source: trunk/src/series/time_series.m @ 767

%'time_series': extract a time series after projection on an object (points , line..)
% this function can be used as a template for applying a global operation on a series of input fields
%------------------------------------------------------------------------
% function GUI_input=time_series(Param)
%
%%%%%%%%%%% GENERAL TO ALL SERIES ACTION FCTS %%%%%%%%%%%%%%%%%%%%%%%%%%%
%
%OUTPUT
% ParamOut: sets options in the GUI series.fig needed for the function
%
%INPUT:
% In run mode, the input parameters are given as a Matlab structure Param copied from the GUI series.
% In batch mode, Param is the name of the corresponding xml file containing the same information
% when Param.Action.RUN=0 (as activated when the current Action is selected
% in series), the function ouput paramOut set the activation of the needed GUI elements
%
% Param contains the elements:(use the menu bar command 'export/GUI config' in series to 
% see the current structure Param)
%    .InputTable: cell of input file names, (several lines for multiple input)
%                      each line decomposed as {RootPath,SubDir,Rootfile,NomType,Extension}
%    .OutputSubDir: name of the subdirectory for data outputs
%    .OutputDirExt: directory extension for data outputs
%    .Action: .ActionName: name of the current activated function
%             .ActionPath:   path of the current activated function
%             .ActionExt: fct extension ('.m', Matlab fct, '.sh', compiled   Matlab fct
%             .RUN =0 for GUI input, =1 for function activation
%             .RunMode='local','background', 'cluster': type of function  use
%             
%    .IndexRange: set the file or frame indices on which the action must be performed
%    .FieldTransform: .TransformName: name of the selected transform function
%                     .TransformPath:   path  of the selected transform function
%    .InputFields: sub structure describing the input fields withfields
%              .FieldName: name(s) of the field
%              .VelType: velocity type
%              .FieldName_1: name of the second field in case of two input series
%              .VelType_1: velocity type of the second field in case of two input series
%              .Coord_y: name of y coordinate variable
%              .Coord_x: name of x coordinate variable
%    .ProjObject: %sub structure describing a projection object (read from ancillary GUI set_object)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

function ParamOut=time_series(Param) 

%% set the input elements needed on the GUI series when the action is selected in the menu ActionName or InputTable refreshed
if isstruct(Param) && isequal(Param.Action.RUN,0)% function activated from the GUI series but not RUN 
    ParamOut.AllowInputSort='off';% allow alphabetic sorting of the list of input file SubDir (options 'off'/'on', 'off' by default)
    ParamOut.WholeIndexRange='off';% prescribes the file index ranges from min to max (options 'off'/'on', 'off' by default)
    ParamOut.NbSlice='on'; %nbre of slices ('off' by default)
    ParamOut.VelType='two';% menu for selecting the velocity type (options 'off'/'one'/'two',  'off' by default)
    ParamOut.FieldName='two';% menu for selecting the field (s) in the input file(options 'off'/'one'/'two', 'off' by default)
    ParamOut.FieldTransform = 'on';%can use a transform function
    ParamOut.TransformPath=fullfile(fileparts(which('uvmat')),'transform_field');% path to transform functions (needed for compilation only)
    ParamOut.ProjObject='on';%can use projection object(option 'off'/'on',
    ParamOut.Mask='off';%can use mask option   (option 'off'/'on', 'off' by default)
    ParamOut.OutputDirExt='.tseries';%set the output dir extension
    ParamOut.OutputFileMode='NbSlice';% '=NbInput': 1 output file per input file index, '=NbInput_i': 1 file per input file index i, '=NbSlice': 1 file per slice
    % check the existence of the first file in the series
        first_j=[];
    if isfield(Param.IndexRange,'first_j'); first_j=Param.IndexRange.first_j; end
    last_j=[];
    if isfield(Param.IndexRange,'last_j'); last_j=Param.IndexRange.last_j; end
    PairString='';
    if isfield(Param.IndexRange,'PairString'); PairString=Param.IndexRange.PairString; end
    [i1,i2,j1,j2] = get_file_index(Param.IndexRange.first_i,first_j,PairString);
    FirstFileName=fullfile_uvmat(Param.InputTable{1,1},Param.InputTable{1,2},Param.InputTable{1,3},...
        Param.InputTable{1,5},Param.InputTable{1,4},i1,i2,j1,j2);
    if ~exist(FirstFileName,'file')
        msgbox_uvmat('WARNING',['the first input file ' FirstFileName ' does not exist'])
    elseif isequal(size(Param.InputTable,1),1) && ~isfield(Param,'ProjObject')
        msgbox_uvmat('WARNING','a projection object may be needed to select points for the time_series')
    end
    return
end

%%%%%%%%%%%% STANDARD PART  %%%%%%%%%%%%
ParamOut=[]; %default output
%% read input parameters from an xml file if input is a file name (batch mode)
checkrun=1;
if ischar(Param)
    Param=xml2struct(Param);% read Param as input file (batch case)
    checkrun=0;
end
hseries=findobj(allchild(0),'Tag','series');
RUNHandle=findobj(hseries,'Tag','RUN');%handle of RUN button in GUI series
WaitbarHandle=findobj(hseries,'Tag','Waitbar');%handle of waitbar in GUI series

%% define the directory for result file (with path=RootPath{1})
OutputDir=[Param.OutputSubDir Param.OutputDirExt];

%% root input file(s) name, type and index series
RootPath=Param.InputTable(:,1);
RootFile=Param.InputTable(:,3);
SubDir=Param.InputTable(:,2);
NomType=Param.InputTable(:,4);
FileExt=Param.InputTable(:,5);
hdisp=disp_uvmat('WAITING...','checking the file series',checkrun);
[filecell,i1_series,i2_series,j1_series,j2_series]=get_file_series(Param);
if ~isempty(hdisp),delete(hdisp),end;
%%%%%%%%%%%%
% The cell array filecell is the list of input file names, while
% filecell{iview,fileindex}:
%        iview: line in the table corresponding to a given file series
%        fileindex: file index within  the file series,
% i1_series(iview,ref_j,ref_i)... are the corresponding arrays of indices i1,i2,j1,j2, depending on the input line iview and the two reference indices ref_i,ref_j
% i1_series(iview,fileindex) expresses the same indices as a 1D array in file indices
%%%%%%%%%%%%
nbview=numel(i1_series);%number of input file series (lines in InputTable)
nbfield_j=size(i1_series{1},1); %nb of fields for the j index (bursts or volume slices)
nbfield_i=size(i1_series{1},2); %nb of fields for the i index
nbfield=nbfield_j*nbfield_i; %total number of fields

%% determine the file type on each line from the first input file
ImageTypeOptions={'image','multimage','mmreader','video'};
NcTypeOptions={'netcdf','civx','civdata'};
for iview=1:nbview
    if ~exist(filecell{iview,1}','file')
        disp_uvmat('ERROR',['the first input file ' filecell{iview,1} ' does not exist'],checkrun)
        return
    end
    [FileType{iview},FileInfo{iview},MovieObject{iview}]=get_file_type(filecell{iview,1});
    CheckImage{iview}=~isempty(find(strcmp(FileType{iview},ImageTypeOptions)));% =1 for images
    CheckNc{iview}=~isempty(find(strcmp(FileType{iview},NcTypeOptions)));% =1 for netcdf files
    if ~isempty(j1_series{iview})
        frame_index{iview}=j1_series{iview};
    else
        frame_index{iview}=i1_series{iview};
    end
end

%% calibration data and timing: read the ImaDoc files
[XmlData,NbSlice_calib,time,errormsg]=read_multimadoc(RootPath,SubDir,RootFile,FileExt,i1_series,i2_series,j1_series,j2_series);
if size(time,1)>1
    diff_time=max(max(diff(time)));
    if diff_time>0
        disp_uvmat('WARNING',['times of series differ by (max) ' num2str(diff_time)],checkrun)
    end
    time=time(1,:);% choose the time data from the first sequence
end

%% coordinate transform or other user defined transform
transform_fct=[];%default
if isfield(Param,'FieldTransform')&&~isempty(Param.FieldTransform.TransformName)
    addpath(Param.FieldTransform.TransformPath)
    transform_fct=str2func(Param.FieldTransform.TransformName);
    rmpath(Param.FieldTransform.TransformPath)
end

%%%%%%%%%%%% END STANDARD PART  %%%%%%%%%%%%
% EDIT FROM HERE

%% check the validity of  the input file types
if ~CheckImage{1}&&~CheckNc{1}
    disp_uvmat('ERROR',['invalid file type input ' FileType{1}],checkrun)
    return
end
if nbview==2 && ~isequal(CheckImage{1},CheckImage{2})
    disp_uvmat('ERROR','input must be two image series or two netcdf file series',checkrun)
    return
end

%% settings for the output file
FileExtOut='.nc';% write result as .nc files for netcdf inputs
NomTypeOut=nomtype2pair(NomType{1});% determine the index nomenclature type for the output file
first_i=i1_series{1}(1);
last_i=i1_series{1}(end);
if isempty(j1_series{1})% if there is no second index j
    first_j=1;last_j=1;
else
    first_j=j1_series{1}(1);
    last_j=j1_series{1}(end);
end

%% Set field names and velocity types
InputFields{1}=[];%default (case of images)
if isfield(Param,'InputFields')
    InputFields{1}=Param.InputFields;
end
if nbview==2
    InputFields{2}=[];%default (case of images)
    if isfield(Param,'InputFields')
        InputFields{2}=Param.InputFields{1};%default
        if isfield(Param.InputFields,'FieldName_1')
            InputFields{2}.FieldName=Param.InputFields.FieldName_1;
            if isfield(Param.InputFields,'VelType_1')
                InputFields{2}.VelType=Param.InputFields.VelType_1;
            end
        end
    end
end

%% Initiate output fields
%initiate the output structure as a copy of the first input one (reproduce fields)
[DataOut,tild,errormsg] = read_field(filecell{1,1},FileType{1},InputFields{1},1);
if ~isempty(errormsg)
    disp_uvmat('ERROR',['error reading ' filecell{1,1} ': ' errormsg],checkrun)
    return
end
time_1=[];
if isfield(DataOut,'Time')
    time_1=DataOut.Time(1);
end
if CheckNc{iview}
    if isempty(strcmp('Conventions',DataOut.ListGlobalAttribute))
        DataOut.ListGlobalAttribute=['Conventions' DataOut.ListGlobalAttribute];
    end
    DataOut.Conventions='uvmat';
    DataOut.ListGlobalAttribute=[DataOut.ListGlobalAttribute {Param.Action}];
    ActionKey='Action';
    while isfield(DataOut,ActionKey)
        ActionKey=[ActionKey '_1'];
    end
    DataOut.(ActionKey)=Param.Action;
    DataOut.ListGlobalAttribute=[DataOut.ListGlobalAttribute {ActionKey}];
    if isfield(DataOut,'Time')
        DataOut.ListGlobalAttribute=[DataOut.ListGlobalAttribute {'Time','Time_end'}];
    end
end

nbmissing=0; %number of undetected files
% for i_slice=1:NbSlice
%index_slice=i_slice:NbSlice:nbfield;% select file indices of the slice
nbfile=0;
nbmissing=0;

%%%%%%%%%%%%%%%% loop on field indices %%%%%%%%%%%%%%%%
for index=1:nbfield
            update_waitbar(WaitbarHandle,index/nbfield)
    if ~isempty(RUNHandle) && ~strcmp(get(RUNHandle,'BusyAction'),'queue')
        disp('program stopped by user')
        break % leave the loop if stop is ordered
    end
    Data=cell(1,nbview);%initiate the set Data;
    nbtime=0;
    dt=[];
    %%%%%%%%%%%%%%%% loop on views (input lines) %%%%%%%%%%%%%%%%
    for iview=1:nbview
        % reading input file(s)
        [Data{iview},tild,errormsg] = read_field(filecell{iview,index},FileType{iview},InputFields{iview},frame_index{iview}(index));
        if ~isempty(errormsg)
            errormsg=['time_series / read_field / ' errormsg];
            display(errormsg)
            break
        end
        if ~isempty(NbSlice_calib)
            Data{iview}.ZIndex=mod(i1_series{iview}(index)-1,NbSlice_calib{iview})+1;%Zindex for phys transform
        end
    end
    if isempty(errormsg)
        Field=Data{1}; % default input field structure
        % coordinate transform (or other user defined transform)
        if ~isempty(transform_fct)
            switch nargin(transform_fct)
                case 4
                    if length(Data)==2
                        Field=transform_fct(Data{1},XmlData{1},Data{2},XmlData{2});
                    else
                        Field=transform_fct(Data{1},XmlData{1});
                    end
                case 3
                    if length(Data)==2
                        Field=transform_fct(Data{1},XmlData{1},Data{2});
                    else
                        Field=transform_fct(Data{1},XmlData{1});
                    end
                case 2
                    Field=transform_fct(Data{1},XmlData{1});
                case 1
                    Field=transform_fct(Data{1});
            end
        end
        
        %field projection on an object 
        if Param.CheckObject
            % calculate tps coefficients if needed
            if isfield(Param.ProjObject,'ProjMode')&& strcmp(Param.ProjObject.ProjMode,'interp_tps')
                Field=tps_coeff_field(Field,check_proj_tps);
            end
            [Field,errormsg]=proj_field(Field,Param.ProjObject);
            if ~isempty(errormsg)
                msgbox_uvmat('ERROR',['time_series / proj_field / ' errormsg])
                return
            end
        end
        nbfile=nbfile+1;
        
        % initiate the time series at the first iteration
        if nbfile==1
            % stop program if the first field reading is in error
            if ~isempty(errormsg)
                disp_uvmat('ERROR',['time_series / sub_field / ' errormsg],checkrun)
                return
            end
            DataOut=Field;%default
%             DataOut.NbDim=Field.NbDim+1; %add the time dimension for plots
            nbvar=length(Field.ListVarName);
            if nbvar==0
                disp_uvmat('ERROR','no input variable selected',checkrun)
                return
            end
            testsum=2*ones(1,nbvar);%initiate flag for action on each variable
            if isfield(Field,'VarAttribute') % look for coordinate and flag variables
                for ivar=1:nbvar
                    if length(Field.VarAttribute)>=ivar && isfield(Field.VarAttribute{ivar},'Role')
                        var_role=Field.VarAttribute{ivar}.Role;%'role' of the variable
                        if isequal(var_role,'errorflag')
                            disp_uvmat('ERROR','do not handle error flags in time series',checkrun)
                            return
                        end
                        if isequal(var_role,'warnflag')
                            testsum(ivar)=0;  % not recorded variable
                            eval(['DataOut=rmfield(DataOut,''' Field.ListVarName{ivar} ''');']);%remove variable
                        end
                        if strcmp(var_role,'coord_x')||strcmp(var_role,'coord_y')||strcmp(var_role,'coord_z')||strcmp(var_role,'coord')
                            testsum(ivar)=1; %constant coordinates, record without time evolution
                        end
                    end
                    % check whether the variable ivar is a dimension variable
                    DimCell=Field.VarDimName{ivar};
                    if ischar(DimCell)
                        DimCell={DimCell};
                    end
                    if numel(DimCell)==1 && isequal(Field.ListVarName{ivar},DimCell{1})%detect dimension variables
                        testsum(ivar)=1;
                    end
                end
            end
            for ivar=1:nbvar
                if testsum(ivar)==2
                    eval(['DataOut.' Field.ListVarName{ivar} '=[];'])
                end
            end
            DataOut.ListVarName=[{'Time'} DataOut.ListVarName];
        end
        
        % add data to the current field
        for ivar=1:length(Field.ListVarName)
            VarName=Field.ListVarName{ivar};
            VarVal=Field.(VarName);
            if testsum(ivar)==2% test for recorded variable
                if isempty(errormsg)
                    if Param.CheckObject && strcmp(Param.ProjObject.ProjMode,'inside')% take the average in the domain for 'inside' projection mode
                        if isempty(VarVal)
                            disp_uvmat('ERROR',['empty result at frame index ' num2str(i1_series{iview}(index))],checkrun)
                            return
                        end
                        VarVal=mean(VarVal,1);
                    end
                    VarVal=shiftdim(VarVal,-1); %shift dimension
                    DataOut.(VarName)=cat(1,DataOut.(VarName),VarVal);%concanete the current field to the time series
                else
                    DataOut.(VarName)=cat(1,DataOut.(VarName),0);% put each variable to 0 in case of input reading error
                end
            elseif testsum(ivar)==1% variable representing fixed coordinates
                VarInit=DataOut.(VarName);
                if isempty(errormsg) && ~isequal(VarVal,VarInit)
                    disp_uvmat('ERROR',['time series requires constant coordinates ' VarName ': use projection mode interp'],checkrun)
                    return
                end
            end
        end
        
        % record the time:
        if isempty(time)% time not set by xml filer(s)
            if isfield(Data{1},'Time')
                DataOut.Time(nbfile,1)=Field.Time;
            else
                DataOut.Time(nbfile,1)=index;%default
            end
        else % time from ImaDoc prevails  TODO: correct
            DataOut.Time(nbfile,1)=time(index);%
        end
        
        % record the number of missing input fields
        if ~isempty(errormsg)
            nbmissing=nbmissing+1;
            display(['index=' num2str(index) ':' errormsg])
        end
    end
    
end
%%%%%%% END OF LOOP WITHIN A SLICE

%remove time for global attributes if exists
Time_index=find(strcmp('Time',DataOut.ListGlobalAttribute));
if ~isempty(Time_index)
    DataOut.ListGlobalAttribute(Time_index)=[];
end
DataOut.Conventions='uvmat';
for ivar=1:numel(DataOut.ListVarName)
    VarName=DataOut.ListVarName{ivar};
    eval(['DataOut.' VarName '=squeeze(DataOut.' VarName ');']) %remove singletons
end

% add time dimension
for ivar=1:length(Field.ListVarName)
    DimCell=Field.VarDimName{ivar};
    if ischar(DimCell),DimCell={DimCell};end
    if testsum(ivar)==2% variable for which time series is calculated
        DataOut.VarDimName{ivar}=[{'Time'} DimCell];
    elseif testsum(ivar)==1 % variable represneting a fixed coordinate
        DataOut.VarDimName{ivar}=DimCell;
    end
end
indexremove=find(~testsum);
if ~isempty(indexremove)
    DataOut.ListVarName(1+indexremove)=[];
    DataOut.VarDimName(indexremove)=[];
    if isfield(DataOut,'Role') && ~isempty(DataOut.Role{1})%generaliser aus autres attributs
        DataOut.Role(1+indexremove)=[];
    end
end

%shift variable attributes
if isfield(DataOut,'VarAttribute')
    DataOut.VarAttribute=[{[]} DataOut.VarAttribute];
end
DataOut.VarDimName=[{'Time'} DataOut.VarDimName];
DataOut.Action=Param.Action;%name of the processing programme
test_time=diff(DataOut.Time)>0;% test that the readed time is increasing (not constant)
if ~test_time
    DataOut.Time=1:nbfield;
end

% display nbmissing
if ~isequal(nbmissing,0)
    disp_uvmat('WARNING',[num2str(nbmissing) ' files skipped: missing files or bad input, see command window display'],checkrun)
end

%% name of result file
OutputFile=fullfile_uvmat(RootPath{1},OutputDir,RootFile{1},FileExtOut,NomTypeOut,first_i,last_i,first_j,last_j);
errormsg=struct2nc(OutputFile,DataOut); %save result file
if isempty(errormsg)
    display([OutputFile ' written'])
else
    disp_uvmat('ERROR',['error in Series/struct2nc: ' errormsg],checkrun)
end

%% plot the time series (the last one in case of multislices)
if checkrun
    figure
    haxes=axes;
    plot_field(DataOut,haxes)
    
    %% display the result file using the GUI get_field
    hget_field=findobj(allchild(0),'name','get_field');
    if ~isempty(hget_field)
        delete(hget_field)
    end
    get_field(OutputFile,DataOut)
end