; |
---|
| 2856 | print "Info: switch $switch_name port $port_hr SNMP OID $oid_search_portstatus\n" if $verbose; |
---|
[216] | 2857 | |
---|
[210] | 2858 | my $result = $session->set_request( |
---|
[277] | 2859 | -varbindlist => [$oid_search_portstatus, INTEGER, 2], |
---|
[210] | 2860 | ); |
---|
[213] | 2861 | print $session->error()."\n" if $session->error_status(); |
---|
[210] | 2862 | |
---|
| 2863 | $session->close; |
---|
| 2864 | |
---|
| 2865 | #system "snmpset -v 1 -c public $switch 1.3.6.1.2.1.2.2.1.7.$port = 2"; |
---|
[63] | 2866 | return; |
---|
[2] | 2867 | } |
---|
| 2868 | |
---|
[218] | 2869 | #--------------------------------------------------------------- |
---|
[2] | 2870 | sub cmd_status { |
---|
[206] | 2871 | @ARGV = @_; |
---|
[63] | 2872 | |
---|
[206] | 2873 | my $verbose; |
---|
| 2874 | |
---|
| 2875 | GetOptions( |
---|
| 2876 | 'verbose|v' => \$verbose, |
---|
| 2877 | ); |
---|
| 2878 | |
---|
| 2879 | my $switch_name = shift @ARGV || q{}; |
---|
[276] | 2880 | my $port_hr = shift @ARGV || q{}; |
---|
[206] | 2881 | |
---|
[276] | 2882 | if ($switch_name eq q{} or $port_hr eq q{}) { |
---|
[207] | 2883 | die "Usage: klask status SWITCH_NAME PORT\n"; |
---|
| 2884 | } |
---|
| 2885 | |
---|
| 2886 | if (not defined $SWITCH_DB{$switch_name}) { |
---|
| 2887 | die "Switch $switch_name must be defined in klask configuration file\n"; |
---|
| 2888 | } |
---|
| 2889 | |
---|
[206] | 2890 | my $sw = $SWITCH_DB{$switch_name}; |
---|
[221] | 2891 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[206] | 2892 | print "$error \n" if $error; |
---|
| 2893 | |
---|
[213] | 2894 | # Retrieve numeric port value |
---|
[276] | 2895 | my $port_id = snmp_get_switchport_hr2id($session, normalize_port_human_readable($port_hr), $verbose ? 'yes' : ''); |
---|
| 2896 | die "Error : Port $port_hr does not exist on switch $switch_name\n" if not $port_id =~ m/^\d+$/; |
---|
[213] | 2897 | |
---|
[277] | 2898 | my $oid_search_portstatus = $OID_NUMBER{'portUpDown'} .'.'. $port_id; |
---|
| 2899 | print "Info: switch $switch_name port $port_hr ($port_id) SNMP OID $oid_search_portstatus\n" if $verbose; |
---|
[213] | 2900 | |
---|
[206] | 2901 | my $result = $session->get_request( |
---|
[277] | 2902 | -varbindlist => [$oid_search_portstatus] |
---|
[206] | 2903 | ); |
---|
[216] | 2904 | print $session->error()."\n" if $session->error_status(); |
---|
[206] | 2905 | if (defined $result) { |
---|
[277] | 2906 | print "$PORT_UPDOWN{$result->{$oid_search_portstatus}}\n"; |
---|
[206] | 2907 | } |
---|
| 2908 | |
---|
[216] | 2909 | $session->close; |
---|
| 2910 | |
---|
[206] | 2911 | #system "snmpget -v 1 -c public $switch_name 1.3.6.1.2.1.2.2.1.7.$port"; |
---|
[63] | 2912 | return; |
---|
[2] | 2913 | } |
---|
| 2914 | |
---|
[218] | 2915 | #--------------------------------------------------------------- |
---|
[35] | 2916 | sub cmd_search_mac_on_switch { |
---|
[138] | 2917 | @ARGV = @_; |
---|
[63] | 2918 | |
---|
[138] | 2919 | my $verbose; |
---|
[144] | 2920 | my $vlan_id = 0; |
---|
[138] | 2921 | |
---|
| 2922 | GetOptions( |
---|
| 2923 | 'verbose|v' => \$verbose, |
---|
[144] | 2924 | 'vlan|l=i' => \$vlan_id, |
---|
[138] | 2925 | ); |
---|
| 2926 | |
---|
| 2927 | my $switch_name = shift @ARGV || q{}; |
---|
| 2928 | my $mac_address = shift @ARGV || q{}; |
---|
| 2929 | |
---|
[63] | 2930 | if ($switch_name eq q{} or $mac_address eq q{}) { |
---|
[39] | 2931 | die "Usage: klask search-mac-on-switch SWITCH_NAME MAC_ADDRESS\n"; |
---|
[38] | 2932 | } |
---|
[39] | 2933 | |
---|
[138] | 2934 | $mac_address = normalize_mac_address($mac_address); |
---|
[261] | 2935 | $switch_name = join(',', map {$_->{'hostname'}} @SWITCH_LIST ) if $switch_name eq q{*} or $switch_name eq q{all}; |
---|
[39] | 2936 | |
---|
[112] | 2937 | for my $sw_name (split /,/, $switch_name) { |
---|
| 2938 | if (not defined $SWITCH_DB{$sw_name}) { |
---|
| 2939 | die "Switch $sw_name must be defined in klask configuration file\n"; |
---|
| 2940 | } |
---|
[39] | 2941 | |
---|
[277] | 2942 | my $oid_search_port1 = $OID_NUMBER{'searchPort1'} . mac_address_hex2dec($mac_address); |
---|
| 2943 | my $oid_search_port2 = $OID_NUMBER{'searchPort2'} .'.'. $vlan_id . mac_address_hex2dec($mac_address); |
---|
| 2944 | print "Klask search OID $oid_search_port1 on switch $sw_name\n" if $verbose; |
---|
| 2945 | print "Klask search OID $oid_search_port2 on switch $sw_name\n" if $verbose; |
---|
[35] | 2946 | |
---|
[209] | 2947 | my $sw = $SWITCH_DB{$sw_name}; |
---|
[221] | 2948 | my ($session, $error) = Net::SNMP->session( %{$sw->{'snmp_param_session'}} ); |
---|
[112] | 2949 | print "$error \n" if $error; |
---|
[63] | 2950 | |
---|
[112] | 2951 | my $result = $session->get_request( |
---|
[277] | 2952 | -varbindlist => [$oid_search_port1] |
---|
[112] | 2953 | ); |
---|
[124] | 2954 | if (not defined $result) { |
---|
| 2955 | $result = $session->get_request( |
---|
[277] | 2956 | -varbindlist => [$oid_search_port2] |
---|
[124] | 2957 | ); |
---|
[277] | 2958 | $result->{$oid_search_port1} = $result->{$oid_search_port2} if defined $result; |
---|
[124] | 2959 | } |
---|
[112] | 2960 | |
---|
[277] | 2961 | if (defined $result and $result->{$oid_search_port1} ne 'noSuchInstance') { |
---|
| 2962 | my $swport_id = $result->{$oid_search_port1}; |
---|
[271] | 2963 | my $swport_hr = snmp_get_switchport_id2hr($session, $swport_id); |
---|
[181] | 2964 | print "Klask find MAC $mac_address on switch $sw_name port $swport_hr\n"; |
---|
[123] | 2965 | } |
---|
| 2966 | else { |
---|
[138] | 2967 | print "Klask do not find MAC $mac_address on switch $sw_name\n" if $verbose; |
---|
[112] | 2968 | } |
---|
| 2969 | |
---|
[35] | 2970 | $session->close; |
---|
| 2971 | } |
---|
[63] | 2972 | return; |
---|
[35] | 2973 | } |
---|
| 2974 | |
---|
[218] | 2975 | #--------------------------------------------------------------- |
---|
[298] | 2976 | sub cmd_updatesw { |
---|
| 2977 | @ARGV = @_; |
---|
| 2978 | |
---|
| 2979 | my $verbose; |
---|
| 2980 | |
---|
| 2981 | GetOptions( |
---|
| 2982 | 'verbose|v' => \$verbose, |
---|
| 2983 | ); |
---|
| 2984 | |
---|
| 2985 | update_switchdb(verbose => $verbose); |
---|
| 2986 | } |
---|
| 2987 | |
---|
| 2988 | #--------------------------------------------------------------- |
---|
[4] | 2989 | sub cmd_exportsw { |
---|
[113] | 2990 | @ARGV = @_; |
---|
[2] | 2991 | |
---|
[34] | 2992 | test_switchdb_environnement(); |
---|
| 2993 | |
---|
[4] | 2994 | my $format = 'txt'; |
---|
[289] | 2995 | my $graph_modulo = 0; |
---|
| 2996 | my $graph_shift = 1; |
---|
[4] | 2997 | |
---|
[138] | 2998 | GetOptions( |
---|
[4] | 2999 | 'format|f=s' => \$format, |
---|
[289] | 3000 | 'modulo|m=i' => \$graph_modulo, |
---|
| 3001 | 'shift|s=i' => \$graph_shift, |
---|
[4] | 3002 | ); |
---|
| 3003 | |
---|
| 3004 | my %possible_format = ( |
---|
| 3005 | txt => \&cmd_exportsw_txt, |
---|
| 3006 | dot => \&cmd_exportsw_dot, |
---|
| 3007 | ); |
---|
| 3008 | |
---|
| 3009 | $format = 'txt' if not defined $possible_format{$format}; |
---|
[63] | 3010 | |
---|
[289] | 3011 | $possible_format{$format}->($graph_modulo, $graph_shift, @ARGV); |
---|
[63] | 3012 | return; |
---|
[4] | 3013 | } |
---|
| 3014 | |
---|
[218] | 3015 | #--------------------------------------------------------------- |
---|
[4] | 3016 | sub cmd_exportsw_txt { |
---|
[313] | 3017 | my %args = ( |
---|
| 3018 | way => 'all', |
---|
| 3019 | list => 0, |
---|
| 3020 | @_); |
---|
| 3021 | |
---|
[44] | 3022 | my $switch_connection = YAML::Syck::LoadFile("$KLASK_SW_FILE"); |
---|
[4] | 3023 | |
---|
[261] | 3024 | my %db_switch_output_port = %{$switch_connection->{'output_port'}}; |
---|
| 3025 | my %db_switch_parent = %{$switch_connection->{'parent'}}; |
---|
| 3026 | my %db_switch_connected_on_port = %{$switch_connection->{'connected_on_port'}}; |
---|
[4] | 3027 | |
---|
[312] | 3028 | # Switch output port and parent port connection |
---|
[311] | 3029 | my $tb_child = Text::Table->new( # http://www.perlmonks.org/?node_id=988320 |
---|
[323] | 3030 | {align => 'left', align_title => 'left', title => 'Child-Switch'}, |
---|
| 3031 | {align => 'right', align_title => 'right', title => 'Output-Port'}, |
---|
[311] | 3032 | {align => 'center', align_title => 'center', title => 'Link'}, |
---|
[323] | 3033 | {align => 'left', align_title => 'left', title => 'Input-Port'}, |
---|
| 3034 | {align => 'left', align_title => 'left', title => 'Parent-Switch'}, |
---|
[311] | 3035 | ); |
---|
[4] | 3036 | for my $sw (sort keys %db_switch_output_port) { |
---|
[311] | 3037 | my $arrow ='--->'; |
---|
| 3038 | $arrow ='===>' if $db_switch_output_port{$sw} =~ m/^(Trk|Br|Po)/; |
---|
[4] | 3039 | if (exists $db_switch_parent{$sw}) { |
---|
[311] | 3040 | $tb_child->add($sw, $db_switch_output_port{$sw}, $arrow, $db_switch_parent{$sw}->{'port_hr'}, $db_switch_parent{$sw}->{'switch'}); |
---|
| 3041 | |
---|
[4] | 3042 | } |
---|
| 3043 | else { |
---|
[311] | 3044 | $tb_child->add($sw, $db_switch_output_port{$sw}, $arrow, '', 'router'); |
---|
[4] | 3045 | } |
---|
| 3046 | } |
---|
[311] | 3047 | my @colrange = map { scalar $tb_child->colrange($_) } (0 .. 4); # force scaler context |
---|
[312] | 3048 | $tb_child->add(map { ' ' x $_ } reverse @colrange); # add empty line to force symetric table output |
---|
[311] | 3049 | print $tb_child->title(); |
---|
| 3050 | print $tb_child->rule('-'); |
---|
| 3051 | print $tb_child->body(0, $tb_child->body_height()-1); # remove last fake line |
---|
| 3052 | $tb_child->clear; |
---|
| 3053 | |
---|
[312] | 3054 | # Switch parent and children port inter-connection |
---|
[4] | 3055 | print "\n"; |
---|
[311] | 3056 | my $tb_parent = Text::Table->new( # http://www.perlmonks.org/?node_id=988320 |
---|
[323] | 3057 | {align => 'left', align_title => 'left', title => 'Parent-Switch'}, |
---|
| 3058 | {align => 'right', align_title => 'right', title => 'Input-Port'}, |
---|
[311] | 3059 | {align => 'center', align_title => 'center', title => 'Link'}, |
---|
[323] | 3060 | {align => 'left', align_title => 'left', title => 'Output-Port'}, |
---|
| 3061 | {align => 'left', align_title => 'left', title => 'Child-Switch'}, |
---|
[311] | 3062 | ); |
---|
[63] | 3063 | for my $swport (sort keys %db_switch_connected_on_port) { |
---|
[248] | 3064 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
[4] | 3065 | for my $sw (keys %{$db_switch_connected_on_port{$swport}}) { |
---|
[312] | 3066 | my $arrow ='<---'; |
---|
| 3067 | $arrow ='<===' if $port_connect =~ m/^(Trk|Br|Po)/; |
---|
[4] | 3068 | if (exists $db_switch_output_port{$sw}) { |
---|
[311] | 3069 | $tb_parent->add($sw_connect, $port_connect, $arrow, $db_switch_output_port{$sw}, $sw); |
---|
[4] | 3070 | } |
---|
| 3071 | else { |
---|
[311] | 3072 | $tb_parent->add($sw_connect, $port_connect, $arrow, '', $sw); |
---|
[4] | 3073 | } |
---|
| 3074 | } |
---|
| 3075 | } |
---|
[311] | 3076 | @colrange = map { scalar $tb_parent->colrange($_) } (0 .. 4); # force scaler context |
---|
[312] | 3077 | $tb_parent->add(map { ' ' x $_ } reverse @colrange); # add empty line to force symetric table output |
---|
[311] | 3078 | print $tb_parent->title(); |
---|
| 3079 | print $tb_parent->rule('-'); |
---|
| 3080 | print $tb_parent->body(0, $tb_parent->body_height()-1); # remove last fake line |
---|
| 3081 | $tb_parent->clear; |
---|
| 3082 | |
---|
[63] | 3083 | return; |
---|
[4] | 3084 | } |
---|
| 3085 | |
---|
[218] | 3086 | #--------------------------------------------------------------- |
---|
[4] | 3087 | sub cmd_exportsw_dot { |
---|
[289] | 3088 | my $graph_modulo = shift; |
---|
| 3089 | my $graph_shift = shift; |
---|
[4] | 3090 | |
---|
[44] | 3091 | my $switch_connection = YAML::Syck::LoadFile("$KLASK_SW_FILE"); |
---|
[63] | 3092 | |
---|
[261] | 3093 | my %db_switch_output_port = %{$switch_connection->{'output_port'}}; |
---|
| 3094 | my %db_switch_parent = %{$switch_connection->{'parent'}}; |
---|
| 3095 | my %db_switch_connected_on_port = %{$switch_connection->{'connected_on_port'}}; |
---|
| 3096 | my %db_switch_link_with = %{$switch_connection->{'link_with'}}; |
---|
| 3097 | my %db_switch_global = %{$switch_connection->{'switch_db'}}; |
---|
| 3098 | my $timestamp = $switch_connection->{'timestamp'}; |
---|
[25] | 3099 | |
---|
[281] | 3100 | my $invisible_node = 0; # Count number of invisible node |
---|
| 3101 | |
---|
[2] | 3102 | my %db_building= (); |
---|
[281] | 3103 | my %db_switch_line = (); # Number of line drawed on a switch |
---|
[294] | 3104 | for my $sw (values %db_switch_global) { |
---|
[261] | 3105 | my ($building, $location) = split m/ \/ /xms, $sw->{'location'}, 2; |
---|
[2] | 3106 | $db_building{$building} ||= {}; |
---|
| 3107 | $db_building{$building}->{$location} ||= {}; |
---|
[261] | 3108 | $db_building{$building}->{$location}{ $sw->{'hostname'} } = 'y'; |
---|
[290] | 3109 | |
---|
[281] | 3110 | $db_switch_line{$sw} = 0; |
---|
[2] | 3111 | } |
---|
[63] | 3112 | |
---|
| 3113 | |
---|
[2] | 3114 | print "digraph G {\n"; |
---|
[285] | 3115 | print "rankdir=LR;\n"; |
---|
[203] | 3116 | #print "splines=polyline;\n"; |
---|
[2] | 3117 | |
---|
[282] | 3118 | print "site [label=\"site\", color=black, fillcolor=gold, shape=invhouse, style=filled];\n"; |
---|
| 3119 | print "internet [label=\"internet\", color=black, fillcolor=cyan, shape=house, style=filled];\n"; |
---|
[2] | 3120 | |
---|
[260] | 3121 | my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime $timestamp; |
---|
[202] | 3122 | $year += 1900; |
---|
| 3123 | $mon++; |
---|
| 3124 | my $date = sprintf '%04i-%02i-%02i %02i:%02i', $year, $mon, $mday, $hour, $min; |
---|
[288] | 3125 | print "\"$date\" [label=\"MAP DATE\\n\\n$date\", color=white, fillcolor=black, shape=polygon, sides=14, style=filled, fontcolor=white];\n"; |
---|
[286] | 3126 | print "site -> \"$date\" [style=invis];\n"; |
---|
[201] | 3127 | |
---|
[2] | 3128 | my $b=0; |
---|
| 3129 | for my $building (keys %db_building) { |
---|
| 3130 | $b++; |
---|
[63] | 3131 | |
---|
[282] | 3132 | print "\"building$b\" [label=\"$building\", color=black, fillcolor=gold, style=filled];\n"; |
---|
| 3133 | print "site -> \"building$b\" [len=2, color=firebrick];\n"; |
---|
[2] | 3134 | |
---|
| 3135 | my $l = 0; |
---|
| 3136 | for my $loc (keys %{$db_building{$building}}) { |
---|
| 3137 | $l++; |
---|
[63] | 3138 | |
---|
[282] | 3139 | print "\"location$b-$l\" [label=\"$building" . q{/} . join(q{\n}, split(m{ / }xms, $loc)) . "\", color=black, fillcolor=orange, style=filled];\n"; |
---|
| 3140 | # print "\"location$b-$l\" [label=\"$building / $loc\", color=black, fillcolor=orange, style=filled];\n"; |
---|
[291] | 3141 | print "\"building$b\" -> \"location$b-$l\" [len=2, color=firebrick];\n"; |
---|
[2] | 3142 | |
---|
| 3143 | for my $sw (keys %{$db_building{$building}->{$loc}}) { |
---|
| 3144 | |
---|
[254] | 3145 | my $peripheries = 1; |
---|
[284] | 3146 | my $color = 'lightblue'; |
---|
[279] | 3147 | if ($db_switch_output_port{$sw} =~ m/^(Trk|Br|Po)/) { |
---|
| 3148 | $peripheries = 2; |
---|
[284] | 3149 | $color = "\"$color:$color\""; |
---|
[279] | 3150 | } |
---|
[282] | 3151 | print "\"$sw:$db_switch_output_port{$sw}\" [label=\"".format_aggregator4dot($db_switch_output_port{$sw})."\", color=black, fillcolor=lightblue, peripheries=$peripheries, style=filled];\n"; |
---|
[2] | 3152 | |
---|
[25] | 3153 | my $swname = $sw; |
---|
[309] | 3154 | $swname .= q{\n-\n} . "$db_switch_global{$sw}->{'model'}" if exists $db_switch_global{$sw} and exists $db_switch_global{$sw}->{'model'}; |
---|
[282] | 3155 | print "\"$sw\" [label=\"$swname\", color=black, fillcolor=palegreen, shape=rect, style=filled];\n"; |
---|
| 3156 | print "\"location$b-$l\" -> \"$sw\" [len=2, color=firebrick, arrowtail=dot];\n"; |
---|
| 3157 | print "\"$sw\" -> \"$sw:$db_switch_output_port{$sw}\" [len=2, style=bold, color=$color, arrowhead=normal, arrowtail=invdot];\n"; |
---|
[2] | 3158 | |
---|
| 3159 | |
---|
| 3160 | for my $swport (keys %db_switch_connected_on_port) { |
---|
[248] | 3161 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
[2] | 3162 | next if not $sw_connect eq $sw; |
---|
| 3163 | next if $port_connect eq $db_switch_output_port{$sw}; |
---|
[254] | 3164 | my $peripheries = 1; |
---|
[284] | 3165 | my $color = 'plum'; |
---|
[280] | 3166 | if ($port_connect =~ m/^(Trk|Br|Po)/) { |
---|
| 3167 | $peripheries = 2; |
---|
[284] | 3168 | $color = "\"$color:$color\""; |
---|
[280] | 3169 | } |
---|
[282] | 3170 | print "\"$sw:$port_connect\" [label=\"".format_aggregator4dot($port_connect)."\", color=black, fillcolor=plum, peripheries=$peripheries, style=filled];\n"; |
---|
| 3171 | print "\"$sw:$port_connect\" -> \"$sw\" [len=2, style=bold, color=$color, arrowhead=normal, arrowtail=inv];\n"; |
---|
[290] | 3172 | |
---|
[283] | 3173 | #$db_switch_line{$sw}++; |
---|
[282] | 3174 | #if ($db_switch_line{$sw} % 9 == 0) { |
---|
| 3175 | # # Create invisible node |
---|
| 3176 | # $invisible_node++; |
---|
| 3177 | # my $invisible = '__Invisible_' . $invisible_node; |
---|
| 3178 | # print "$invisible [shape=none, label=\"\"]\n"; |
---|
| 3179 | # print "\"$sw:$port_connect\" -> $invisible [style=invis]\n"; |
---|
| 3180 | # print "$invisible -> \"$sw\" [style=invis]\n"; |
---|
| 3181 | # } |
---|
[2] | 3182 | } |
---|
| 3183 | } |
---|
| 3184 | } |
---|
| 3185 | } |
---|
| 3186 | |
---|
[63] | 3187 | # print "Switch output port and parent port connection\n"; |
---|
[2] | 3188 | # print "---------------------------------------------\n"; |
---|
| 3189 | for my $sw (sort keys %db_switch_output_port) { |
---|
| 3190 | if (exists $db_switch_parent{$sw}) { |
---|
[272] | 3191 | # printf " \"%s:%s\" -> \"%s:%s\"\n", $sw, $db_switch_output_port{$sw}, $db_switch_parent{$sw}->{'switch'}, $db_switch_parent{$sw}->{'port_id'}; |
---|
[2] | 3192 | } |
---|
| 3193 | else { |
---|
[255] | 3194 | my $style = 'solid'; |
---|
[284] | 3195 | my $color = 'black'; # navyblue |
---|
[278] | 3196 | if ($db_switch_output_port{$sw} =~ m/^(Trk|Br|Po)/) { |
---|
| 3197 | $style = 'bold'; |
---|
| 3198 | $color = "\"$color:invis:$color\""; |
---|
| 3199 | } |
---|
[282] | 3200 | printf " \"%s:%s\" -> internet [style=$style, color=$color];\n", $sw, $db_switch_output_port{$sw}; |
---|
[2] | 3201 | } |
---|
| 3202 | } |
---|
| 3203 | print "\n"; |
---|
| 3204 | |
---|
[306] | 3205 | # shift graph between 1 or 2 when $graph_shift = 3 |
---|
| 3206 | my $graph_breaker = 1; |
---|
| 3207 | |
---|
[2] | 3208 | # print "Switch parent and children port inter-connection\n"; |
---|
| 3209 | # print "------------------------------------------------\n"; |
---|
[63] | 3210 | for my $swport (sort keys %db_switch_connected_on_port) { |
---|
[248] | 3211 | my ($sw_connect, $port_connect) = split m/ $SEP_SWITCH_PORT /xms, $swport, 2; |
---|
[2] | 3212 | for my $sw (keys %{$db_switch_connected_on_port{$swport}}) { |
---|
[254] | 3213 | my $style = 'solid'; |
---|
[284] | 3214 | my $color = 'black'; # navyblue |
---|
[278] | 3215 | if ($port_connect =~ m/^(Trk|Br|Po)/) { |
---|
| 3216 | $style = 'bold'; |
---|
| 3217 | $color = "\"$color:invis:$color\""; |
---|
| 3218 | } |
---|
[2] | 3219 | if (exists $db_switch_output_port{$sw}) { |
---|
[282] | 3220 | printf " \"%s:%s\" -> \"%s:%s\" [style=$style, color=$color];\n", $sw, $db_switch_output_port{$sw}, $sw_connect, $port_connect; |
---|
| 3221 | |
---|
[289] | 3222 | next if $graph_modulo == 0; # No shift (invisible nodes) in graph |
---|
[283] | 3223 | $db_switch_line{$sw_connect}++; |
---|
[289] | 3224 | if ($db_switch_line{$sw_connect} % $graph_modulo == 0) { |
---|
[282] | 3225 | # Create invisible node |
---|
| 3226 | $invisible_node++; |
---|
| 3227 | my $invisible = '__Invisible_' . $invisible_node; |
---|
[289] | 3228 | print " \"$invisible.a\" [shape=none, label=\"\"];\n"; |
---|
| 3229 | printf " \"%s:%s\" -> \"$invisible.a\" [style=invis];\n", $sw, $db_switch_output_port{$sw}; |
---|
[306] | 3230 | $graph_breaker++; |
---|
| 3231 | if ($graph_shift == 2 or ($graph_shift == 3 and ($graph_breaker % 2) == 0)) { |
---|
[289] | 3232 | # Two invisible node |
---|
| 3233 | print " \"$invisible.b\" [shape=none, label=\"\"];\n"; |
---|
| 3234 | print " \"$invisible.a\" -> \"$invisible.b\" [style=invis];\n"; |
---|
| 3235 | printf " \"$invisible.b\" -> \"%s:%s\" [style=invis];\n", $sw_connect, $port_connect; |
---|
| 3236 | } |
---|
| 3237 | else { |
---|
| 3238 | # One invisible node |
---|
| 3239 | printf " \"$invisible.a\" -> \"%s:%s\" [style=invis];\n", $sw_connect, $port_connect; |
---|
| 3240 | } |
---|
[282] | 3241 | } |
---|
[2] | 3242 | } |
---|
| 3243 | else { |
---|
[282] | 3244 | printf " \"%s\" -> \"%s:%s\" [style=$style];\n", $sw, $sw_connect, $port_connect; |
---|
[2] | 3245 | } |
---|
| 3246 | } |
---|
| 3247 | } |
---|
| 3248 | |
---|
| 3249 | print "}\n"; |
---|
[63] | 3250 | return; |
---|
[2] | 3251 | } |
---|
| 3252 | |
---|
| 3253 | |
---|
[218] | 3254 | ################################################################ |
---|
| 3255 | # documentation |
---|
| 3256 | ################################################################ |
---|
| 3257 | |
---|
[2] | 3258 | __END__ |
---|
| 3259 | |
---|
| 3260 | =head1 NAME |
---|
| 3261 | |
---|
[219] | 3262 | klask - port and search manager for switches, map management |
---|
[2] | 3263 | |
---|
| 3264 | |
---|
[63] | 3265 | =head1 USAGE |
---|
[2] | 3266 | |
---|
[226] | 3267 | klask version |
---|
| 3268 | klask help |
---|
| 3269 | |
---|
[301] | 3270 | klask updatedb [--verbose|-v] [--verb-description|-d] [--chk-hostname|-h] [--chk-location|-l] [--no-rebuildsw|-R] |
---|
[226] | 3271 | klask exportdb [--format|-f txt|html] |
---|
[223] | 3272 | klask removedb IP* computer* |
---|
[219] | 3273 | klask cleandb [--verbose|-v] --day number_of_day --repair-dns |
---|
[2] | 3274 | |
---|
[219] | 3275 | klask updatesw [--verbose|-v] |
---|
[307] | 3276 | klask exportsw [--format|-f txt|dot] [--modulo|-m XX] [--shift|-s YY] |
---|
[5] | 3277 | |
---|
[226] | 3278 | klask searchdb [--kind|-k host|mac] computer [mac-address] |
---|
[2] | 3279 | klask search computer |
---|
[219] | 3280 | klask search-mac-on-switch [--verbose|-v] [--vlan|-i vlan-id] switch mac_addr |
---|
[2] | 3281 | |
---|
[226] | 3282 | klask ip-free [--verbose|-v] [--day|-d days-to-death] [--format|-f txt|html] [vlan_name] |
---|
[69] | 3283 | |
---|
[330] | 3284 | klask bad-vlan-id [--day|-d days_before_alert] [--format|-f txt|html] |
---|
[224] | 3285 | |
---|
[219] | 3286 | klask enable [--verbose|-v] switch port |
---|
| 3287 | klask disable [--verbose|-v] switch port |
---|
| 3288 | klask status [--verbose|-v] switch port |
---|
[2] | 3289 | |
---|
[247] | 3290 | klask poe-enable [--verbose|-v] switch port |
---|
| 3291 | klask poe-disable [--verbose|-v] switch port |
---|
| 3292 | klask poe-status [--verbose|-v] switch port |
---|
| 3293 | |
---|
[238] | 3294 | klask vlan-getname switch vlan-id |
---|
| 3295 | klask vlan-list switch |
---|
[2] | 3296 | |
---|
[237] | 3297 | |
---|
[2] | 3298 | =head1 DESCRIPTION |
---|
| 3299 | |
---|
[246] | 3300 | Klask is a small tool to find where is connected a host in a big network |
---|
| 3301 | and on which VLAN. |
---|
[212] | 3302 | Klask mean search in brittany. |
---|
[200] | 3303 | No hight level protocol like CDL, LLDP are use. |
---|
| 3304 | Everything is just done with SNMP request on MAC address. |
---|
[2] | 3305 | |
---|
[212] | 3306 | Limitation : loop cannot be detected and could be problematic when the map is created (C<updatesw> method). |
---|
[200] | 3307 | If you use PVST or MSTP and create loop between VLAN, |
---|
[212] | 3308 | you have to use C<portignore> functionality on switch port to cut manually loop |
---|
[200] | 3309 | (see config file below). |
---|
| 3310 | |
---|
[212] | 3311 | When you use a management port to administrate a switch, |
---|
| 3312 | it's not possible to create the map with this switch because it does not have a MAC address, |
---|
| 3313 | so other switch cannot find the real downlink port... |
---|
| 3314 | One way to work around this problem is, if you have a computer directly connected on the switch, |
---|
| 3315 | to put this IP as the fake ip for the switch. |
---|
[200] | 3316 | The MAC address associated will be use just for the map detection. |
---|
[212] | 3317 | The C<fake-ip> parameter is defined in the config file. |
---|
[200] | 3318 | |
---|
[219] | 3319 | Klask has now a web site dedicated for it: L<http://servforge.legi.grenoble-inp.fr/projects/klask>! |
---|
[2] | 3320 | |
---|
[6] | 3321 | |
---|
[2] | 3322 | =head1 COMMANDS |
---|
| 3323 | |
---|
[225] | 3324 | Some command are defined in the source code but are not documented here. |
---|
| 3325 | Theses could be not well defined, not finished, not well tested... |
---|
| 3326 | You can read the source code and use them at your own risk |
---|
| 3327 | (like for all the Klask code). |
---|
[2] | 3328 | |
---|
| 3329 | =head2 search |
---|
| 3330 | |
---|
[226] | 3331 | klask search computer |
---|
| 3332 | |
---|
[200] | 3333 | This command takes one or more computer in argument. |
---|
| 3334 | It search a computer on the network and give the port and the switch on which the computer is connected. |
---|
[2] | 3335 | |
---|
[227] | 3336 | =head2 search-mac-on-switch |
---|
[2] | 3337 | |
---|
[226] | 3338 | klask search-mac-on-switch [--verbose|-v] [--vlan|-i vlan-id] switch mac_addr |
---|
| 3339 | |
---|
| 3340 | This command search a MAC address on a switch. |
---|
[229] | 3341 | To search on all switch, you could put C<'*'> or C<all>. |
---|
| 3342 | The VLAN parameter could help. |
---|
[226] | 3343 | |
---|
| 3344 | |
---|
[2] | 3345 | =head2 enable |
---|
| 3346 | |
---|
[223] | 3347 | klask enable [--verbose|-v] switch port |
---|
[219] | 3348 | |
---|
[227] | 3349 | This command activate a port (or an agrregate bridge port) on a switch by SNMP. |
---|
[219] | 3350 | So you need to give the switch name and a port on the command line. |
---|
[225] | 3351 | See L</ABBREVIATION FOR PORT>. |
---|
[2] | 3352 | |
---|
[227] | 3353 | Warning: You need to have the SNMP write access on the switch in order to modify it's configuration. |
---|
[2] | 3354 | |
---|
[219] | 3355 | |
---|
[2] | 3356 | =head2 disable |
---|
| 3357 | |
---|
[219] | 3358 | klask disable [--verbose|-v] switch port |
---|
| 3359 | |
---|
[227] | 3360 | This command deactivate a port (or an agrregate bridge port) on a switch by SNMP. |
---|
[219] | 3361 | So you need to give the switch name and a port on the command line. |
---|
[225] | 3362 | See L</ABBREVIATION FOR PORT>. |
---|
[2] | 3363 | |
---|
[227] | 3364 | Warning: You need to have the SNMP write access on the switch in order to modify it's configuration. |
---|
[2] | 3365 | |
---|
[219] | 3366 | |
---|
[2] | 3367 | =head2 status |
---|
| 3368 | |
---|
[223] | 3369 | klask status [--verbose|-v] switch port |
---|
[219] | 3370 | |
---|
[200] | 3371 | This command return the status of a port number on a switch by SNMP. |
---|
[219] | 3372 | The return value could be C<enable> or C<disable> word. |
---|
| 3373 | So you need to give the switch name and a port on the command line. |
---|
[225] | 3374 | See L</ABBREVIATION FOR PORT>. |
---|
[2] | 3375 | |
---|
[227] | 3376 | If it's not possible to change port status with command L</enable> and L</disable> |
---|
| 3377 | (SNMP community read write access), |
---|
| 3378 | it's always possible to have the port status even for bridge agrregate port. |
---|
[219] | 3379 | |
---|
[227] | 3380 | |
---|
[2] | 3381 | =head2 updatedb |
---|
| 3382 | |
---|
[301] | 3383 | klask updatedb [--verbose|-v] [--verb-description|-d] [--chk-hostname|-h] [--chk-location|-l] [--no-rebuildsw|-R] |
---|
[223] | 3384 | |
---|
[226] | 3385 | This command will scan networks and update the computer database. |
---|
| 3386 | To know which are the cmputer scanned, you have to configure the file F</etc/klask/klask.conf>. |
---|
| 3387 | This file is easy to read and write because Klask use YAML format and not XML |
---|
| 3388 | (see L</CONFIGURATION>). |
---|
[2] | 3389 | |
---|
[226] | 3390 | Option are not stable and could be use manually when you have a new kind of switch. |
---|
[223] | 3391 | Maybe some option will be transfered in a future C<checksw> command! |
---|
[2] | 3392 | |
---|
[227] | 3393 | The network parameter C<scan-mode> can have two values: C<active> or C<passive>. |
---|
| 3394 | By default, a network is C<active>. |
---|
| 3395 | This means that an C<fping> command is done at the beginning on all the IP of the network |
---|
| 3396 | and the computers that was not detected in this pass, but where their Klask entry is less than one week, |
---|
[290] | 3397 | will have an C<arping> |
---|
[227] | 3398 | (some OS do not respond to C<ping> but a computer have to respond to C<arping> if it want to interact with other). |
---|
| 3399 | In the scan mode C<passive>, no C<fping> and no C<arping> are done. |
---|
| 3400 | It's good for big subnet with few computer (telephone...). |
---|
| 3401 | The idea of the C<active> scan mode is to force computer to regulary send packet over the network. |
---|
| 3402 | |
---|
[301] | 3403 | At the beginning, the command verify that the switch map checksum is always valid. |
---|
| 3404 | Otherwise, a rebuild procedure will ne done automatically. |
---|
| 3405 | |
---|
[223] | 3406 | =head2 exportdb |
---|
[2] | 3407 | |
---|
[226] | 3408 | klask exportdb [--format|-f txt|html] |
---|
[223] | 3409 | |
---|
[226] | 3410 | This command print the content of the computer database. |
---|
| 3411 | There is actually only two format : TXT and HTML. |
---|
| 3412 | By default, format is TXT. |
---|
[200] | 3413 | It's very easy to have more format, it's just need times... |
---|
[2] | 3414 | |
---|
[190] | 3415 | =head2 removedb |
---|
[2] | 3416 | |
---|
[223] | 3417 | klask removedb IP* computer* |
---|
| 3418 | |
---|
[190] | 3419 | This command remove an entry in the database. |
---|
| 3420 | There is only one kind of parameter, the IP of the computers to be removed. |
---|
| 3421 | You can put as many IP as you want... |
---|
| 3422 | |
---|
[226] | 3423 | Computer DNS names are also a valid entry because a DNS resolver is executed at the beginning. |
---|
[190] | 3424 | |
---|
| 3425 | =head2 cleandb |
---|
| 3426 | |
---|
[223] | 3427 | klask cleandb [--verbose|-v] --day number_of_day --repair-dns |
---|
[190] | 3428 | |
---|
[223] | 3429 | Remove double entry (same MAC-Address) in the computer database when the older one is older than X day (C<--day>) the new one. |
---|
| 3430 | Computer name beginning by 'float' (regex C<^float>) are not really taken into account but could be remove. |
---|
| 3431 | This could be configure with the global regex parameter C<float-regex> in the configuration file F</etc/klask/klask.conf>. |
---|
| 3432 | This functionality could be use when computer define in VLAN 1 |
---|
| 3433 | could have a float IP when they are connected on VLAN 2. |
---|
| 3434 | In the Klask database, the float DNS entries are less important. |
---|
[190] | 3435 | |
---|
[226] | 3436 | When reverse DNS has not been done by the past, option C<--repair-dns> force a reverse DNS check on all unkown host. |
---|
[223] | 3437 | |
---|
[5] | 3438 | =head2 updatesw |
---|
| 3439 | |
---|
[224] | 3440 | klask updatesw [--verbose|-v] |
---|
| 3441 | |
---|
[200] | 3442 | This command build a map of your manageable switch on your network. |
---|
[226] | 3443 | The list of the switches must be given in the file F</etc/klask/klask.conf> (see L</CONFIGURATION>). |
---|
[5] | 3444 | |
---|
[301] | 3445 | The database has a checksum which depend of all the active switches. |
---|
| 3446 | It's use when rebuilding the database in case of change in switch configuration (one more for example). |
---|
[5] | 3447 | |
---|
[224] | 3448 | =head2 exportsw |
---|
[5] | 3449 | |
---|
[307] | 3450 | klask exportsw [--format|-f txt|dot] [--modulo|-m XX] [--shift|-s YY] |
---|
[224] | 3451 | |
---|
[200] | 3452 | This command print the content of the switch database. There is actually two format. |
---|
[226] | 3453 | One is just TXT for terminal and the other is the DOT format from the graphviz environnement. |
---|
| 3454 | By default, format is TXT. |
---|
[5] | 3455 | |
---|
| 3456 | klask exportsw --format dot > /tmp/map.dot |
---|
| 3457 | dot -Tpng /tmp/map.dot > /tmp/map.png |
---|
| 3458 | |
---|
[307] | 3459 | In case you have too many switch connected on one switch, |
---|
| 3460 | the graphviz result graph could be too much vertical. |
---|
| 3461 | With C<--modulo> > 0, you can specify how many switches (connected on one switch) are on the same columns |
---|
| 3462 | before shifting them to one column to the left and back again. |
---|
| 3463 | The C<--shift> parameter must be 1, 2 or 3. |
---|
| 3464 | With C<--shift> egual to 2, the shift will be to two column to the left. |
---|
| 3465 | With 3, it will be 1 to the left and 2 to the left one time over two ! |
---|
| 3466 | In practise, we just add virtuals nodes in the dot file, |
---|
| 3467 | that means the result graph is generated with theses virtuals but invisibles nodes... |
---|
[5] | 3468 | |
---|
[224] | 3469 | =head2 ip-free |
---|
| 3470 | |
---|
[226] | 3471 | klask ip-free [--verbose|-v] [--day|-d days-to-death] [--format|-f txt|html] [vlan_name] |
---|
[224] | 3472 | |
---|
| 3473 | This command return IP address that was not use (detected by Klask) at this time. |
---|
| 3474 | The list returned could be limited to just one VLAN. |
---|
| 3475 | IP returned could have been never used or no computer have been detected since the number of days specified |
---|
| 3476 | (2 years by default). |
---|
[225] | 3477 | This parameter could also be define in the configuration file F</etc/klask/klask.conf> (see L</CONFIGURATION>). |
---|
[224] | 3478 | |
---|
| 3479 | default: |
---|
| 3480 | days-to-death: 730 |
---|
| 3481 | |
---|
| 3482 | Computer that does not have the good IP but takes a float one (see L</cleandb>) are taken into account. |
---|
| 3483 | |
---|
| 3484 | |
---|
| 3485 | =head2 bad-vlan-id |
---|
| 3486 | |
---|
[330] | 3487 | klask bad-vlan-id [--day|-d days_before_alert] [--format|-f txt|html] |
---|
[224] | 3488 | |
---|
| 3489 | This command return a list of switch port that are not configure with the good VLAN. |
---|
| 3490 | Computer which are in bad VLAN are detected with the float regex parameter (see L</cleandb>) |
---|
| 3491 | and another prior trace where they had the good IP (good DNS name). |
---|
| 3492 | The computer must stay connected on a bad VLAN more than XX days (15 days by default) before alert. |
---|
[225] | 3493 | This parameter could also define in the configuration file F</etc/klask/klask.conf> (see L</CONFIGURATION>). |
---|
[224] | 3494 | |
---|
| 3495 | default: |
---|
| 3496 | days-before-alert: 15 |
---|
| 3497 | |
---|
| 3498 | This functionality is not need if your switch use RADIUS 802.1X configuration... |
---|
| 3499 | |
---|
| 3500 | |
---|
[247] | 3501 | =head2 poe-enable |
---|
[224] | 3502 | |
---|
[247] | 3503 | klask poe-enable [--verbose|-v] switch port |
---|
| 3504 | |
---|
| 3505 | This command activate the PoE (Power over Ethernet) on a switch port by SNMP. |
---|
| 3506 | So you need to give the switch name and a port on the command line. |
---|
| 3507 | See L</ABBREVIATION FOR PORT>. |
---|
| 3508 | |
---|
| 3509 | Warning: Only NEXANS switches are supported (we do not have other switch for testing). |
---|
| 3510 | You need to have the SNMP write access on the switch in order to modify it's configuration. |
---|
| 3511 | |
---|
| 3512 | |
---|
| 3513 | =head2 poe-disable |
---|
| 3514 | |
---|
| 3515 | klask poe-disable [--verbose|-v] switch port |
---|
| 3516 | |
---|
| 3517 | This command deactivate the PoE (Power over Ethernet) on a switch port by SNMP. |
---|
| 3518 | So you need to give the switch name and a port on the command line. |
---|
| 3519 | See L</ABBREVIATION FOR PORT>. |
---|
| 3520 | |
---|
| 3521 | Warning: Only NEXANS switches are supported (we do not have other switch for testing). |
---|
| 3522 | You need to have the SNMP write access on the switch in order to modify it's configuration. |
---|
| 3523 | |
---|
| 3524 | |
---|
| 3525 | =head2 poe-status |
---|
| 3526 | |
---|
| 3527 | klask poe-status [--verbose|-v] switch port |
---|
| 3528 | |
---|
| 3529 | This command return the status of the PoE (Power over Ethernet) on a switch port by SNMP. |
---|
| 3530 | The return value could be C<enable> or C<disable> word. |
---|
| 3531 | So you need to give the switch name and a port on the command line. |
---|
| 3532 | See L</ABBREVIATION FOR PORT>. |
---|
| 3533 | |
---|
| 3534 | If it's not possible to change the PoE status with command L</poe-enable> and L</poe-disable> |
---|
| 3535 | (SNMP community read write access), |
---|
| 3536 | it's always possible to have the PoE port status. |
---|
| 3537 | |
---|
| 3538 | Warning: Only NEXANS switches are supported (we do not have other switch for testing). |
---|
| 3539 | |
---|
| 3540 | |
---|
[2] | 3541 | =head1 CONFIGURATION |
---|
| 3542 | |
---|
[219] | 3543 | Because Klask need many parameters, it's not possible actually to use command line parameters for everything. |
---|
[201] | 3544 | The configuration is done in a F</etc/klask/klask.conf> YAML file. |
---|
[200] | 3545 | This format have many advantage over XML, it's easier to read and to write ! |
---|
[2] | 3546 | |
---|
| 3547 | Here an example, be aware with indent, it's important in YAML, do not use tabulation ! |
---|
| 3548 | |
---|
| 3549 | default: |
---|
| 3550 | community: public |
---|
[220] | 3551 | community-rw: private |
---|
[2] | 3552 | snmpport: 161 |
---|
[223] | 3553 | float-regex: '(?^msx: ^float )' |
---|
[227] | 3554 | scan-mode: active |
---|
[2] | 3555 | |
---|
| 3556 | network: |
---|
[5] | 3557 | labnet: |
---|
| 3558 | ip-subnet: |
---|
| 3559 | - add: 192.168.1.0/24 |
---|
| 3560 | - add: 192.168.2.0/24 |
---|
| 3561 | interface: eth0 |
---|
[201] | 3562 | vlan-id: 12 |
---|
[5] | 3563 | main-router: gw1.labnet.local |
---|
[2] | 3564 | |
---|
[5] | 3565 | schoolnet: |
---|
| 3566 | ip-subnet: |
---|
[227] | 3567 | - add: 192.168.3.0/24 |
---|
| 3568 | - add: 192.168.4.0/24 |
---|
[5] | 3569 | interface: eth0.38 |
---|
[201] | 3570 | vlan-id: 13 |
---|
[5] | 3571 | main-router: gw2.schoolnet.local |
---|
[227] | 3572 | scan-mode: passive |
---|
[5] | 3573 | |
---|
[227] | 3574 | etunet: |
---|
| 3575 | ip-subnet: |
---|
| 3576 | - add: 192.168.5.0/24 |
---|
| 3577 | interface: eth2 |
---|
| 3578 | vlan-id: 14 |
---|
| 3579 | main-router: gw3.etunet.local |
---|
| 3580 | scan-mode: passive |
---|
| 3581 | |
---|
[2] | 3582 | switch: |
---|
| 3583 | - hostname: sw1.klask.local |
---|
[227] | 3584 | location: BatY / 1 floor / K004 |
---|
[2] | 3585 | portignore: |
---|
| 3586 | - 1 |
---|
| 3587 | - 2 |
---|
| 3588 | |
---|
| 3589 | - hostname: sw2.klask.local |
---|
[227] | 3590 | location: BatY / 2 floor / K203 |
---|
[5] | 3591 | type: HP2424 |
---|
[2] | 3592 | portignore: |
---|
| 3593 | - 1 |
---|
| 3594 | - 2 |
---|
[200] | 3595 | fake-ip: 192.168.9.14 |
---|
[2] | 3596 | |
---|
[227] | 3597 | - hostname: sw3.klask.local |
---|
| 3598 | location: BatY / 2 floor / K203 |
---|
| 3599 | |
---|
[200] | 3600 | I think it's pretty easy to understand. |
---|
| 3601 | The default section can be overide in any section, if parameter mean something in theses sections. |
---|
[212] | 3602 | Network to be scan are define in the network section. You must put an add by network. |
---|
| 3603 | Maybe I will make a delete line to suppress specific computers. |
---|
[200] | 3604 | The switch section define your switch. |
---|
[219] | 3605 | You have to write the port number to ignore, this was important if your switchs are cascades |
---|
[212] | 3606 | (right now, method C<updatesw> find them automatically) |
---|
| 3607 | and is still important if you have loop (with PVST or MSTP). |
---|
| 3608 | Just put the ports numbers between switch. |
---|
[2] | 3609 | |
---|
[222] | 3610 | The C<community> parameter is use to get SNMP data on switch. |
---|
| 3611 | It could be overload for each switch. |
---|
| 3612 | By default, it's value is C<public> and you have to configure a readonly word for safety reason. |
---|
| 3613 | Some few command change the switch state as the commands L</enable> and L</disable>. |
---|
| 3614 | In theses rares cases, you need a readwrite SNMP community word define in your configuration file. |
---|
| 3615 | Klask then use since version C<0.6.2> the C<community-rw> parameter which by default is egal to C<private>. |
---|
[2] | 3616 | |
---|
[222] | 3617 | |
---|
[218] | 3618 | =head1 ABBREVIATION FOR PORT |
---|
| 3619 | |
---|
| 3620 | HP Procurve and Nexans switches have a simplistic numbering scheme. |
---|
| 3621 | It's just number: 1, 2, 3... 24. |
---|
| 3622 | On HP8000 chassis, ports names begin with an uppercase letter: A1, A2... |
---|
| 3623 | Nothing is done on theses ports names. |
---|
| 3624 | |
---|
| 3625 | On HP Comware and DELL, port digitization schema use a port speed word (generally a very verbose word) |
---|
| 3626 | followed by tree number. |
---|
| 3627 | In order to have short name, |
---|
| 3628 | we made the following rules: |
---|
| 3629 | |
---|
| 3630 | Bridge-Aggregation -> Br |
---|
| 3631 | FastEthernet -> Fa |
---|
| 3632 | Forty-GigabitEthernet -> Fo |
---|
| 3633 | FortyGigabitEthernet -> Fo |
---|
| 3634 | GigabitEthernet -> Gi |
---|
| 3635 | Giga -> Gi |
---|
| 3636 | Port-Channel -> Po |
---|
| 3637 | Ten-GigabitEthernet -> Te |
---|
| 3638 | TenGigabitEthernet -> Te |
---|
| 3639 | Ten -> Te |
---|
| 3640 | |
---|
| 3641 | All Klask command automatically normalize the port name on standart output |
---|
| 3642 | and also on input command line. |
---|
| 3643 | |
---|
[246] | 3644 | In the case of use an aggregator port (Po, Tk, Br ...), |
---|
| 3645 | the real ports used are also return. |
---|
[218] | 3646 | |
---|
[246] | 3647 | |
---|
[259] | 3648 | =head1 SWITCH SUPPORTED |
---|
| 3649 | |
---|
| 3650 | Here is a list of switches where Klask gives or gave (for old switches) good results. |
---|
| 3651 | We have only a few manageable switches to actually test Klask. |
---|
| 3652 | It is quite possible that switches from other brands will work just as well. |
---|
| 3653 | You just have to do a test on it and add the line of description that goes well in the source code. |
---|
| 3654 | Contact us for any additional information. |
---|
| 3655 | |
---|
| 3656 | In the following list, the names of the switch types written in parentheses are the code names returned by Klask. |
---|
| 3657 | This makes it possible to adjust the code names of the different manufacturers! |
---|
| 3658 | |
---|
| 3659 | HP: J3299A(HP224M), J4120A(HP1600M), J9029A(HP1800-8G), J9449A(HP1810-8G), J4093A(HP2424M), J9279A(HP2510G-24), |
---|
| 3660 | J9280A(HP2510G-48), J4813A(HP2524), J4900A(HP2626A), J4900B(HP2626B), J4899B(HP2650), J9021A(HP2810-24G), J9022A(HP2810-48G), |
---|
| 3661 | J8692A(HP3500-24G), J4903A(HP2824), J4110A(HP8000M), JE074A(HP5120-24G), JE069A(HP5120-48G), JD377A(HP5500-24G), JD374A(HP5500-24F). |
---|
| 3662 | |
---|
| 3663 | BayStack: BayStack 350T HW(BS350T) |
---|
| 3664 | |
---|
| 3665 | Nexans: GigaSwitch V3 TP SFP-I 48V ES3(NA3483-6G), GigaSwitch V3 TP.PSE.+ 48/54V ES3(NA3483-6P) |
---|
| 3666 | |
---|
| 3667 | DELL: PC7024(DPC7024), N2048(DN2048), N4032F(DN4032F), N4064F(DN4064F) |
---|
| 3668 | |
---|
| 3669 | H3C and 3COM switches have never not been tested but the new HP Comware switches are exactly the same... |
---|
| 3670 | |
---|
| 3671 | H3C: H3C5500 |
---|
| 3672 | |
---|
| 3673 | 3COM: 3C17203, 3C17204, 3CR17562-91, 3CR17255-91, 3CR17251-91, 3CR17571-91, 3CRWX220095A, 3CR17254-91, 3CRS48G-24S-91, |
---|
| 3674 | 3CRS48G-48S-91, 3C17708, 3C17709, 3C17707, 3CR17258-91, 3CR17181-91, 3CR17252-91, 3CR17253-91, 3CR17250-91, 3CR17561-91, |
---|
| 3675 | 3CR17572-91, 3C17702-US, 3C17700. |
---|
| 3676 | |
---|
| 3677 | |
---|
[2] | 3678 | =head1 FILES |
---|
| 3679 | |
---|
[92] | 3680 | /etc/klask/klask.conf |
---|
[100] | 3681 | /var/lib/klask/klaskdb |
---|
| 3682 | /var/lib/klask/switchdb |
---|
[2] | 3683 | |
---|
[219] | 3684 | |
---|
[2] | 3685 | =head1 SEE ALSO |
---|
| 3686 | |
---|
| 3687 | Net::SNMP, Net::Netmask, Net::CIDR::Lite, NetAddr::IP, YAML |
---|
| 3688 | |
---|
[219] | 3689 | =over |
---|
[2] | 3690 | |
---|
[220] | 3691 | =item * L<Web site|http://servforge.legi.grenoble-inp.fr/projects/klask> |
---|
[219] | 3692 | |
---|
[220] | 3693 | =item * L<Online Manual|http://servforge.legi.grenoble-inp.fr/pub/klask/klask.html> |
---|
[219] | 3694 | |
---|
| 3695 | =back |
---|
| 3696 | |
---|
| 3697 | |
---|
[2] | 3698 | =head1 VERSION |
---|
| 3699 | |
---|
[36] | 3700 | $Id: klask 330 2017-10-31 15:05:26Z g7moreau $ |
---|
[2] | 3701 | |
---|
| 3702 | |
---|
| 3703 | =head1 AUTHOR |
---|
| 3704 | |
---|
[5] | 3705 | Written by Gabriel Moreau, Grenoble - France |
---|
[2] | 3706 | |
---|
| 3707 | |
---|
[63] | 3708 | =head1 LICENSE AND COPYRIGHT |
---|
[2] | 3709 | |
---|
| 3710 | GPL version 2 or later and Perl equivalent |
---|
[45] | 3711 | |
---|
[259] | 3712 | Copyright (C) 2005-2017 Gabriel Moreau <Gabriel.Moreau(A)univ-grenoble-alpes.fr>. |
---|