source: trunk/src/script_readlvm.m @ 917

Last change on this file since 917 was 893, checked in by sommeria, 10 years ago

read netcdf fixed

File size: 6.3 KB
Line 
1%% get the input file
2fileinput=uigetfile_uvmat('pick an input file','/fsnet/project/coriolis/2015/15STRATJET/Probes');
3[Path,Name,Ext]=fileparts(fileinput);
4
5%% read the input file
6FileType='';
7if strcmp(Ext,'.lvm')
8    disp(['reading ' fileinput '...'])
9Data=read_lvm(fileinput)
10elseif strcmp(Ext,'.nc')
11    disp(['reading ' fileinput '...'])
12    Data=nc2struct(fileinput)
13else
14    disp('invalid input file extension')
15end
16
17%% save as netcdf file if it has been opened as .lvm
18if strcmp(Ext,'.lvm')
19    OutputFile=fullfile(Path,[Name '.nc']);
20    errormsg=struct2nc(OutputFile,Data);% copy the data in a netcdf file
21    if isempty(errormsg)
22        disp([OutputFile ' written'])
23    else
24        disp(errormsg)
25    end
26    [success,msg] = fileattrib(OutputFile,'+w','g')% allow writing access for the group of users
27end
28
29%% use calibration data stored in an xml file
30ProbeDoc=[];
31XmlFile=fullfile(Path,[Name '.xml']);
32if exist(XmlFile,'file')
33    ProbeDoc=xml2struct(XmlFile);
34end
35% if isfield(Data,'Position'), C2,C4,C6
36%     Min=1;
37%     Data.Position=Data.Position+PositionMin;
38% end
39% a5=-2.134088,b5=1010.1611,
40% Data.C2=Data.C2;
41% Data.C5=a5*Data.C5+b5;
42% Data.C6=Data.C2;
43% ylabelstring='density drho (kg/m3)';
44
45%% treqnsform conductivity probe signals: calibration + filter at 10 Hz
46ylabelstring='conductivity signal (volts)';
47clist=0;% counter of conductivity probes
48for ilist=1:numel(Data.ListVarName)
49    if isequal(Data.ListVarName{ilist}(1),'C');% if the var name begins by 'C'
50        clist=clist+1;
51        CName{clist}=Data.ListVarName{ilist};
52        if isfield(ProbeDoc,CName{clist})&& ~isempty(ProbeDoc.(CName{clist}))
53            a=ProbeDoc.(CName{clist}).a;
54            b=ProbeDoc.(CName{clist}).b;
55            Data.(CName{clist})=a*Data.(CName{clist})+b;% transform volt signal into density
56            Data.(CName{clist})=filter(ones(1,20)/20,1,Data.(CName{clist})); % filter the signal to 10 Hz
57            ylabelstring='density drho (g/cm3)';
58        end
59    end
60end
61
62%% plot conductivity probe signals
63figure(1)
64set(1,'name','conductivity')
65plot_string='plot(';
66for clist=1:numel(CName)
67    plot_string=[plot_string 'Data.Time,Data.' CName{clist} ','];
68end
69plot_string(end)=')';
70eval(plot_string)
71legend(CName')
72htitle=title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', conductivity probes']);
73set(htitle,'Interpreter','none')% desable tex interpreter
74xlabel('Time(s)')
75ylabel(ylabelstring)
76grid on
77
78if isfield(Data,'Position')
79    %% plot  motor position
80    figure(2)
81    set(2,'name','position')
82    plot(Data.Time,Data.Position)
83    htitle=title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', probe position ']);
84    set(htitle,'Interpreter','none')% desable tex interpreter
85    xlabel('Time(s)')
86    ylabel('Z (cm)')
87    grid on
88    hold on
89    plot(Data.Time,Data.Speed)
90   
91    %%plot first profile
92    figure(4)
93    index1=find(Data.Speed<0,1); %start of descent
94    Speed=Data.Speed(index1:end);
95    index2=index1-1+find(Speed>0,1); %end of descent
96    plot(Data.Position(index1:index2),Data.C1(index1:index2))
97   
98    %% plot conductivity probe profiles (limited to downward motion, Data.Speed<0)
99    if ~isempty(ProbeDoc)
100        figure(3)
101        set(3,'name','profiles')
102        Zmotor=Data.Position(Data.Speed<0);
103        Z=Zmotor*ones(1,numel(CName));%motor position transformed in a matrix with a columnfor each probe
104        Zmax=max(Zmotor);
105        plot_string='plot(';
106        for clist=1:numel(CName)
107            if isfield(ProbeDoc,CName{clist})&& ~isempty(ProbeDoc.(CName{clist})) && size(ProbeDoc.(CName{clist}).Position,2)>=2 % if at least two positions are defined to indicate that the probe moves
108               Zprobe=Zmotor-Zmax+ProbeDoc.(CName{clist}).Position(2,3);%upper position of the probe
109               Zprobe(Zprobe<ProbeDoc.(CName{clist}).Position(1,3))=ProbeDoc.(CName{clist}).Position(1,3);
110                Z(:,clist)=Zprobe;% add to z the first z position of the chosen probe (given in the xml file)
111                plot_string=[plot_string 'Z(:,' num2str(clist) '),Data.' CName{clist} '(Data.Speed<0),'];
112            end
113        end
114        plot_string(end)=')';
115        eval(plot_string)
116        legend(CName')
117        htitle=title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', conductivity probes']);
118        set(htitle,'Interpreter','none')% desable tex interpreter
119        xlabel('Z(cm)')
120        ylabel(ylabelstring)
121        grid on
122    end
123    %     plot(Z,Data.C2(Data.Speed<0),Z,Data.C3(Data.Speed<0),Z,Data.C4(Data.Speed<0),Z,Data.C5(Data.Speed<0))
124    %     legend({'C2';'C3';'C4';'C5'})
125    %     title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', profiles conductivity probes'])
126    %     xlabel('Z(cm)')
127    %     %ylabel('signal (Volt)')
128    %     ylabel(ylabelstring)
129    %     grid on
130   
131   
132    %     set(3,'name','profiles')
133    %     PositionMin=1; %position of probes at the bottom (Z=1 cm)
134    %     Data.Position=Data.Position-min(Data.Position)+PositionMin;
135    %     Z=Data.Position(Data.Speed<0);
136    %     plot(Z,Data.C2(Data.Speed<0),Z,Data.C5(Data.Speed<0),Z,Data.C6(Data.Speed<0))
137    %     legend({'C2';'C5';'C6'})
138    %     title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', profiles conductivity probes'])
139    %     xlabel('Z(cm)')
140    %     %ylabel('signal (Volt)')
141    %     ylabel(ylabelstring)
142    %     grid on
143   
144end
145
146
147
148
149%% plot temperature signals
150% figure(4)
151% set(4,'name','temperature')
152% plot(Data.Time,Data.T2,Data.Time,Data.T5,Data.Time,Data.T6)
153% legend({'T2';'T5';'T6'})
154% title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', signal conductivity probes'])
155% xlabel('Time(s)')
156% ylabel('signal (Volt)')
157% grid on
158
159%% plot velocity (ADV) signals
160% figure(5)
161% set(5,'name','velocity')
162% plot(Data.Time,Data.ADV_X,Data.Time,Data.ADV_Y,Data.Time,Data.ADV_Z1,Data.Time,Data.ADV_Z2)
163% legend({'ADV_X';'ADV_Y';'ADV_Z1';'ADV_Z2'})
164% title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', signal velocity'])
165% xlabel('Time(s)')
166% ylabel('signal (Volt)')
167% grid on
168
169%% plot velocity interface signals
170% figure(6)
171% set(6,'name','interface')
172% plot(Data.Time,Data.I1,Data.Time,Data.I2,Data.Time,Data.I3,Data.Time,Data.I4)
173% legend({'I1';'I2';'I3';'I4'})
174% title([Data.Experiment ', '  Data.FileName ', Time=' Data.DateTime ', signal interface (ultrasound)'])
175% xlabel('Time(s)')
176% ylabel('signal (Volt)')
177% grid on
178
179
Note: See TracBrowser for help on using the repository browser.