source: trunk/src/fileparts_uvmat.m @ 1134

Last change on this file since 1134 was 1131, checked in by sommeria, 8 months ago

updated to read pivdata from fluidimage

File size: 10.3 KB
Line 
1%'fileparts_uvmat': splits a file name in root and indices and recognize file naming convention
2%--------------------------------------------------------------------
3%[RootPath,SubDir,RootFile,i1,i2,j1,j2,Ext,NomType]=fileparts_uvmat(FileInput)
4%
5%OUTPUT:
6%RootPath: path to the base file
7%SubDir: name of the SubDirectory for netcdf files (NomTypes with index pairs 1-2 or ab )
8%RootFile: FileName without appendix
9%i1: first number i
10%i2: second number i (only for .nc files)
11%j1: first number j
12%j2: second number j (only for .nc files)
13%FileExt: file Extension
14%NomType: char chain characterizing the file nomenclature: with values
15%   NomType='': constant name [filebase FileExt] (default output if 'NomType' is undefined)
16%   NomType='*':constant name for a file representing a series (e.g. avi movie)
17%   NomType='1','01',or '001'...': series of files with a single index i without separator(e.g. 'aa045.png').
18%   NomType='1a','1A','01a','01A','1_a','01_A',... with a numerical index and an index letter(e.g.'aa45b.png') (lower or upper case)
19%   NomType='1_1','01_1',...: matrix of files with two indices i and j separated by '_'(e.g. 'aa45_2.png')
20%   NomType='1-1': from pairs from a single index (e.g. 'aa_45-47.nc')
21%   NomType='1_1-2': pairs of j indices (e.g. 'aa_45_2-3.nc')
22%   NomType='1-2_1': pairs of i indices (e.g. 'aa_45-46_2.nc')
23%   NomType='1_ab','01_ab','01ab'..., from pairs of '#' images (e.g.'aa045bc.nc'), FileExt='.nc'
24%SubDir: name of the SubDirectory for netcdf files
25%
26%INPUT:
27%FileInput: complete name of the file, including path
28
29%=======================================================================
30% Copyright 2008-2024, LEGI UMR 5519 / CNRS UGA G-INP, Grenoble, France
31%   http://www.legi.grenoble-inp.fr
32%   Joel.Sommeria - Joel.Sommeria (A) univ-grenoble-alpes.fr
33%
34%     This file is part of the toolbox UVMAT.
35%
36%     UVMAT is free software; you can redistribute it and/or modify
37%     it under the terms of the GNU General Public License as published
38%     by the Free Software Foundation; either version 2 of the license,
39%     or (at your option) any later version.
40%
41%     UVMAT is distributed in the hope that it will be useful,
42%     but WITHOUT ANY WARRANTY; without even the implied warranty of
43%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
44%     GNU General Public License (see LICENSE.txt) for more details.
45%=======================================================================
46
47function [RootPath,SubDir,RootFile,i1,i2,j1,j2,FileExt,NomType]=fileparts_uvmat(FileInput)
48RootPath='';
49SubDir='';
50RootFile='';
51i1=[];
52i2=[];
53j1=[];
54j2=[];
55FileExt='';
56NomType='';
57
58%% display help and test function in the absence of input arument
59if ~exist('FileInput','var')
60    help fileparts_uvmat;
61    test();
62    return
63end
64
65%% default root name output
66[RootPath,FileName,FileExt]=fileparts(FileInput);
67RootFile=FileName;
68
69%% case of input file name which is a pure number
70if ~isnan(str2double(FileName))
71    RootFile='';
72    i1=str2double(FileName);
73    return
74end
75
76%% recursive test on FileName starting from the end
77% test whether FileName ends with a number or not
78r=regexp(FileName,'(?<num1>\d+)$','names');% \D = not a digit, \d =digit
79
80if ~isempty(r)% FileName end matches num1
81    num1=r.num1;
82    r=regexp(FileName,['(?<num2>\d+)(?<delim1>[-_])' num1 '$'],'names');
83    if ~isempty(r)% FileName end matches num2+delim1+num1
84        delim1=r.delim1;
85        num2=r.num2;
86        switch delim1
87            case '_'
88                delim2_to_match='-';
89            case '-'
90                delim2_to_match='_';     
91        end       
92        r=regexp(FileName,['.*\D(?<num3>\d+)(?<delim2>' delim2_to_match ')' num2 delim1 num1 '$'],'names');
93        if ~isempty(r) % FileName end matches num3 delim2 num2 delim1 num1
94            delim2=r.delim2;
95            num3=r.num3;
96            ipair=1;
97            jpair=1;
98            switch delim1
99                case '_'
100                    j1=str2double(num1);
101                    switch delim2
102                        case '-'
103                            i1=str2double(num3);
104                            i2=str2double(num2);
105                            if i2<=i1
106                                ipair=0;
107                            end
108                    end
109                case '-'
110                    j1=str2double(num2);
111                    j2=str2double(num1);
112                    if j2<=j1
113                                jpair=0;
114                    end
115                    switch delim2
116                        case '_'
117                            i1=str2double(num3);
118                    end
119            end
120            if ipair && jpair
121            NomType=[get_type(num3) delim2 get_type(num2) delim1 get_type(num1)];
122            RootFile=regexprep(FileName,[num3 delim2 num2 delim1 num1 '$'],'');
123            else
124                if ipair==0
125                    i1=i2;
126                    i2=[];
127                    NomType=[get_type(num2) delim1 get_type(num1)];
128                    RootFile=regexprep(FileName,[ num2 delim1 num1 '$'],'');
129                elseif jpair==0
130                    j1=j2;
131                    j2=[];
132                    NomType=get_type(num1);
133                    RootFile=regexprep(FileName,[num1 '$'],'');
134                end
135            end
136       
137        else
138            ipair=1;
139            switch delim1
140                case '_'
141                    i1=str2double(num2);
142                    j1=str2double(num1);
143                case '-'
144                    i1=str2double(num2);
145                    i2=str2double(num1);
146                    if i2<=i1
147                        ipair=0;
148                    end
149            end
150            if ipair
151            NomType=[get_type(num2) delim1 get_type(num1)];
152            RootFile=regexprep(FileName,[num2 delim1 num1 '$'],'');
153            else
154                i1=i2;
155                i2=[];% no pair detected if i2<=i1
156                NomType= get_type(num1);
157            RootFile=regexprep(FileName,[ num1 '$'],'');
158            end
159        end
160        NomType=regexprep(NomType,'-1','-2'); %set 1-2 instead of 1-1
161    else% only one number at the end
162        i1=str2double(num1);
163        NomType=get_type(num1);
164        RootFile=regexprep(FileName,[num1 '$'],'');
165    end
166else% FileName ends with a letter
167    %r=regexp(FileName,'.*[^a^b^A^B](?<end_string>ab|AB|[abAB])\>','names');
168    NomType='';
169    r=regexp(RootFile,'\D*(?<num1>\d+)(?<end_string>[a-z]|[A-Z]|[a-z][a-z]|[A-Z][A-Z])$','names');
170    if ~isempty(r)
171        NomType=get_type(r.end_string);
172        RootFile=regexprep(RootFile,[r.num1 r.end_string '$'],'');
173    else % case with separator '_'
174        r=regexp(RootFile,'\D*(?<num1>\d+)_(?<end_string>[a-z]|[A-Z]|[a-z][a-z]|[A-Z][A-Z])$','names');
175        if ~isempty(r)
176            NomType=['_' get_type(r.end_string)];
177            RootFile=regexprep(RootFile,[r.num1 '_' r.end_string '$'],'');
178        end
179    end
180    if ~isempty(NomType)
181        [j1,j2]=get_value(r.end_string);
182        i1=str2double(r.num1);
183        NomType=[get_type(r.num1) NomType];
184    end
185end
186
187%% suppress '_' at the end of RootFile, put it on NomType
188detect=regexp(RootFile,'_$','once'); %detect '_' at the end of RootFILE
189if ~isempty(detect)
190    RootFile=regexprep(RootFile,'_$','');
191    NomType=['_' NomType];
192end
193
194%% extract subdirectory for pairs i1-i2 or j1-j2 (or ab, AB)
195    r=regexp(RootPath,'\<(?<newrootpath>.+)(\\|/)(?<subdir>[^\\^/]+)(\\|/)*\>','names');
196    if ~isempty(r)
197        SubDir=r.subdir;
198        RootPath=r.newrootpath;
199    end
200
201
202
203function type=get_type(s)
204% returns the type of a label string:
205%   for numbers, whether filled with 0 or not.
206type='';%default
207
208if ~isempty(regexp(s,'\<\d+\>','ONCE'))
209    type=num2str(1,['%0' num2str(length(s)) 'd']);
210else
211    code=double(s); % ascii code of the input string
212    if code >= 65 & code <= 90 % test on ascii code for capital letters
213        if length(s)==1
214            type='A';
215        elseif length(s)==2
216            type='AB';
217        end
218    elseif  code >= 97 & code <= 122 % test on ascii code for small letters
219        if length(s)==1
220            type='a';
221        elseif length(s)==2
222            type='ab';
223        end
224    end
225end
226
227
228
229function [j1,j2]=get_value(s)
230% returns the value of a label string:
231%   for numbers, whether filled with 0 or not.
232%   for letters, either a, A or ab, AB.
233j1=[];
234j2=[];
235code=double(s); % ascii code of the input string
236if code >= 65 & code <= 90 % test on ascii code for capital letters
237    index=double(s)-64; %change capital letters to corresponding number in the alphabet
238elseif code >= 97 & code <= 122 % test on ascii code for small letters
239    index=double(s)-96; %change small letters to corresponding number in the alphabet
240else
241    index=str2num(s);
242end
243if ~isempty(index)
244    j1=index(1);
245    if length(index)==2
246        j2=index(2);
247    end
248end
249
250
251function test(name)
252fprintf([...
253    '######################################################\n'...
254    '               Test for fileparts_uvmat                  \n'...
255    '######################################################\n'...
256    ]);
257
258if exist('name','var')
259    FileName_list={name};
260else
261    FileName_list={...
262        'Image1a.png'...
263        'toto'...
264        'B011_1.png'...
265        'B001.png'...
266        'B55a.tif'...
267        'B002B.tiff'...
268        'B_001.png'...
269        'B_3331AB.png'...
270        'aa45_2.png'...
271        'B005.png'...
272        'Image_3.jpg'...
273        'Image_3-4.jpg'...
274        'Image_3-4_2.jpg'...
275        'Image_5_3-4.jpg'...
276        'Image_3_ab.jpg'...
277        'Image005AD.jpg'...
278        'Image_3_ac.jpg'...
279        'Image_3a-b.jpg'...
280        'Image3_a.jpg'...
281        'movie57.avi'...
282        'merged_20_12_1.png'...
283        };
284end
285
286for FileName=FileName_list
287%     [RootPath,RootFile,i1,i2,str_a,str_b,FileExt,NomType,SubDir]=name2display(FileName{1});
288    [tild,SubDir,RootFile,i1,i2,j1,j2,tild,NomType]=...
289        fileparts_uvmat(FileName{1});
290    fprintf([...
291        'File name  : ' FileName{1}  '\n'...
292        '  NomType  : '    NomType '\n'...
293        '  RootFile : '    RootFile '\n'...
294        '  i1 / i2     : '     num2str(i1) ' / ' num2str(i2) '\n'...
295        '  j1 / j2      : '    num2str(j1) ' / ' num2str(j2) '\n'...
296        ]);
297end
298
299
Note: See TracBrowser for help on using the repository browser.