source: trunk/src/proj_field.m @ 611

Last change on this file since 611 was 603, checked in by sommeria, 11 years ago

bugs corrected, improvement of civ_input GUI

File size: 106.5 KB
Line 
1%'proj_field': projects the field on a projection object
2%--------------------------------------------------------------------------
3%  function [ProjData,errormsg]=proj_field(FieldData,ObjectData)
4%
5% OUTPUT:
6% ProjData structure containing the fields of the input field FieldData,
7% transmitted or projected on the object, plus the additional fields
8%    .UMax, .UMin, .VMax, .VMin: min and max of velocity components in a domain
9%    .UMean,VMean: mean of the velocity components in a domain
10%    .AMin, AMax: min and max of a scalar
11%    .AMean: mean of a scalar in a domain 
12%  .NbPix;
13%  .DimName=  names of the matrix dimensions (matlab cell)
14%  .VarName= names of the variables [ProjData.VarName {'A','AMean','AMin','AMax'}];
15%  .VarDimNameIndex= dimensions of the variables, indicated by indices in the list .DimName;
16%
17%INPUT
18% ObjectData: structure characterizing the projection object
19%    .Type : type of projection object
20%    .ProjMode=mode of projection ;
21%    .CoordUnit: 'px', 'cm' units for the coordinates defining the object
22%    .Angle (  angles of rotation (=[0 0 0] by default)
23%    .ProjAngle=angle of projection;
24%    .DX,.DY,.DZ=increments along each coordinate
25%    .Coord(nbpoints,3): set of coordinates defining the object position;
26
27%FieldData: data of the field to be projected on the projection object, with optional fields
28%    .Txt: error message, transmitted to the projection
29%    .FieldList: cell array of strings representing the fields to calculate
30%    .CoordMesh: typical distance between data points (used for mouse action or display), transmitted
31%    .CoordUnit, .TimeUnit, .dt: transmitted
32% standardised description of fields, nc-formated Matlab structure with fields:
33%         .ListGlobalAttribute: cell listing the names of the global attributes
34%        .Att_1,Att_2... : values of the global attributes
35%            .ListVarName: cell listing the names of the variables
36%           .VarAttribute: cell of structures s containing names and values of variable attributes (s.name=value) for each variable of .ListVarName
37%        .Var1, .Var2....: variables (Matlab arrays) with names listed in .ListVarName
38% The variables are grouped in 'fields', made of a set of variables with common dimensions (using the function find_field_cells)
39% The variable attribute 'Role' is used to define the role for plotting:
40%       Role = 'scalar':  (default) represents a scalar field
41%            = 'coord':  represents a set of unstructured coordinates, whose
42%                     space dimension is given by the last array dimension (called 'NbDim').
43%            = 'coord_x', 'coord_y',  'coord_z': represents a separate set of
44%                        unstructured coordinate x, y  or z
45%            = 'vector': represents a vector field whose number of components
46%                is given by the last dimension (called 'NbDim')
47%            = 'vector_x', 'vector_y', 'vector_z'  :represents the x, y or z  component of a vector 
48%            = 'warnflag' : provides a warning flag about the quality of data in a 'Field', default=0, no warning
49%            = 'errorflag': provides an error flag marking false data,
50%                   default=0, no error. Different non zero values can represent different criteria of elimination.
51%
52% Default role of variables (by name)
53%  vector field:
54%    .X,.Y: position of the velocity vectors, projected on the object
55%    .U, .V, .W: velocity components, projected on the object
56%    .C, .CName: scalar associated to the vector
57%    .F : equivalent to 'warnflag'
58%    .FF: equivalent to 'errorflag'
59%  scalar field or image:
60%    .AName: name of a scalar (to be calculated from velocity fields after projection), transmitted
61%    .A: scalar, projected on the object
62%    .AX, .AY: positions for the scalar
63%     case of a structured grid: A is a dim 2 matrix and .AX=[first last] (length 2 vector) represents the first and last abscissa of the grid
64%     case of an unstructured scalar: A is a vector, AX and AY the corresponding coordinates
65%
66%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
67%  Copyright Joel Sommeria, 2008, LEGI / CNRS-UJF-INPG, sommeria@coriolis-legi.org.
68%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
69%     This file is part of the toolbox UVMAT.
70%
71%     UVMAT is free software; you can redistribute it and/or modify
72%     it under the terms of the GNU General Public License as published by
73%     the Free Software Foundation; either version 2 of the License, or
74%     (at your option) any later version.
75%
76%     UVMAT is distributed in the hope that it will be useful,
77%     but WITHOUT ANY WARRANTY; without even the implied warranty of
78%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
79%     GNU General Public License (file UVMAT/COPYING.txt) for more details.
80%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
81
82function [ProjData,errormsg]=proj_field(FieldData,ObjectData)
83errormsg='';%default
84ProjData=[];
85
86%% in the absence of object Type or projection mode, or object coordinaes, the output is empty
87if ~isfield(ObjectData,'Type')||~isfield(ObjectData,'ProjMode')
88    return
89end
90% case of no projection (object is used only as graph display)
91if isequal(ObjectData.ProjMode,'none')||isequal(ObjectData.ProjMode,'mask_inside')||isequal(ObjectData.ProjMode,'mask_outside')
92    return
93end
94if ~isfield(ObjectData,'Coord')||isempty(ObjectData.Coord)
95    if strcmp(ObjectData.Type,'plane')
96        ObjectData.Coord=[0 0];%default
97    else
98        return
99    end
100end
101
102%% apply projection depending on the object type
103switch ObjectData.Type
104    case 'points'
105    [ProjData,errormsg]=proj_points(FieldData,ObjectData);
106    case {'line','polyline'}
107     [ProjData,errormsg] = proj_line(FieldData,ObjectData);
108    case {'polygon','rectangle','ellipse'}
109        if isequal(ObjectData.ProjMode,'inside')||isequal(ObjectData.ProjMode,'outside')
110            [ProjData,errormsg] = proj_patch(FieldData,ObjectData);
111        else
112            [ProjData,errormsg] = proj_line(FieldData,ObjectData);
113        end
114    case 'plane'
115            [ProjData,errormsg] = proj_plane(FieldData,ObjectData);
116    case 'volume'
117        [ProjData,errormsg] = proj_volume(FieldData,ObjectData);
118end
119
120%-----------------------------------------------------------------
121%project on a set of points
122function  [ProjData,errormsg]=proj_points(FieldData,ObjectData)%%
123%-------------------------------------------------------------------
124
125siz=size(ObjectData.Coord);
126width=0;
127if isfield(ObjectData,'Range')
128    width=ObjectData.Range(1,2);
129end
130if isfield(ObjectData,'RangeX')&&~isempty(ObjectData.RangeX)
131    width=max(ObjectData.RangeX);
132end
133if isfield(ObjectData,'RangeY')&&~isempty(ObjectData.RangeY)
134    width=max(width,max(ObjectData.RangeY));
135end
136if isfield(ObjectData,'RangeZ')&&~isempty(ObjectData.RangeZ)
137    width=max(width,max(ObjectData.RangeZ));
138end
139if isequal(ObjectData.ProjMode,'projection')
140    if width==0
141        errormsg='projection range around points needed';
142        return
143    end
144elseif  ~isequal(ObjectData.ProjMode,'interp_lin')
145    errormsg=(['ProjMode option ' ObjectData.ProjMode ' not available in proj_field']);
146        return
147end
148[ProjData,errormsg]=proj_heading(FieldData,ObjectData);
149ProjData.NbDim=0;
150[CellInfo,NbDimArray,errormsg]=find_field_cells(FieldData);
151if ~isempty(errormsg)
152    errormsg=['error in proj_field/proj_points:' errormsg];
153    return
154end
155%LOOP ON GROUPS OF VARIABLES SHARING THE SAME DIMENSIONS
156for icell=1:length(CellInfo)
157    if NbDimArray(icell)<=1
158        continue %projection only for multidimensional fields
159    end
160    VarIndex=CellInfo{icell}.VarIndex;%  indices of the selected variables in the list FieldData.ListVarName
161    ivar_X=CellInfo{icell}.CoordIndex(end);
162    ivar_Y=CellInfo{icell}.CoordIndex(end-1);
163    ivar_Z=[];
164    if NbDimArray(icell)==3
165        ivar_Z=CellInfo{icell}.CoordIndex(1);
166    end
167    ivar_FF=[];
168    if isfield(CellInfo{icell},'VarIndex_errorflag')
169        ivar_FF=CellInfo{icell}.VarIndex_errorflag;
170        if numel(ivar_FF)>1
171            errormsg='multiple error flag input';
172            return
173        end
174    end   
175    % select types of  variables to be projected
176   ListProj={'VarIndex_scalar','VarIndex_image','VarIndex_color','VarIndex_vector_x','VarIndex_vector_y'};
177      check_proj=false(size(FieldData.ListVarName));
178   for ilist=1:numel(ListProj)
179       if isfield(CellInfo{icell},ListProj{ilist})
180           check_proj(CellInfo{icell}.(ListProj{ilist}))=1;
181       end
182   end
183   VarIndex=find(check_proj);
184    ProjData.ListVarName={'Y','X','NbVal'};
185    ProjData.VarDimName={'nb_points','nb_points','nb_points'};
186    ProjData.VarAttribute{1}.Role='ancillary';
187    ProjData.VarAttribute{2}.Role='ancillary';
188    ProjData.VarAttribute{3}.Role='ancillary';
189    for ivar=VarIndex       
190        VarName=FieldData.ListVarName{ivar};
191        ProjData.ListVarName=[ProjData.ListVarName {VarName}];% add the current variable to the list of projected variables
192        ProjData.VarDimName=[ProjData.VarDimName {'nb_points'}]; % projected VarName has a single dimension called 'nb_points' (set of projection points)
193
194    end
195    if strcmp( CellInfo{icell}.CoordType,'scattered')
196        coord_x=FieldData.(FieldData.ListVarName{ivar_X});
197        coord_y=FieldData.(FieldData.ListVarName{ivar_Y});
198        test3D=0;% TEST 3D CASE : NOT COMPLETED ,  3D CASE : NOT COMPLETED
199        if length(ivar_Z)==1
200            coord_z=FieldData.(FieldData.ListVarName{ivar_Z});
201            test3D=1;
202        end
203   
204        for ipoint=1:siz(1)
205           Xpoint=ObjectData.Coord(ipoint,:);
206           distX=coord_x-Xpoint(1);
207           distY=coord_y-Xpoint(2);         
208           dist=distX.*distX+distY.*distY;
209           indsel=find(dist<width*width);
210           ProjData.X(ipoint,1)=Xpoint(1);
211           ProjData.Y(ipoint,1)=Xpoint(2);
212           if isequal(length(ivar_FF),1)
213               FFName=FieldData.ListVarName{ivar_FF};
214               FF=FieldData.(FFName)(indsel);
215               indsel=indsel(~FF);
216           end
217           ProjData.NbVal(ipoint,1)=length(indsel);
218            for ivar=VarIndex
219               VarName=FieldData.ListVarName{ivar};
220               if isempty(indsel)
221                    ProjData.(VarName)(ipoint,1)=NaN;
222               else
223                    Var=FieldData.(VarName)(indsel);
224                    ProjData.(VarName)(ipoint,1)=mean(Var);
225                    if isequal(ObjectData.ProjMode,'interp_lin')
226                         ProjData.(VarName)(ipoint,1)=griddata_uvmat(coord_x(indsel),coord_y(indsel),Var,Xpoint(1),Xpoint(2));
227                    end
228               end
229            end
230        end
231    else    %case of structured coordinates
232        if  strcmp( CellInfo{icell}.CoordType,'grid')
233            AYName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(end-1)};
234            AXName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(end)};
235            eval(['AX=FieldData.' AXName ';']);% set of x positions
236            eval(['AY=FieldData.' AYName ';']);% set of y positions 
237            AName=FieldData.ListVarName{VarIndex(1)};% a single variable assumed in the current cell
238            eval(['A=FieldData.' AName ';']);% scalar
239            npxy=size(A);         
240            %update VarDimName in case of components (non coordinate dimensions e;g. color components)
241            if numel(npxy)>NbDimArray(icell)
242                ProjData.VarDimName{end}={'nb_points','component'};
243            end
244            for idim=1:NbDimArray(icell) %loop on space dimensions
245                test_interp(idim)=0;%test for coordiate interpolation (non regular grid), =0 by default
246                test_coord(idim)=0;%test for defined coordinates, =0 by default
247                ivar=CellInfo{icell}.CoordIndex(idim);
248                Coord{idim}=FieldData.(FieldData.ListVarName{ivar}); % position for the first index
249                if numel(Coord{idim})==2
250                    DCoord_min(idim)= (Coord{idim}(2)-Coord{idim}(1))/(npxy(idim)-1);
251                else
252                    DCoord=diff(Coord{idim});
253                    DCoord_min(idim)=min(DCoord);
254                    DCoord_max=max(DCoord);
255                    test_direct(idim)=DCoord_max>0;% =1 for increasing values, 0 otherwise
256                    test_direct_min=DCoord_min(idim)>0;% =1 for increasing values, 0 otherwise
257                    if ~isequal(test_direct(idim),test_direct_min)
258                        errormsg=['non monotonic dimension variable # ' num2str(idim)  ' in proj_field.m'];
259                        return
260                    end
261                    test_interp(idim)=(DCoord_max-DCoord_min(idim))> 0.0001*abs(DCoord_max);% test grid regularity
262                    test_coord(idim)=1;
263                end
264            end
265            DX=DCoord_min(2);
266            DY=DCoord_min(1);
267            for ipoint=1:siz(1)
268                xwidth=width/(abs(DX));
269                ywidth=width/(abs(DY));
270                i_min=round((ObjectData.Coord(ipoint,1)-Coord{2}(1))/DX+0.5-xwidth); %minimum index of the selected region
271                i_min=max(1,i_min);%restrict to field limit
272                i_plus=round((ObjectData.Coord(ipoint,1)-Coord{2}(1))/DX+0.5+xwidth);
273                i_plus=min(npxy(2),i_plus); %restrict to field limit
274                j_min=round((ObjectData.Coord(ipoint,2)-Coord{1}(1))/DY-ywidth+0.5);
275                j_min=max(1,j_min);
276                j_plus=round((ObjectData.Coord(ipoint,2)-Coord{1}(1))/DY+ywidth+0.5);
277                j_plus=min(npxy(1),j_plus);
278                ProjData.X(ipoint,1)=ObjectData.Coord(ipoint,1);
279                ProjData.Y(ipoint,1)=ObjectData.Coord(ipoint,2);
280                i_int=(i_min:i_plus);
281                j_int=(j_min:j_plus);
282                ProjData.NbVal(ipoint,1)=length(j_int)*length(i_int);
283                if isempty(i_int) || isempty(j_int)
284                   for ivar=VarIndex   
285                        eval(['ProjData.' FieldData.ListVarName{ivar} '(ipoint,:)=NaN;']);
286                   end
287                   errormsg=['no data points in the selected projection range ' num2str(width) ];
288                else
289                    %TODO: introduce circle in the selected subregion
290                    %[I,J]=meshgrid([1:j_int],[1:i_int]);
291                    for ivar=VarIndex   
292                        Avalue=FieldData.(FieldData.ListVarName{ivar})(j_int,i_int,:);
293                        ProjData.(FieldData.ListVarName{ivar})(ipoint,:)=mean(mean(Avalue));
294                    end
295                end
296            end
297        end
298   end
299end
300
301%-----------------------------------------------------------------
302%project in a patch
303function  [ProjData,errormsg]=proj_patch(FieldData,ObjectData)%%
304%-------------------------------------------------------------------
305[ProjData,errormsg]=proj_heading(FieldData,ObjectData);
306
307objectfield=fieldnames(ObjectData);
308widthx=0;
309widthy=0;
310if isfield(ObjectData,'RangeX')&~isempty(ObjectData.RangeX)
311    widthx=max(ObjectData.RangeX);
312end
313if isfield(ObjectData,'RangeY')&~isempty(ObjectData.RangeY)
314    widthy=max(ObjectData.RangeY);
315end
316
317%A REVOIR, GENERALISER: UTILISER proj_line
318ProjData.NbDim=1;
319ProjData.ListVarName={};
320ProjData.VarDimName={};
321ProjData.VarAttribute={};
322
323CoordMesh=zeros(1,numel(FieldData.ListVarName));
324if isfield (FieldData,'VarAttribute')
325    %ProjData.VarAttribute=FieldData.VarAttribute;%list of variable attribute names
326    for iattr=1:length(FieldData.VarAttribute)%initialization of variable attribute values
327%         ProjData.VarAttribute{iattr}={};
328        if isfield(FieldData.VarAttribute{iattr},'Unit')
329            unit{iattr}=FieldData.VarAttribute{iattr}.Unit;
330        end
331        if isfield(FieldData.VarAttribute{iattr},'CoordMesh')
332            CoordMesh(iattr)=FieldData.VarAttribute{iattr}.CoordMesh;
333        end
334    end
335end
336
337%group the variables (fields of 'FieldData') in cells of variables with the same dimensions
338[CellInfo,NbDim,errormsg]=find_field_cells(FieldData);
339if ~isempty(errormsg)
340    errormsg=['error in proj_field/proj_patch:' errormsg];
341    return
342end
343
344%LOOP ON GROUPS OF VARIABLES SHARING THE SAME DIMENSIONS
345for icell=1:length(CellInfo)
346    testX=0;
347    testY=0;
348    test_Amat=0;
349    if NbDim(icell)~=2% proj_patch acts only on fields of space dimension 2
350        continue
351    end
352    ivar_FF=[];
353    testfalse=isfield(CellInfo{icell},'VarIndex_errorflag');
354    if testfalse
355        ivar_FF=CellInfo{icell}.VarIndex_errorflag;
356        FFName=FieldData.ListVarName{ivar_FF};
357        errorflag=FieldData.(FFName);
358    end
359    % select types of  variables to be projected
360    ListProj={'VarIndex_scalar','VarIndex_image','VarIndex_color','VarIndex_vector_x','VarIndex_vector_y'};
361    check_proj=false(size(FieldData.ListVarName));
362    for ilist=1:numel(ListProj)
363        if isfield(CellInfo{icell},ListProj{ilist})
364            check_proj(CellInfo{icell}.(ListProj{ilist}))=1;
365        end
366    end
367    VarIndex=find(check_proj);
368   
369    ivar_X=CellInfo{icell}.CoordIndex(end);
370    ivar_Y=CellInfo{icell}.CoordIndex(end-1);
371    ivar_Z=[];
372    if NbDim(icell)==3
373        ivar_Z=CellInfo{icell}.CoordIndex(1);
374    end
375    if strcmp(CellInfo{icell}.CoordType,'scattered')%case of unstructured coordinates
376        %nbpoint=numel(FieldData.(FieldData.ListVarName{VarIndex(1)}));
377        for ivar=[VarIndex ivar_X ivar_Y ivar_FF]
378            VarName=FieldData.ListVarName{ivar};
379            FieldData.(VarName)=reshape(FieldData.(VarName),[],1);
380        end
381        XName=FieldData.ListVarName{ivar_X};
382        YName=FieldData.ListVarName{ivar_Y};
383        coord_x=FieldData.(XName);
384        coord_y=FieldData.(YName);
385    end
386    % image or 2D matrix
387    if  strcmp(CellInfo{icell}.CoordType,'grid')%case of structured coordinates
388        test_Amat=1;% test for image or 2D matrix
389        AYName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(end-1)};
390        AXName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(end)};
391        eval(['AX=FieldData.' AXName ';'])% x coordinate
392        eval(['AY=FieldData.' AYName ';'])% y coordinate
393        VarName=FieldData.ListVarName{VarIndex(1)};
394        DimValue=size(FieldData.(VarName));
395        if length(AX)==2
396            AX=linspace(AX(1),AX(end),DimValue(2));
397        end
398        if length(AY)==2
399            AY=linspace(AY(1),AY(end),DimValue(1));
400        end
401        if length(DimValue)==3
402            testcolor=1;
403            npxy(3)=3;
404        else
405            testcolor=0;
406            npxy(3)=1;
407        end
408        [Xi,Yi]=meshgrid(AX,AY);
409        npxy(1)=length(AY);
410        npxy(2)=length(AX);
411        Xi=reshape(Xi,npxy(1)*npxy(2),1);
412        Yi=reshape(Yi,npxy(1)*npxy(2),1);
413        for ivar=1:length(VarIndex)
414            VarName=FieldData.ListVarName{VarIndex(ivar)};
415            FieldData.(VarName)=reshape(FieldData.(VarName),npxy(1)*npxy(2),npxy(3)); % keep only non false vectors
416        end
417    end
418    %select the indices in the range of action
419    testin=[];%default
420    if isequal(ObjectData.Type,'rectangle')
421        if strcmp(CellInfo{icell}.CoordType,'scattered')
422            distX=abs(coord_x-ObjectData.Coord(1,1));
423            distY=abs(coord_y-ObjectData.Coord(1,2));
424            testin=distX<widthx & distY<widthy;
425        elseif test_Amat
426            distX=abs(Xi-ObjectData.Coord(1,1));
427            distY=abs(Yi-ObjectData.Coord(1,2));
428            testin=distX<widthx & distY<widthy;
429        end
430    elseif isequal(ObjectData.Type,'polygon')
431        if testX
432            testin=inpolygon(coord_x,coord_y,ObjectData.Coord(:,1),ObjectData.Coord(:,2));
433        elseif test_Amat
434            testin=inpolygon(Xi,Yi,ObjectData.Coord(:,1),ObjectData.Coord(:,2));
435        else%calculate the scalar
436            testin=[]; %A REVOIR
437        end
438    elseif isequal(ObjectData.Type,'ellipse')
439        X2Max=widthx*widthx;
440        Y2Max=(widthy)*(widthy);
441        if testX
442            distX=(coord_x-ObjectData.Coord(1,1));
443            distY=(coord_y-ObjectData.Coord(1,2));
444            testin=(distX.*distX/X2Max+distY.*distY/Y2Max)<1;
445        elseif test_Amat %case of usual 2x2 matrix
446            distX=(Xi-ObjectData.Coord(1,1));
447            distY=(Yi-ObjectData.Coord(1,2));
448            testin=(distX.*distX/X2Max+distY.*distY/Y2Max)<1;
449        end
450    end
451    %selected indices
452    if isequal(ObjectData.ProjMode,'outside')
453        testin=~testin;
454    end
455    if testfalse
456        testin=testin & (errorflag==0); % keep only non false vectors
457    end
458    indsel=find(testin);
459    for ivar=VarIndex
460        VarName=FieldData.ListVarName{ivar};
461        ProjData.([VarName 'Mean'])=mean(double(FieldData.(VarName)(indsel,:))); % take the mean in the selected region, for each color component
462        ProjData.([VarName 'Min'])=min(double(FieldData.(VarName)(indsel,:))); % take the min in the selected region , for each color component
463        ProjData.([VarName 'Max'])=max(double(FieldData.(VarName)(indsel,:))); % take the max in the selected region , for each color component
464        if isequal(CoordMesh(ivar),0)
465            [ProjData.([VarName 'Histo']),ProjData.(VarName)]=hist(double(FieldData.(VarName)(indsel,:,:)),100); % default histogram with 100 bins
466        else
467            ProjData.(VarName)=ProjData.([VarName 'Min'])+CoordMesh(ivar)/2:CoordMesh(ivar):ProjData.([VarName 'Max']); % list of bin values
468            ProjData.([VarName 'Histo'])=hist(double(FieldData.(VarName)(indsel,:)),ProjData.(VarName)); % histogram at predefined bin positions
469        end
470        ProjData.ListVarName=[ProjData.ListVarName {VarName} {[VarName 'Histo']} {[VarName 'Mean']} {[VarName 'Min']} {[VarName 'Max']}];
471        if test_Amat && testcolor
472            ProjData.VarDimName=[ProjData.VarDimName  {VarName} {{VarName,'rgb'}} {'rgb'} {'rgb'} {'rgb'}];%{{'nb_point','rgb'}};
473        else
474            ProjData.VarDimName=[ProjData.VarDimName {VarName} {VarName} {'one'} {'one'} {'one'}];
475        end
476        if isfield(FieldData,'VarAttribute')&& numel(FieldData.VarAttribute)>=ivar
477        ProjData.VarAttribute=[ProjData.VarAttribute FieldData.VarAttribute{ivar} {[]} {[]} {[]} {[]}];
478        end
479    end
480end
481
482
483%-----------------------------------------------------------------
484%project on a line
485% AJOUTER flux,circul,error
486% OUTPUT:
487% ProjData: projected field
488%
489function  [ProjData,errormsg] = proj_line(FieldData, ObjectData)
490%-----------------------------------------------------------------
491[ProjData,errormsg]=proj_heading(FieldData,ObjectData);%transfer global attributes
492if ~isempty(errormsg)
493    return
494end
495ProjData.NbDim=1;
496%initialisation of the input parameters and defaultoutput
497ProjMode=ObjectData.ProjMode;
498% ProjAngle=90; %90 degrees projection by default
499
500width=0;%default width of the projection band
501if isfield(ObjectData,'Range')&&size(ObjectData.Range,2)>=2
502    width=abs(ObjectData.Range(1,2));
503end
504if isfield(ObjectData,'RangeY')
505    width=max(ObjectData.RangeY);
506end
507
508% default output
509errormsg=[];%default
510Xline=[];
511flux=0;
512circul=0;
513liny=ObjectData.Coord(:,2);
514siz_line=size(ObjectData.Coord);
515if siz_line(1)<2
516    return% line needs at least 2 points to be defined
517end
518testfalse=0;
519ListIndex={};
520
521%% angles of the polyline and boundaries of action
522dlinx=diff(ObjectData.Coord(:,1));
523dliny=diff(ObjectData.Coord(:,2));
524theta=angle(dlinx+1i*dliny);%angle of each segment
525theta(siz_line(1))=theta(siz_line(1)-1);
526% determine a rectangles at +-width from the line (only used for the ProjMode='projection or 'interp_tps')
527xsup=zeros(1,siz_line(1)); xinf=zeros(1,siz_line(1)); ysup=zeros(1,siz_line(1)); yinf=zeros(1,siz_line(1));
528if isequal(ProjMode,'projection') || isequal(ProjMode,'interp_tps')
529    xsup(1)=ObjectData.Coord(1,1)-width*sin(theta(1));
530    xinf(1)=ObjectData.Coord(1,1)+width*sin(theta(1));
531    ysup(1)=ObjectData.Coord(1,2)+width*cos(theta(1));
532    yinf(1)=ObjectData.Coord(1,2)-width*cos(theta(1));
533    for ip=2:siz_line(1)
534        xsup(ip)=ObjectData.Coord(ip,1)-width*sin((theta(ip)+theta(ip-1))/2)/cos((theta(ip-1)-theta(ip))/2);
535        xinf(ip)=ObjectData.Coord(ip,1)+width*sin((theta(ip)+theta(ip-1))/2)/cos((theta(ip-1)-theta(ip))/2);
536        ysup(ip)=ObjectData.Coord(ip,2)+width*cos((theta(ip)+theta(ip-1))/2)/cos((theta(ip-1)-theta(ip))/2);
537        yinf(ip)=ObjectData.Coord(ip,2)-width*cos((theta(ip)+theta(ip-1))/2)/cos((theta(ip-1)-theta(ip))/2);
538    end
539end
540
541%% group the variables (fields of 'FieldData') in cells of variables with the same dimensions
542[CellInfo,NbDim,errormsg]=find_field_cells(FieldData);
543if ~isempty(errormsg)
544    errormsg=['error in proj_field/proj_line:' errormsg];
545    return
546end
547
548%% loop on variable cells with the same space dimension
549ProjData.ListVarName={};
550ProjData.VarDimName={};
551for icell=1:length(CellInfo)
552    if NbDim(icell)~=2% proj_line acts only on fields of space dimension 2, TODO: check 3D case
553        continue
554    end
555
556    % select types of  variables to be projected
557   ListProj={'VarIndex_scalar','VarIndex_image','VarIndex_color','VarIndex_vector_x','VarIndex_vector_y'};
558   check_proj=false(size(FieldData.ListVarName));
559   for ilist=1:numel(ListProj)
560       if isfield(CellInfo{icell},ListProj{ilist})
561           check_proj(CellInfo{icell}.(ListProj{ilist}))=1;
562       end
563   end
564   VarIndex=find(check_proj);
565
566    %identify vector components   
567    testU=isfield(CellInfo{icell},'VarIndex_vector_x') &&isfield(CellInfo{icell},'VarIndex_vector_y') ;% test for vectors
568    if testU
569        UName=FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_x};
570        VName=FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_y};
571        vector_x=FieldData.(UName);
572        vector_y=FieldData.(VName);
573    end 
574    %identify error flag
575    testfalse=isfield(CellInfo{icell},'VarIndex_errorflag');% test for error flag
576    if testfalse
577        FFName=FieldData.ListVarName{CellInfo{icell}.VarIndex_errorflag};
578        errorflag=FieldData.(FFName);
579    end   
580    % check needed object properties for unstructured positions (position given by the variables with role coord_x, coord_y
581    if strcmp(CellInfo{icell}.CoordType,'scattered')
582        if  ~isequal(ProjMode,'interp_lin')
583            if width==0
584                errormsg='range of the projection object is missing';
585                return     
586            else
587                lambda=2/(width*width); %smoothing factor used for interp_tps: weight exp(-2) at distance width from the line
588            end
589        end
590        if ~isequal(ProjMode,'projection')
591            if isfield(ObjectData,'DX')&~isempty(ObjectData.DX)
592                DX=abs(ObjectData.DX);%mesh of interpolation points along the line
593            else
594                errormsg='DX missing';
595                return
596            end
597        end
598        XName= FieldData.ListVarName{CellInfo{icell}.CoordIndex(end)};
599        YName= FieldData.ListVarName{CellInfo{icell}.CoordIndex(end-1)};
600        coord_x=FieldData.(XName);   
601        coord_y=FieldData.(YName);
602    end   
603    %initiate projection
604    for ivar=1:length(VarIndex)
605        ProjLine{ivar}=[];
606    end
607    XLine=[];
608    linelengthtot=0;
609
610%         circul=0;
611%         flux=0;
612  %%%%%%%  % A FAIRE CALCULER MEAN DES QUANTITES    %%%%%%
613   %case of unstructured coordinates
614    if strcmp(CellInfo{icell}.CoordType,'scattered') 
615        for ip=1:siz_line(1)-1     %Loop on the segments of the polyline
616            linelength=sqrt(dlinx(ip)*dlinx(ip)+dliny(ip)*dliny(ip)); 
617            %select the vector indices in the range of action
618            if testfalse
619                flagsel=(errorflag==0); % keep only non false vectors
620            else
621                flagsel=ones(size(coord_x));
622            end
623            if isequal(ProjMode,'projection') %|| isequal(ProjMode,'interp_tps')
624                flagsel=flagsel & ((coord_y -yinf(ip))*(xinf(ip+1)-xinf(ip))>(coord_x-xinf(ip))*(yinf(ip+1)-yinf(ip))) ...
625                & ((coord_y -ysup(ip))*(xsup(ip+1)-xsup(ip))<(coord_x-xsup(ip))*(ysup(ip+1)-ysup(ip))) ...
626                & ((coord_y -yinf(ip+1))*(xsup(ip+1)-xinf(ip+1))>(coord_x-xinf(ip+1))*(ysup(ip+1)-yinf(ip+1))) ...
627                & ((coord_y -yinf(ip))*(xsup(ip)-xinf(ip))<(coord_x-xinf(ip))*(ysup(ip)-yinf(ip)));
628            end
629            indsel=find(flagsel);%indsel =indices of good vectors
630            X_sel=coord_x(indsel);
631            Y_sel=coord_y(indsel);
632            nbvar=0;
633            for iselect=1:numel(VarIndex)-2*testU
634                VarName=FieldData.ListVarName{VarIndex(iselect)};
635                ProjVar{iselect}=FieldData.(VarName)(indsel);%scalar value
636            end   
637            if testU
638                ProjVar{numel(VarIndex)-1}=cos(theta(ip))*vector_x(indsel)+sin(theta(ip))*vector_y(indsel);% longitudinal component
639                ProjVar{numel(VarIndex)}=-sin(theta(ip))*vector_x(indsel)+cos(theta(ip))*vector_y(indsel);%transverse component         
640            end
641            if isequal(ProjMode,'projection')
642                sintheta=sin(theta(ip));
643                costheta=cos(theta(ip));
644                Xproj=(X_sel-ObjectData.Coord(ip,1))*costheta + (Y_sel-ObjectData.Coord(ip,2))*sintheta; %projection on the line
645                [Xproj,indsort]=sort(Xproj);
646                for ivar=1:numel(ProjVar)
647                    if ~isempty(ProjVar{ivar})
648                        ProjVar{ivar}=ProjVar{ivar}(indsort);
649                     end
650                end
651            elseif isequal(ProjMode,'interp_lin') %linear interpolation:
652                npoint=floor(linelength/DX)+1;% nbre of points in the profile (interval DX)
653                Xproj=linelength/(2*npoint):linelength/npoint:linelength-linelength/(2*npoint);
654                xreg=cos(theta(ip))*Xproj+ObjectData.Coord(ip,1);
655                yreg=sin(theta(ip))*Xproj+ObjectData.Coord(ip,2);
656                for ivar=1:numel(ProjVar)
657                     if ~isempty(ProjVar{ivar})
658                        ProjVar{ivar}=griddata_uvmat(X_sel,Y_sel,ProjVar{ivar},xreg,yreg);
659                     end
660                end
661            elseif isequal(ProjMode,'interp_tps') %filtering
662                npoint=floor(linelength/DX)+1;% nbre of points in the profile (interval DX)
663                Xproj=linelength/(2*npoint):linelength/npoint:linelength-linelength/(2*npoint);
664                siz=size(X_sel);
665                xregij=cos(theta(ip))*ones(siz(1),1)*Xproj+ObjectData.Coord(ip,1);
666                yregij=sin(theta(ip))*ones(siz(1),1)*Xproj+ObjectData.Coord(ip,2);
667                xij=X_sel*ones(1,npoint);
668                yij=Y_sel*ones(1,npoint);
669                Aij=exp(-lambda*((xij-xregij).*(xij-xregij)+(yij-yregij).*(yij-yregij)));
670                norm=Aij'*ones(siz(1),1);
671                for ivar=1:numel(ProjVar)
672                     if ~isempty(ProjVar{ivar})
673                        ProjVar{ivar}=Aij'*ProjVar{ivar}./norm;
674                     end
675                end             
676            end
677            %prolongate the total record
678            for ivar=1:numel(ProjVar)
679                  if ~isempty(ProjVar{ivar})
680                     ProjLine{ivar}=[ProjLine{ivar}; ProjVar{ivar}];
681                  end
682            end
683            XLine=[XLine ;(Xproj+linelengthtot)];%along line abscissa
684            linelengthtot=linelengthtot+linelength;
685            %     circul=circul+(sum(U_sel))*linelength/npoint;
686            %     flux=flux+(sum(V_sel))*linelength/npoint;
687        end
688        ProjData.X=XLine';
689        ProjData.ListVarName=[ProjData.ListVarName {XName}];
690        ProjData.VarDimName=[ProjData.VarDimName {XName}];
691        ProjData.VarAttribute{1}.long_name='abscissa along line';
692        for iselect=1:numel(VarIndex)
693            VarName=FieldData.ListVarName{VarIndex(iselect)};
694            eval(['ProjData.' VarName '=ProjLine{iselect};'])
695            ProjData.ListVarName=[ProjData.ListVarName {VarName}];
696            ProjData.VarDimName=[ProjData.VarDimName {XName}];
697            ProjData.VarAttribute{iselect}=FieldData.VarAttribute{VarIndex(iselect)};
698            if strcmp(ProjMode,'projection')
699                ProjData.VarAttribute{iselect}.Role='discrete';
700            else
701                 ProjData.VarAttribute{iselect}.Role='continuous';
702            end
703        end
704   
705    %case of structured coordinates
706    elseif strcmp(CellInfo{icell}.CoordType,'grid')
707        if ~isequal(ObjectData.Type,'line')% exclude polyline
708            errormsg=['no  projection available on ' ObjectData.Type 'for structured coordinates']; %
709        else
710            test_Amat=1;%image or 2D matrix
711            test_interp2=0;%default
712            AYName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(end-1)};
713            AXName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(end)};
714            eval(['AX=FieldData.' AXName ';']);% set of x positions
715            eval(['AY=FieldData.' AYName ';']);% set of y positions 
716            AName=FieldData.ListVarName{VarIndex(1)};
717            eval(['A=FieldData.' AName ';']);% scalar
718            npxy=size(A);
719            npx=npxy(2);
720            npy=npxy(1);
721            if numel(AX)==2
722                DX=(AX(2)-AX(1))/(npx-1);
723            else
724                DX_vec=diff(AX);
725                DX=max(DX_vec);
726                DX_min=min(DX_vec);
727                if (DX-DX_min)>0.0001*abs(DX)
728                    test_interp2=1;
729                    DX=DX_min;
730                end   
731            end
732            if numel(AY)==2
733                DY=(AY(2)-AY(1))/(npy-1);
734            else
735                DY_vec=diff(AY);
736                DY=max(DY_vec);
737                DY_min=min(DY_vec);
738                if (DY-DY_min)>0.0001*abs(DY)
739                   test_interp2=1;
740                    DY=DY_min;
741                end     
742            end             
743            AXI=linspace(AX(1),AX(end), npx);%set of  x  positions for the interpolated input data
744            AYI=linspace(AY(1),AY(end), npy);%set of  x  positions for the interpolated input data
745            if isfield(ObjectData,'DX')
746                DXY_line=ObjectData.DX;%mesh on the projection line
747            else
748                DXY_line=sqrt(abs(DX*DY));% mesh on the projection line
749            end
750            dlinx=ObjectData.Coord(2,1)-ObjectData.Coord(1,1);
751            dliny=ObjectData.Coord(2,2)-ObjectData.Coord(1,2);
752            linelength=sqrt(dlinx*dlinx+dliny*dliny);
753            theta=angle(dlinx+i*dliny);%angle of the line   
754            if isfield(FieldData,'RangeX')
755                XMin=min(FieldData.RangeX);%shift of the origin on the line
756            else
757                XMin=0;
758            end
759            eval(['ProjData.' AXName '=linspace(XMin,XMin+linelength,linelength/DXY_line+1);'])%abscissa of the new pixels along the line
760            y=linspace(-width,width,2*width/DXY_line+1);%ordintes of the new pixels (coordinate across the line)
761            eval(['npX=length(ProjData.' AXName ');'])
762            npY=length(y); %TODO: utiliser proj_grid
763            eval(['[X,Y]=meshgrid(ProjData.' AXName ',y);'])%grid in the line coordinates
764            XIMA=ObjectData.Coord(1,1)+(X-XMin)*cos(theta)-Y*sin(theta);
765            YIMA=ObjectData.Coord(1,2)+(X-XMin)*sin(theta)+Y*cos(theta);
766            XIMA=(XIMA-AX(1))/DX+1;%  index of the original image along x
767            YIMA=(YIMA-AY(1))/DY+1;% index of the original image along y
768            XIMA=reshape(round(XIMA),1,npX*npY);%indices reorganized in 'line'
769            YIMA=reshape(round(YIMA),1,npX*npY);
770            flagin=XIMA>=1 & XIMA<=npx & YIMA >=1 & YIMA<=npy;%flagin=1 inside the original image
771            ind_in=find(flagin);
772            ind_out=find(~flagin);
773            ICOMB=(XIMA-1)*npy+YIMA;
774            ICOMB=ICOMB(flagin);%index corresponding to XIMA and YIMA in the aligned original image vec_A
775            nbcolor=1; %color images
776            if numel(npxy)==2
777                nbcolor=1;
778            elseif length(npxy)==3
779                nbcolor=npxy(3);
780            else
781                errormsg='multicomponent field not projected';
782                display(errormsg)
783                return
784            end
785            nbvar=length(ProjData.ListVarName);% number of var from previous cells
786            ProjData.ListVarName=[ProjData.ListVarName {AXName}];
787            ProjData.VarDimName=[ProjData.VarDimName {AXName}];
788            for ivar=VarIndex
789                %VarName{ivar}=FieldData.ListVarName{ivar};
790                if test_interp2% interpolate on new grid
791                    FieldData.(FieldData.ListVarName{ivar})=interp2(FieldData.(AXName),FieldData.(AYName),FieldData.(FieldData.ListVarName{ivar}),AXI,AYI);%TO TEST
792                end
793                vec_A=reshape(squeeze(FieldData.(FieldData.ListVarName{ivar})),npx*npy,nbcolor); %put the original image in colum
794                if nbcolor==1
795                    vec_B(ind_in)=vec_A(ICOMB);
796                    vec_B(ind_out)=zeros(size(ind_out));
797                    A_out=reshape(vec_B,npY,npX);
798                    ProjData.(FieldData.ListVarName{ivar}) =sum(A_out,1)/npY;
799                elseif nbcolor==3
800                    vec_B(ind_in,1:3)=vec_A(ICOMB,:);
801                    vec_B(ind_out,1)=zeros(size(ind_out));
802                    vec_B(ind_out,2)=zeros(size(ind_out));
803                    vec_B(ind_out,3)=zeros(size(ind_out));
804                    A_out=reshape(vec_B,npY,npX,nbcolor);
805                    ProjData.(FieldData.ListVarName{ivar})=squeeze(sum(A_out,1)/npY);
806                end 
807                ProjData.ListVarName=[ProjData.ListVarName FieldData.ListVarName{ivar}];
808                ProjData.VarDimName=[ProjData.VarDimName {AXName}];%to generalize with the initial name of the x coordinate
809                ProjData.VarAttribute{ivar}.Role='continuous';% for plot with continuous line
810            end
811            if testU
812                 vector_x =ProjData.(FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_x});
813                 vector_y =ProjData.(FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_y});
814                 ProjData.(FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_x}) =cos(theta)*vector_x+sin(theta)*vector_y;
815                 ProjData.(FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_y}) =-sin(theta)*vector_x+cos(theta)*vector_y;
816            end
817            ProjData.VarAttribute{nbvar+1}.long_name='abscissa along line';
818            if nbcolor==3
819                ProjData.VarDimName{end}={AXName,'rgb'};
820            end
821        end
822    elseif strcmp(CellInfo{icell}.CoordType,'tps')
823         if isfield(ObjectData,'DX')&~isempty(ObjectData.DX)
824                DX=abs(ObjectData.DX);%mesh of interpolation points along the line
825                Xproj=linelength/(2*npoint):linelength/npoint:linelength-linelength/(2*npoint);
826                xreg=cos(theta(ip))*Xproj+ObjectData.Coord(ip,1)
827                yreg=sin(theta(ip))*Xproj+ObjectData.Coord(ip,2)
828%                 coord_x_proj=XMin:DX:XMax;
829%                 coord_y_proj=YMin:DY:YMax;
830                DataOut=calc_field_tps(FieldData.FieldList,FieldData,cat(3,xreg,yreg));
831                ProjData.ListVarName=[ProjData.ListVarName DataOut.ListVarName];
832                ProjData.VarDimName=[ProjData.VarDimName DataOut.VarDimName];
833                ProjData.VarAttribute=[ProjData.VarAttribute DataOut.VarAttribute];   
834                DataOut.ListVarName(1)=[];
835                DataOut.VarDimName(1)=[];
836                DataOut.VarAttribute(1)=[];
837                for ilist=2:length(DataOut.ListVarName)% reshape data, excluding coordinates (ilist=1-2), TODO: rationalise
838                    VarName=DataOut.ListVarName{ilist};
839                     ProjData.(VarName)=DataOut.(VarName);
840                end
841                ProjData.coord_x=Xproj;
842         end
843    end
844end
845
846% %shotarter case for horizontal or vertical line (A FAIRE
847% %     Rangx=[0.5 npx-0.5];%image coordiantes of corners
848% %     Rangy=[npy-0.5 0.5];
849% %     if isfield(Calib,'Pxcmx')&isfield(Calib,'Pxcmy')%old calib
850% %         Rangx=Rangx/Calib.Pxcmx;
851% %         Rangy=Rangy/Calib.Pxcmy;
852% %     else
853% %         [Rangx]=phys_XYZ(Calib,Rangx,[0.5 0.5],[0 0]);%case of translations without rotation and quadratic deformation
854% %         [xx,Rangy]=phys_XYZ(Calib,[0.5 0.5],Rangy,[0 0]);
855% %     end
856%
857% %     test_scal=0;%default% 3- 'UserData':(get(handles.Tag,'UserData')
858
859
860%-----------------------------------------------------------------
861%project on a plane
862% AJOUTER flux,circul,error
863function  [ProjData,errormsg] = proj_plane(FieldData, ObjectData)
864%-----------------------------------------------------------------
865
866%% rotation angles
867PlaneAngle=[0 0 0];
868norm_plane=[0 0 1];
869cos_om=1;
870sin_om=0;
871test90x=0;%=1 for 90 degree rotation alround x axis
872test90y=0;%=1 for 90 degree rotation alround y axis
873if isfield(ObjectData,'Angle')&& isequal(size(ObjectData.Angle),[1 3])&& ~isequal(ObjectData.Angle,[0 0 0])
874    test90y=isequal(ObjectData.Angle,[0 90 0]);
875    PlaneAngle=(pi/180)*ObjectData.Angle;
876    om=norm(PlaneAngle);%norm of rotation angle in radians
877    OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
878    cos_om=cos(om);
879    sin_om=sin(om);
880    coeff=OmAxis(3)*(1-cos_om);
881    %components of the unity vector norm_plane normal to the projection plane
882    norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
883    norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
884    norm_plane(3)=OmAxis(3)*coeff+cos_om;
885end
886testangle=~isequal(PlaneAngle,[0 0 0]);% && ~test90y && ~test90x;%=1 for slanted plane
887
888%% mesh sizes DX and DY
889DX=[];
890DY=[];%default
891if isfield(ObjectData,'DX') && ~isempty(ObjectData.DX)
892     DX=abs(ObjectData.DX);%mesh of interpolation points
893elseif isfield(FieldData,'CoordMesh')
894     DX=FieldData.CoordMesh;
895end
896if isfield(ObjectData,'DY') && ~isempty(ObjectData.DY)
897     DY=abs(ObjectData.DY);%mesh of interpolation points
898elseif isfield(FieldData,'CoordMesh')
899     DY=FieldData.CoordMesh;
900end
901if  ~strcmp(ObjectData.ProjMode,'projection') && (isempty(DX)||isempty(DY))
902        errormsg='DX or DY not defined';
903        return
904end
905
906%% extrema along each axis
907testXMin=0;
908testXMax=0;
909testYMin=0;
910testYMax=0;
911
912if isfield(ObjectData,'RangeX')
913        XMin=min(ObjectData.RangeX);
914        XMax=max(ObjectData.RangeX);
915        testXMin=XMax>XMin;
916        testXMax=1;% range restriction along X
917else
918    XMin=FieldData.XMin;%default
919XMax=FieldData.XMax;%default
920end
921if isfield(ObjectData,'RangeY')
922        YMin=min(ObjectData.RangeY);
923        YMax=max(ObjectData.RangeY);
924        testYMin=YMax>YMin;
925        testYMax=1;
926else
927    YMin=FieldData.YMin;%default
928YMax=FieldData.YMax;%default
929end
930width=0;%default width of the projection band
931if isfield(ObjectData,'RangeZ')
932        width=max(ObjectData.RangeZ);
933end
934
935%% initiate Matlab  structure for physical field
936[ProjData,errormsg]=proj_heading(FieldData,ObjectData);
937
938%% reproduce initial plane position and angle
939if isfield(FieldData,'PlaneCoord')&&length(FieldData.PlaneCoord)==3
940   if length(ProjData.ObjectCoord)==3% if the projection plane has a z coordinate
941       if ~isequal(ProjData.PlaneCoord(3),ProjData.ObjectCoord) %check the consistency with the z coordinate of the field plane (set by calibration)
942           errormsg='inconsistent z position for field and projection plane';
943           return
944       end
945   else % the z coordinate is set only by the field plane (by calibration)
946       ProjData.ObjectCoord(3)=FieldData.PlaneCoord(3);
947   end
948   if isfield(FieldData,'PlaneAngle')
949       if isfield(ProjData,'ObjectAngle')
950           if ~isequal(FieldData.PlaneAngle,ProjData.ObjectAngle) %check the consistency with the z coordinate of the field plane (set by calibration)
951           errormsg='inconsistent plane angle for field and projection plane';
952           return
953           end
954       else
955        ProjData.ObjectAngle=FieldData.PlaneAngle;
956       end
957    end
958end
959ProjData.NbDim=2;
960ProjData.ListVarName={};
961ProjData.VarDimName={};
962ProjData.VarAttribute={};
963if ~isempty(DX) && ~isempty(DY)
964    ProjData.CoordMesh=sqrt(DX*DY);%define typical data mesh, useful for mouse selection in plots
965elseif isfield(FieldData,'CoordMesh')
966    ProjData.CoordMesh=FieldData.CoordMesh;
967end
968error=0;%default
969flux=0;
970testfalse=0;
971ListIndex={};
972
973%% group the variables (fields of 'FieldData') in cells of variables with the same dimensions
974[CellInfo,NbDimArray,errormsg]=find_field_cells(FieldData);
975if ~isempty(errormsg)
976    errormsg=['error in proj_field/proj_plane:' errormsg];
977    return
978end
979
980%% projection modes
981check_grid=0;
982ProjMode=cell(size(CellInfo));
983for icell=1:numel(CellInfo)% TODO: recalculate coordinates here to get the bounds in the rotated coordinates
984    ProjMode{icell}=ObjectData.ProjMode;
985    if isfield(CellInfo{icell},'ProjModeRequest')
986        switch CellInfo{icell}.ProjModeRequest
987            case 'interp_lin'
988                ProjMode{icell}='interp_lin';
989            case 'interp_tps'
990                ProjMode{icell}='interp_tps';
991        end
992    end
993    if strcmp(ProjMode{icell},'interp_lin')||strcmp(ProjMode{icell},'interp_tps')
994        check_grid=1;
995    end
996end
997
998%% define the new coordinates in case of interpolation on a grid
999if check_grid% TODO: recalculate coordinates to get the bounds in the rotated coordinates
1000    ProjData.ListVarName={'coord_y','coord_x'};
1001    ProjData.VarDimName={'coord_y','coord_x'}; 
1002    ProjData.VarAttribute={[],[]};
1003    ProjData.coord_y=[YMin YMax];
1004    ProjData.coord_x=[XMin XMax];
1005end
1006
1007%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1008% LOOP ON GROUPS OF VARIABLES SHARING THE SAME DIMENSIONS
1009% CellVarIndex=cells of variable index arrays
1010ivar_new=0; % index of the current variable in the projected field
1011% icoord=0;
1012nbcoord=0;%number of added coordinate variables brought by projection
1013nbvar=0;
1014vector_x_proj=[];
1015vector_y_proj=[];
1016for icell=1:length(CellInfo)
1017    NbDim=NbDimArray(icell);
1018    if NbDim<2
1019        continue % only cells represnting 2D or 3D fields are involved
1020    end
1021    VarIndex=CellInfo{icell}.VarIndex;%  indices of the selected variables in the list FieldData.ListVarName
1022    ivar_U=[];ivar_V=[];ivar_W=[];
1023    if isfield(CellInfo{icell},'VarIndex_vector_x_tps')&&isfield(CellInfo{icell},'VarIndex_vector_y_tps')
1024        ivar_U=CellInfo{icell}.VarIndex_vector_x_tps;
1025        ivar_V=CellInfo{icell}.VarIndex_vector_y_tps;
1026    elseif isfield(CellInfo{icell},'VarIndex_vector_x')&&isfield(CellInfo{icell},'VarIndex_vector_y')
1027        ivar_U=CellInfo{icell}.VarIndex_vector_x;
1028        ivar_V=CellInfo{icell}.VarIndex_vector_y;
1029    end
1030    if isfield(CellInfo{icell},'VarIndex_vector_z')
1031        ivar_W=CellInfo{icell}.VarIndex_vector_z;
1032    end
1033    %dimensions
1034    DimCell=FieldData.VarDimName{VarIndex(1)};
1035    if ischar(DimCell)
1036        DimCell={DimCell};%name of dimensions
1037    end
1038    coord_z=0;%default
1039
1040    %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1041    switch CellInfo{icell}.CoordType
1042       
1043        %% case of input fields with unstructured coordinates
1044        case 'scattered'
1045            if strcmp(ProjMode{icell},'interp_tps')
1046                continue %skip for interp_tps (needs tps field cell)
1047            end
1048            coord_x=FieldData.(FieldData.ListVarName{CellInfo{icell}.CoordIndex(end)});% initial x coordinates
1049            coord_y=FieldData.(FieldData.ListVarName{CellInfo{icell}.CoordIndex(end-1)});% initial y coordinates
1050            check3D=(numel(CellInfo{icell}.CoordIndex)==3);
1051            if check3D
1052                coord_z=FieldData.(FieldData.ListVarName{CellInfo{icell}.CoordIndex(1)});
1053            end
1054           
1055            % translate  initial coordinates to account for the new origin
1056            coord_x=coord_x-ObjectData.Coord(1,1);
1057            coord_y=coord_y-ObjectData.Coord(1,2);
1058            if check3D
1059                coord_z=coord_z-ObjectData.Coord(1,3);
1060            end
1061           
1062            % selection of the vectors in the projection range (3D case)
1063            if check3D&&  width > 0
1064                %components of the unitiy vector normal to the projection plane
1065                fieldZ=norm_plane(1)*coord_x + norm_plane(2)*coord_y+ norm_plane(3)*coord_z;% distance to the plane
1066                indcut=find(abs(fieldZ) <= width);
1067                for ivar=VarIndex
1068                    VarName=FieldData.ListVarName{ivar};
1069                    eval(['FieldData.' VarName '=FieldData.' VarName '(indcut);'])
1070                    % A VOIR : CAS DE VAR STRUCTUREE MAIS PAS GRILLE REGULIERE : INTERPOLER SUR GRILLE REGULIERE
1071                end
1072                coord_x=coord_x(indcut);
1073                coord_y=coord_y(indcut);
1074                coord_z=coord_z(indcut);
1075            end
1076           
1077            %rotate coordinates if needed: coord_X,coord_Y= = coordinates in the new plane
1078            Psi=PlaneAngle(1);
1079            Theta=PlaneAngle(2);
1080            Phi=PlaneAngle(3);
1081            if testangle && ~test90y && ~test90x;%=1 for slanted plane
1082                coord_X=(coord_x *cos(Phi) + coord_y* sin(Phi));
1083                coord_Y=(-coord_x *sin(Phi) + coord_y *cos(Phi))*cos(Theta);
1084                coord_Y=coord_Y+coord_z *sin(Theta);
1085                coord_X=(coord_X *cos(Psi) - coord_Y* sin(Psi));%A VERIFIER               
1086                coord_Y=(coord_X *sin(Psi) + coord_Y* cos(Psi));
1087            else
1088                coord_X=coord_x;
1089                coord_Y=coord_y;
1090            end
1091           
1092            %restriction to the range of X and Y if imposed by the projection object
1093            testin=ones(size(coord_X)); %default
1094            testbound=0;
1095            if testXMin
1096                testin=testin & (coord_X >= XMin);
1097                testbound=1;
1098            end
1099            if testXMax
1100                testin=testin & (coord_X <= XMax);
1101                testbound=1;
1102            end
1103            if testYMin
1104                testin=testin & (coord_Y >= YMin);
1105                testbound=1;
1106            end
1107            if testYMin
1108                testin=testin & (coord_Y <= YMax);
1109                testbound=1;
1110            end
1111            if testbound
1112                indcut=find(testin);
1113                if isempty(indcut)
1114                    errormsg='data outside the bounds of the projection object';
1115                    return
1116                end
1117                for ivar=VarIndex
1118                    VarName=FieldData.ListVarName{ivar};
1119                    FieldData.(VarName)=FieldData.(VarName)(indcut);
1120                end
1121                coord_X=coord_X(indcut);
1122                coord_Y=coord_Y(indcut);
1123                if check3D
1124                    coord_Z=coord_Z(indcut);
1125                end
1126            end
1127           
1128            % different cases of projection
1129            switch ProjMode{icell}
1130                case 'projection' 
1131                    nbvar=numel(ProjData.ListVarName);
1132                    for ivar=VarIndex %transfer variables to the projection plane
1133                        VarName=FieldData.ListVarName{ivar};
1134                        if ivar==CellInfo{icell}.CoordIndex(end)
1135                            ProjData.(VarName)=coord_X;
1136                        elseif ivar==CellInfo{icell}.CoordIndex(end-1)  % y coordinate
1137                            ProjData.(VarName)=coord_Y;
1138                        elseif ~(check3D && ivar==CellInfo{icell}.CoordIndex(1)) % other variables (except Z coordinate wyhich is not reproduced)
1139                            ProjData.(VarName)=FieldData.(VarName);
1140                        end
1141                        if ~(check3D && ivar==CellInfo{icell}.CoordIndex(1))
1142                            ProjData.ListVarName=[ProjData.ListVarName VarName];
1143                            ProjData.VarDimName=[ProjData.VarDimName DimCell];
1144                            nbvar=nbvar+1;
1145                            if isfield(FieldData,'VarAttribute') && length(FieldData.VarAttribute) >=ivar
1146                                ProjData.VarAttribute{nbvar}=FieldData.VarAttribute{ivar};
1147                            end
1148                        end
1149                    end
1150                case 'interp_lin'%interpolate data on a regular grid
1151                    coord_x_proj=XMin:DX:XMax;
1152                    coord_y_proj=YMin:DY:YMax;
1153                    [XI,YI]=meshgrid(coord_x_proj,coord_y_proj);
1154                    if isfield(CellInfo{icell},'VarIndex_errorflag')
1155                        VarName_FF=FieldData.ListVarName{CellInfo{icell}.VarIndex_errorflag};
1156                        indsel=find(FieldData.(VarName_FF)==0);
1157                        coord_X=coord_X(indsel);
1158                        coord_Y=coord_Y(indsel);
1159                    end
1160%                     testFF=0;
1161%                     nbvar=numel(ProjData.ListVarName);
1162                    if isfield(CellInfo{icell},'VarIndex_vector_x')&&isfield(CellInfo{icell},'VarIndex_vector_y')
1163                        VarName_x=FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_x};
1164                        VarName_y=FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_y};
1165                        if isfield(CellInfo{icell},'VarIndex_errorflag')
1166                            FieldData.(VarName_x)=FieldData.(VarName_x)(indsel);
1167                            FieldData.(VarName_y)=FieldData.(VarName_y)(indsel);
1168                        end
1169                        %FieldVar=cat(2,FieldData.(VarName_x),FieldData.(VarName_y));
1170                        if ~isfield(CellInfo{icell},'CheckSub') || ~CellInfo{icell}.CheckSub
1171                            vector_x_proj=numel(ProjData.ListVarName)+1;
1172                            vector_y_proj=numel(ProjData.ListVarName)+2;
1173                        end
1174                    end
1175                    if isfield(CellInfo{icell},'VarIndex_scalar')
1176                        VarName_scalar=FieldData.ListVarName{CellInfo{icell}.VarIndex_scalar};
1177                        if isfield(CellInfo{icell},'errorflag') && ~isempty(CellInfo{icell}.errorflag)
1178                            FieldData.(VarName_scalar)=FieldData.(VarName_scalar)(indsel);
1179                        end
1180                    end
1181                    if isfield(CellInfo{icell},'VarIndex_ancillary')% do not project ancillary data with interp
1182                        FieldData=rmfield(FieldData,FieldData.ListVarName{CellInfo{icell}.VarIndex_ancillary});
1183                    end
1184                    if isfield(CellInfo{icell},'VarIndex_warnflag')% do not project ancillary data with interp
1185                        FieldData=rmfield(FieldData,FieldData.ListVarName{CellInfo{icell}.VarIndex_warnflag});
1186                    end
1187                    % interpolate and calculate field on the grid
1188                    [VarVal,ListFieldProj,VarAttribute,errormsg]=calc_field_interp([coord_X coord_Y],FieldData,CellInfo{icell}.FieldName,XI,YI);
1189                   
1190                    if isfield(CellInfo{icell},'CheckSub') && CellInfo{icell}.CheckSub && ~isempty(vector_x_proj)
1191                        ProjData.(ProjData.ListVarName{vector_x_proj})=ProjData.(ProjData.ListVarName{vector_x_proj})-VarVal{1};
1192                        ProjData.(ProjData.ListVarName{vector_y_proj})=ProjData.(ProjData.ListVarName{vector_y_proj})-VarVal{2};
1193                    else
1194                        VarDimName=cell(size(ListFieldProj));
1195                        for ilist=1:numel(ListFieldProj)% reshape data, excluding coordinates (ilist=1-2), TODO: rationalise
1196                            ListFieldProj{ilist}=regexprep(ListFieldProj{ilist},'(.+','');
1197                            if ~isempty(find(strcmp(ListFieldProj{ilist},ProjData.ListVarName)))
1198                                ListFieldProj{ilist}=[ListFieldProj{ilist} '_1'];
1199                            end                       
1200                            ProjData.(ListFieldProj{ilist})=VarVal{ilist};
1201                            VarDimName{ilist}={'coord_y','coord_x'};
1202                        end
1203                        ProjData.ListVarName=[ProjData.ListVarName ListFieldProj];
1204                        ProjData.VarDimName=[ProjData.VarDimName VarDimName];
1205                        ProjData.VarAttribute=[ProjData.VarAttribute VarAttribute];
1206                    end
1207            end
1208
1209            %% case of tps interpolation (applies only in interp_tps mode and for spatial derivatives)
1210        case 'tps'
1211            if strcmp(ProjMode{icell},'interp_tps')
1212                Coord=FieldData.(FieldData.ListVarName{CellInfo{icell}.CoordIndex});
1213                NbCentres=FieldData.(FieldData.ListVarName{CellInfo{icell}.NbCentres_tps});
1214                SubRange=FieldData.(FieldData.ListVarName{CellInfo{icell}.SubRange_tps});
1215                if isfield(CellInfo{icell},'VarIndex_vector_x_tps')&&isfield(CellInfo{icell},'VarIndex_vector_y_tps')
1216                    FieldVar=cat(3,FieldData.(FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_x_tps}),FieldData.(FieldData.ListVarName{CellInfo{icell}.VarIndex_vector_y_tps}));
1217                end
1218                coord_x_proj=XMin:DX:XMax;
1219                coord_y_proj=YMin:DY:YMax;
1220                np_x=numel(coord_x_proj);
1221                np_y=numel(coord_y_proj);
1222                [XI,YI]=meshgrid(coord_x_proj,coord_y_proj');
1223                XI=XI+ObjectData.Coord(1,1);
1224                YI=YI+ObjectData.Coord(1,2);
1225                [DataOut,VarAttribute,errormsg]=calc_field_tps(Coord,NbCentres,SubRange,FieldVar,CellInfo{icell}.FieldName,cat(3,XI,YI));   
1226                ListFieldProj=(fieldnames(DataOut))';
1227                VarDimName=cell(size(ListFieldProj));
1228                for ilist=1:numel(ListFieldProj)% reshape data, excluding coordinates (ilist=1-2), TODO: rationalise
1229                    VarName=ListFieldProj{ilist};
1230                    ProjData.(VarName)=DataOut.(VarName);
1231                    VarDimName{ilist}={'coord_y','coord_x'};
1232                end
1233                ProjData.ListVarName=[ProjData.ListVarName ListFieldProj];
1234                ProjData.VarDimName=[ProjData.VarDimName VarDimName];
1235                ProjData.VarAttribute=[ProjData.VarAttribute VarAttribute];
1236            end
1237           
1238            %% case of input fields defined on a structured  grid
1239        case 'grid'         
1240            VarName=FieldData.ListVarName{VarIndex(1)};%get the first variable of the cell to get the input matrix dimensions
1241            DimValue=size(FieldData.(VarName));%input matrix dimensions
1242            DimValue(DimValue==1)=[];%remove singleton dimensions
1243            NbDim=numel(DimValue);%update number of space dimensions
1244            nbcolor=1; %default number of 'color' components: third matrix index without corresponding coordinate
1245            if NbDim>=3
1246                if NbDim>3
1247                    errormsg='matrices with more than 3 dimensions not handled';
1248                    return
1249                else
1250                    if numel(CellInfo{icell}.CoordIndex)==2% the third matrix dimension does not correspond to a space coordinate
1251                        nbcolor=DimValue(3);
1252                        DimValue(3)=[]; %number of 'color' components updated
1253                        NbDim=2;% space dimension set to 2
1254                    end
1255                end
1256            end
1257            AYName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(NbDim-1)};%name of input x coordinate (name preserved on projection)
1258            AXName=FieldData.ListVarName{CellInfo{icell}.CoordIndex(NbDim)};%name of input y coordinate (name preserved on projection)
1259            if testangle% TODO modify name also in case of origin shift in x or y
1260                AYProjName='Y';
1261                AXProjName='X';
1262                count=0;
1263                %modify coordinate names if they are already used
1264                while ~(isempty(find(strcmp('AXName',ProjData.ListVarName),1)) && isempty(find(strcmp('AYName',ProjData.ListVarName),1)))
1265                    count=count+1;
1266                    AYProjName=[AYProjName '_' num2str(count)];
1267                    AXProjName=[AXProjName '_' num2str(count)];
1268                end
1269            else
1270                AYProjName=AYName;% (name preserved on projection)
1271                AXProjName=AXName;%name of input y coordinate (name preserved on projection)
1272            end
1273            ListDimName=FieldData.VarDimName{VarIndex(1)};
1274            ProjData.ListVarName=[ProjData.ListVarName {AYProjName} {AXProjName}]; %TODO: check if it already exists in Projdata (several cells)
1275            ProjData.VarDimName=[ProjData.VarDimName {AYProjName} {AXProjName}];
1276            ProjData.VarAttribute=[ProjData.VarAttribute {[]} {[]}];
1277            Coord_z=[];
1278            Coord_y=[];
1279            Coord_x=[];     
1280            for idim=1:NbDim %loop on space dimensions
1281                test_interp(idim)=0;%test for coordiate interpolation (non regular grid), =0 by default
1282                ivar=CellInfo{icell}.CoordIndex(idim);% index of the variable corresponding to the current dimension
1283                if ~isequal(ivar,0)%  a variable corresponds to the dimension #idim
1284                    Coord{idim}=FieldData.(FieldData.ListVarName{ivar});% coord values for the input field
1285                    if numel(Coord{idim})==2 %input array defined on a regular grid
1286                        DCoord_min(idim)=(Coord{idim}(2)-Coord{idim}(1))/DimValue(idim);
1287                    else
1288                        DCoord=diff(Coord{idim});%array of coordinate derivatives for the input field
1289                        DCoord_min(idim)=min(DCoord);
1290                        DCoord_max=max(DCoord);
1291                        if abs(DCoord_max-DCoord_min(idim))>abs(DCoord_max/1000)
1292                            msgbox_uvmat('ERROR',['non monotonic dimension variable # ' num2str(idim)  ' in proj_field.m'])
1293                            return
1294                        end
1295                        test_interp(idim)=(DCoord_max-DCoord_min(idim))> 0.0001*abs(DCoord_max);% test grid regularity
1296                    end
1297                    test_direct(idim)=(DCoord_min(idim)>0);
1298                else  % no variable associated with the  dimension #idim, the coordinate value is set equal to the matrix index by default
1299                    Coord_i_str=['Coord_' num2str(idim)];
1300                    DCoord_min(idim)=1;%default
1301                    Coord{idim}=[0.5 DimValue(idim)-0.5];
1302                    test_direct(idim)=1;
1303                end
1304            end
1305            if isempty(DY)
1306                DY=abs(DCoord_min(NbDim-1));
1307            end
1308            npY=1+round(abs(Coord{NbDim-1}(end)-Coord{NbDim-1}(1))/DY);%nbre of points after interpol
1309            if isempty(DX)
1310                DX=abs(DCoord_min(NbDim));
1311            end
1312            npX=1+round(abs(Coord{NbDim}(end)-Coord{NbDim}(1))/DX);%nbre of points after interpol
1313            for idim=1:NbDim
1314                if test_interp(idim)
1315                    DimValue(idim)=1+round(abs(Coord{idim}(end)-Coord{idim}(1))/abs(DCoord_min(idim)));%nbre of points after possible interpolation on a regular gri
1316                end
1317            end
1318            Coord_y=linspace(Coord{NbDim-1}(1),Coord{NbDim-1}(end),npY);
1319            test_direct_y=test_direct(NbDim-1);
1320            Coord_x=linspace(Coord{NbDim}(1),Coord{NbDim}(end),npX);
1321            test_direct_x=test_direct(NbDim);
1322            DAX=DCoord_min(NbDim);
1323            DAY=DCoord_min(NbDim-1);
1324            minAX=min(Coord_x);
1325            maxAX=max(Coord_x);
1326            minAY=min(Coord_y);
1327            maxAY=max(Coord_y);
1328            xcorner=[minAX maxAX minAX maxAX]-ObjectData.Coord(1,1);
1329            ycorner=[maxAY maxAY minAY minAY]-ObjectData.Coord(1,2);
1330            xcor_new=xcorner*cos_om+ycorner*sin_om;%coord new frame
1331            ycor_new=-xcorner*sin_om+ycorner*cos_om;
1332            if ~testXMax
1333                XMax=max(xcor_new);
1334            end
1335            if ~testXMin
1336                XMin=min(xcor_new);
1337            end
1338            if ~testYMax
1339                YMax=max(ycor_new);
1340            end
1341            if ~testYMin
1342                YMin=min(ycor_new);
1343            end
1344            DXinit=(maxAX-minAX)/(DimValue(NbDim)-1);
1345            DYinit=(maxAY-minAY)/(DimValue(NbDim-1)-1);
1346            if DX==0
1347                DX=DXinit;
1348            end
1349            if DY==0
1350                DY=DYinit;
1351            end
1352            if NbDim==3
1353                DZ=(Coord{1}(end)-Coord{1}(1))/(DimValue(1)-1);
1354                if ~test_direct(1)
1355                    DZ=-DZ;
1356                end
1357                Coord_z=linspace(Coord{1}(1),Coord{1}(end),DimValue(1));
1358                test_direct_z=test_direct(1);
1359            end
1360            npX=floor((XMax-XMin)/DX+1);
1361            npY=floor((YMax-YMin)/DY+1);
1362            if test_direct_y
1363                coord_y_proj=linspace(YMin,YMax,npY);%abscissa of the new pixels along the line
1364            else
1365                coord_y_proj=linspace(YMax,YMin,npY);%abscissa of the new pixels along the line
1366            end
1367            if test_direct_x
1368                coord_x_proj=linspace(XMin,XMax,npX);%abscissa of the new pixels along the line
1369            else
1370                coord_x_proj=linspace(XMax,XMin,npX);%abscissa of the new pixels along the line
1371            end
1372            % case with no interpolation
1373            if isequal(ProjMode{icell},'projection') && (~testangle || test90y || test90x)
1374                if  NbDim==2 && ~testXMin && ~testXMax && ~testYMin && ~testYMax% no range restriction
1375                    ProjData.ListVarName=[ProjData.ListVarName FieldData.ListVarName(VarIndex)];
1376                    ProjData.VarDimName=[ProjData.VarDimName FieldData.VarDimName(VarIndex)]; 
1377                    if isfield(FieldData,'VarAttribute')
1378                    ProjData.VarAttribute=[ProjData.VarAttribute FieldData.VarAttribute(VarIndex)];
1379                    end
1380                    ProjData.(AYProjName)=FieldData.(AYName);
1381                    ProjData.(AXProjName)=FieldData.(AXName);
1382                    for ivar=VarIndex
1383                        VarName=FieldData.ListVarName{ivar};
1384                        ProjData.(VarName)=FieldData.(VarName);% no change by projection
1385                    end
1386                else
1387                    indY=NbDim-1;
1388                    if test_direct(indY)
1389                        min_indy=ceil((YMin-Coord{indY}(1))/DYinit)+1;
1390                        max_indy=floor((YMax-Coord{indY}(1))/DYinit)+1;
1391                        Ybound(1)=Coord{indY}(1)+DYinit*(min_indy-1);
1392                        Ybound(2)=Coord{indY}(1)+DYinit*(max_indy-1);
1393                    else
1394                        min_indy=ceil((Coord{indY}(1)-YMax)/DYinit)+1;
1395                        max_indy=floor((Coord{indY}(1)-YMin)/DYinit)+1;
1396                        Ybound(2)=Coord{indY}(1)-DYinit*(max_indy-1);
1397                        Ybound(1)=Coord{indY}(1)-DYinit*(min_indy-1);
1398                    end
1399                    if test_direct(NbDim)==1
1400                        min_indx=ceil((XMin-Coord{NbDim}(1))/DXinit)+1;
1401                        max_indx=floor((XMax-Coord{NbDim}(1))/DXinit)+1;
1402                        Xbound(1)=Coord{NbDim}(1)+DXinit*(min_indx-1);
1403                        Xbound(2)=Coord{NbDim}(1)+DXinit*(max_indx-1);
1404                    else
1405                        min_indx=ceil((Coord{NbDim}(1)-XMax)/DXinit)+1;
1406                        max_indx=floor((Coord{NbDim}(1)-XMin)/DXinit)+1;
1407                        Xbound(2)=Coord{NbDim}(1)+DXinit*(max_indx-1);
1408                        Xbound(1)=Coord{NbDim}(1)+DXinit*(min_indx-1);
1409                    end
1410                    min_indy=max(min_indy,1);% deals with margin (bound lower than the first index)
1411                    min_indx=max(min_indx,1);                 
1412                    if test90y
1413                        ind_new=[3 2 1];
1414                        DimCell={AYProjName,AXProjName};
1415                        iz=ceil((ObjectData.Coord(1,1)-Coord{3}(1))/DX)+1;
1416                        for ivar=VarIndex
1417                            VarName=FieldData.ListVarName{ivar};
1418                            ProjData.ListVarName=[ProjData.ListVarName VarName];
1419                            ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
1420                            ProjData.VarAttribute{length(ProjData.ListVarName)}=FieldData.VarAttribute{ivar}; %reproduce the variable attributes
1421                            eval(['ProjData.' VarName '=permute(FieldData.' VarName ',ind_new);'])% permute x and z indices for 90 degree rotation
1422                            eval(['ProjData.' VarName '=squeeze(ProjData.' VarName '(iz,:,:));'])% select the z index iz
1423                        end
1424                        eval(['ProjData.' AYProjName '=[Ybound(1) Ybound(2)];']) %record the new (projected ) y coordinates
1425                        eval(['ProjData.' AXProjName '=[Coord{1}(end),Coord{1}(1)];']) %record the new (projected ) x coordinates
1426                    else
1427                        if NbDim==3
1428                            DimCell(1)=[]; %suppress z variable
1429                            DimValue(1)=[];
1430                            if test_direct(1)
1431                                iz=ceil((ObjectData.Coord(1,3)-Coord{1}(1))/DZ)+1;
1432                            else
1433                                iz=ceil((Coord{1}(1)-ObjectData.Coord(1,3))/DZ)+1;
1434                            end
1435                        end
1436                        max_indy=min(max_indy,DimValue(1));%introduce bounds in y and x indices
1437                        max_indx=min(max_indx,DimValue(2));
1438                        for ivar=VarIndex% loop on non coordinate variables
1439                            VarName=FieldData.ListVarName{ivar};
1440                            ProjData.ListVarName=[ProjData.ListVarName VarName];
1441                            ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
1442                            if isfield(FieldData,'VarAttribute') && length(FieldData.VarAttribute)>=ivar
1443                                ProjData.VarAttribute{length(ProjData.ListVarName)}=FieldData.VarAttribute{ivar};
1444                            end
1445                            if NbDim==3
1446                                eval(['ProjData.' VarName '=squeeze(FieldData.' VarName '(iz,min_indy:max_indy,min_indx:max_indx));']);
1447                            else
1448                                eval(['ProjData.' VarName '=FieldData.' VarName '(min_indy:max_indy,min_indx:max_indx,:);']);
1449                            end
1450                        end
1451                        eval(['ProjData.' AYProjName '=[Ybound(1) Ybound(2)];']) %record the new (projected ) y coordinates
1452                        eval(['ProjData.' AXProjName '=[Xbound(1) Xbound(2)];']) %record the new (projected ) x coordinates
1453                    end
1454                end
1455            else       % case with rotation and/or interpolation
1456                if NbDim==2 %2D case
1457                    [X,Y]=meshgrid(coord_x_proj,coord_y_proj);%grid in the new coordinates
1458                    XIMA=ObjectData.Coord(1,1)+(X)*cos(PlaneAngle(3))-Y*sin(PlaneAngle(3));%corresponding coordinates in the original image
1459                    YIMA=ObjectData.Coord(1,2)+(X)*sin(PlaneAngle(3))+Y*cos(PlaneAngle(3));
1460                    XIMA=(XIMA-minAX)/DXinit+1;% image index along x
1461                    YIMA=(-YIMA+maxAY)/DYinit+1;% image index along y
1462                    XIMA=reshape(round(XIMA),1,npX*npY);%indices reorganized in 'line'
1463                    YIMA=reshape(round(YIMA),1,npX*npY);
1464                    flagin=XIMA>=1 & XIMA<=DimValue(2) & YIMA >=1 & YIMA<=DimValue(1);%flagin=1 inside the original image
1465                    if isequal(ProjMode{icell},'interp_tps')
1466                        npx_interp_tps=ceil(abs(DX/DAX));
1467                        npy_interp_tps=ceil(abs(DY/DAY));
1468                        Minterp_tps=ones(npy_interp_tps,npx_interp_tps)/(npx_interp_tps*npy_interp_tps);
1469                        test_interp_tps=1;
1470                    else
1471                        test_interp_tps=0;
1472                    end
1473                    eval(['ProjData.' AYName '=[coord_y_proj(1) coord_y_proj(end)];']) %record the new (projected ) y coordinates
1474                    eval(['ProjData.' AXName '=[coord_x_proj(1) coord_x_proj(end)];']) %record the new (projected ) x coordinates
1475                    for ivar=VarIndex
1476                        VarName=FieldData.ListVarName{ivar};
1477                        if test_interp(1) || test_interp(2)%interpolate on a regular grid
1478                            eval(['ProjData.' VarName '=interp2(Coord{2},Coord{1},FieldData.' VarName ',Coord_x,Coord_y'');']) %TO TEST
1479                        end
1480                        eval(['vec_A=reshape(FieldData.' VarName ',[],nbcolor);'])%put the original image in line
1481                        %ind_in=find(flagin);
1482                        ind_out=find(~flagin);
1483                        ICOMB=(XIMA-1)*DimValue(1)+YIMA;
1484                        ICOMB=ICOMB(flagin);%index corresponding to XIMA and YIMA in the aligned original image vec_A
1485                        vec_B(flagin,1:nbcolor)=vec_A(ICOMB,:);
1486                        for icolor=1:nbcolor
1487                            vec_B(ind_out,icolor)=zeros(size(ind_out));
1488                        end
1489                        ProjData.ListVarName=[ProjData.ListVarName VarName];
1490                        ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
1491                        if isfield(FieldData,'VarAttribute')&&length(FieldData.VarAttribute)>=ivar
1492                            ProjData.VarAttribute{length(ProjData.ListVarName)+nbcoord}=FieldData.VarAttribute{ivar};
1493                        end
1494                        eval(['ProjData.' VarName '=reshape(vec_B,npY,npX,nbcolor);']);
1495                    end
1496                    ProjData.FF=reshape(~flagin,npY,npX);%false flag A FAIRE: tenir compte d'un flga antï¿œrieur
1497                    ProjData.ListVarName=[ProjData.ListVarName 'FF'];
1498                    ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
1499                    ProjData.VarAttribute{length(ProjData.ListVarName)}.Role='errorflag';
1500                elseif ~testangle
1501                    % unstructured z coordinate
1502                    test_sup=(Coord{1}>=ObjectData.Coord(1,3));
1503                    iz_sup=find(test_sup);
1504                    iz=iz_sup(1);
1505                    if iz>=1 & iz<=npz
1506                        %ProjData.ListDimName=[ProjData.ListDimName ListDimName(2:end)];
1507                        %ProjData.DimValue=[ProjData.DimValue npY npX];
1508                        for ivar=VarIndex
1509                            VarName=FieldData.ListVarName{ivar};
1510                            ProjData.ListVarName=[ProjData.ListVarName VarName];
1511                            ProjData.VarAttribute{length(ProjData.ListVarName)}=FieldData.VarAttribute{ivar}; %reproduce the variable attributes
1512                            eval(['ProjData.' VarName '=squeeze(FieldData.' VarName '(iz,:,:));'])% select the z index iz
1513                            %TODO : do a vertical average for a thick plane
1514                            if test_interp(2) || test_interp(3)
1515                                eval(['ProjData.' VarName '=interp2(Coord{3},Coord{2},ProjData.' VarName ',Coord_x,Coord_y'');'])
1516                            end
1517                        end
1518                    end
1519                else
1520                    errormsg='projection of structured coordinates on oblique plane not yet implemented';
1521                    %TODO: use interp_lin3
1522                    return
1523                end
1524            end
1525    end
1526   
1527    %% projection of  velocity components in the rotated coordinates
1528    if testangle && length(ivar_U)==1
1529        if isempty(ivar_V)
1530            msgbox_uvmat('ERROR','v velocity component missing in proj_field.m')
1531            return
1532        end
1533        UName=FieldData.ListVarName{ivar_U};
1534        VName=FieldData.ListVarName{ivar_V};
1535        eval(['ProjData.' UName  '=cos(PlaneAngle(3))*ProjData.' UName '+ sin(PlaneAngle(3))*ProjData.' VName ';'])
1536        eval(['ProjData.' VName  '=cos(Theta)*(-sin(PlaneAngle(3))*ProjData.' UName '+ cos(PlaneAngle(3))*ProjData.' VName ');'])
1537        if ~isempty(ivar_W)
1538            WName=FieldData.ListVarName{ivar_W};
1539            eval(['ProjData.' VName '=ProjData.' VName '+ ProjData.' WName '*sin(Theta);'])%
1540            eval(['ProjData.' WName '=NormVec_X*ProjData.' UName '+ NormVec_Y*ProjData.' VName '+ NormVec_Z* ProjData.' WName ';']);
1541        end
1542        if ~isequal(Psi,0)
1543            eval(['ProjData.' UName '=cos(Psi)* ProjData.' UName '- sin(Psi)*ProjData.' VName ';']);
1544            eval(['ProjData.' VName '=sin(Psi)* ProjData.' UName '+ cos(Psi)*ProjData.' VName ';']);
1545        end
1546    end
1547end
1548
1549% %prepare substraction in case of two input fields
1550% SubData.ListVarName={};
1551% SubData.VarDimName={};
1552% SubData.VarAttribute={};
1553% check_remove=zeros(size(ProjData.ListVarName));
1554% for iproj=1:numel(ProjData.VarAttribute)
1555%     if isfield(ProjData.VarAttribute{iproj},'CheckSub')&&isequal(ProjData.VarAttribute{iproj}.CheckSub,1)
1556%         VarName=ProjData.ListVarName{iproj};
1557%         SubData.ListVarName=[SubData.ListVarName {VarName}];
1558%         SubData.VarDimName=[SubData.VarDimName ProjData.VarDimName{iproj}];
1559%         SubData.VarAttribute=[SubData.VarAttribute ProjData.VarAttribute{iproj}];
1560%         SubData.(VarName)=ProjData.(VarName);
1561%         check_remove(iproj)=1;       
1562%     end
1563% end
1564% if ~isempty(find(check_remove))
1565%     ind_remove=find(check_remove);
1566%     ProjData.ListVarName(ind_remove)=[];
1567%     ProjData.VarDimName(ind_remove)=[];
1568%     ProjData.VarAttribute(ind_remove)=[];
1569%     ProjData=sub_field(ProjData,[],SubData);
1570% end   
1571
1572%-----------------------------------------------------------------
1573%projection in a volume
1574 function  [ProjData,errormsg] = proj_volume(FieldData, ObjectData)
1575%-----------------------------------------------------------------
1576ProjData=FieldData;%default output
1577
1578%% axis origin
1579if isempty(ObjectData.Coord)
1580    ObjectData.Coord(1,1)=0;%origin of the plane set to [0 0] by default
1581    ObjectData.Coord(1,2)=0;
1582    ObjectData.Coord(1,3)=0;
1583end
1584
1585%% rotation angles
1586VolumeAngle=[0 0 0];
1587norm_plane=[0 0 1];
1588if isfield(ObjectData,'Angle')&& isequal(size(ObjectData.Angle),[1 3])&& ~isequal(ObjectData.Angle,[0 0 0])
1589    PlaneAngle=ObjectData.Angle;
1590    VolumeAngle=ObjectData.Angle;
1591    om=norm(VolumeAngle);%norm of rotation angle in radians
1592    OmAxis=VolumeAngle/om; %unit vector marking the rotation axis
1593    cos_om=cos(pi*om/180);
1594    sin_om=sin(pi*om/180);
1595    coeff=OmAxis(3)*(1-cos_om);
1596    %components of the unity vector norm_plane normal to the projection plane
1597    norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
1598    norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
1599    norm_plane(3)=OmAxis(3)*coeff+cos_om;
1600end
1601testangle=~isequal(VolumeAngle,[0 0 0]);
1602
1603%% mesh sizes DX, DY, DZ
1604DX=0;
1605DY=0; %default
1606DZ=0;
1607if isfield(ObjectData,'DX')&~isempty(ObjectData.DX)
1608     DX=abs(ObjectData.DX);%mesh of interpolation points
1609end
1610if isfield(ObjectData,'DY')&~isempty(ObjectData.DY)
1611     DY=abs(ObjectData.DY);%mesh of interpolation points
1612end
1613if isfield(ObjectData,'DZ')&~isempty(ObjectData.DZ)
1614     DZ=abs(ObjectData.DZ);%mesh of interpolation points
1615end
1616if  ~strcmp(ProjMode,'projection') && (DX==0||DY==0||DZ==0)
1617        errormsg='grid mesh DX , DY or DZ is missing';
1618        return
1619end
1620
1621%% extrema along each axis
1622testXMin=0;
1623testXMax=0;
1624testYMin=0;
1625testYMax=0;
1626if isfield(ObjectData,'RangeX')
1627        XMin=min(ObjectData.RangeX);
1628        XMax=max(ObjectData.RangeX);
1629        testXMin=XMax>XMin;
1630        testXMax=1;
1631end
1632if isfield(ObjectData,'RangeY')
1633        YMin=min(ObjectData.RangeY);
1634        YMax=max(ObjectData.RangeY);
1635        testYMin=YMax>YMin;
1636        testYMax=1;
1637end
1638width=0;%default width of the projection band
1639if isfield(ObjectData,'RangeZ')
1640        ZMin=min(ObjectData.RangeZ);
1641        ZMax=max(ObjectData.RangeZ);
1642        testZMin=ZMax>ZMin;
1643        testZMax=1;
1644end
1645
1646%% initiate Matlab  structure for physical field
1647[ProjData,errormsg]=proj_heading(FieldData,ObjectData);
1648ProjData.NbDim=3;
1649ProjData.ListVarName={};
1650ProjData.VarDimName={};
1651if ~isequal(DX,0)&& ~isequal(DY,0)
1652    ProjData.CoordMesh=sqrt(DX*DY);%define typical data mesh, useful for mouse selection in plots
1653elseif isfield(FieldData,'CoordMesh')
1654    ProjData.CoordMesh=FieldData.CoordMesh;
1655end
1656
1657error=0;%default
1658flux=0;
1659testfalse=0;
1660ListIndex={};
1661
1662%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
1663%% group the variables (fields of 'FieldData') in cells of variables with the same dimensions
1664%-----------------------------------------------------------------
1665idimvar=0;
1666% LOOP ON GROUPS OF VARIABLES SHARING THE SAME DIMENSIONS
1667% CellVarIndex=cells of variable index arrays
1668ivar_new=0; % index of the current variable in the projected field
1669icoord=0;
1670nbcoord=0;%number of added coordinate variables brought by projection
1671nbvar=0;
1672for icell=1:length(CellVarIndex)
1673    NbDim=NbDimVec(icell);
1674    if NbDim<3
1675        continue
1676    end
1677    VarIndex=CellVarIndex{icell};%  indices of the selected variables in the list FieldData.ListVarName
1678    VarType=VarTypeCell{icell};
1679    ivar_X=VarType.coord_x;
1680    ivar_Y=VarType.coord_y;
1681    ivar_Z=VarType.coord_z;
1682    ivar_U=VarType.vector_x;
1683    ivar_V=VarType.vector_y;
1684    ivar_W=VarType.vector_z;
1685    ivar_C=VarType.scalar ;
1686    ivar_Anc=VarType.ancillary;
1687    test_anc=zeros(size(VarIndex));
1688    test_anc(ivar_Anc)=ones(size(ivar_Anc));
1689    ivar_F=VarType.warnflag;
1690    ivar_FF=VarType.errorflag;
1691    check_unstructured_coord=~isempty(ivar_X) && ~isempty(ivar_Y);
1692    DimCell=FieldData.VarDimName{VarIndex(1)};
1693    if ischar(DimCell)
1694        DimCell={DimCell};%name of dimensions
1695    end
1696
1697%% case of input fields with unstructured coordinates
1698    if check_unstructured_coord
1699        XName=FieldData.ListVarName{ivar_X};
1700        YName=FieldData.ListVarName{ivar_Y};
1701        eval(['coord_x=FieldData.' XName ';'])
1702        eval(['coord_y=FieldData.' YName ';'])
1703        if length(ivar_Z)==1
1704            ZName=FieldData.ListVarName{ivar_Z};
1705            eval(['coord_z=FieldData.' ZName ';'])
1706        end
1707
1708        % translate  initial coordinates
1709        coord_x=coord_x-ObjectData.Coord(1,1);
1710        coord_y=coord_y-ObjectData.Coord(1,2);
1711        if ~isempty(ivar_Z)
1712            coord_z=coord_z-ObjectData.Coord(1,3);
1713        end
1714       
1715        % selection of the vectors in the projection range
1716%         if length(ivar_Z)==1 &&  width > 0
1717%             %components of the unitiy vector normal to the projection plane
1718%             fieldZ=NormVec_X*coord_x + NormVec_Y*coord_y+ NormVec_Z*coord_z;% distance to the plane           
1719%             indcut=find(abs(fieldZ) <= width);
1720%             for ivar=VarIndex
1721%                 VarName=FieldData.ListVarName{ivar};
1722%                 eval(['FieldData.' VarName '=FieldData.' VarName '(indcut);']) 
1723%                     % A VOIR : CAS DE VAR STRUCTUREE MAIS PAS GRILLE REGULIERE : INTERPOLER SUR GRILLE REGULIERE             
1724%             end
1725%             coord_x=coord_x(indcut);
1726%             coord_y=coord_y(indcut);
1727%             coord_z=coord_z(indcut);
1728%         end
1729
1730       %rotate coordinates if needed: TODO modify
1731       if testangle
1732           coord_X=(coord_x *cos(Phi) + coord_y* sin(Phi));
1733           coord_Y=(-coord_x *sin(Phi) + coord_y *cos(Phi))*cos(Theta);
1734           if ~isempty(ivar_Z)
1735               coord_Y=coord_Y+coord_z *sin(Theta);
1736           end
1737           
1738           coord_X=(coord_X *cos(Psi) - coord_Y* sin(Psi));%A VERIFIER
1739           coord_Y=(coord_X *sin(Psi) + coord_Y* cos(Psi));
1740           
1741       else
1742           coord_X=coord_x;
1743           coord_Y=coord_y;
1744           coord_Z=coord_z;
1745       end
1746        %restriction to the range of x and y if imposed
1747        testin=ones(size(coord_X)); %default
1748        testbound=0;
1749        if testXMin
1750            testin=testin & (coord_X >= XMin);
1751            testbound=1;
1752        end
1753        if testXMax
1754            testin=testin & (coord_X <= XMax);
1755            testbound=1;
1756        end
1757        if testYMin
1758            testin=testin & (coord_Y >= YMin);
1759            testbound=1;
1760        end
1761        if testYMax
1762            testin=testin & (coord_Y <= YMax);
1763            testbound=1;
1764        end
1765        if testbound
1766            indcut=find(testin);
1767            for ivar=VarIndex
1768                VarName=FieldData.ListVarName{ivar};
1769                eval(['FieldData.' VarName '=FieldData.' VarName '(indcut);'])           
1770            end
1771            coord_X=coord_X(indcut);
1772            coord_Y=coord_Y(indcut);
1773            if length(ivar_Z)==1
1774                coord_Z=coord_Z(indcut);
1775            end
1776        end
1777        % different cases of projection
1778        if isequal(ObjectData.ProjMode,'projection')%%%%%%%   NOT USED %%%%%%%%%%
1779            for ivar=VarIndex %transfer variables to the projection plane
1780                VarName=FieldData.ListVarName{ivar};
1781                if ivar==ivar_X %x coordinate
1782                    eval(['ProjData.' VarName '=coord_X;'])
1783                elseif ivar==ivar_Y % y coordinate
1784                    eval(['ProjData.' VarName '=coord_Y;'])
1785                elseif isempty(ivar_Z) || ivar~=ivar_Z % other variables (except Z coordinate wyhich is not reproduced)
1786                    eval(['ProjData.' VarName '=FieldData.' VarName ';'])
1787                end
1788                if isempty(ivar_Z) || ivar~=ivar_Z
1789                    ProjData.ListVarName=[ProjData.ListVarName VarName];
1790                    ProjData.VarDimName=[ProjData.VarDimName DimCell];
1791                    nbvar=nbvar+1;
1792                    if isfield(FieldData,'VarAttribute') && length(FieldData.VarAttribute) >=ivar
1793                        ProjData.VarAttribute{nbvar}=FieldData.VarAttribute{ivar};
1794                    end
1795                end
1796            end 
1797        elseif isequal(ObjectData.ProjMode,'interp_lin')||isequal(ObjectData.ProjMode,'interp_tps')%interpolate data on a regular grid
1798            coord_x_proj=XMin:DX:XMax;
1799            coord_y_proj=YMin:DY:YMax;
1800            coord_z_proj=ZMin:DZ:ZMax;
1801            DimCell={'coord_z','coord_y','coord_x'};
1802            ProjData.ListVarName={'coord_z','coord_y','coord_x'};
1803            ProjData.VarDimName={'coord_z','coord_y','coord_x'};   
1804            nbcoord=2; 
1805            ProjData.coord_z=[ZMin ZMax];
1806            ProjData.coord_y=[YMin YMax];
1807            ProjData.coord_x=[XMin XMax];
1808            if isempty(ivar_X), ivar_X=0; end;
1809            if isempty(ivar_Y), ivar_Y=0; end;
1810            if isempty(ivar_Z), ivar_Z=0; end;
1811            if isempty(ivar_U), ivar_U=0; end;
1812            if isempty(ivar_V), ivar_V=0; end;
1813            if isempty(ivar_W), ivar_W=0; end;
1814            if isempty(ivar_F), ivar_F=0; end;
1815            if isempty(ivar_FF), ivar_FF=0; end;
1816            if ~isequal(ivar_FF,0)
1817                VarName_FF=FieldData.ListVarName{ivar_FF};
1818                eval(['indsel=find(FieldData.' VarName_FF '==0);'])
1819                coord_X=coord_X(indsel);
1820                coord_Y=coord_Y(indsel);
1821            end
1822            FF=zeros(1,length(coord_y_proj)*length(coord_x_proj));
1823            testFF=0;
1824            [X,Y,Z]=meshgrid(coord_y_proj,coord_z_proj,coord_x_proj);%grid in the new coordinates
1825            for ivar=VarIndex
1826                VarName=FieldData.ListVarName{ivar};
1827                if ~( ivar==ivar_X || ivar==ivar_Y || ivar==ivar_Z || ivar==ivar_F || ivar==ivar_FF || test_anc(ivar)==1)                 
1828                    ivar_new=ivar_new+1;
1829                    ProjData.ListVarName=[ProjData.ListVarName {VarName}];
1830                    ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
1831                    if isfield(FieldData,'VarAttribute') && length(FieldData.VarAttribute) >=ivar
1832                        ProjData.VarAttribute{ivar_new+nbcoord}=FieldData.VarAttribute{ivar};
1833                    end
1834                    if  ~isequal(ivar_FF,0)
1835                        eval(['FieldData.' VarName '=FieldData.' VarName '(indsel);'])
1836                    end
1837                    % linear interpolation
1838                    InterpFct=TriScatteredInterp(double(coord_X),double(coord_Y),double(coord_Z),double(FieldData.(VarName)));
1839                    ProjData.(VarName)=InterpFct(X,Y,Z);
1840%                     eval(['varline=reshape(ProjData.' VarName ',1,length(coord_y_proj)*length(coord_x_proj));'])
1841%                     FFlag= isnan(varline); %detect undefined values NaN
1842%                     indnan=find(FFlag);
1843%                     if~isempty(indnan)
1844%                         varline(indnan)=zeros(size(indnan));
1845%                         eval(['ProjData.' VarName '=reshape(varline,length(coord_y_proj),length(coord_x_proj));'])
1846%                         FF(indnan)=ones(size(indnan));
1847%                         testFF=1;
1848%                     end
1849                    if ivar==ivar_U
1850                        ivar_U=ivar_new;
1851                    end
1852                    if ivar==ivar_V
1853                        ivar_V=ivar_new;
1854                    end
1855                    if ivar==ivar_W
1856                        ivar_W=ivar_new;
1857                    end
1858                end
1859            end
1860            if testFF
1861                ProjData.FF=reshape(FF,length(coord_y_proj),length(coord_x_proj));
1862                ProjData.ListVarName=[ProjData.ListVarName {'FF'}];
1863               ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
1864                ProjData.VarAttribute{ivar_new+1+nbcoord}.Role='errorflag';
1865            end
1866        end
1867       
1868%% case of input fields defined on a structured  grid
1869    else
1870        VarName=FieldData.ListVarName{VarIndex(1)};%get the first variable of the cell to get the input matrix dimensions
1871        eval(['DimValue=size(FieldData.' VarName ');'])%input matrix dimensions
1872        DimValue(DimValue==1)=[];%remove singleton dimensions       
1873        NbDim=numel(DimValue);%update number of space dimensions
1874        nbcolor=1; %default number of 'color' components: third matrix index without corresponding coordinate
1875        if NbDim>=3
1876            if NbDim>3
1877                errormsg='matrices with more than 3 dimensions not handled';
1878                return
1879            else
1880                if numel(find(VarType.coord))==2% the third matrix dimension does not correspond to a space coordinate
1881                    nbcolor=DimValue(3);
1882                    DimValue(3)=[]; %number of 'color' components updated
1883                    NbDim=2;% space dimension set to 2
1884                end
1885            end
1886        end
1887        AYName=FieldData.ListVarName{VarType.coord(NbDim-1)};%name of input x coordinate (name preserved on projection)
1888        AXName=FieldData.ListVarName{VarType.coord(NbDim)};%name of input y coordinate (name preserved on projection)   
1889        eval(['AX=FieldData.' AXName ';'])
1890        eval(['AY=FieldData.' AYName ';'])
1891        ListDimName=FieldData.VarDimName{VarIndex(1)};
1892        ProjData.ListVarName=[ProjData.ListVarName {AYName} {AXName}]; %TODO: check if it already exists in Projdata (several cells)
1893        ProjData.VarDimName=[ProjData.VarDimName {AYName} {AXName}];
1894
1895%         for idim=1:length(ListDimName)
1896%             DimName=ListDimName{idim};
1897%             if strcmp(DimName,'rgb')||strcmp(DimName,'nb_coord')||strcmp(DimName,'nb_coord_i')
1898%                nbcolor=DimValue(idim);
1899%                DimValue(idim)=[];
1900%             end
1901%             if isequal(DimName,'nb_coord_j')% NOTE: CASE OF TENSOR NOT TREATED
1902%                 DimValue(idim)=[];
1903%             end
1904%         end 
1905        Coord_z=[];
1906        Coord_y=[];
1907        Coord_x=[];   
1908
1909        for idim=1:NbDim %loop on space dimensions
1910            test_interp(idim)=0;%test for coordiate interpolation (non regular grid), =0 by default
1911            ivar=VarType.coord(idim);% index of the variable corresponding to the current dimension
1912            if ~isequal(ivar,0)%  a variable corresponds to the dimension #idim
1913                eval(['Coord{idim}=FieldData.' FieldData.ListVarName{ivar} ';']) ;% coord values for the input field
1914                if numel(Coord{idim})==2 %input array defined on a regular grid
1915                   DCoord_min(idim)=(Coord{idim}(2)-Coord{idim}(1))/DimValue(idim);
1916                else
1917                    DCoord=diff(Coord{idim});%array of coordinate derivatives for the input field
1918                    DCoord_min(idim)=min(DCoord);
1919                    DCoord_max=max(DCoord);
1920                %    test_direct(idim)=DCoord_max>0;% =1 for increasing values, 0 otherwise
1921                    if abs(DCoord_max-DCoord_min(idim))>abs(DCoord_max/1000)
1922                        msgbox_uvmat('ERROR',['non monotonic dimension variable # ' num2str(idim)  ' in proj_field.m'])
1923                                return
1924                    end               
1925                    test_interp(idim)=(DCoord_max-DCoord_min(idim))> 0.0001*abs(DCoord_max);% test grid regularity
1926                end
1927                test_direct(idim)=(DCoord_min(idim)>0);
1928            else  % no variable associated with the  dimension #idim, the coordinate value is set equal to the matrix index by default
1929                Coord_i_str=['Coord_' num2str(idim)];
1930                DCoord_min(idim)=1;%default
1931                Coord{idim}=[0.5 DimValue(idim)-0.5];
1932                test_direct(idim)=1;
1933            end
1934        end
1935        if DY==0
1936            DY=abs(DCoord_min(NbDim-1));
1937        end
1938        npY=1+round(abs(Coord{NbDim-1}(end)-Coord{NbDim-1}(1))/DY);%nbre of points after interpol
1939        if DX==0
1940            DX=abs(DCoord_min(NbDim));
1941        end
1942        npX=1+round(abs(Coord{NbDim}(end)-Coord{NbDim}(1))/DX);%nbre of points after interpol
1943        for idim=1:NbDim
1944            if test_interp(idim)
1945                DimValue(idim)=1+round(abs(Coord{idim}(end)-Coord{idim}(1))/abs(DCoord_min(idim)));%nbre of points after possible interpolation on a regular gri
1946            end
1947        end       
1948        Coord_y=linspace(Coord{NbDim-1}(1),Coord{NbDim-1}(end),npY);
1949        test_direct_y=test_direct(NbDim-1);
1950        Coord_x=linspace(Coord{NbDim}(1),Coord{NbDim}(end),npX);
1951        test_direct_x=test_direct(NbDim);
1952        DAX=DCoord_min(NbDim);
1953        DAY=DCoord_min(NbDim-1); 
1954        minAX=min(Coord_x);
1955        maxAX=max(Coord_x);
1956        minAY=min(Coord_y);
1957        maxAY=max(Coord_y);
1958        xcorner=[minAX maxAX minAX maxAX]-ObjectData.Coord(1,1);
1959        ycorner=[maxAY maxAY minAY minAY]-ObjectData.Coord(1,2);
1960        xcor_new=xcorner*cos(Phi)+ycorner*sin(Phi);%coord new frame
1961        ycor_new=-xcorner*sin(Phi)+ycorner*cos(Phi);
1962        if ~testXMax
1963            XMax=max(xcor_new);
1964        end
1965        if ~testXMin
1966            XMin=min(xcor_new);
1967        end
1968        if ~testYMax
1969            YMax=max(ycor_new);
1970        end
1971        if ~testYMin
1972            YMin=min(ycor_new);
1973        end
1974        DXinit=(maxAX-minAX)/(DimValue(NbDim)-1);
1975        DYinit=(maxAY-minAY)/(DimValue(NbDim-1)-1);
1976        if DX==0
1977            DX=DXinit;
1978        end
1979        if DY==0
1980            DY=DYinit;
1981        end
1982        if NbDim==3
1983            DZ=(Coord{1}(end)-Coord{1}(1))/(DimValue(1)-1);
1984            if ~test_direct(1)
1985                DZ=-DZ;
1986            end
1987            Coord_z=linspace(Coord{1}(1),Coord{1}(end),DimValue(1));
1988            test_direct_z=test_direct(1);
1989        end
1990        npX=floor((XMax-XMin)/DX+1);
1991        npY=floor((YMax-YMin)/DY+1);   
1992        if test_direct_y
1993            coord_y_proj=linspace(YMin,YMax,npY);%abscissa of the new pixels along the line
1994        else
1995            coord_y_proj=linspace(YMax,YMin,npY);%abscissa of the new pixels along the line
1996        end
1997        if test_direct_x
1998            coord_x_proj=linspace(XMin,XMax,npX);%abscissa of the new pixels along the line
1999        else
2000            coord_x_proj=linspace(XMax,XMin,npX);%abscissa of the new pixels along the line
2001        end
2002       
2003        % case with no rotation and interpolation
2004        if isequal(ProjMode,'projection') && isequal(Phi,0) && isequal(Theta,0) && isequal(Psi,0)
2005            if ~testXMin && ~testXMax && ~testYMin && ~testYMax && NbDim==2
2006                ProjData=FieldData;
2007            else
2008                indY=NbDim-1;
2009                if test_direct(indY)
2010                    min_indy=ceil((YMin-Coord{indY}(1))/DYinit)+1;
2011                    max_indy=floor((YMax-Coord{indY}(1))/DYinit)+1;
2012                    Ybound(1)=Coord{indY}(1)+DYinit*(min_indy-1);
2013                    Ybound(2)=Coord{indY}(1)+DYinit*(max_indy-1);
2014                else
2015                    min_indy=ceil((Coord{indY}(1)-YMax)/DYinit)+1;
2016                    max_indy=floor((Coord{indY}(1)-YMin)/DYinit)+1;
2017                    Ybound(2)=Coord{indY}(1)-DYinit*(max_indy-1);
2018                    Ybound(1)=Coord{indY}(1)-DYinit*(min_indy-1);
2019                end   
2020                if test_direct(NbDim)==1
2021                    min_indx=ceil((XMin-Coord{NbDim}(1))/DXinit)+1;
2022                    max_indx=floor((XMax-Coord{NbDim}(1))/DXinit)+1;
2023                    Xbound(1)=Coord{NbDim}(1)+DXinit*(min_indx-1);
2024                    Xbound(2)=Coord{NbDim}(1)+DXinit*(max_indx-1);
2025                else
2026                    min_indx=ceil((Coord{NbDim}(1)-XMax)/DXinit)+1;
2027                    max_indx=floor((Coord{NbDim}(1)-XMin)/DXinit)+1;
2028                    Xbound(2)=Coord{NbDim}(1)+DXinit*(max_indx-1);
2029                    Xbound(1)=Coord{NbDim}(1)+DXinit*(min_indx-1);
2030                end
2031                if NbDim==3
2032                    DimCell(1)=[]; %suppress z variable
2033                    DimValue(1)=[];
2034                                        %structured coordinates
2035                    if test_direct(1)
2036                        iz=ceil((ObjectData.Coord(1,3)-Coord{1}(1))/DZ)+1;
2037                    else
2038                        iz=ceil((Coord{1}(1)-ObjectData.Coord(1,3))/DZ)+1;
2039                    end
2040                end
2041                min_indy=max(min_indy,1);% deals with margin (bound lower than the first index)
2042                min_indx=max(min_indx,1);
2043                max_indy=min(max_indy,DimValue(1));
2044                max_indx=min(max_indx,DimValue(2));
2045                for ivar=VarIndex% loop on non coordinate variables
2046                    VarName=FieldData.ListVarName{ivar};
2047                    ProjData.ListVarName=[ProjData.ListVarName VarName];
2048                    ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
2049                    if isfield(FieldData,'VarAttribute') && length(FieldData.VarAttribute)>=ivar
2050                        ProjData.VarAttribute{length(ProjData.ListVarName)}=FieldData.VarAttribute{ivar};
2051                    end
2052                    if NbDim==3
2053                        eval(['ProjData.' VarName '=squeeze(FieldData.' VarName '(iz,min_indy:max_indy,min_indx:max_indx));']);
2054                    else
2055                        eval(['ProjData.' VarName '=FieldData.' VarName '(min_indy:max_indy,min_indx:max_indx,:);']);
2056                    end
2057                end 
2058                eval(['ProjData.' AYName '=[Ybound(1) Ybound(2)];']) %record the new (projected ) y coordinates
2059                eval(['ProjData.' AXName '=[Xbound(1) Xbound(2)];']) %record the new (projected ) x coordinates
2060            end
2061        elseif isfield(FieldData,'A') %TO GENERALISE       % case with rotation and/or interpolation
2062            if NbDim==2 %2D case
2063                [X,Y]=meshgrid(coord_x_proj,coord_y_proj);%grid in the new coordinates
2064                XIMA=ObjectData.Coord(1,1)+(X)*cos(Phi)-Y*sin(Phi);%corresponding coordinates in the original image
2065                YIMA=ObjectData.Coord(1,2)+(X)*sin(Phi)+Y*cos(Phi);
2066                XIMA=(XIMA-minAX)/DXinit+1;% image index along x
2067                YIMA=(-YIMA+maxAY)/DYinit+1;% image index along y
2068                XIMA=reshape(round(XIMA),1,npX*npY);%indices reorganized in 'line'
2069                YIMA=reshape(round(YIMA),1,npX*npY);
2070                flagin=XIMA>=1 & XIMA<=DimValue(2) & YIMA >=1 & YIMA<=DimValue(1);%flagin=1 inside the original image
2071                if isequal(ObjectData.ProjMode,'interp_tps')
2072                    npx_interp_tps=ceil(abs(DX/DAX));
2073                    npy_interp_tps=ceil(abs(DY/DAY));
2074                    Minterp_tps=ones(npy_interp_tps,npx_interp_tps)/(npx_interp_tps*npy_interp_tps);
2075                    test_interp_tps=1;
2076                else
2077                    test_interp_tps=0;
2078                end
2079                eval(['ProjData.' AYName '=[coord_y_proj(1) coord_y_proj(end)];']) %record the new (projected ) y coordinates
2080                eval(['ProjData.' AXName '=[coord_x_proj(1) coord_x_proj(end)];']) %record the new (projected ) x coordinates
2081                for ivar=VarIndex
2082                    VarName=FieldData.ListVarName{ivar};
2083                    if test_interp(1) || test_interp(2)%interpolate on a regular grid       
2084                          eval(['ProjData.' VarName '=interp2(Coord{2},Coord{1},FieldData.' VarName ',Coord_x,Coord_y'');']) %TO TEST
2085                    end
2086                    %filter the field (image) if option 'interp_tps' is used
2087                    if test_interp_tps 
2088                         Aclass=class(FieldData.A);
2089                         ProjData.(VarName)=interp_tps2(Minterp_tps,FieldData.(VarName),'valid');
2090                         if ~isequal(Aclass,'double')
2091                             ProjData.(VarName)=Aclass(FieldData.(VarName));%revert to integer values
2092                         end
2093                    end
2094                    eval(['vec_A=reshape(FieldData.' VarName ',[],nbcolor);'])%put the original image in line             
2095                    %ind_in=find(flagin);
2096                    ind_out=find(~flagin);
2097                    ICOMB=(XIMA-1)*DimValue(1)+YIMA;
2098                    ICOMB=ICOMB(flagin);%index corresponding to XIMA and YIMA in the aligned original image vec_A
2099                    vec_B(flagin,1:nbcolor)=vec_A(ICOMB,:);
2100                    for icolor=1:nbcolor
2101                        vec_B(ind_out,icolor)=zeros(size(ind_out));
2102                    end
2103                    ProjData.ListVarName=[ProjData.ListVarName VarName];
2104                    ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
2105                    if isfield(FieldData,'VarAttribute')&&length(FieldData.VarAttribute)>=ivar
2106                        ProjData.VarAttribute{length(ProjData.ListVarName)+nbcoord}=FieldData.VarAttribute{ivar};
2107                    end     
2108                    eval(['ProjData.' VarName '=reshape(vec_B,npY,npX,nbcolor);']);
2109                end
2110                ProjData.FF=reshape(~flagin,npY,npX);%false flag A FAIRE: tenir compte d'un flga antï¿œrieur 
2111                ProjData.ListVarName=[ProjData.ListVarName 'FF'];
2112                ProjData.VarDimName=[ProjData.VarDimName {DimCell}];
2113                ProjData.VarAttribute{length(ProjData.ListVarName)}.Role='errorflag';
2114            else %3D case
2115                if ~testangle     
2116                    % unstructured z coordinate
2117                    test_sup=(Coord{1}>=ObjectData.Coord(1,3));
2118                    iz_sup=find(test_sup);
2119                    iz=iz_sup(1);
2120                    if iz>=1 & iz<=npz
2121                        %ProjData.ListDimName=[ProjData.ListDimName ListDimName(2:end)];
2122                        %ProjData.DimValue=[ProjData.DimValue npY npX];
2123                        for ivar=VarIndex
2124                            VarName=FieldData.ListVarName{ivar};
2125                            ProjData.ListVarName=[ProjData.ListVarName VarName];
2126                            ProjData.VarAttribute{length(ProjData.ListVarName)}=FieldData.VarAttribute{ivar}; %reproduce the variable attributes 
2127                            eval(['ProjData.' VarName '=squeeze(FieldData.' VarName '(iz,:,:));'])% select the z index iz
2128                            %TODO : do a vertical average for a thick plane
2129                            if test_interp(2) || test_interp(3)
2130                                eval(['ProjData.' VarName '=interp2(Coord{3},Coord{2},ProjData.' VarName ',Coord_x,Coord_y'');'])
2131                            end
2132                        end
2133                    end
2134                else
2135                    errormsg='projection of structured coordinates on oblique plane not yet implemented';
2136                    %TODO: use interp3
2137                    return
2138                end
2139            end
2140        end
2141    end
2142
2143    %% projection of  velocity components in the rotated coordinates
2144    if testangle
2145        if isempty(ivar_V)
2146            msgbox_uvmat('ERROR','v velocity component missing in proj_field.m')
2147            return
2148        end
2149        UName=FieldData.ListVarName{ivar_U};
2150        VName=FieldData.ListVarName{ivar_V};   
2151        eval(['ProjData.' UName  '=cos(Phi)*ProjData.' UName '+ sin(Phi)*ProjData.' VName ';'])
2152        eval(['ProjData.' VName  '=cos(Theta)*(-sin(Phi)*ProjData.' UName '+ cos(Phi)*ProjData.' VName ');'])
2153        if ~isempty(ivar_W)
2154            WName=FieldData.ListVarName{ivar_W};
2155            eval(['ProjData.' VName '=ProjData.' VName '+ ProjData.' WName '*sin(Theta);'])%
2156            eval(['ProjData.' WName '=NormVec_X*ProjData.' UName '+ NormVec_Y*ProjData.' VName '+ NormVec_Z* ProjData.' WName ';']);
2157        end
2158        if ~isequal(Psi,0)
2159            eval(['ProjData.' UName '=cos(Psi)* ProjData.' UName '- sin(Psi)*ProjData.' VName ';']);
2160            eval(['ProjData.' VName '=sin(Psi)* ProjData.' UName '+ cos(Psi)*ProjData.' VName ';']);
2161        end
2162    end
2163end
2164
2165%------------------------------------------------------------------------
2166%--- transfer the global attributes
2167function [ProjData,errormsg]=proj_heading(FieldData,ObjectData)
2168%------------------------------------------------------------------------
2169ProjData=[];%default
2170errormsg='';%default
2171
2172%% transfer error
2173if isfield(FieldData,'Txt')
2174    errormsg=FieldData.Txt; %transmit erreur message
2175    return;
2176end
2177
2178%% transfer global attributes
2179if ~isfield(FieldData,'ListGlobalAttribute')
2180    ProjData.ListGlobalAttribute={};
2181else
2182    ProjData.ListGlobalAttribute=FieldData.ListGlobalAttribute;
2183end
2184for iattr=1:length(ProjData.ListGlobalAttribute)
2185    AttrName=ProjData.ListGlobalAttribute{iattr};
2186    if isfield(FieldData,AttrName)
2187        ProjData.(AttrName)=FieldData.(AttrName);
2188    end
2189end
2190
2191%% transfer coordinate unit
2192if isfield(ProjData,'CoordUnit')
2193    ProjData=rmfield(ProjData,'CoordUnit');% do not transfer by default (to avoid x/y=1 for profiles)
2194end
2195if isfield(FieldData,'CoordUnit')
2196    if isfield(ObjectData,'CoordUnit') && ~strcmp(FieldData.CoordUnit,ObjectData.CoordUnit)
2197        errormsg=[ObjectData.Type ' in ' ObjectData.CoordUnit ' coordinates, while field in ' FieldData.CoordUnit ];
2198        return
2199    elseif strcmp(ObjectData.Type,'plane')|| strcmp(ObjectData.Type,'volume')
2200         ProjData.CoordUnit=FieldData.CoordUnit;
2201    end
2202end
2203
2204%% store the properties of the projection object
2205ListObject={'Type','ProjMode','RangeX','RangeY','RangeZ','Phi','Theta','Psi','Coord'};
2206for ilist=1:length(ListObject)
2207    if isfield(ObjectData,ListObject{ilist})
2208        val=ObjectData.(ListObject{ilist});
2209        if ~isempty(val)
2210            ProjData.(['Object' ListObject{ilist}])=val;
2211            ProjData.ListGlobalAttribute=[ProjData.ListGlobalAttribute {['Object' ListObject{ilist}]}];
2212        end
2213    end   
2214end
2215
Note: See TracBrowser for help on using the repository browser.