source: trunk/src/series/extract_multitif_parallel.m @ 977

Last change on this file since 977 was 977, checked in by g7moreau, 8 years ago
  • Update Copyright 2008-2017 notice
File size: 10.6 KB
Line 
1%'ima2netcdf': read image series and transform to netcdf
2%------------------------------------------------------------------------
3
4   
5% function ParamOut=ima2netcdf(Param)
6%
7%%%%%%%%%%% GENERAL TO ALL SERIES ACTION FCTS %%%%%%%%%%%%%%%%%%%%%%%%%%%
8%
9%OUTPUT
10% ParamOut: sets options in the GUI series.fig needed for the function
11%
12%INPUT:
13% In run mode, the input parameters are given as a Matlab structure Param copied from the GUI series.
14% In batch mode, Param is the name of the corresponding xml file containing the same information
15% when Param.Action.RUN=0 (as activated when the current Action is selected
16% in series), the function ouput paramOut set the activation of the needed GUI elements
17%
18% Param contains the elements:(use the menu bar command 'export/GUI config' in series to
19% see the current structure Param)
20%    .InputTable: cell of input file names, (several lines for multiple input)
21%                      each line decomposed as {RootPath,SubDir,Rootfile,NomType,Extension}
22%    .OutputSubDir: name of the subdirectory for data outputs
23%    .OutputDirExt: directory extension for data outputs
24%    .Action: .ActionName: name of the current activated function
25%             .ActionPath:   path of the current activated function
26%             .ActionExt: fct extension ('.m', Matlab fct, '.sh', compiled   Matlab fct
27%             .RUN =0 for GUI input, =1 for function activation
28%             .RunMode='local','background', 'cluster': type of function  use
29%             
30%    .IndexRange: set the file or frame indices on which the action must be performed
31%    .FieldTransform: .TransformName: name of the selected transform function
32%                     .TransformPath:   path  of the selected transform function
33%    .InputFields: sub structure describing the input fields withfields
34%              .FieldName: name(s) of the field
35%              .VelType: velocity type
36%              .FieldName_1: name of the second field in case of two input series
37%              .VelType_1: velocity type of the second field in case of two input series
38%              .Coord_y: name of y coordinate variable
39%              .Coord_x: name of x coordinate variable
40%    .ProjObject: %sub structure describing a projection object (read from ancillary GUI set_object)
41%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
42
43%=======================================================================
44% Copyright 2008-2017, LEGI UMR 5519 / CNRS UGA G-INP, Grenoble, France
45%   http://www.legi.grenoble-inp.fr
46%   Joel.Sommeria - Joel.Sommeria (A) legi.cnrs.fr
47%
48%     This file is part of the toolbox UVMAT.
49%
50%     UVMAT is free software; you can redistribute it and/or modify
51%     it under the terms of the GNU General Public License as published
52%     by the Free Software Foundation; either version 2 of the license,
53%     or (at your option) any later version.
54%
55%     UVMAT is distributed in the hope that it will be useful,
56%     but WITHOUT ANY WARRANTY; without even the implied warranty of
57%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
58%     GNU General Public License (see LICENSE.txt) for more details.
59%=======================================================================
60
61function ParamOut=ima2netcdf(Param)
62
63%%%%%%%%%%%%%%%%%    INPUT PREPARATION MODE (no RUN)    %%%%%%%%%%%%%%%%%
64if isstruct(Param) && isequal(Param.Action.RUN,0)
65    ParamOut.AllowInputSort='off';% allow alphabetic sorting of the list of input file SubDir (options 'off'/'on', 'off' by default)
66    ParamOut.WholeIndexRange='on';% prescribes the file index ranges from min to max (options 'off'/'on', 'off' by default)
67    ParamOut.NbSlice='off'; % impose calculation in a single process (no parallel processing to avoid 'holes'))
68    ParamOut.VelType='off';% menu for selecting the velocity type (options 'off'/'one'/'two',  'off' by default)
69    ParamOut.FieldName='off';% menu for selecting the field (s) in the input file(options 'off'/'one'/'two', 'off' by default)
70    ParamOut.FieldTransform = 'off';%can use a transform function
71    ParamOut.ProjObject='off';%can use projection object(option 'off'/'on',
72    ParamOut.Mask='off';%can use mask option   (option 'off'/'on', 'off' by default)
73    ParamOut.OutputDirExt='.png';%set the output dir extension
74    ParamOut.OutputFileMode='NbSlice';% '=NbInput': 1 output file per input file index, '=NbInput_i': 1 file per input file index i, '=NbSlice': 1 file per slice
75      ParamOut.CheckOverwriteVisible='on'; % manage the overwrite of existing files (default=1)
76    %% root input file(s) and type
77    % check the existence of the first file in the series
78        first_j=[];% note that the function will propose to cover the whole range of indices
79    if isfield(Param.IndexRange,'MinIndex_j'); first_j=Param.IndexRange.MinIndex_j; end
80    last_j=[];
81    if isfield(Param.IndexRange,'MaxIndex_j'); last_j=Param.IndexRange.MaxIndex_j; end
82    PairString='';
83    if isfield(Param.IndexRange,'PairString'); PairString=Param.IndexRange.PairString; end
84    [i1,i2,j1,j2] = get_file_index(Param.IndexRange.first_i,first_j,PairString);
85    FirstFileName=fullfile_uvmat(Param.InputTable{1,1},Param.InputTable{1,2},Param.InputTable{1,3},...
86        Param.InputTable{1,5},Param.InputTable{1,4},i1,i2,j1,j2);
87    if ~exist(FirstFileName,'file')
88        msgbox_uvmat('WARNING',['the first input file ' FirstFileName ' does not exist'])
89    end
90
91    %% check the validity of  input file types
92    FileInfo=get_file_info(FirstFileName);
93    if ~strcmp(FileInfo.FileType,'multimage')
94        msgbox_uvmat('ERROR',['invalid file type input: ' FileInfo.FileType ' not an image'])
95        return
96    end
97    xmlinput=uigetfile_uvmat('pick xml file for timing',fileparts(fileparts(FirstFileName)),'.xml');
98    [tild,ParamOut.ActionInput.XmlFile]=fileparts(xmlinput);
99    ParamOut.ActionInput.XmlFile
100   
101    return
102end
103%%%%%%%%%%%%%%%%%    STOP HERE FOR PAMETER INPUT MODE   %%%%%%%%%%%%%%%%%
104
105%% read input parameters from an xml file if input is a file name (batch mode)
106checkrun=1;
107RUNHandle=[];
108WaitbarHandle=[];
109if ischar(Param)
110    Param=xml2struct(Param);% read Param as input file (batch case)
111    checkrun=0;
112else
113    hseries=findobj(allchild(0),'Tag','series');
114    RUNHandle=findobj(hseries,'Tag','RUN');%handle of RUN button in GUI series
115    WaitbarHandle=findobj(hseries,'Tag','Waitbar');%handle of waitbar in GUI series
116end
117
118%% list of input images
119% DirImages=fullfile(Param.InputTable{1,1},Param.InputTable{1,2});
120% ListStruct=dir(DirImages);
121% ListCells=struct2cell(ListStruct);% transform dir struct to a cell arrray
122% check_bad=strcmp('.',ListCells(1,:))|strcmp('..',ListCells(1,:));%detect the dir '.' to exclude it
123% check_dir=cell2mat(ListCells(4,:));% =1 for directories, =0 for files
124% ListFile=ListCells(1,find(~check_dir & ~check_bad));
125
126%% check file names
127% RootName=regexprep(ListFile{1},'.tif$','')
128% rank(1)=1;
129% for ilist=2:numel(ListFile)
130%     rank_str=regexprep(ListFile{ilist},'.tif$','');
131%     rank(ilist)=regexprep(rank_str,['^' RootName '@'],'');
132% %     if ~isequal(str2num(rank),ilist-1)
133% %         disp(['error in the list of input file # ' num2str(ilist-1)])
134% %         return
135% %     end
136% end
137
138%% output directory
139OutputDir=fullfile(Param.InputTable{1,1},[Param.OutputSubDir Param.OutputDirExt]);
140
141%% Timing
142XmlInputFile=fullfile(Param.InputTable{1,1},[Param.ActionInput.XmlFile '.xml'])
143XmlInput=imadoc2struct(XmlInputFile,'Camera');
144
145%% Main loop
146
147ImagesPerLevel=size(XmlInput.Time,2)-1;%100;
148% count=0;
149%count=316;%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%CORRECTION EXP08: 4684 images -> start at 316 start 67->_11_1
150%count=1934%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%CORRECTION EXP07: 3066 images
151%% loop on the files
152%for ifile=1:numel(ListFile)
153%     update_waitbar(WaitbarHandle,ifile/numel(ListFile))
154%     if ~isempty(RUNHandle)&& ~strcmp(get(RUNHandle,'BusyAction'),'queue')
155%         disp('program stopped by user')
156%         break
157%     end
158%    ImageName=fullfile(DirImages,ListFile{ifile});
159%   NbFrames=numel(imfinfo(ImageName));
160% loop on the frames within the tiff file
161if Param.IndexRange.first_i==1% first slice of processing
162    firstindex=0;
163   count=0;
164%     count=3;
165else
166    firstindex=Param.IndexRange.first_i;
167    ImageName=fullfile(Param.InputTable{1,1},Param.InputTable{1,2},'im.tif');
168    NbFrames=numel(imfinfo(ImageName));
169   count=Param.IndexRange.first_i*NbFrames;
170 %   count=Param.IndexRange.first_i*NbFrames+3;
171end
172for ifile=firstindex:Param.IndexRange.last_i
173    if firstindex==0 && ifile==0% first slice of processing
174            ImageName=fullfile(Param.InputTable{1,1},Param.InputTable{1,2},'im.tif')
175    else
176        ImageName=fullfile(Param.InputTable{1,1},Param.InputTable{1,2},['im@' num2str(ifile,'%04d') '.tif'])
177    end
178    NbFrames=numel(imfinfo(ImageName));
179    for iframe=1:NbFrames
180        iframe
181        if isequal(ImagesPerLevel,1)% mode series
182            OutputFile=fullfile(OutputDir,['img_' num2str(count+1) '.png']);
183        else % indices i and j
184            i_index=fix(count/ImagesPerLevel)+1;
185            j_index=mod(count,ImagesPerLevel)+1;
186            OutputFile=fullfile(OutputDir,['img_' num2str(i_index) '_' num2str(j_index) '.png']);
187        end
188        if Param.CheckOverwrite ||~exist(OutputFile,'file')
189            A=imread(ImageName,iframe);
190            imwrite(A,OutputFile,'BitDepth',16);
191            disp([OutputFile ' written'])
192        else
193            disp([OutputFile ' already exists'])
194        end
195        count=count+1;
196    end
197end
198    %end
199
200% for ifile=1:numel(ListFile)
201%     update_waitbar(WaitbarHandle,ifile/numel(ListFile))
202%     if ~isempty(RUNHandle)&& ~strcmp(get(RUNHandle,'BusyAction'),'queue')
203%         disp('program stopped by user')
204%         break
205%     end
206%     ImageName=fullfile(DirImages,ListFile{ifile});
207%     NbFrames=numel(imfinfo(ImageName));
208%     % loop on the frames within the tiff file
209%     for iframe=1:NbFrames     
210%         A=imread(ImageName,iframe);
211%
212%         if isequal(ImagesPerLevel,1)% mode series
213%             i_index=count+1;
214%             OutputFile=fullfile(OutputDir,['img_' num2str(count+1) '.png']);
215%         else % indices i and j
216%             i_index=fix(count/ImagesPerLevel)+1;
217%             j_index=mod(count,ImagesPerLevel)+1;
218%             OutputFile=fullfile(OutputDir,['img_' num2str(i_index) '_' num2str(j_index) '.png']);
219%         end
220%         imwrite(A,OutputFile,'BitDepth',16)
221%         count=count+1;
222%     end
223% end
224
225%% create the xml file of PCO camera
226% XmlInput.Camera.CameraName='PCO';
227% t=struct2xml(XmlInput.Camera);
228% t=set(t,1,'name','ImaDoc');
229% save(t,fullfile(Param.InputTable{1,1},'PCO.xml'))
230
231%% remove initial files if transfer OK
232%     if i_index== (size(XmlInput.Time,1)-1)
233%
234%         [SUCCESS,MESSAGE]=rmdir(DirImages,'s')
235%       
236%     end
Note: See TracBrowser for help on using the repository browser.