Project Name

Infrastructure	CNRS_Coriolis
Project title (long )	..........
Short title - name of the data folder	project name
Lead Author name	...............
Contributor name (add lines for each)	............
Date Campaign Start	.........
Date Campaign End	...........

0 - Publications, reports from the project

1 - Objectives

This is a template for the documentation of an experimental project. It recalls some key information needed to properly document published data. The wiki is convenient for collaborative projects, as it provides an updated common version and keeps track of the successive modifications. This template can be however used with other editing methods.

2 - Experimental setup

2.1 General description

include sketches, photos, ...

(to attach figures or files, leave the editor and press the button 'Attach file' at the bottom of the edit window.

Then use image or file name? to put it in the text.

2.2 Definition of the coordinate system

2.3 Relevant fixed parameters:

Notation	Defintion	Value	remarks
H	total water height	H=80 cm	.....
W	channel width	L=150 cm	.....
$\alpha$	slope angle	$\alpha$=20 degrees	.....

2.4 Definition of the variable control parameters

parameter values to be given for each experiment in section

Notation	Definition	Unit	remarks
Param1
Param2
Param3

2.5 Definition of the relevant non-dimensional numbers

define here the derived parameters of interest, in particular non-dimensional numbers.

3 Instrumentation and data acquisition

3.1 Instruments

with positions of probes, cameras...

3.2 Definition of time origin and instrument synchronisation

3.3 Requested final output and statistics

4 - Methods of calibration and data processing

5 - Organisation of data files

All data related to the project are in Coriolis /.fsnet/project/coriolis/2014/'project name'

• 0_DOC: miscellaneous documentation and reports
• 0_MATLAB_FCT: specific matlab functions
• 0_PHOTOS: photos of set-up
• 0_REF_FILES: files of general use (calibration data, grids ...)
• 0_RESULTS: processed data (time series, statistics...) and figures.
• EXP1, EXP2, folder for each experiment. Structure of each Experiment folder:
  • DeviceFolder: corresponding to the data of a given instrument or camera.
  • Results from data processing are stored in a folder DeviceFolder.ext where ext is set by the processing program.
  • An xml file named DeviceFolder.xml specifies information from the devices, for instance timing and calibration parameters for an image series.

6 - Table of experiments

List of parameter, Param1... , denoted by names defined in section 4.2.

Name	Date	Param1	Param2	Param3	Remarks
#EXP1
#EXP2
#EXP3

7 - Diary:

EXP1

EXP2

EXP3