source: trunk/src/series/civ_3D.m @ 1163

%'civ_3D': 3D PIV from image scan in a volume 

%------------------------------------------------------------------------
% function [Data,errormsg,result_conv]= civ_3D(Param)
%
%OUTPUT
% Data=structure containing the PIV results and information on the processing parameters
% errormsg=error message char string, decd ..fault=''
% resul_conv: image inter-correlation function for the last grid point (used for tests)
%
%INPUT:
% Param: Matlab structure of input  parameters
%     Param contains info of the GUI series using the fct read_GUI.
%     Param.Action.RUN = 0 (to set the status of the GUI series) or =1 to RUN the computation 
%     Param.InputTable: sets the input file(s)
%           if absent, the fct looks for input data in Param.ActionInput     (test mode)
%     Param.OutputSubDir: sets the folder name of output file(s,
%     Param.ActionInput: substructure with the parameters provided by the GUI civ_input
%                      .Civ1: parameters for civ1cc
%                      .Fix1: parameters for detect_false1
%                      .Patch1:
%                      .Civ2: for civ2
%                      .Fix2:
%                      .Patch2:

%=======================================================================
% Copyright 2008-2024, LEGI UMR 5519 / CNRS UGA G-INP, Grenoble, France
%   http://www.legi.grenoble-inp.fr
%   Joel.Sommeria - Joel.Sommeria (A) univ-grenoble-alpes.fr
%
%     This file is part of the toolbox UVMAT.
%
%     UVMAT is free software; you can redistribute it and/or modify
%     it under the terms of the GNU General Public License as published
%     by the Free Software Foundation; either version 2 of the license,
%     or (at your option) any later version.
%
%     UVMAT is distributed in the hope that it will be useful,
%     but WITHOUT ANY WARRANTY; without even the implied warranty of
%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%     GNU General Public License (see LICENSE.txt) for more details.
%=======================================================================

function [Data,errormsg,result_conv]= civ_3D(Param)
errormsg='';

%% set the input elements needed on the GUI series when the action is selected in the menu ActionName or InputTable refreshed
if isstruct(Param) && isequal(Param.Action.RUN,0)% function activated from the GUI series but not RUN
    path_series=fileparts(which('series'));
    addpath(fullfile(path_series,'series'))

   Data=civ_input(Param)

    Data.Program=mfilename;%gives the name of the current function
    Data.AllowInputSort='off';% allow alphabetic sorting of the list of input file SubDir (options 'off'/'on', 'off' by default)
    Data.IndexRange_j='whole';% prescribes the file index ranges j from min to max (options 'off'/'on'/'whole', 'on' by default)
    Data.NbSlice='off'; %nbre of slices ('off' by default)
    Data.VelType='off';% menu for selecting the velocity type (options 'off'/'one'/'two',  'off' by default)
    Data.FieldName='on';% menu for selecting the field (s) in the input file(options 'off'/'one'/'two', 'off' by default)
    Data.FieldTransform = 'off';%can use a transform function
    Data.ProjObject='off';%can use projection object(option 'off'/'on',
    Data.Mask='off';%can use mask option   (option 'off'/'on', 'off' by default)
    Data.OutputDirExt='.civ_3D';%set the output dir extension
    Data.OutputSubDirMode='last'; %select the last subDir in the input table as root of the output subdir name (option 'all'/'first'/'last', 'all' by default)
    Data.OutputFileMode='NbInput_i';% one output file expected per value of i index (used for waitbar)
    Data.CheckOverwriteVisible='on'; % manage the overwrite of existing files (default=1)
    if isfield(Data,'ActionInput') && isfield(Data.ActionInput,'PairIndices') && strcmp(Data.ActionInput.PairIndices.ListPairMode,'pair j1-j2')
        if isfield(Data.ActionInput.PairIndices,'ListPairCiv2')
            str_civ=Data.ActionInput.PairIndices.ListPairCiv2;
        else
            str_civ=Data.ActionInput.PairIndices.ListPairCiv1;
        end
        r=regexp(str_civ,'^j= (?<num1>[a-z])-(?<num2>[a-z])','names');
        if isempty(r)
            r=regexp(str_civ,'^j= (?<num1>[A-Z])-(?<num2>[A-Z])','names');
            if isempty(r)
                r=regexp(str_civ,'^j= (?<num1>\d+)-(?<num2>\d+)','names');
            end
        end
        if ~isempty(r)
            Data.j_index_1=stra2num(r.num1);
            Data.j_index_2=stra2num(r.num2);
        end
    end


    return
end
%% END OF ENTERING INPUT PARAMETER MODE

%% RUN MODE: read input parameters from an xml file if input is a file name (batch mode)
if ischar(Param)
    Param=xml2struct(Param);% read Param as input file (batch case)
    checkrun=0;
    RUNHandle=[];
else
    hseries=findobj(allchild(0),'Tag','series');
    RUNHandle=findobj(hseries,'Tag','RUN');%handle of RUN button in GUI series
    WaitbarHandle=findobj(hseries,'Tag','Waitbar');%handle of waitbar in GUI series
    checkrun=1;
end

%% test input Param
if ~isfield(Param,'InputTable')
    disp('ERROR: no input file entered')
    return
end
if ~isfield(Param,'ActionInput')
    disp_uvmat('ERROR','no parameter set for PIV',checkrun)
    return
end
iview_A=0;%default values

if isfield(Param,'OutputSubDir')&& isfield(Param,'OutputDirExt')
    OutputDir=[Param.OutputSubDir Param.OutputDirExt];
     OutputPath=fullfile(Param.OutputPath,num2str(Param.Experiment),num2str(Param.Device));
else
    disp_uvmat('ERROR','no output folder defined',checkrun)
    return
end

%% input files and indexing
MaxIndex_i=Param.IndexRange.MaxIndex_i;
MinIndex_i=Param.IndexRange.MinIndex_i;
MaxIndex_j=ones(size(MaxIndex_i));MinIndex_j=ones(size(MinIndex_i));
if isfield(Param.IndexRange,'MaxIndex_j')&& isfield(Param.IndexRange,'MinIndex_j')
    MaxIndex_j=Param.IndexRange.MaxIndex_j;
    MinIndex_j=Param.IndexRange.MinIndex_j;
end

[~,i1_series,~,j1_series,~]=get_file_series(Param);
iview_A=0;% series index (iview) for the first image series
iview_B=0;% series index (iview) for the second image series (only non zero for option 'shift' comparing two image series )
if Param.ActionInput.CheckCiv1
    iview_A=1;% usual PIV, the image series is on the first line of the table
elseif Param.ActionInput.CheckCiv2 % civ2 is performed without Civ1, a netcdf file series is needed in the first table line
    iview_A=2;% the second line is used for the input images of Civ2
end
if iview_A~=0
    RootPath_A=Param.InputTable{iview_A,1};
    RootFile_A=Param.InputTable{iview_A,3};
    SubDir_A=Param.InputTable{iview_A,2};
    NomType_A=Param.InputTable{iview_A,4};
    FileExt_A=Param.InputTable{iview_A,5};
    if iview_B==0
        iview_B=iview_A;% the second image series is the same as the first
    end
    RootPath_B=Param.InputTable{iview_B,1};
    RootFile_B=Param.InputTable{iview_B,3};
    SubDir_B=Param.InputTable{iview_B,2};
    NomType_B=Param.InputTable{iview_B,4};
    FileExt_B=Param.InputTable{iview_B,5};
end

PairCiv1=Param.ActionInput.PairIndices.ListPairCiv1;

[i1_series_Civ1,i2_series_Civ1,j1_series_Civ1,j2_series_Civ1,~,NomTypeNc]=...
                        find_pair_indices(PairCiv1,i1_series{1},j1_series{1},MinIndex_i,MaxIndex_i,MinIndex_j,MaxIndex_j);
                    
if isempty(i1_series_Civ1)
    disp_uvmat('ERROR','no image pair for civ in the input file index range',checkrun)
    return
end
NbField_i=size(i1_series_Civ1,2);
NbSlice=size(i1_series_Civ1,1);

%% prepare output Data
ListGlobalAttribute={'Conventions','Program','CivStage'};
Data.Conventions='uvmat/civdata_3D';% states the conventions used for the description of field variables and attributes
Data.Program='civ_3D';
if isfield(Param,'UvmatRevision')
    Data.Program=[Data.Program ', uvmat r' Param.UvmatRevision];
end
Data.CivStage=0;%default
list_param=(fieldnames(Param.ActionInput.Civ1))';
list_param(strcmp('TestCiv1',list_param))=[];% remove the parameter TestCiv1 from the list
Civ1_param=regexprep(list_param,'^.+','Civ1_$0');% insert 'Civ1_' before  each string in list_param
Civ1_param=[{'Civ1_ImageA','Civ1_ImageB','Civ1_Time','Civ1_Dt'} Civ1_param]; %insert the names of the two input images
Data.ListGlobalAttribute=[ListGlobalAttribute Civ1_param];
% set the list of variables
Data.ListVarName={'Coord_z','Civ1_X','Civ1_Y','Civ1_U','Civ1_V','Civ1_W','Civ1_C','Civ1_FF'};%  cell array containing the names of the fields to record
Data.VarDimName={'npz',{'npz','npy','npx'},{'npz','npy','npx'},{'npz','npy','npx'},{'npz','npy','npx'},...
    {'npz','npy','npx'},{'npz','npy','npx'},{'npz','npy','npx'}};
Data.VarAttribute{1}.Role='coord_z';
Data.VarAttribute{2}.Role='coord_x';
Data.VarAttribute{3}.Role='coord_y';
Data.VarAttribute{4}.Role='vector_x';
Data.VarAttribute{5}.Role='vector_y';
Data.VarAttribute{6}.Role='vector_z';
Data.VarAttribute{7}.Role='ancillary';
Data.VarAttribute{8}.Role='errorflag';
% Data.Coord_z=j1_series_Civ1;
% path for output nc file
OutputPath=fullfile(Param.OutputPath,num2str(Param.Experiment),num2str(Param.Device),[Param.OutputSubDir Param.OutputDirExt]);

%% get timing from the ImaDoc file or input video
if iview_A~=0
    XmlFileName=find_imadoc(RootPath_A,SubDir_A);
    Time=[];
    if ~isempty(XmlFileName)
        XmlData=imadoc2struct(XmlFileName);
        if isfield(XmlData,'Time')
            Time=XmlData.Time;
        end
        if isfield(XmlData,'Camera')
            if isfield(XmlData.Camera,'NbSlice')&& ~isempty(XmlData.Camera.NbSlice)
                NbSlice_calib{iview}=XmlData.Camera.NbSlice;% Nbre of slices for Zindex in phys transform
                if ~isequal(NbSlice_calib{iview},NbSlice_calib{1})
                    msgbox_uvmat('WARNING','inconsistent number of Z indices for the two field series');
                end
            end
            if isfield(XmlData.Camera,'TimeUnit')&& ~isempty(XmlData.Camera.TimeUnit)
                TimeUnit=XmlData.Camera.TimeUnit;
            end
        end
    end
end

maskoldname='';% initiate the mask name
FileType_A='';
FileType_B='';
CheckOverwrite=1;%default
if isfield(Param,'CheckOverwrite')
    CheckOverwrite=Param.CheckOverwrite;
end
   Data.Civ1_ImageA=fullfile_uvmat(RootPath_A,SubDir_A,RootFile_A,FileExt_A,NomType_A,i1_series_Civ1(1),[],j1_series_Civ1(1,1));
   Data.Civ1_ImageB=fullfile_uvmat(RootPath_B,SubDir_B,RootFile_B,FileExt_B,NomType_B,i1_series_Civ1(1),[],j2_series_Civ1(1,1));
    FileInfo=get_file_info(Data.Civ1_ImageA);
        par_civ1=Param.ActionInput.Civ1;% parameters for civ1
    par_civ1.ImageHeight=FileInfo.Height;npy=FileInfo.Height;
    par_civ1.ImageWidth=FileInfo.Width;npx=FileInfo.Width;
SearchRange_z=Param.ActionInput.Civ1.SearchRange(3);
    par_civ1.Dz=Param.ActionInput.Civ1.Dz;
    par_civ1.ImageA=zeros(2*SearchRange_z+1,npy,npx);
par_civ1.ImageB=zeros(2*SearchRange_z+1,npy,npx);



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%% MAIN LOOP %%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
for ifield=1:NbField_i
    tstart=tic;
    time_civ1=0;
    time_patch1=0;
    time_civ2=0;
    time_patch2=0;
    if checkrun% update the waitbar in interactive mode with GUI series  (checkrun=1)
        update_waitbar(WaitbarHandle,ifield/NbField_i)
        if  checkrun && ~strcmp(get(RUNHandle,'BusyAction'),'queue')
            disp('program stopped by user')
            break
        end
    end
    
    %indicate the values of all the global attributes in the output data
    i1=i1_series_Civ1(ifield);
    i2=i1;
    if ~isempty(i2_series_Civ1)
        i2=i2_series_Civ1(ifield);
    end
    j1=1;
    if ~isempty(j1_series_Civ1)
        j1=j1_series_Civ1(ifield);
    end
    j2=j1;
    if ~isempty(j2_series_Civ1)
        j2=j2_series_Civ1(ifield);
    end

    Data.Civ1_Time=(Time(i2+1,j2+1)+Time(i1+1,j1+1))/2;% the Time is the Time at the middle of the image pair
    Data.Civ1_Dt=Time(i2+1,j2+1)-Time(i1+1,j1+1);

    for ilist=1:length(list_param)
        Data.(Civ1_param{4+ilist})=Param.ActionInput.Civ1.(list_param{ilist});
    end
    
    Data.CivStage=1;
  
    ncfile_out=fullfile_uvmat(OutputPath,'',Param.InputTable{1,3},'.nc',...
                '_1-1',i1_series_Civ1(ifield),i2_series_Civ1(ifield)); %output file name

    if ~CheckOverwrite && exist(ncfile_out,'file')
        disp(['existing output file ' ncfile_out ' already exists, skip to next field'])
        continue% skip iteration if the mode overwrite is desactivated and the result file already exists
    end


    %% Civ1
    % if Civ1 computation is requested
    if isfield (Param.ActionInput,'Civ1')

        disp('civ1 started')

        % read input images by vertical blocks with nbre of images equal to 2*SearchRange+1,
        par_civ1.ImageA=zeros(2*SearchRange_z+1,npy,npx);%image block initiation
        par_civ1.ImageB=zeros(2*SearchRange_z+1,npy,npx);
        Data.Coord_z=SearchRange_z+1:par_civ1.Dz:NbSlice-1;
        z_index=1;%first vertical block centered at image index z_index=SearchRange_z+1
        for iz=1:2*SearchRange_z+1
            j_image_index=j1_series_Civ1(iz,1)% j index of the current image
            ImageName_A=fullfile_uvmat(RootPath_A,SubDir_A,RootFile_A,FileExt_A,NomType_A,i1_series_Civ1(1,ifield),[],j_image_index);%
            A= read_image(ImageName_A,FileType_A);
            ImageName_B=fullfile_uvmat(RootPath_B,SubDir_B,RootFile_B,FileExt_B,NomType_B,i2_series_Civ1(1,ifield),[],j_image_index);
            B= read_image(ImageName_B,FileType_B);
            par_civ1.ImageA(iz,:,:) = A;
            par_civ1.ImageB(iz,:,:) = B;
        end
        % calculate velocity data at the first position z, corresponding to j_index=par_civ1.Dz
        [Data.Civ1_X(1,:,:),Data.Civ1_Y(1,:,:), Data.Civ1_U(1,:,:), Data.Civ1_V(1,:,:),Data.Civ1_W(1,:,:),...
            Data.Civ1_C(1,:,:), Data.Civ1_FF(1,:,:), ~, errormsg] = civ3D (par_civ1);
        if ~isempty(errormsg)
            disp_uvmat('ERROR',errormsg,checkrun)
            return
        end
     % loop on slices

        for z_index=2:floor((NbSlice-SearchRange_z)/par_civ1.Dz)% loop on slices
            par_civ1.ImageA=circshift(par_civ1.ImageA,-par_civ1.Dz,1);%shift the indices in the image block upward by par_civ1.Dz
            par_civ1.ImageB=circshift(par_civ1.ImageB,-par_civ1.Dz,1);
            for iz=1:par_civ1.Dz %read the new images at the end of the image block
                image_index=z_index*par_civ1.Dz+SearchRange_z-par_civ1.Dz+iz+1;
                if image_index<=size(j1_series_Civ1,1)
                j_image_index=j1_series_Civ1(z_index*par_civ1.Dz+SearchRange_z-par_civ1.Dz+iz+1,1)
                ImageName_A=fullfile_uvmat(RootPath_A,SubDir_A,RootFile_A,FileExt_A,NomType_A,i1_series_Civ1(1,ifield),[],j_image_index);%            
                A= read_image(ImageName_A,FileType_A);
                ImageName_B=fullfile_uvmat(RootPath_B,SubDir_B,RootFile_B,FileExt_B,NomType_B,i2_series_Civ1(1,ifield),[],j_image_index);
                B= read_image(ImageName_B,FileType_B);
                else
                    A=zeros(1,size(par_civ1.ImageA,2),size(par_civ1.ImageA,3));
                    B=zeros(1,size(par_civ1.ImageA,2),size(par_civ1.ImageA,3));
                end
                par_civ1.ImageA(2*SearchRange_z+1-par_civ1.Dz+iz,:,:) = A;
                par_civ1.ImageB(2*SearchRange_z+1-par_civ1.Dz+iz,:,:) = B;
            end
            % caluclate velocity data (y and v in indices, reverse to y component)
            [Data.Civ1_X(z_index,:,:),Data.Civ1_Y(z_index,:,:), Data.Civ1_U(z_index,:,:), Data.Civ1_V(z_index,:,:),Data.Civ1_W(z_index,:,:),...
                Data.Civ1_C(z_index,:,:), Data.Civ1_FF(z_index,:,:), result_conv, errormsg] = civ3D (par_civ1);
            if ~isempty(errormsg)
                disp_uvmat('ERROR',errormsg,checkrun)
                return
            end
        end
        Data.Civ1_V=-Data.Civ1_V;%reverse v
        Data.Civ1_Y=npy-Data.Civ1_Y+1;%reverse y
        [npz,npy,npx]=size(Data.Civ1_X);
        
      %  Data.Coord_y=flip(1:npy);
       % Data.Coord_x=1:npx;
        % case of mask TO ADAPT
        if par_civ1.CheckMask&&~isempty(par_civ1.Mask)
            if isfield(par_civ1,'NbSlice')
                [RootPath_mask,SubDir_mask,RootFile_mask,i1_mask,i2_mask,j1_mask,j2_mask,Ext_mask]=fileparts_uvmat(Param.ActionInput.Civ1.Mask);
                i1_mask=mod(i1-1,par_civ1.NbSlice)+1;
                maskname=fullfile_uvmat(RootPath_mask,SubDir_mask,RootFile_mask,Ext_mask,'_1',i1_mask);
            else
                maskname=Param.ActionInput.Civ1.Mask;
            end
            if strcmp(maskoldname,maskname)% mask exist, not already read in civ1
                par_civ1.Mask=mask; %use mask already opened
            else
                if ~isempty(regexp(maskname,'(^http://)|(^https://)'))|| exist(maskname,'file')
                    try
                        par_civ1.Mask=imread(maskname);%update the mask, an store it for future use
                    catch ME
                        if ~isempty(ME.message)
                            errormsg=['error reading input image: ' ME.message];
                            disp_uvmat('ERROR',errormsg,checkrun)
                            return
                        end
                    end
                else
                    par_civ1.Mask=[];
                end
                mask=par_civ1.Mask;
                maskoldname=maskname;
            end
        end
        % Data.ListVarName=[Data.ListVarName 'Civ1_Z'];
        % Data.Civ1_X=[];Data.Civ1_Y=[];Data.Civ1_Z=[];
        % Data.Civ1_U=[];Data.Civ1_V=[];Data.Civ1_C=[];
        % 
        % 
        % Data.Civ1_X=[Data.Civ1_X reshape(xtable,[],1)];
        % Data.Civ1_Y=[Data.Civ1_Y reshape(Param.Civ1.ImageHeight-ytable+1,[],1)];
        % Data.Civ1_Z=[Data.Civ1_Z ivol*ones(numel(xtable),1)];% z=image index in image coordinates
        % Data.Civ1_U=[Data.Civ1_U reshape(utable,[],1)];
        % Data.Civ1_V=[Data.Civ1_V reshape(-vtable,[],1)];
        % Data.Civ1_C=[Data.Civ1_C reshape(ctable,[],1)];
        % Data.Civ1_FF=[Data.Civ1_FF reshape(F,[],1)];

    end

    %% Fix1
    if isfield (Param.ActionInput,'Fix1')
        disp('detect_false1 started')
        if ~isfield (Param.ActionInput,'Civ1')% if we use existing Civ1, remove previous data beyond Civ1
            Fix1_attr=find(strcmp('Fix1',Data.ListGlobalAttribute));
            Data.ListGlobalAttribute(Fix1_attr)=[];
            for ilist=1:numel(Fix1_attr)
                Data=rmfield(Data,Data.ListGlobalAttribute{Fix1_attr(ilist)});
            end
        end
        list_param=fieldnames(Param.ActionInput.Fix1)';
        Fix1_param=regexprep(list_param,'^.+','Fix1_$0');% insert 'Fix1_' before  each string in ListFixParam
        %indicate the values of all the global attributes in the output data
        for ilist=1:length(list_param)
            Data.(Fix1_param{ilist})=Param.ActionInput.Fix1.(list_param{ilist});
        end
        Data.ListGlobalAttribute=[Data.ListGlobalAttribute Fix1_param];
        Data.Civ1_FF=uint8(detect_false(Param.ActionInput.Fix1,Data.Civ1_C,Data.Civ1_U,Data.Civ1_V,Data.Civ1_FF));
        Data.CivStage=2;
    end
    %% Patch1
    if isfield (Param.ActionInput,'Patch1')
        disp('patch1 started')
        tstart_patch1=tic;

        % record the processing parameters of Patch1 as global attributes in the result nc file
        list_param=fieldnames(Param.ActionInput.Patch1)';
        list_param(strcmp('TestPatch1',list_param))=[];% remove 'TestPatch1' from the list of parameters
        Patch1_param=regexprep(list_param,'^.+','Patch1_$0');% insert 'Patch1_' before  each parameter name
        for ilist=1:length(list_param)
            Data.(Patch1_param{ilist})=Param.ActionInput.Patch1.(list_param{ilist});
        end
        Data.CivStage=3;% record the new state of processing
        Data.ListGlobalAttribute=[Data.ListGlobalAttribute Patch1_param];

        % list the variables to record
        nbvar=length(Data.ListVarName);
        Data.ListVarName=[Data.ListVarName {'Civ1_U_smooth','Civ1_V_smooth','Civ1_W_smooth'}];
        Data.VarDimName=[Data.VarDimName {{'npz','npy','npx'},{'npz','npy','npx'},{'npz','npy','npx'}}];
        Data.VarAttribute{nbvar+1}.Role='vector_x';
        Data.VarAttribute{nbvar+2}.Role='vector_y';
        Data.VarAttribute{nbvar+5}.Role='vector_z';      
        Data.Civ1_U_smooth=Data.Civ1_U;
        Data.Civ1_V_smooth=Data.Civ1_V; 
        Data.Civ1_W_smooth=Data.Civ1_W; 
        if isfield(Data,'Civ1_FF')
            ind_good=find(Data.Civ1_FF==0);
        else
            disp_uvmat('ERROR','detection of error vectors (FIX operation) needed before PATCH' ,checkrun)
            return
        end
        if isempty(ind_good)
            disp_uvmat('ERROR','all vectors of civ1 are bad, check input parameters' ,checkrun)
            return
        end

        % perform Patch calculation using the UVMAT fct 'filter_tps'
Civ1_Z=0.5*Data.Civ1_W(ind_good);
for iz=1:numel(Data.Coord_z)
    Civ1_Z(iz,:,:)=Civ1_Z(iz,:,:)+Data.Coord_z(iz);
end
        [Data.Civ1_SubRange,Data.Civ1_NbCentres,Data.Civ1_Coord_tps,Data.Civ1_U_tps,Data.Civ1_V_tps,Data.Civ1_W_tps,...
            Data.Civ1_U_smooth(ind_good),Data.Civ1_V_smooth(ind_good),Data.Civ1_V_smooth(ind_good),FFres]=...
            filter_tps_3D([Data.Civ1_X(ind_good) Data.Civ1_Y(ind_good)],Civ_1_Z,Data.Civ1_U(ind_good),Data.Civ1_V(ind_good),Data.Civ1_W(ind_good),Data.Patch1_SubDomainSize,Data.Patch1_FieldSmooth,Data.Patch1_MaxDiff);
        Data.Civ1_FF(ind_good)=uint8(FFres);
        time_patch1=toc(tstart_patch1);
        disp('patch1 performed')
    end

    %% Civ2
    if isfield (Param.ActionInput,'Civ2')
        disp('civ2 started')
        tstart_civ2=tic;
        par_civ2=Param.ActionInput.Civ2;
        % read input images
        par_civ2.ImageA=[];
        par_civ2.ImageB=[];
        if strcmp(Param.ActionInput.ListCompareMode,'displacement')
            ImageName_A_Civ2=Param.ActionInput.RefFile;
        else
            ImageName_A_Civ2=fullfile_uvmat(RootPath_A,SubDir_A,RootFile_A,FileExt_A,NomType_A,i1_civ2,[],j1_civ2);
        end
        if strcmp(ImageName_A_Civ2,ImageName_A) && isequal(FrameIndex_A_Civ1(ifield),FrameIndex_A_Civ2(ifield))
            par_civ2.ImageA=par_civ1.ImageA;
        else
            [par_civ2.ImageA,VideoObject_A] = read_image(ImageName_A_Civ2,FileType_A,VideoObject_A,FrameIndex_A_Civ2(ifield));
        end
        ImageName_B_Civ2=fullfile_uvmat(RootPath_B,SubDir_B,RootFile_B,FileExt_B,NomType_B,i2_civ2,[],j2_civ2);
        if strcmp(ImageName_B_Civ2,ImageName_B) && isequal(FrameIndex_B_Civ1(ifield),FrameIndex_B_Civ2)
            par_civ2.ImageB=par_civ1.ImageB;
        else
            [par_civ2.ImageB,VideoObject_B] = read_image(ImageName_B_Civ2,FileType_B,VideoObject_B,FrameIndex_B_Civ2(ifield));
        end
        [FileInfo_A,VideoObject_A]=get_file_info(ImageName_A_Civ2);
        par_civ2.ImageWidth=FileInfo_A.Width;
        par_civ2.ImageHeight=FileInfo_A.Height;
        if isfield(par_civ2,'Grid')% grid points set as input file
            if ischar(par_civ2.Grid)%read the grid file if the input is a file name
                par_civ2.Grid=dlmread(par_civ2.Grid);
                par_civ2.Grid(1,:)=[];%the first line must be removed (heading in the grid file)
            end
        else% automatic grid
            minix=floor(par_civ2.Dx/2)-0.5;
            maxix=minix+par_civ2.Dx*floor((par_civ2.ImageWidth-1)/par_civ2.Dx);
            miniy=floor(par_civ2.Dy/2)-0.5;
            maxiy=minix+par_civ2.Dy*floor((par_civ2.ImageHeight-1)/par_civ2.Dy);
            [GridX,GridY]=meshgrid(minix:par_civ2.Dx:maxix,miniy:par_civ2.Dy:maxiy);
            par_civ2.Grid(:,1)=reshape(GridX,[],1);
            par_civ2.Grid(:,2)=reshape(GridY,[],1);
        end
        % end

        % get the guess from patch1 or patch2 (case 'CheckCiv3')

        if isfield (par_civ2,'CheckCiv3') && par_civ2.CheckCiv3 %get the guess from  patch2
            SubRange= Data.Civ2_SubRange;
            NbCentres=Data.Civ2_NbCentres;
            Coord_tps=Data.Civ2_Coord_tps;
            U_tps=Data.Civ2_U_tps;
            V_tps=Data.Civ2_V_tps;
            CivStage=Data.CivStage;%store the current CivStage
            Civ1_Dt=Data.Civ2_Dt;
            Data=[];%reinitialise the result structure Data
            Data.ListGlobalAttribute={'Conventions','Program','CivStage'};
            Data.Conventions='uvmat/civdata';% states the conventions used for the description of field variables and attributes
            Data.Program='civ_series';
            Data.CivStage=CivStage+1;%update the current civStage after reinitialisation of Data
            Data.ListVarName={};
            Data.VarDimName={};
        else % get the guess from patch1
            SubRange= Data.Civ1_SubRange;
            NbCentres=Data.Civ1_NbCentres;
            Coord_tps=Data.Civ1_Coord_tps;
            U_tps=Data.Civ1_U_tps;
            V_tps=Data.Civ1_V_tps;
            Civ1_Dt=Data.Civ1_Dt;
            Data.CivStage=4;
        end

        Shiftx=zeros(size(par_civ2.Grid,1),1);% shift expected from civ1 data
        Shifty=zeros(size(par_civ2.Grid,1),1);
        nbval=zeros(size(par_civ2.Grid,1),1);% nbre of interpolated values at each grid point (from the different patch subdomains)

        NbSubDomain=size(SubRange,3);
        for isub=1:NbSubDomain% for each sub-domain of Patch1
            nbvec_sub=NbCentres(isub);% nbre of Civ vectors in the subdomain
            ind_sel=find(par_civ2.Grid(:,1)>=SubRange(1,1,isub) & par_civ2.Grid(:,1)<=SubRange(1,2,isub) &...
                par_civ2.Grid(:,2)>=SubRange(2,1,isub) & par_civ2.Grid(:,2)<=SubRange(2,2,isub));% grid points in the subdomain
            if ~isempty(ind_sel)
                epoints = par_civ2.Grid(ind_sel,:);% coordinates of interpolation sites (measurement grids)
                ctrs=Coord_tps(1:nbvec_sub,:,isub) ;%(=initial points) ctrs
                nbval(ind_sel)=nbval(ind_sel)+1;% records the number of values for each interpolation point (in case of subdomain overlap)
                EM = tps_eval(epoints,ctrs);% thin plate spline (tps) coefficient
                Shiftx(ind_sel)=Shiftx(ind_sel)+EM*U_tps(1:nbvec_sub+3,isub);%velocity shift estimated by tps from civ1
                Shifty(ind_sel)=Shifty(ind_sel)+EM*V_tps(1:nbvec_sub+3,isub);
            end
        end
        if par_civ2.CheckMask&&~isempty(par_civ2.Mask)
            if isfield(par_civ2,'NbSlice')
                [RootPath_mask,SubDir_mask,RootFile_mask,i1_mask,i2_mask,j1_mask,j2_mask,Ext_mask]=fileparts_uvmat(Param.ActionInput.Civ2.Mask);
                i1_mask=mod(i1-1,par_civ2.NbSlice)+1;
                maskname=fullfile_uvmat(RootPath_mask,SubDir_mask,RootFile_mask,Ext_mask,'_1',i1_mask);
            else
                maskname=Param.ActionInput.Civ2.Mask;
            end
            if strcmp(maskoldname,maskname)% mask exist, not already read in civ1
                par_civ2.Mask=mask; %use mask already opened
            else
                if exist(maskname,'file')
                    try
                        par_civ2.Mask=imread(maskname);%update the mask, an store it for future use
                    catch ME
                        if ~isempty(ME.message)
                            errormsg=['error reading input image: ' ME.message];
                            disp_uvmat('ERROR',errormsg,checkrun)
                            return
                        end
                    end
                else
                    par_civ2.Mask=[];
                end
                mask=par_civ2.Mask;
                maskoldname=maskname;
            end
        end


        if strcmp(Param.ActionInput.ListCompareMode,'displacement')
            Civ1_Dt=1;
            Civ2_Dt=1;
        else
            Civ2_Dt=Time(i2_civ2+1,j2_civ2+1)-Time(i1_civ2+1,j1_civ2+1);
        end

        par_civ2.SearchBoxShift=(Civ2_Dt/Civ1_Dt)*[Shiftx(nbval>=1)./nbval(nbval>=1) Shifty(nbval>=1)./nbval(nbval>=1)];
        % shift the grid points by half the expected shift to provide the correlation box position in image A
        par_civ2.Grid=[par_civ2.Grid(nbval>=1,1)-par_civ2.SearchBoxShift(:,1)/2 par_civ2.Grid(nbval>=1,2)-par_civ2.SearchBoxShift(:,2)/2];
        if par_civ2.CheckDeformation
            par_civ2.DUDX=DUDX(nbval>=1)./nbval(nbval>=1);
            par_civ2.DUDY=DUDY(nbval>=1)./nbval(nbval>=1);
            par_civ2.DVDX=DVDX(nbval>=1)./nbval(nbval>=1);
            par_civ2.DVDY=DVDY(nbval>=1)./nbval(nbval>=1);
        end

        % calculate velocity data (y and v in image indices, reverse to y component)

        [xtable, ytable, utable, vtable, ctable, F,result_conv,errormsg] = civ (par_civ2);

        list_param=(fieldnames(Param.ActionInput.Civ2))';
        list_param(strcmp('TestCiv2',list_param))=[];% remove the parameter TestCiv2 from the list
        Civ2_param=regexprep(list_param,'^.+','Civ2_$0');% insert 'Civ2_' before  each string in list_param
        Civ2_param=[{'Civ2_ImageA','Civ2_ImageB','Civ2_Time','Civ2_Dt'} Civ2_param]; %insert the names of the two input images
        %indicate the values of all the global attributes in the output data
        if exist('ImageName_A','var')
            Data.Civ2_ImageA=ImageName_A;
            Data.Civ2_ImageB=ImageName_B;
            if strcmp(Param.ActionInput.ListCompareMode,'displacement')
                Data.Civ2_Time=Time(i2_civ2+1,j2_civ2+1);% the Time is the Time of the secodn image
                Data.Civ2_Dt=1;% Time interval is 1, to yield displacement instead of velocity=displacement/Dt at reading
            else
                Data.Civ2_Time=(Time(i2_civ2+1,j2_civ2+1)+Time(i1_civ2+1,j1_civ2+1))/2;
                Data.Civ2_Dt=Civ2_Dt;
            end
        end
        for ilist=1:length(list_param)
            Data.(Civ2_param{4+ilist})=Param.ActionInput.Civ2.(list_param{ilist});
        end
        Data.ListGlobalAttribute=[Data.ListGlobalAttribute Civ2_param];

        nbvar=numel(Data.ListVarName);
        % define the Civ2 variable (if Civ2 data are not replaced from previous calculation)
        if isempty(find(strcmp('Civ2_X',Data.ListVarName),1))
            Data.ListVarName=[Data.ListVarName {'Civ2_X','Civ2_Y','Civ2_U','Civ2_V','Civ2_C','Civ2_FF'}];%  cell array containing the names of the fields to record
            Data.VarDimName=[Data.VarDimName {'nb_vec_2','nb_vec_2','nb_vec_2','nb_vec_2','nb_vec_2','nb_vec_2'}];
            Data.VarAttribute{nbvar+1}.Role='coord_x';
            Data.VarAttribute{nbvar+2}.Role='coord_y';
            Data.VarAttribute{nbvar+3}.Role='vector_x';
            Data.VarAttribute{nbvar+4}.Role='vector_y';
            Data.VarAttribute{nbvar+5}.Role='ancillary';
            Data.VarAttribute{nbvar+6}.Role='errorflag';
        end
        Data.Civ2_X=reshape(xtable,[],1);
        Data.Civ2_Y=reshape(size(par_civ2.ImageA,1)-ytable+1,[],1);
        Data.Civ2_U=reshape(utable,[],1);
        Data.Civ2_V=reshape(-vtable,[],1);
        Data.Civ2_C=reshape(ctable,[],1);
        Data.Civ2_FF=reshape(F,[],1);
        disp('civ2 performed')
        time_civ2=toc(tstart_civ2);
    elseif ~isfield(Data,'ListVarName') % we start there, using existing Civ2 data
        if exist('ncfile','var')
            CivFile=ncfile;
            [Data,~,~,errormsg]=nc2struct(CivFile);%read civ1 and detect_false1 data in the existing netcdf file
            if ~isempty(errormsg)
                disp_uvmat('ERROR',errormsg,checkrun)
                return
            end
        end
    end

    %% Fix2
    if isfield (Param.ActionInput,'Fix2')
        disp('detect_false2 started')
        list_param=fieldnames(Param.ActionInput.Fix2)';
        Fix2_param=regexprep(list_param,'^.+','Fix2_$0');% insert 'Fix1_' before  each string in ListFixParam
        %indicate the values of all the global attributes in the output data
        for ilist=1:length(list_param)
            Data.(Fix2_param{ilist})=Param.ActionInput.Fix2.(list_param{ilist});
        end
        Data.ListGlobalAttribute=[Data.ListGlobalAttribute Fix2_param];
        Data.Civ2_FF=detect_false(Param.ActionInput.Fix2,Data.Civ2_C,Data.Civ2_U,Data.Civ2_V,Data.Civ2_FF);
        Data.CivStage=Data.CivStage+1;
    end

    %% Patch2
    if isfield (Param.ActionInput,'Patch2')
        disp('patch2 started')
        tstart_patch2=tic;
        list_param=fieldnames(Param.ActionInput.Patch2)';
        list_param(strcmp('TestPatch2',list_param))=[];% remove the parameter TestCiv1 from the list
        Patch2_param=regexprep(list_param,'^.+','Patch2_$0');% insert 'Fix1_' before  each string in ListFixParam
        %indicate the values of all the global attributes in the output data
        for ilist=1:length(list_param)
            Data.(Patch2_param{ilist})=Param.ActionInput.Patch2.(list_param{ilist});
        end
        Data.ListGlobalAttribute=[Data.ListGlobalAttribute Patch2_param];

        nbvar=length(Data.ListVarName);
        Data.ListVarName=[Data.ListVarName {'Civ2_U_smooth','Civ2_V_smooth','Civ2_SubRange','Civ2_NbCentres','Civ2_Coord_tps','Civ2_U_tps','Civ2_V_tps'}];
        Data.VarDimName=[Data.VarDimName {'nb_vec_2','nb_vec_2',{'nb_coord','nb_bounds','nb_subdomain_2'},{'nb_subdomain_2'},...
            {'nb_tps_2','nb_coord','nb_subdomain_2'},{'nb_tps_2','nb_subdomain_2'},{'nb_tps_2','nb_subdomain_2'}}];

        Data.VarAttribute{nbvar+1}.Role='vector_x';
        Data.VarAttribute{nbvar+2}.Role='vector_y';
        Data.VarAttribute{nbvar+5}.Role='coord_tps';
        Data.VarAttribute{nbvar+6}.Role='vector_x';
        Data.VarAttribute{nbvar+7}.Role='vector_y';
        Data.Civ2_U_smooth=Data.Civ2_U;
        Data.Civ2_V_smooth=Data.Civ2_V;
        if isfield(Data,'Civ2_FF')
            ind_good=find(Data.Civ2_FF==0);
        else
            ind_good=1:numel(Data.Civ2_X);
        end
        if isempty(ind_good)
            disp_uvmat('ERROR','all vectors of civ2 are bad, check input parameters' ,checkrun)
            return
        end

        [Data.Civ2_SubRange,Data.Civ2_NbCentres,Data.Civ2_Coord_tps,Data.Civ2_U_tps,Data.Civ2_V_tps,tild,Ures,Vres,tild,FFres]=...
            filter_tps([Data.Civ2_X(ind_good) Data.Civ2_Y(ind_good)],Data.Civ2_U(ind_good),Data.Civ2_V(ind_good),[],Data.Patch2_SubDomainSize,Data.Patch2_FieldSmooth,Data.Patch2_MaxDiff);
        Data.Civ2_U_smooth(ind_good)=Ures;
        Data.Civ2_V_smooth(ind_good)=Vres;
        Data.Civ2_FF(ind_good)=FFres;
        Data.CivStage=Data.CivStage+1;
        time_patch2=toc(tstart_patch2);
        disp('patch2 performed')
    end

    %% write result in a netcdf file if requested
    % if CheckOutputFile
    errormsg=struct2nc(ncfile_out,Data);
    if isempty(errormsg)
        disp([ncfile_out ' written'])
        %[success,msg] = fileattrib(ncfile_out ,'+w','g');% done in struct2nc
    else
        disp(errormsg)
    end
    time_total=toc(tstart);
    disp(['ellapsed time ' num2str(time_total/60,2) ' minutes'])
    disp(['time civ1 ' num2str(time_civ1,2) ' s'])
    disp(['time patch1 ' num2str(time_patch1,2) ' s'])
    disp(['time civ2 ' num2str(time_civ2,2) ' s'])
    disp(['time patch2 ' num2str(time_patch2,2) ' s'])

end


% 'civ': function piv.m adapted from PIVlab http://pivlab.blogspot.com/
%--------------------------------------------------------------------------
% function [xtable ytable utable vtable typevector] = civ (image1,image2,ibx,iby step, subpixfinder, mask, roi)
%
% OUTPUT:
% xtable: set of x coordinates
% ytable: set of y coordiantes
% utable: set of u displacements (along x)
% vtable: set of v displacements (along y)
% ctable: max image correlation for each vector
% typevector: set of flags, =1 for good, =0 for NaN vectors
%
%INPUT:
% par_civ: structure of input parameters, with fields:
%  .ImageA: first image for correlation (matrix)
%  .ImageB: second image for correlation(matrix)
%  .CorrBoxSize: 1,2 vector giving the size of the correlation box in x and y
%  .SearchBoxSize:  1,2 vector giving the size of the search box in x and y
%  .SearchBoxShift: 1,2 vector or 2 column matrix (for civ2) giving the shift of the search box in x and y
%  .CorrSmooth: =1 or 2 determines the choice of the sub-pixel determination of the correlation max
%  .ImageWidth: nb of pixels of the image in x
%  .Dx, Dy: mesh for the PIV calculation
%  .Grid: grid giving the PIV calculation points (alternative to .Dx .Dy): centres of the correlation boxes in Image A
%  .Mask: name of a mask file or mask image matrix itself
%  .MinIma: thresholds for image luminosity
%  .MaxIma
%  .CheckDeformation=1 for subpixel interpolation and image deformation (linear transform)
%  .DUDX: matrix of deformation obtained from patch at each grid point
%  .DUDY
%  .DVDX:
%  .DVDY

function [xtable,ytable,utable,vtable,wtable,ctable,FF,result_conv,errormsg] = civ3D (par_civ)
%% check image sizes
[npz,npy_ima,npx_ima]=size(par_civ.ImageA);% npz = 
if ~isequal(size(par_civ.ImageB),[npz npy_ima npx_ima])
    errormsg='image pair with unequal size';
    return
end

%% prepare measurement grid
nbinterv_x=floor((npx_ima-1)/par_civ.Dx);
gridlength_x=nbinterv_x*par_civ.Dx;
minix=ceil((npx_ima-gridlength_x)/2);
nbinterv_y=floor((npy_ima-1)/par_civ.Dy);
gridlength_y=nbinterv_y*par_civ.Dy;
miniy=ceil((npy_ima-gridlength_y)/2);
[GridX,GridY]=meshgrid(minix:par_civ.Dx:npx_ima-1,miniy:par_civ.Dy:npy_ima-1);
par_civ.Grid(:,:,1)=GridX;
par_civ.Grid(:,:,2)=GridY;% increases with array index,
[nbvec_y,nbvec_x,~]=size(par_civ.Grid);


%% prepare correlation and search boxes
ibx2=floor(par_civ.CorrBoxSize(1)/2);
iby2=floor(par_civ.CorrBoxSize(2)/2);
isx2=par_civ.SearchRange(1);
isy2=par_civ.SearchRange(2);
isz2=par_civ.SearchRange(3);
kref=isz2+1;%middle index of the z slice
shiftx=round(par_civ.SearchBoxShift(:,1));%use the input shift estimate, rounded to the next integer value
shifty=-round(par_civ.SearchBoxShift(:,2));% sign minus because image j index increases when y decreases
if numel(shiftx)==1% case of a unique shift for the whole field( civ1)
    shiftx=shiftx*ones(nbvec_y,nbvec_x);
    shifty=shifty*ones(nbvec_y,nbvec_x);
end

%% Array initialisation and default output  if par_civ.CorrSmooth=0 (just the grid calculated, no civ computation)
xtable=round(par_civ.Grid(:,:,1)+0.5)-0.5;
%ytable=round(npy_ima-par_civ.Grid(:,:,2)+0.5)-0.5;% y index corresponding to the position in image coordiantes
ytable=round(par_civ.Grid(:,:,2)+0.5)-0.5;
utable=shiftx;
vtable=shifty;
wtable=zeros(size(utable));
ctable=zeros(nbvec_y,nbvec_x);
FF=false(nbvec_y,nbvec_x);
result_conv=[];
errormsg='';

%% prepare mask
check_MinIma=isfield(par_civ,'MinIma');% test for image luminosity threshold
check_MaxIma=isfield(par_civ,'MaxIma') && ~isempty(par_civ.MaxIma);

%% Apply mask
% Convention for mask, IDEAS NOT IMPLEMENTED
% mask >200 : velocity calculated
%  200 >=mask>150;velocity not calculated, interpolation allowed (bad spots)
% 150>=mask >100: velocity not calculated, nor interpolated
%  100>=mask> 20: velocity not calculated, impermeable (no flux through mask boundaries)
%  20>=mask: velocity=0
checkmask=0;
MinA=min(min(min(par_civ.ImageA)));
if isfield(par_civ,'Mask') && ~isempty(par_civ.Mask)
    checkmask=1;
    if ~isequal(size(par_civ.Mask),[npy_ima npx_ima])
        errormsg='mask must be an image with the same size as the images';
        return
    end
    check_undefined=(par_civ.Mask<200 & par_civ.Mask>=20 );% logical of the size of the image block =true for masked pixels
end

%% compute image correlations: MAINLOOP on velocity vectors
corrmax=0;
sum_square=1;% default
mesh=1;% default
% CheckDeformation=isfield(par_civ,'CheckDeformation')&& par_civ.CheckDeformation==1;
% if CheckDeformation
%     mesh=0.25;%mesh in pixels for subpixel image interpolation (x 4 in each direction)
%     par_civ.CorrSmooth=2;% use SUBPIX2DGAUSS (take into account more points near the max)
% end

if par_civ.CorrSmooth~=0 % par_civ.CorrSmooth=0 implies no civ computation (just input image and grid points given)
    for ivec_x=1:nbvec_x
        for ivec_y=1:nbvec_y
            iref=round(par_civ.Grid(ivec_y,ivec_x,1)+0.5);% xindex on the image A for the middle of the correlation box
            jref=round(npy_ima-par_civ.Grid(ivec_y,ivec_x,2)+0.5);%  j index  for the middle of the correlation box in the image A
            subrange1_x=iref-ibx2:iref+ibx2;% x indices defining the first subimage
            subrange1_y=jref-iby2:jref+iby2;% y indices defining the first subimage
            subrange2_x=iref+shiftx(ivec_y,ivec_x)-isx2:iref+shiftx(ivec_y,ivec_x)+isx2;%x indices defining the second subimage
            subrange2_y=jref+shifty(ivec_y,ivec_x)-isy2:jref+shifty(ivec_y,ivec_x)+isy2;%y indices defining the second subimage
            image1_crop=MinA*ones(npz,numel(subrange1_y),numel(subrange1_x));% default value=min of image A
            image2_crop=MinA*ones(npz,numel(subrange2_y),numel(subrange2_x));% default value=min of image A
            check1_x=subrange1_x>=1 & subrange1_x<=npx_ima;% check which points in the subimage 1 are contained in the initial image 1
            check1_y=subrange1_y>=1 & subrange1_y<=npy_ima;
            check2_x=subrange2_x>=1 & subrange2_x<=npx_ima;% check which points in the subimage 2 are contained in the initial image 2
            check2_y=subrange2_y>=1 & subrange2_y<=npy_ima;
            image1_crop(:,check1_y,check1_x)=par_civ.ImageA(:,subrange1_y(check1_y),subrange1_x(check1_x));%extract a subimage (correlation box) from image A
            image2_crop(:,check2_y,check2_x)=par_civ.ImageB(:,subrange2_y(check2_y),subrange2_x(check2_x));%extract a larger subimage (search box) from image B
            if checkmask% case of mask images
                mask1_crop=true(npz,2*iby2+1,2*ibx2+1);% default value=1 for mask
                mask2_crop=true(npz,2*isy2+1,2*isx2+1);% default value=1 for mask
                mask1_crop(npz,check1_y,check1_x)=check_undefined(npz,subrange1_y(check1_y),subrange1_x(check1_x));%extract a mask subimage (correlation box) from image A
                mask2_crop(npz,check2_y,check2_x)=check_undefined(npz,subrange2_y(check2_y),subrange2_x(check2_x));%extract a mask subimage (search box) from image B
                sizemask=sum(sum(mask1_crop,2),3)/(npz*(2*ibx2+1)*(2*iby2+1));%size of the masked part relative to the correlation sub-image
                if sizemask > 1/2% eliminate point if more than half of the correlation box is masked
                    FF(ivec_y,ivec_x)=1; %
                    utable(ivec_y,ivec_x)=NaN;
                    vtable(ivec_y,ivec_x)=NaN;
                else
                    image1_crop=image1_crop.*~mask1_crop;% put to zero the masked pixels (mask1_crop='true'=1)
                    image2_crop=image2_crop.*~mask2_crop;
                    image1_mean=mean(mean(image1_crop,2),3)/(1-sizemask);
                    image2_mean=mean(mean(image2_crop,2),3)/(1-sizemask);
                end
            else
                image1_mean=mean(mean(image1_crop,2),3);
                image2_mean=mean(mean(image2_crop,2),3);
            end
     
            if FF(ivec_y,ivec_x)==0
                if check_MinIma && (image1_mean < par_civ.MinIma || image2_mean < par_civ.MinIma)
                    FF(ivec_y,ivec_x)=1;       %threshold on image minimum
                
                elseif check_MaxIma && (image1_mean > par_civ.MaxIma || image2_mean > par_civ.MaxIma)
                    FF(ivec_y,ivec_x)=1;    %threshold on image maximum
                end
                if FF(ivec_y,ivec_x)==1
                    utable(ivec_y,ivec_x)=NaN;  
                    vtable(ivec_y,ivec_x)=NaN;
                else
                    % case of mask
                    % if checkmask
                    %     image1_crop=(image1_crop-image1_mean).*~mask1_crop;%substract the mean, put to zero the masked parts
                    %     image2_crop=(image2_crop-image2_mean).*~mask2_crop;% TO MODIFY !!!!!!!!!!!!!!!!!!!!!
                    % else
                    %     % image1_crop=(image1_crop-image1_mean);
                    %     % image2_crop=(image2_crop-image2_mean);
                    % end

                    npxycorr=2*par_civ.SearchRange(1:2)+1;
                    result_conv=zeros([2*par_civ.SearchRange(3)+1 npxycorr]);%initialise the conv product
                    max_xy=zeros(2*par_civ.SearchRange(3)+1,1);%initialise the max correlation vs z
                    xk=ones(npz,1);%initialise the x displacement corresponding to the max corr 
                    yk=ones(npz,1);%initialise the y displacement corresponding to the max corr 
                    subima1=squeeze(image1_crop(kref,:,:))-image1_mean(kref);
                    for kz=1:npz
                        subima2=squeeze(image2_crop(kz,:,:))-image2_mean(kz);   
                        correl_xy=conv2(subima2,flip(flip(subima1,2),1),'valid');
                        result_conv(kz,:,:)=correl_xy;
                        max_xy(kz)=max(max(correl_xy));             
                         [yk(kz),xk(kz)]=find(correl_xy==max_xy(kz),1);%find the indices of the maximum, use 0.999 to avoid rounding errors
                    end
                    [corrmax,dz]=max(max_xy);
                    result_conv=result_conv*255/corrmax;% normalise with a max =255
                    dx=xk(dz);
                    dy=yk(dz);
                    subimage2_crop=squeeze(image2_crop(dz,dy:dy+2*iby2/mesh,dx:dx+2*ibx2/mesh))-image2_mean(dz);%subimage of image 2 corresponding to the optimum displacement of first image
                    sum_square=sum(sum(subima1.*subima1));
                    sum_square=sum_square*sum(sum(subimage2_crop.*subimage2_crop));% product of variances of image 1 and 2
                    sum_square=sqrt(sum_square);% srt of the variance product to normalise correlation
                    % if ivec_x==3 && ivec_y==4
                    %     'test'
                    % end
                    if ~isempty(dz)&& ~isempty(dy) && ~isempty(dx)
                        if par_civ.CorrSmooth==1
                            [vector,FF(ivec_y,ivec_x)] = SUBPIXGAUSS (result_conv,dx,dy,dz);
                        elseif par_civ.CorrSmooth==2
                            [vector,FF(ivec_y,ivec_x)] = SUBPIX2DGAUSS (result_conv,dx,dy,dz);
                        else
                            [vector,FF(ivec_y,ivec_x)] = quadr_fit(result_conv,dx,dy,dz);
                        end
                        utable(ivec_y,ivec_x)=vector(1)+shiftx(ivec_y,ivec_x);
                        vtable(ivec_y,ivec_x)=vector(2)+shifty(ivec_y,ivec_x);
                        wtable(ivec_y,ivec_x)=vector(3);
                        xtable(ivec_y,ivec_x)=iref+utable(ivec_y,ivec_x)/2-0.5;% convec flow (velocity taken at the point middle from imgae 1 and 2)
                        ytable(ivec_y,ivec_x)=jref+vtable(ivec_y,ivec_x)/2-0.5;% and position of pixel 1=0.5 (convention for image coordinates=0 at the edge)
                        iref=round(xtable(ivec_y,ivec_x)+0.5);% nearest image index for the middle of the vector
                        jref=round(ytable(ivec_y,ivec_x)+0.5);
                       % if utable(ivec_y,ivec_x)==0 && vtable(ivec_y,ivec_x)==0
                       %     'test'
                       % end
                        % eliminate vectors located in the mask
                        if  checkmask && (iref<1 || jref<1 ||iref>npx_ima || jref>npy_ima ||( par_civ.Mask(jref,iref)<200 && par_civ.Mask(jref,iref)>=100))
                            utable(ivec_y,ivec_x)=0;
                            vtable(ivec_y,ivec_x)=0;
                            FF(ivec_y,ivec_x)=1;
                        end
                        ctable(ivec_y,ivec_x)=corrmax/sum_square;% correlation value
                    else
                        FF(ivec_y,ivec_x)=true;
                    end
                end
            end
        end
    end
end
result_conv=result_conv*corrmax/(255*sum_square);% keep the last correlation matrix for output

%------------------------------------------------------------------------
% --- Find the maximum of the correlation function after interpolation
% OUPUT:
% vector = optimum displacement vector with subpixel correction
% FF =flag: ='true' max too close to the edge of the search box (1 pixel margin)
% INPUT:
% x,y: position of the maximum correlation at integer values

function [vector,FF] = SUBPIXGAUSS (result_conv,x,y,z)
%------------------------------------------------------------------------

[npz,npy,npx]=size(result_conv);
result_conv(result_conv<1)=1; %set to 1 correlation values smaller than 1  (to avoid divergence in the log)
%the following 8 lines are copyright (c) 1998, Uri Shavit, Roi Gurka, Alex Liberzon, Technion ??? Israel Institute of Technology
%http://urapiv.wordpress.com
FF=false;
peakz=z;peaky=y;peakx=x;
if z < npz && z > 1 && y < npy && y > 1 && x < npx && x > 1
    f0 = log(result_conv(z,y,x));
    f1 = log(result_conv(z-1,y,x));
    f2 = log(result_conv(z+1,y,x));
    peakz = peakz+ (f1-f2)/(2*f1-4*f0+2*f2);

    f1 = log(result_conv(z,y-1,x));
    f2 = log(result_conv(z,y+1,x));
    peaky = peaky+ (f1-f2)/(2*f1-4*f0+2*f2);

    f1 = log(result_conv(z,y,x-1));
    f2 = log(result_conv(z,y,x+1));
    peakx = peakx+ (f1-f2)/(2*f1-4*f0+2*f2);
else
    FF=true;
end

vector=[peakx-floor(npx/2)-1 peaky-floor(npy/2)-1 peakz-floor(npz/2)-1];

%------------------------------------------------------------------------
% --- Find the maximum of the correlation function after interpolation
function [vector,F] = SUBPIX2DGAUSS (result_conv,x,y)
%------------------------------------------------------------------------
% vector=[0 0]; %default
F=1;
peaky=y;
peakx=x;
result_conv(result_conv<1)=1; %set to 1 correlation values smaller than 1 (to avoid divergence in the log)
[npy,npx]=size(result_conv);
if (x < npx) && (y < npy) && (x > 1) && (y > 1)
    F=0;
    for i=-1:1
        for j=-1:1
            %following 15 lines based on
            %H. Nobach ??? M. Honkanen (2005)
            %Two-dimensional Gaussian regression for sub-pixel displacement
            %estimation in particle image velocimetry or particle position
            %estimation in particle tracking velocimetry
            %Experiments in Fluids (2005) 38: 511???515
            c10(j+2,i+2)=i*log(result_conv(y+j, x+i));
            c01(j+2,i+2)=j*log(result_conv(y+j, x+i));
            c11(j+2,i+2)=i*j*log(result_conv(y+j, x+i));
            c20(j+2,i+2)=(3*i^2-2)*log(result_conv(y+j, x+i));
            c02(j+2,i+2)=(3*j^2-2)*log(result_conv(y+j, x+i));
        end
    end
    c10=(1/6)*sum(sum(c10));
    c01=(1/6)*sum(sum(c01));
    c11=(1/4)*sum(sum(c11));
    c20=(1/6)*sum(sum(c20));
    c02=(1/6)*sum(sum(c02));
    deltax=(c11*c01-2*c10*c02)/(4*c20*c02-c11^2);
    deltay=(c11*c10-2*c01*c20)/(4*c20*c02-c11^2);
    if abs(deltax)<1
        peakx=x+deltax;
    end
    if abs(deltay)<1
        peaky=y+deltay;
    end
end
vector=[peakx-floor(npx/2)-1 peaky-floor(npy/2)-1];

%------------------------------------------------------------------------
% --- Find the maximum of the correlation function after quadratic interpolation
function [vector,F] = quadr_fit(result_conv,x,y)
[npy,npx]=size(result_conv);
if x<4 || y<4 || npx-x<4 ||npy-y <4
    F=1;
    vector=[x y];
else
    F=0;
    x_ind=x-4:x+4;
    y_ind=y-4:y+4;
    x_vec=0.25*(x_ind-x);
    y_vec=0.25*(y_ind-y);
    [X,Y]=meshgrid(x_vec,y_vec);
    coord=[reshape(X,[],1) reshape(Y,[],1)];
    result_conv=reshape(result_conv(y_ind,x_ind),[],1);
    
    
    % n=numel(X);
    % x=[X Y];
    % X=X-0.5;
    % Y=Y+0.5;
    % y = (X.*X+2*Y.*Y+X.*Y+6) + 0.1*rand(n,1);
    p = polyfitn(coord,result_conv,2);
    A(1,1)=2*p.Coefficients(1);
    A(1,2)=p.Coefficients(2);
    A(2,1)=p.Coefficients(2);
    A(2,2)=2*p.Coefficients(4);
    vector=[x y]'-A\[p.Coefficients(3) p.Coefficients(5)]';
    vector=vector'-[floor(npx/2) floor(npy/2)]-1 ;
    % zg = polyvaln(p,coord);
    % figure
    % surf(x_vec,y_vec,reshape(zg,9,9))
    % hold on
    % plot3(X,Y,reshape(result_conv,9,9),'o')
    % hold off
end


function FF=detect_false(Param,C,U,V,FFIn)
FF=FFIn;%default, good vectors
% FF=1, for correlation max at edge, not set in this function
% FF=2, for too small correlation
% FF=3, for velocity outside bounds
% FF=4 for exclusion by difference with the smoothed field, not set in this function

if isfield (Param,'MinCorr')
     FF(C<Param.MinCorr & FFIn==0)=2;
end
if (isfield(Param,'MinVel')&&~isempty(Param.MinVel))||(isfield (Param,'MaxVel')&&~isempty(Param.MaxVel))
    Umod= U.*U+V.*V;
    if isfield (Param,'MinVel')&&~isempty(Param.MinVel)
        U2Min=Param.MinVel*Param.MinVel;
        FF(Umod<U2Min & FFIn==0)=3;
    end
    if isfield (Param,'MaxVel')&&~isempty(Param.MaxVel)
         U2Max=Param.MaxVel*Param.MaxVel;
        FF(Umod>U2Max & FFIn==0)=3;
    end
end

%------------------------------------------------------------------------
% --- determine the list of index pairs of processing file
function [i1_series,i2_series,j1_series,j2_series,check_bounds,NomTypeNc]=...
    find_pair_indices(str_civ,i_series,j_series,MinIndex_i,MaxIndex_i,MinIndex_j,MaxIndex_j)
%------------------------------------------------------------------------
i1_series=i_series;% set of first image indexes
i2_series=i_series;
j1_series=j_series;%ones(size(i_series));% set of first image numbers
j2_series=j_series;%ones(size(i_series));
r=regexp(str_civ,'^\D(?<ind>[i|j])=( -| )(?<num1>\d+)\|(?<num2>\d+)','names');
if ~isempty(r)
    mode=['D' r.ind];
    ind1=str2num(r.num1);
    ind2=str2num(r.num2);
else
    mode='j1-j2';
    r=regexp(str_civ,'^j= (?<num1>[a-z])-(?<num2>[a-z])','names');
    if ~isempty(r)
        NomTypeNc='_1ab';
    else
        r=regexp(str_civ,'^j= (?<num1>[A-Z])-(?<num2>[A-Z])','names');
        if ~isempty(r)
            NomTypeNc='_1AB';
        else
            r=regexp(str_civ,'^j= (?<num1>\d+)-(?<num2>\d+)','names');
            if ~isempty(r)
                NomTypeNc='_1_1-2';
            end
        end
    end
    if isempty(r)
        display('wrong pair mode input option')
    else
        ind1=stra2num(r.num1);
        ind2=stra2num(r.num2);
    end
end
switch mode
    case 'Di'
        i1_series=i_series-ind1;% set of first image numbers
        i2_series=i_series+ind2;
        check_bounds=i1_series<MinIndex_i | i2_series>MaxIndex_i;
        if isempty(j_series)
            NomTypeNc='_1-2';
        else
            j1_series=j_series;
            j2_series=j_series;
            NomTypeNc='_1-2_1';
        end
    case 'Dj'
        j1_series=j_series-ind1;
        j2_series=j_series+ind2;
        check_bounds=j1_series<MinIndex_j | j2_series>MaxIndex_j;
        NomTypeNc='_1_1-2';
    otherwise %bursts
        i1_series=i_series(1,:);% do not sweep the j index
        i2_series=i_series(1,:);
        j1_series=ind1*ones(1,size(i_series,2));% j index is fixed by pair choice
        j2_series=ind2*ones(1,size(i_series,2));
        check_bounds=zeros(size(i1_series));% no limitations due to min-max indices
end