Version 36 (modified by 10 years ago) (diff) | ,
---|
Project Name
Infrastructure | CNRS_Coriolis |
Project (long title) | .......... |
Campaign Title (name data folder) | project name |
Lead Author | ............... |
Contributor | ............ |
Date Campaign Start | ......... |
Date Campaign End | ........... |
0 - Publications, reports from the project:
1 - Objectives
2 - Experimental setup
2.1 General description
include sketches, photos, ...
(to attach figures or files, leave the editor and press the button 'Attach file' at the bottom of the edit window.
Then use image or file name? to put it in the text.
2.2 Definition of the coordinate system
2.3 Relevant fixed parameters:
Notation | Defintion | Value | remarks |
H | total water height | H=80 cm | ..... |
W | channel width | L=150 cm | ..... |
$\alpha$ | slope angle | $\alpha$=20 degrees | ..... |
2.4 Definition of the variable control parameters
parameter values to be given for each experiment in section
Notation | Definition | Unit | remarks |
Param1 | |||
Param2 | |||
Param3 |
2.5 Definition of the relevant non-dimensional numbers
define here the derived parameters of interest, in particular non-dimensional numbers.
3 Instrumentation and data acquisition
3.1 Instruments
with positions of probes, cameras...
3.2 Definition of time origin and instrument synchronisation
3.3 Requested final output and statistics
4 - Methods of calibration and data processing:
5 - Organization of data files:
All data related to the project are in Coriolis /.fsnet/project/coriolis/2014/'project name'
- 0_DOC: miscellaneous documentation and reports
- 0_MATLAB_FCT: specific matlab functions
- 0_PHOTOS: photos of set-up
- 0_REF_FILES: files of general use (calibration data, grids ...)
- 0_RESULTS: processed data (time series, statistics...) and figures.
- EXP1, EXP2, folder for each experiment. Structure of each Experiment folder:
- DeviceFolder: corresponding to the data of a given instrument or camera.
- Results from data processing are stored in a folder DeviceFolder.ext where ext is set by the processing program.
- An xml file named DeviceFolder.xml specifies information from the devices, for instance timing and calibration parameters for an image series.
6 - Table of experiments
List of parameter, Param1... , denoted by names defined in section 4.2.
Name | Date | Param1 | Param2 | Param3 | Remarks |
#EXP1 | |||||
#EXP2 | |||||
#EXP3 |
7 - Diary:
EXP1
EXP2
EXP3
Attachments (2)
- Coriolis_sketch.jpg (113.8 KB) - added by 6 years ago.
- OpenDAP_GM.pdf (189.1 KB) - added by 6 years ago.
Download all attachments as: .zip