source: trunk/src/mouse_up.m @ 809

Last change on this file since 809 was 809, checked in by g7moreau, 10 years ago
  • Add license
File size: 19.1 KB
RevLine 
[204]1%'mouse_up': function  activated when the mouse button is released
2%------------------------------------------------------------------------
3% function mouse_up(hObject,eventdata,handles)
4% activated by the command:
5% set(hObject,'WindowButtonUpFcn',{'mouse_up'}),
6% where hObject is the handle of the figure
7
[809]8%=======================================================================
9% Copyright 2008-2014, LEGI UMR 5519 / CNRS UJF G-INP, Grenoble, France
10%   http://www.legi.grenoble-inp.fr
11%   Joel.Sommeria - Joel.Sommeria (A) legi.cnrs.fr
12%
[204]13%     This file is part of the toolbox UVMAT.
[809]14%
[204]15%     UVMAT is free software; you can redistribute it and/or modify
[809]16%     it under the terms of the GNU General Public License as published
17%     by the Free Software Foundation; either version 2 of the license,
18%     or (at your option) any later version.
19%
[204]20%     UVMAT is distributed in the hope that it will be useful,
21%     but WITHOUT ANY WARRANTY; without even the implied warranty of
22%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
[809]23%     GNU General Public License (see LICENSE.txt) for more details.
24%=======================================================================
[204]25
26function mouse_up(hObject,eventdata,handles)
[622]27
[204]28test_ruler=0;%default
[682]29hcurrentaxes=get(hObject,'CurrentAxes');
30if isempty(hcurrentaxes)
31    return % no axes in the current figure
32end
33AxeData=get(hcurrentaxes,'UserData');
[625]34if isfield(AxeData,'ParentAxes')% case of a zoom plot as current axis
35    hcurrentaxes=AxeData.ParentAxes;
36    AxeData=get(hcurrentaxes,'UserData');
37    hcurrentfig=get(hcurrentaxes,'parent');%handles of the GUI parent of the zoom plot
38    testsubplot=1;% mouse selection is on a zoom subplot
39else
40    hcurrentfig=hObject;
41    testsubplot=0;
42end
[699]43%set(get(hcurrentfig,'CurrentObject'),'Selected','off')
44
[622]45CurrentOrigin=[];
[204]46if isfield(AxeData,'CurrentOrigin')
47    CurrentOrigin=AxeData.CurrentOrigin;
48end
[625]49FigTag=get(hcurrentfig,'tag');
50hhcurrentfig=guidata(hcurrentfig);%the current figure is a GUI (uvmat or view_field)
51CheckZoom=get(hhcurrentfig.CheckZoom,'Value');
52CheckZoomFig=get(hhcurrentfig.CheckZoomFig,'Value');%exclusive to CheckZoom
[204]53huvmat=findobj(allchild(0),'tag','uvmat');%find the uvmat interface handle
54if ~isempty(huvmat)
55    hhuvmat=guidata(huvmat);
56    UvData=get(huvmat,'UserData');
[625]57   test_ruler=~CheckZoom && isequal(get(hhuvmat.MenuRuler,'checked'),'on');%test for ruler  action, second priority
[204]58end
[625]59test_drawing=0;%default, =1 to allow drawing by further mouse action
[681]60if ~(isfield(AxeData,'Enable')&& strcmp(AxeData.Enable,'on'))
61    return
62end
[699]63
[682]64xy=get(hcurrentaxes,'CurrentPoint');%xy(1,1),xy(1,2): current x,y positions in axes coordinates
[204]65
[625]66
67%% proceed with the creation or editing (translation/deformation) of an object
[204]68if ~isempty(huvmat) && isfield(AxeData,'Drawing') && ~isequal(AxeData.Drawing,'off') && isfield(AxeData,'CurrentObject')...
[444]69        && ~isempty(AxeData.CurrentObject) && ishandle(AxeData.CurrentObject)
[699]70    set(AxeData.CurrentObject,'Selected','off')
[444]71    PlotData=get(AxeData.CurrentObject,'UserData');%get data attached to the current projection object
[204]72    IndexObj=PlotData.IndexObj;
[622]73    ObjectData=UvData.ProjObject{IndexObj};
[444]74    check_multiple=0;
[625]75   
76    h_set_object=findobj(allchild(0),'Tag','set_object');
77    hh_set_object=guidata(h_set_object);
78    ObjectData.Coord=get(hh_set_object.Coord,'Data');
79   
[204]80    % ending translation
81    if isequal(AxeData.Drawing,'translate')
82        XYData=AxeData.CurrentOrigin;
83        DX=xy(1,1)-XYData(1);%translation from initial position
84        DY=xy(1,2)-XYData(2);
85        ObjectData.Coord(:,1)=ObjectData.Coord(:,1)+DX;
86        ObjectData.Coord(:,2)=ObjectData.Coord(:,2)+DY;
[681]87        set(hh_set_object.Coord,'Data',ObjectData.Coord);
[625]88        %ending object deformation
[204]89    elseif isequal(AxeData.Drawing,'deform')
90        ind_move=AxeData.CurrentIndex;
91        ObjectData.Coord(ind_move,1)=xy(1,1);
92        ObjectData.Coord(ind_move,2)=xy(1,2);
[681]93        set(hh_set_object.Coord,'Data',ObjectData.Coord);
[625]94        %creating object
[444]95    else
[429]96        switch ObjectData.Type
97            case {'line'}
[622]98                if size(ObjectData.Coord,1)==1 % this is the mouse up for the first point, continue until next click
99                    check_multiple=1;
[204]100                end
[622]101            case {'rectangle','ellipse','volume'}
[625]102                ObjectData.Coord=(CurrentOrigin+xy(1,1:2))/2;% keep only the first point coordinate
[622]103                ObjectData.RangeX=abs(ObjectData.Coord(1,1)-xy(1,1));%rectangle width
[625]104                ObjectData.RangeY=abs(ObjectData.Coord(1,2)-xy(1,2));%rectangle height
[622]105                if isequal(ObjectData.RangeX,0)||isequal(ObjectData.RangeY,0)
106                    check_multiple=1;% pass to next mous up if width of height=0
[444]107                end
[429]108            case 'plane' %case of 'plane'
109                DX=(xy(1,1)-ObjectData.Coord(1,1));
110                DY=(xy(1,2)-ObjectData.Coord(1,2));
111                ObjectData.Phi=(angle(DX+i*DY))*180/pi;%rectangle width
112                if isfield(ObjectData,'RangeX')
113                    XMax=sqrt(DX*DX+DY*DY);
114                    if XMax>max(ObjectData.RangeX)
115                        ObjectData.RangeX=[min(ObjectData.RangeX) XMax];
116                    end
117                end
[444]118            otherwise
[625]119                check_multiple=1;
[204]120        end
121    end
122   
123    %show object coordinates in the GUI set_object
[379]124    if strcmp(ObjectData.Type,'rectangle')||strcmp(ObjectData.Type,'ellipse')
[388]125        set(hh_set_object.num_RangeX_2,'String',num2str(ObjectData.RangeX,4));
126        set(hh_set_object.num_RangeY_2,'String',num2str(ObjectData.RangeY,4));
[204]127    end
[625]128   
129    %% stop drawing and plot the projected field if the object manipulation is finished
[622]130    if check_multiple==0  || isequal(get(hcurrentfig,'SelectionType'),'alt')
[714]131        pointer=get(hcurrentfig,'Pointer');%memorize the current pointer shape
132        set(hcurrentfig,'Pointer','watch')% set the pointer shape to watch to prevent further mouse action
[204]133        AxeData.CurrentOrigin=[]; %suppress the current origin
[625]134        hobject=UvData.ProjObject{IndexObj}.DisplayHandle.(FigTag);
[622]135        if ~isempty(hObject)
[625]136            ProjObject=UvData.ProjObject{get(hhuvmat.ListObject_1,'Value')};
137            AxeData.CurrentObject=plot_object(ObjectData,ProjObject,hobject,'m');%draw the object and its handle becomes AxeData.CurrentObject
[622]138        end
139        %%
[444]140        if  ~isempty(ObjectData)
141            % plot the field projected on the object
[204]142            ProjData= proj_field(UvData.Field,ObjectData);%project the current interface field on ObjectData
143            if ~isempty(ProjData)
[625]144                if strcmp(FigTag,'uvmat')% uvmat plot selected, projection plot seen in view_field
[444]145                    hview_field=findobj(allchild(0),'tag','view_field');
[204]146                    if isempty(hview_field)
[429]147                        hview_field=view_field(ProjData); %open the view_field GUI for plot
[413]148                    else
[429]149                        hhview_field=guidata(hview_field);
[511]150                        [PlotType,PlotParam]=plot_field(ProjData,hhview_field.PlotAxes,read_GUI(hview_field));%update an existing  plot in view_field
[608]151                        errormsg=fill_GUI(PlotParam,hview_field);
[204]152                    end
153                    ViewFieldData=get(hview_field,'UserData');
[429]154                    haxes=findobj(hview_field,'tag','axes3');
155                    if strcmp(get(haxes,'Visible'),'off')%sempty(PlotParam.Coordinates)% case of no plot display (pure text table)
156                        h_TableDisplay=findobj(hview_field,'tag','TableDisplay');
157                        pos_table=get(h_TableDisplay,'Position');
158                        pos=get(hview_field,'Position');
159                        set(hview_field,'Position',[pos(1)+pos(3)-pos_table(3) pos(2)+pos(4)-pos_table(4) pos_table(3) pos_table(4)])
160                        drawnow
161                        set(hview_field,'UserData',ViewFieldData);% restore the previously stored GUI position after GUI resizing
[681]162                    elseif isfield(ViewFieldData,'GUISize')
[429]163                        set(hview_field,'Position',ViewFieldData.GUISize)
164                    end
[204]165                else
[511]166                    UvData.PlotAxes=ProjData;
[625]167                    [PlotType,PlotParam]=plot_field(ProjData,hhuvmat.PlotAxes,read_GUI(huvmat));%update an existing field plot
[608]168                    errormsg=fill_GUI(PlotParam,huvmat);
[204]169                end
170            end
[650]171            set(hhuvmat.CheckViewField,'Value',1);%
[701]172            set(hhuvmat.CheckEditObject,'Value',1);%   
173            set(hhuvmat.MenuObject,'checked','off'); %desactivate object creation mode
[650]174            set(hhuvmat.CheckEditObject,'Enable','on');%
[625]175            set(get(h_set_object,'children'),'Enable','on')
[204]176        end
[625]177        UvData.ProjObject{IndexObj}=ObjectData;
178        if isfield(UvData.ProjObject{IndexObj},'CreateMode')
179            UvData.ProjObject{IndexObj}=rmfield(UvData.ProjObject{IndexObj},'CreateMode');%remove createMode to mark the object as finished
180        end
[714]181        set(hcurrentfig,'Pointer',pointer)% % revert the pointer shape to allow further mouse action
[444]182    else
[625]183        test_drawing=1;%allow continuation of drawing object
184        AxeData.CurrentOrigin=[xy(1,1) xy(1,2)]; %the current point becomes the next current origin
[444]185    end
[625]186    %     UvData.ProjObject{IndexObj}=ObjectData;
[204]187    hother=findobj('Tag','deformpoint');%find all the deformpoints
[444]188    set(hother,'Color','b');%reset all the deformpoints in 'blue'
[204]189end
190
[625]191%% creation or update of a  zoom sub-plot
192if CheckZoomFig && isequal(get(hcurrentfig,'SelectionType'),'normal')&&...%if left button has been pressed
193     ~isempty(CurrentOrigin) && ~isequal(CurrentOrigin(1),xy(1,1)) && ~isequal(CurrentOrigin(2),xy(1,2))%if mouse moved in x and y since presed down
[622]194    hparentfig=hcurrentfig;
[204]195    %open or update a new zoom figure if a rectangle has been drawn
[625]196    if ishandle(hcurrentaxes);
[204]197        if isfield(AxeData,'CurrentRectZoom') && ~isempty(AxeData.CurrentRectZoom) && ishandle(AxeData.CurrentRectZoom)
[625]198            %PosRect=get(AxeData.CurrentRectZoom,'Position');
[204]199            if isfield(AxeData,'CurrentVec') && ~isempty(AxeData.CurrentVec) && ishandle(AxeData.CurrentVec)
200                delete(AxeData.CurrentVec)
201            end
[625]202            if ~testsubplot% if we are not already on a zoom plot
203                hfig2=findobj(allchild(0),'Tag','zoom_fig');
204                if isempty(hfig2)% create zoom sub plot if absent
205                    hfig2=figure('name',['zoom_' FigTag],'tag','zoom_fig');%create new figure (unit='pixels' by default)
206                    set(0,'Unit','pixels')
207                    FigPos=get(hfig2,'Position');%get the standard width and height of the fig
208                    ScreenSize=get(0,'ScreenSize');% get the size of the screen, to put the fig on the upper right
209                    Left=ScreenSize(3)- FigPos(3)-40; %right edge close to the right, with margin=40
210                    Bottom=ScreenSize(4)-FigPos(4)-40; %put fig at top right
211                    FigPos(1:2)=[Left Bottom];
212                    set(hfig2,'Position',FigPos);% put the zoom fig close to the upper right of the screen
213                    map=colormap(hcurrentaxes);
214                    colormap(map);%transmit the current colormap to the zoom fig
215                    set(hfig2,'KeyPressFcn',{@keyboard_callback,handles})%set keyboard action function
216                    set(hfig2,'WindowButtonMotionFcn',{@mouse_motion,handles})%set mouse action function
217                    set(hfig2,'WindowButtonDownFcn',{@mouse_down})%set mouse click action function
218                    set(hfig2,'WindowButtonUpFcn',{@mouse_up,handles})
219                else
220                    zoom_axes=findobj(hfig2,'Type','axes');%delete existing axes
221                    axes(zoom_axes);%make the zoom axes apparent
222                    delete(zoom_axes)
223                end
224                set(hfig2,'DeleteFcn',{@close_fig,AxeData.CurrentRectZoom})
225                set(hfig2,'UserData',AxeData.CurrentRectZoom)% record the parent object (zoom rectangle) in the new fig   
226                AxeData.ZoomAxes=copyobj(hcurrentaxes,hfig2); %copy the current graph axes to the zoom figure
[622]227                hrect_zoom=findobj(AxeData.ZoomAxes,'Tag','rect_zoom');%find and delete the copy of the rect_zoom rectangle
228                delete(hrect_zoom)
[204]229                hcol=findobj(hparentfig,'Tag','Colorbar'); %look for colorbar axes
230                if ~isempty(hcol)
231                    hcol_new=colorbar;
232                    YTick=get(hcol,'YTick');
233                    YTicklabel=get(hcol,'Yticklabel');
234                    colbarlim=get(hcol,'YLim');
235                    newcolbarlim=get(hcol_new,'YLim');
236                    scale_bar=(newcolbarlim(2)-newcolbarlim(1))/(colbarlim(2)-colbarlim(1));
237                    YTick_rescaled=newcolbarlim(1)+scale_bar*(YTick-colbarlim(1));
238                    set(hcol_new,'YTick',YTick_rescaled);
239                    set(hcol_new,'Yticklabel',YTicklabel);
240                end
[625]241                ChildAxeData=get(AxeData.ZoomAxes,'UserData');
242            end 
243            ChildAxeData.CurrentOrigin=[];% forget the current origin
[221]244            ChildAxeData.CurrentRectZoom=[]; % no rect zoom in the new window
245            ChildAxeData.Drawing='off';
[625]246            ChildAxeData.ParentAxes=hcurrentaxes;
247            ChildAxeData.ParentRect=AxeData.CurrentRectZoom;%set the rectangle drawing as a 'parent' associated to the new axe
248            if xy(1,1)>CurrentOrigin(1)
249            set(AxeData.ZoomAxes,'Xlim',[CurrentOrigin(1) xy(1,1)])
250            else
251                set(AxeData.ZoomAxes,'Xlim',[xy(1,1) CurrentOrigin(1)])
252            end
253            if xy(1,2)>CurrentOrigin(2)
254            set(AxeData.ZoomAxes,'Ylim',[CurrentOrigin(2) xy(1,2)])
255            else
256                set(AxeData.ZoomAxes,'Ylim',[xy(1,2) CurrentOrigin(2)])
257            end
[204]258            set(AxeData.ZoomAxes,'UserData',ChildAxeData);%update the AxeData of the new axes
259        end
260    end
261end
262
[210]263%% zoom in or out by a factor 2 if no new figure is created
[625]264if CheckZoom
265    if testsubplot
266        haxes=gca;% zoom on a zoom sub-plot
267    else
268        haxes=hcurrentaxes;% zoom on the main plot
269    end
270   % xy=get(haxes,'CurrentPoint');%xy(1,1),xy(1,2): current x,y positions in axes coordinates
271    xlim=get(haxes,'XLim');
272    ylim=get(haxes,'YLim');
[483]273    % if left mouse button has been pressed, zoom in by a factor of 2
[625]274    if  isequal(get(gcf,'SelectionType'),'normal');%if left button has been pressed, zoom in by a factor of 2
275        PlotBoxAspectRatio=get(haxes,'PlotBoxAspectRatio');
[483]276        yoverx=PlotBoxAspectRatio(2)/PlotBoxAspectRatio(1);
277        if yoverx <2
278            xlim(1)=0.5*xy(1,1)+0.5*xlim(1);
279            xlim(2)=0.5*xy(1,1)+0.5*xlim(2);%double the field whith the middle at the selected points
[625]280            set(haxes,'XLim',xlim)
[483]281        end
282        if yoverx >0.5
283            ylim(2)=0.5*xy(1,2)+0.5*ylim(2);
284            ylim(1)=0.5*xy(1,2)+0.5*ylim(1);
[625]285            set(haxes,'YLim',ylim)
[483]286        end
287       
288        % if right mouse button has been pressed, zoom out by a factor of 2
[221]289    else
[252]290        xlim(1)=2*xlim(1)-xy(1,1);% reverse of the zoom on action
[204]291        xlim(2)=2*xlim(2)-xy(1,1);
292        ylim(1)=2*ylim(1)-xy(1,2);
293        ylim(2)=2*ylim(2)-xy(1,2);
[625]294        % adjust the zoom out to the available field
295        if ~testsubplot && isfield(AxeData,'RangeX')&& isfield(AxeData,'RangeY')
[204]296            xlim(1)=max(AxeData.RangeX(1),xlim(1));
297            xlim(2)=min(AxeData.RangeX(2),xlim(2));
298            ylim(1)=max(AxeData.RangeY(1),ylim(1));
299            ylim(2)=min(AxeData.RangeY(2),ylim(2));
[252]300            if ylim(1)>=ylim(2)|| xlim(1)>=xlim(2)
301                xlim=AxeData.RangeX;
302                ylim=AxeData.RangeY;
303            end
[483]304            % desactivate the zoom if the full field is visible within the axes
[204]305            if isequal(xlim,AxeData.RangeX) && isequal(ylim,AxeData.RangeY)
[292]306                set(hhuvmat.CheckZoom,'Value',0)
[625]307               % set(hhuvmat.CheckZoom,'BackgroundColor',[0.7 0.7 0.7])
[292]308                set(hhuvmat.CheckFixLimits,'Value',0)
[625]309              %  set(hhuvmat.CheckFixLimits,'BackgroundColor',[0.7 0.7 0.7])
[204]310            end
311        end
[625]312        set(haxes,'XLim',xlim)
313        set(haxes,'YLim',ylim)
[204]314        %test whther zoom out is operating (to inactivate AxedAta
315        if ~isfield(AxeData,'CurrentXLim')|| ~isequal(xlim,AxeData.CurrentXLim)
316            AxeData.CurrentXLim=xlim;%
317        end
318    end
[625]319    %if isfield(AxeData,'LimEditBox')&& AxeData.LimEditBox% update display of the GUI containing the axis (uvmat or view_field)
320    if testsubplot
321        set(AxeData.CurrentRectZoom,'Position',[xlim(1) ylim(1) xlim(2)-xlim(1) ylim(2)-ylim(1)])
322    else
[292]323        set(hhcurrentfig.num_MinX,'String',num2str(xlim(1)))
324        set(hhcurrentfig.num_MaxX,'String',num2str(xlim(2)))
325        set(hhcurrentfig.num_MinY,'String',num2str(ylim(1)))
326        set(hhcurrentfig.num_MaxY,'String',num2str(ylim(2)))
[204]327    end
328end
329
330%% editing calibration point
[625]331if ~CheckZoom && isfield(AxeData,'Drawing') && isequal(AxeData.Drawing,'calibration')
[204]332    h_geometry_calib=findobj(allchild(0),'tag','geometry_calib'); %find the geomterty_calib GUI
333    if ~isempty(h_geometry_calib)
334        hh_geometry_calib=guidata(h_geometry_calib);
[660]335        edit_test=get(hh_geometry_calib.CheckEnableMouse,'Value');
[625]336        hh=findobj(hcurrentaxes,'tag','calib_points');%look for handle of calibration points
[204]337        if ~isempty(hh) && edit_test
338            index_point=get(hh,'UserData');
339            set(hh,'UserData',[])%remove edit mode
340            h_ListCoord=hh_geometry_calib.ListCoord; %handles of the coordinate list
[657]341            Coord=get(h_ListCoord,'Data');
342            Coord(index_point,4)=xy(1,1);
343            Coord(index_point,5)=xy(1,2);
344            set(h_ListCoord,'Data',Coord)
345            set(hh,'XData',Coord(:,4))
346            set(hh,'YData',Coord(:,5))
[204]347        end
348    end
349end
350
351%% finalising ruler
[625]352if test_ruler && ~isempty(xy)
[738]353    %set(hhuvmat.MenuRuler,'checked','off')%desable the ruler option in uvmat
[625]354    xy=get(hcurrentaxes,'CurrentPoint');% get the current mouse coordinates
[483]355    RulerCoord=[AxeData.RulerCoord ;xy(1,1:2)];% append the recorded ruler origin to the current mouse coordinates
[204]356    RulerCoord=diff(RulerCoord,1);% coordiante difference between segment end and beginning
357    RulerCoord=RulerCoord(1)+i*RulerCoord(2);
358    distance=abs(RulerCoord);
359    azimuth=(180/pi)*angle(RulerCoord);
360    msgbox_uvmat('RULER','',['length: ' num2str(distance,3) ',  angle(degrees): ' num2str(azimuth,3)])
361    delete(AxeData.RulerHandle)%delete the ruler graphic object
362    AxeData=rmfield(AxeData,'RulerHandle');%remove the ruler handle in AxeData
363    AxeData.Drawing='off';%exit the ruler drawing mode
364end
365
366
367%% update
368if test_drawing==0
369        AxeData.Drawing='off';%stop current drawing action
370end
[625]371set(hcurrentaxes,'UserData',AxeData);
[204]372if ~isempty(huvmat)
373    set(huvmat,'UserData',UvData);
374end
375
[625]376%------------------------------------------------------------------------   
377% --- 'close_fig': function  activated when a zoom figure is closed
378%------------------------------------------------------------------------
379function close_fig(ggg,eventdata,hparent)
[204]380
[625]381hfig=get(get(hparent,'parent'),'parent');
382hbutton=findobj(hfig,'Tag','CheckZoomFig');
383if ~isempty(hbutton)
384    set(hbutton,'Value',0)% desactivate the zoom fig option
385end
386delete(hparent)  % delete the rectangle showing the zoom graph in the parent fig
387
Note: See TracBrowser for help on using the repository browser.