source: trunk/src/series/sub_background.m @ 934

%'sub_background': substract a sliding background to an image series
%------------------------------------------------------------------------
% Method: 
    %calculate the background image by sorting the luminosity of each point
    % over a sliding sub-sequence of 'nbaver_ima' images. 
    % The luminosity value of rank 'rank' is selected as the
    % 'background'. rank=nbimages/2 gives the median value.  Smaller values are appropriate
    % for a dense set of particles. The extrem value rank=1 gives the true minimum
    % luminosity, but it can be polluted by noise. 
% Organization of image indices:
    % The program is working on a series of images, 
    % In the mode 'volume', nbfield2=1 (1 image at each level)and NbSlice (=nbfield_j)
    % Else nbfield2=nbfield_j =nbre of images in a burst (j index)
    
% function GUI_config=sub_background(Param)
%
%%%%%%%%%%% GENERAL TO ALL SERIES ACTION FCTS %%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%OUTPUT
% ParamOut: sets options in the GUI series.fig needed for the function
%
%INPUT:
% In run mode, the input parameters are given as a Matlab structure Param copied from the GUI series.
% In batch mode, Param is the name of the corresponding xml file containing the same information
% when Param.Action.RUN=0 (as activated when the current Action is selected
% in series), the function ouput paramOut set the activation of the needed GUI elements
%
% Param contains the elements:(use the menu bar command 'export/GUI config' in series to 
% see the current structure Param)
%    .InputTable: cell of input file names, (several lines for multiple input)
%                      each line decomposed as {RootPath,SubDir,Rootfile,NomType,Extension}
%    .OutputSubDir: name of the subdirectory for data outputs
%    .OutputDirExt: directory extension for data outputs
%    .Action: .ActionName: name of the current activated function
%             .ActionPath:   path of the current activated function
%             .ActionExt: fct extension ('.m', Matlab fct, '.sh', compiled   Matlab fct
%             .RUN =0 for GUI input, =1 for function activation
%             .RunMode='local','background', 'cluster': type of function  use
%             
%    .IndexRange: set the file or frame indices on which the action must be performed
%    .FieldTransform: .TransformName: name of the selected transform function
%                     .TransformPath:   path  of the selected transform function
%    .InputFields: sub structure describing the input fields withfields
%              .FieldName: name(s) of the field
%              .VelType: velocity type
%              .FieldName_1: name of the second field in case of two input series
%              .VelType_1: velocity type of the second field in case of two input series
%              .Coord_y: name of y coordinate variable
%              .Coord_x: name of x coordinate variable
%    .ProjObject: %sub structure describing a projection object (read from ancillary GUI set_object)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%=======================================================================
% Copyright 2008-2016, LEGI UMR 5519 / CNRS UGA G-INP, Grenoble, France
%   http://www.legi.grenoble-inp.fr
%   Joel.Sommeria - Joel.Sommeria (A) legi.cnrs.fr
%
%     This file is part of the toolbox UVMAT.
%
%     UVMAT is free software; you can redistribute it and/or modify
%     it under the terms of the GNU General Public License as published
%     by the Free Software Foundation; either version 2 of the license,
%     or (at your option) any later version.
%
%     UVMAT is distributed in the hope that it will be useful,
%     but WITHOUT ANY WARRANTY; without even the implied warranty of
%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%     GNU General Public License (see LICENSE.txt) for more details.
%=======================================================================

function ParamOut=sub_background (Param)

%%%%%%%%%%%%%%%%%    INPUT PREPARATION MODE (no RUN)    %%%%%%%%%%%%%%%%%
if isstruct(Param) && isequal(Param.Action.RUN,0)
    ParamOut.AllowInputSort='off';% allow alphabetic sorting of the list of input file SubDir (options 'off'/'on', 'off' by default)
    ParamOut.WholeIndexRange='on';% prescribes the file index ranges from min to max (options 'off'/'on', 'off' by default)
    ParamOut.NbSlice='on'; % edit box nbre of slices made active
    ParamOut.VelType='off';% menu for selecting the velocity type (options 'off'/'one'/'two',  'off' by default)
    ParamOut.FieldName='off';% menu for selecting the field (s) in the input file(options 'off'/'one'/'two', 'off' by default)
    ParamOut.FieldTransform = 'off';%can use a transform function
    ParamOut.ProjObject='off';%can use projection object(option 'off'/'on',
    ParamOut.Mask='off';%can use mask option   (option 'off'/'on', 'off' by default)
    ParamOut.OutputDirExt='.sback';%set the output dir extension
    ParamOut.OutputFileMode='NbInput';% '=NbInput': 1 output file per input file index, '=NbInput_i': 1 file per input file index i, '=NbSlice': 1 file per slice
    
    %% root input file(s) and type
    % check the existence of the first file in the series
        first_j=[];% note that the function will propose to cover the whole range of indices
    if isfield(Param.IndexRange,'MinIndex_j'); first_j=Param.IndexRange.MinIndex_j; end
    last_j=[];
    if isfield(Param.IndexRange,'MaxIndex_j'); last_j=Param.IndexRange.MaxIndex_j; end
    PairString='';
    if isfield(Param.IndexRange,'PairString'); PairString=Param.IndexRange.PairString; end
    [i1,i2,j1,j2] = get_file_index(Param.IndexRange.first_i,first_j,PairString);
    FirstFileName=fullfile_uvmat(Param.InputTable{1,1},Param.InputTable{1,2},Param.InputTable{1,3},...
        Param.InputTable{1,5},Param.InputTable{1,4},i1,i2,j1,j2);
    if ~exist(FirstFileName,'file')
        msgbox_uvmat('WARNING',['the first input file ' FirstFileName ' does not exist'])
    else
        [i1,i2,j1,j2] = get_file_index(Param.IndexRange.last_i,last_j,PairString);
        LastFileName=fullfile_uvmat(Param.InputTable{1,1},Param.InputTable{1,2},Param.InputTable{1,3},...
        Param.InputTable{1,5},Param.InputTable{1,4},i1,i2,j1,j2);
        if ~exist(FirstFileName,'file')
             msgbox_uvmat('WARNING',['the last input file ' LastFileName ' does not exist'])
        end
    end

    %% check the validity of  input file types
    ImageTypeOptions={'image','multimage','mmreader','video'};%allowed input file types(images)
    FileInfo=get_file_info(FirstFileName);
    FileType=FileInfo.FileType;
    CheckImage=~isempty(find(strcmp(FileType,ImageTypeOptions), 1));% =1 for images
    if ~CheckImage
        msgbox_uvmat('ERROR',['invalid file type input: ' FileType ' not an image'])
        return
    end
    
    %% numbers of fields
    NbSlice_i=1;%default
    if isfield(Param.IndexRange,'NbSlice')&&~isempty(Param.IndexRange.NbSlice)
        NbSlice_i=Param.IndexRange.NbSlice;
    end
    incr_j=1;%default
    if isfield(Param.IndexRange,'incr_j')&&~isempty(Param.IndexRange.incr_j)
        incr_j=Param.IndexRange.incr_j;
    end
    if isempty(first_j)||isempty(last_j)
        nbfield_j=1;
    else
        nbfield_j=numel(first_j:incr_j:last_j);%nb of fields for the j index (bursts or volume slices)
    end
    first_i=1;last_i=1;incr_i=1;%default
    if isfield(Param.IndexRange,'MinIndex_i'); first_i=Param.IndexRange.MinIndex_i; end   
    if isfield(Param.IndexRange,'MaxIndex_i'); last_i=Param.IndexRange.MaxIndex_i; end
    if isfield(Param.IndexRange,'incr_i')&&~isempty(Param.IndexRange.incr_i)
        incr_i=Param.IndexRange.incr_i;
    end
    nbfield_i=numel(first_i:incr_i:last_i);%nb of fields for the i index (bursts or volume slices)
    nbfield=nbfield_j*nbfield_i; %total number of fields
    nbfield_i=floor(nbfield/NbSlice_i);%total number of  indexes in a slice (adjusted to an integer number of slices)
    
    %% setting of  parameters specific to sub_background
    nbaver_init=23; %default number of images used for the sliding background: to be adjusted later to include an integer number of bursts  
    if nbfield_i~=1
        nbaver=floor(nbaver_init/nbfield_j); % number of bursts used for the sliding background,
        if isequal(mod(nbaver,2),0)% if nbaver is even
            nbaver=nbaver+1;%put the number of burst to an odd number (so the middle burst is defined)
        end
        nbaver_init=nbaver*nbfield_j;%propose by default an integer number of bursts
    end
    
    prompt = {'volume scan mode (Yes/No)';'Number of images for the sliding background (MUST FIT IN COMPUTER MEMORY)';...
        'the luminosity rank chosen to define the background (0.1=for dense particle seeding, 0.5 (median) for sparse particles'};
    dlg_title = 'get (slice by slice) a sliding background and substract to each image';
    num_lines= 3;
    def     = { 'No';num2str(nbaver_init);'0.1'};
    answer = inputdlg(prompt,dlg_title,num_lines,def);
    if isempty(answer)
        return
    end
    %check input consistency
    if strcmp(answer{1},'No') && ~isequal(NbSlice_i,1)
        check=msgbox_uvmat('INPUT_Y-N',['confirm the multi-level splitting into ' num2str(NbSlice_i) ' slices']);
        if ~strcmp(check,'Yes')
            return
        end
    end
    if strcmp(answer{1},'Yes')
        step=2;%the sliding background is shifted by the length of one burst, assumed =2 for volume ;ode
        ParamOut.NbSlice=1; %nbre of slices displayed 
    else
        step=nbfield_j;%case of bursts: the sliding background is shifted by the length of one burst
    end
    nbaver_ima=str2double(answer{2});%number of images for the sliding background
    nbaver=ceil(nbaver_ima/step);%number of bursts for the sliding background
    if isequal(mod(nbaver,2),0)% if nbaver is even
        nbaver=nbaver+1;%set the number of bursts to an odd number (so the middle burst is defined)
    end
    nbaver_ima=nbaver*step;% correct the nbre of images corresponding to nbaver
    ParamOut.ActionInput.CheckVolume=strcmp(answer{1},'Yes');
    ParamOut.ActionInput.SlidingSequenceLength=nbaver_ima;
    ParamOut.ActionInput.BrightnessRankThreshold=str2double(answer{3});
    
    % apply the image rescaling function 'level' (avoid the blinking effects of bright particles)
    answer=msgbox_uvmat('INPUT_Y-N','apply image rescaling function levels.m after sub_background');
    ParamOut.ActionInput.CheckLevelTransform=strcmp(answer,'Yes');
    return
end
%%%%%%%%%%%%%%%%%    STOP HERE FOR PAMETER INPUT MODE   %%%%%%%%%%%%%%%%% 

%% read input parameters from an xml file if input is a file name (batch mode)
checkrun=1;
RUNHandle=[];
WaitbarHandle=[];
if ischar(Param)
    Param=xml2struct(Param);% read Param as input file (batch case)
    checkrun=0;
else
hseries=findobj(allchild(0),'Tag','series');
RUNHandle=findobj(hseries,'Tag','RUN');%handle of RUN button in GUI series
WaitbarHandle=findobj(hseries,'Tag','Waitbar');%handle of waitbar in GUI series
end

%% input preparation
NbSlice_i=Param.IndexRange.NbSlice;
if ~isequal(NbSlice_i,1)
    display(['multi-level splitting into ' num2str(NbSlice_i) ' slices']);
end
RootPath=Param.InputTable(:,1);
RootFile=Param.InputTable(:,3);
SubDir=Param.InputTable(:,2);
NomType=Param.InputTable(:,4);
FileExt=Param.InputTable(:,5);
%hdisp=disp_uvmat('WAITING...','checking the file series',checkrun);
[filecell,i1_series,i2_series,j1_series]=get_file_series(Param);
% if ~isempty(hdisp),delete(hdisp),end;
%%%%%%%%%%%%
    % The cell array filecell is the list of input file names, while
    % filecell{iview,fileindex}:
    %        iview: line in the table corresponding to a given file series
    %        fileindex: file index within  the file series,
    % i1_series(iview,ref_j,ref_i)... are the corresponding arrays of indices i1,i2,j1,j2, depending on the input line iview and the two reference indices ref_i,ref_j
    % i1_series(iview,fileindex) expresses the same indices as a 1D array in file indices
%%%%%%%%%%%%
[FileInfo{1},MovieObject{1}]=get_file_info(filecell{1,1});
FileType{1}=FileInfo{1}.FileType;
    if ~isempty(j1_series{1})
        frame_index{1}=j1_series{1};
    else
        frame_index{1}=i1_series{1};
    end


%% output file naming
FileExtOut='.png'; % write result as .png images for image inputs
if strcmp(lower(NomType{1}(end)),'a')
    NomTypeOut=NomType{1};%case of letter appendix
elseif isempty(j1_series{1})
    NomTypeOut='_1';
else
    NomTypeOut='_1_1';% caseof purely numerical indexing
end
OutputDir=[Param.OutputSubDir Param.OutputDirExt];

%% file index parameters
% NbSlice_i: nbre of slices for i index: different of of 1 for multi-level,
% the function sub_background is then relaunched by the GUI series for each
%      slice, incrementing the first index i by 1
% NbSlice_j: nbre of slices in volume mode
% nbfield : total number of images treated per slice
% step: shift of image index at each step of the sliding background (corresponding to the nbre of images in a burst)
% nbaver_ima: nbre of the images in the sliding sequence used for the background
% nbaver=nbaver_ima/step: nbre of bursts corresponding to nbaver_ima images. It has been adjusted so that nbaver is an odd integer
nbfield_j=size(i1_series{1},1); %nb of fields for the j index (bursts or volume slices)
nbfield_i=size(i1_series{1},2); %nb of fields for the i index

if Param.ActionInput.CheckVolume
    step=2;% we assume the burst contains only one image pair
    NbSlice_j=nbfield_j;
    NbSlice=nbfield_j;
    nbfield_series=nbfield_i;
else 
    step=nbfield_j;%case of bursts: the sliding background is shifted by the length of one burst
        NbSlice_j=1;
        NbSlice=NbSlice_i;
    %nbfield_i=floor(nbfield_i/NbSlice_i);%total number of  indexes in a slice (adjusted to an integer number of slices)
    %nbfield=nbfield_i*NbSlice_i; %total number of fields after adjustement
    nbfield_series=nbfield_i*nbfield_j;
end
nbfield=nbfield_j*nbfield_i; %total number of fields
nbaver_ima=Param.ActionInput.SlidingSequenceLength;%number of images for the sliding background
nbaver=ceil(nbaver_ima/step);%number of bursts for the sliding background
if isequal(mod(nbaver,2),0)
    nbaver=nbaver+1;%set the number of bursts to an odd number (so the middle burst is defined)
end
nbaver_ima=nbaver*step;
if nbaver_ima > nbfield
    display('number of images in a slice smaller than the proposed number of images for the sliding average')
    return
end
halfnbaver=floor(nbaver/2); % half width (in unit of bursts) of the sliding background 

%% calculate absolute brightness rank
rank=floor(Param.ActionInput.BrightnessRankThreshold*nbaver_ima);
if rank==0
    rank=1;%rank selected in the sorted image series
end

%% prealocate memory for the sliding background
try
    Afirst=read_image(filecell{1,1},FileType{1},MovieObject{1},frame_index{1}(1));
    [npy,npx,nbcolor]=size(Afirst);% the argument nbcolor is important to get npx right for color images
    if strcmp(class(Afirst),'uint8') % case of 8bit images
        Ak=zeros(npy,npx,nbaver_ima,'uint8'); %prealocate memory
        Asort=zeros(npy,npx,nbaver_ima,'uint8'); %prealocate memory
    else
        Ak=zeros(npy,npx,nbaver_ima,'uint16'); %prealocate memory
        Asort=zeros(npy,npx,nbaver_ima,'uint16'); %prealocate memory
    end
catch ME
    msgbox_uvmat('ERROR',['sub_background/read_image/' ME.message])
    return
end


%%%%%%%  LOOP ON SLICES FOR VOLUME SCAN %%%%%%%
for j_slice=1:NbSlice_j
    %% select the series of i indices to process
    indselect=j_slice:step*NbSlice_j:nbfield;% select file indices of the slice
    for ifield=1:step-1
        indselect=[indselect;indselect(end,:)+NbSlice_j];
    end
    
    %% read the first series of nbaver_ima images and sort by luminosity at each pixel
    for ifield = 1:nbaver_ima
        ifile=indselect(ifield);
        filename=filecell{1,ifile};
        Aread=read_image(filename,FileType{1},MovieObject{1},frame_index{1}(ifile));
        if ndims(Aread)==3;%color images
            Aread=sum(double(Aread),3);% take the sum of color components
        end
        Ak(:,:,ifield)=Aread;
    end
    Asort=sort(Ak,3);%sort the luminosity of images at each point
    B=Asort(:,:,rank);%background image
    
    %% substract the first background image to the first images
    display( 'first background image will be substracted')
    for ifield=1:step*(halfnbaver+1);% nbre of images treated by the first background image
        Acor=double(Ak(:,:,ifield))-double(B);%substract background to the current image
        Acor=(Acor>0).*Acor; % put to 0 the negative elements in Acor
        ifile=indselect(ifield);
        j1=1;
        if ~isempty(j1_series{1})
            j1=j1_series{1}(ifile);
        end
        newname=fullfile_uvmat(RootPath{1},OutputDir,RootFile{1},FileExtOut,NomTypeOut,i1_series{1}(ifile),[],j1);
        
        %write result file
        if Param.ActionInput.CheckLevelTransform
            C=levels(Acor);
            imwrite(C,newname,'BitDepth',8); % save the new image
        else
            if isequal(FileInfo{1}.BitDepth,16)
                C=uint16(Acor);
                imwrite(C,newname,'BitDepth',16); % save the new image
            else
                C=uint8(Acor);
                imwrite(C,newname,'BitDepth',8); % save the new image
            end
        end
        display([newname ' written'])
    end
    
    %% repeat the operation on a sliding series of images
    display('sliding background image will be substracted')
    if nbfield_series > nbaver_ima
        for ifield = step*(halfnbaver+1):step:nbfield_series-step*(halfnbaver+1)% ifield +iburst=index of the current processed image
            update_waitbar(WaitbarHandle,ifield/nbfield_series)
            if  ~isempty(RUNHandle)&&~strcmp(get(RUNHandle,'BusyAction'),'queue')
                disp('program stopped by user')
                return
            end
            if nbaver_ima>step
            Ak(:,:,1:nbaver_ima-step)=Ak(:,:,1+step:nbaver_ima);% shift the current image series by one burst (step)
            end
            %incorporate next burst in the current image series
            for iburst=1:step
                ifile=indselect(ifield+iburst+step*halfnbaver);
                j1=1;
                if ~isempty(j1_series{1})
                    j1=j1_series{1}(ifile);
                end
                filename=fullfile_uvmat(RootPath{1},SubDir{1},RootFile{1},FileExt{1},NomType{1},i1_series{1}(ifile),[],j1);
                Aread=read_image(filename,FileType{1},MovieObject{1},i1_series{1}(ifile));
                if ndims(Aread)==3;%color images
                    Aread=sum(double(Aread),3);% take the sum of color components
                end
                Ak(:,:,nbaver_ima-step+iburst)=Aread;% fill the last burst of the current image series by the new image
            end
            Asort=sort(Ak,3);%sort the new current image series by luminosity
            B=Asort(:,:,rank);%current background image
            %substract the background for the current burst
            for iburst=1:step
                Acor=double(Ak(:,:,step*halfnbaver+iburst))-double(B); %the current image has been already read ans stored as index step*halfnbaver+iburst in the current series
                Acor=(Acor>0).*Acor; % put to 0 the negative elements in Acor
                ifile=indselect(ifield+iburst);
                if ~isempty(j1_series{1})
                    j1=j1_series{1}(ifile);
                end
                newname=fullfile_uvmat(RootPath{1},OutputDir,RootFile{1},FileExtOut,NomTypeOut,i1_series{1}(ifile),[],j1);
                %write result file
                if Param.ActionInput.CheckLevelTransform
                    C=levels(Acor);
                    imwrite(C,newname,'BitDepth',8); % save the new image
                else
                    if isequal(FileInfo{1}.BitDepth,16)
                        C=uint16(Acor);
                        imwrite(C,newname,'BitDepth',16); % save the new image
                    else
                        C=uint8(Acor);
                        imwrite(C,newname,'BitDepth',8); % save the new image
                    end
                end
                display([newname ' written'])
            end
        end
    end
    
    %% substract the background from the last images
    display('last background image will be substracted')
    for  ifield=nbfield_series-step*halfnbaver+1:nbfield_series
        Acor=double(Ak(:,:,ifield-nbfield_series+step*(2*halfnbaver+1)))-double(B);
        Acor=(Acor>0).*Acor; % put to 0 the negative elements in Acor
        ifile=indselect(ifield);
        if ~isempty(j1_series{1})
            j1=j1_series{1}(ifile);
        end
        newname=fullfile_uvmat(RootPath{1},OutputDir,RootFile{1},FileExtOut,NomTypeOut,i1_series{1}(ifile),[],j1);
        %write result file
        if Param.ActionInput.CheckLevelTransform
            C=levels(Acor);
            imwrite(C,newname,'BitDepth',8); % save the new image
        else
            if isequal(FileInfo{1}.BitDepth,16)
                C=uint16(Acor);
                imwrite(C,newname,'BitDepth',16); % save the new image
            else
                C=uint8(Acor);
                imwrite(C,newname,'BitDepth',8); % save the new image
            end
        end
        display([newname ' written'])
    end
end


function C=levels(A)
%whos A;
B=double(A(:,:,1));
windowsize=round(min(size(B,1),size(B,2))/20);
windowsize=floor(windowsize/2)*2+1;
ix=1/2-windowsize/2:-1/2+windowsize/2;%
%del=np/3;
%fct=exp(-(ix/del).^2);
fct2=cos(ix/(windowsize-1)/2*pi/2);
%Mfiltre=(ones(5,5)/5^2);
%Mfiltre=fct2';
Mfiltre=fct2'*fct2;
Mfiltre=Mfiltre/(sum(sum(Mfiltre)));

C=filter2(Mfiltre,B);
C(:,1:windowsize)=C(:,windowsize)*ones(1,windowsize);
C(:,end-windowsize+1:end)=C(:,end-windowsize+1)*ones(1,windowsize);
C(1:windowsize,:)=ones(windowsize,1)*C(windowsize,:);
C(end-windowsize+1:end,:)=ones(windowsize,1)*C(end-windowsize,:);
C=tanh(B./(2*C));
[n,c]=hist(reshape(C,1,[]),100);
% figure;plot(c,n);

[m,i]=max(n);
c_max=c(i);
[dummy,index]=sort(abs(c-c(i)));
n=n(index);
c=c(index);
i_select = find(cumsum(n)<0.95*sum(n));
if isempty(i_select)
    i_select = 1:length(c);
end
c_select=c(i_select);
n_select=n(i_select);
cmin=min(c_select);
cmax=max(c_select);
C=(C-cmin)/(cmax-cmin)*256;
C=uint8(C);