source: trunk/src/set_object.m @ 1022

Last change on this file since 1022 was 1001, checked in by sommeria, 7 years ago

tubcorrelation added, compilation improved to accept tranform fct

File size: 36.3 KB
RevLine 
[204]1%'set_object': GUI to edit a projection object
2%------------------------------------------------------------------------
3% function hset_object= set_object(data, PlotHandles,ZBounds)
4% associated with the GUI set_object.fig
5%
6% OUTPUT:
7% hset_object: handle of the GUI figure
8%
[445]9% INPUT:u
[204]10% data: structure describing the object properties
11%    .Style=...
12%    .ProjMode
13%    .CoordType: 'phys' or 'px'
[379]14%    .num_DX,.num_DY,.num_DZ : mesh along each dirction
[204]15%    .RangeX, RangeY
16%    .Coord(j,i), i=1, 2, 3,  components x, y, z of j=1...n position(s) characterizing the object components
17% PlotHandles: handles for projection plots NO MORE USED
18% Zbounds: bounds on Z ( 3D case)
[809]19
20%=======================================================================
[977]21% Copyright 2008-2017, LEGI UMR 5519 / CNRS UGA G-INP, Grenoble, France
[809]22%   http://www.legi.grenoble-inp.fr
23%   Joel.Sommeria - Joel.Sommeria (A) legi.cnrs.fr
[204]24%
25%     This file is part of the toolbox UVMAT.
[809]26%
[204]27%     UVMAT is free software; you can redistribute it and/or modify
[809]28%     it under the terms of the GNU General Public License as published
29%     by the Free Software Foundation; either version 2 of the license,
30%     or (at your option) any later version.
31%
[204]32%     UVMAT is distributed in the hope that it will be useful,
33%     but WITHOUT ANY WARRANTY; without even the implied warranty of
34%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
[809]35%     GNU General Public License (see LICENSE.txt) for more details.
36%=======================================================================
[204]37
38function varargout = set_object(varargin)
39
[970]40% Last Modified by GUIDE v2.5 09-Nov-2016 15:46:04
[204]41
[680]42% Begin initialization code - DO NOT REFRESH
[204]43gui_Singleton = 1;
44gui_State = struct('gui_Name',       mfilename, ...
45                   'gui_Singleton',  gui_Singleton, ...
46                   'gui_OpeningFcn', @set_object_OpeningFcn, ...
47                   'gui_OutputFcn',  @set_object_OutputFcn, ...
48                   'gui_LayoutFcn',  [] , ...
49                   'gui_Callback',   []);
50if nargin & ischar(varargin{1})
51    gui_State.gui_Callback = str2func(varargin{1});
52end
53
54if nargout
55    [varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
56else
57    gui_mainfcn(gui_State, varargin{:});
58end
[680]59% End initialization code - DO NOT REFRESH
[204]60%------------------------------------------------------------------------
61%------------------------------------------------------------------------
62% --- Executes just before set_object is made visible.
63%INPUT:
64% handles: handles of the set_object interface elements
65%'IndexObj': NON USED ANYMORE (To suppress) index of the object (on the UvData list) that set_object will modify
66%        if =[] or absent: index still undefined (create mode in uvmat)
[680]67%        if=0; no associated object (used for series), the button 'REFRESH' is  then unvisible
[204]68%'data': read from an existing object selected in the interface
[379]69%      .Name : class of object ('POINTS','LINE',....)
70%      .num_DX,num_DY,num_DZ; meshes for regular grids
[204]71%      .Coord: object position coordinates
72%      .ParentButton: handle of the uicontrol object calling the interface
73% PlotHandles: set of handles of the elements contolling the plotting of the projected field:
[680]74%  if =[] or absent, no refresh (mask mode in uvmat)
[204]75% parameters on the uvmat interface (obtained by 'get_plot_handle.m')
76function set_object_OpeningFcn(hObject, eventdata, handles, data, PlotHandles,ZBounds)
77%-------------------------------------------------------------------
78% Choose default command line output for set_object
79handles.output = hObject;
80% Update handles structure
81guidata(hObject, handles);
82
[613]83%% position
[657]84set(0,'Unit','pixels')
[613]85ScreenSize=get(0,'ScreenSize');% get the size of the screen, to put the fig on the upper right
[705]86PosGUI=get(handles.set_object,'Position');% fig width in pixels
87Width=PosGUI(3);%width of the gui set_object in pixels
88Height=PosGUI(4);
[613]89Left=ScreenSize(3)- Width-40; %right edge close to the right, with margin=40
90Bottom=ScreenSize(4)-Height-40; %put fig at top right
[657]91set(handles.set_object,'Unit','pixels')
[613]92set(handles.set_object,'Position',[Left Bottom Width Height])
93
[204]94%default
[206]95if ~exist('ZBounds','var')
96    ZBounds=0; %default
[204]97end
[309]98set(hObject,'WindowButtonDownFcn',{'mouse_down'})%set mouse click action function
[402]99set(hObject,'DeleteFcn',{@closefcn})
[204]100
101% fill the interface as set in the input data:
102if exist('data','var')
[967]103    if isfield(data,'Coord')
104        set(handles.Coord,'Data',data.Coord)
105        if size(data.Coord,2)==3
[379]106        set(handles.z_slider,'Visible','on')
[967]107        end
[379]108    else
[204]109        set(handles.z_slider,'Visible','off')
110    end
[387]111    if isfield(data,'TypeMenu')
112        set(handles.Type,'String',data.TypeMenu)
113    end
114    if isfield(data,'ProjModeMenu')
115        set(handles.ProjMode,'UserData',data.ProjModeMenu)% data.ProjModeMenu as default menu (used in Type_Callback)
[954]116    end     
[591]117    errormsg=fill_GUI(data,handles.set_object);
[410]118    if ~isempty(errormsg)
119        msgbox_uvmat('ERROR','bad data input in set_object')
120        return
121    end
[387]122    Type_Callback(hObject, eventdata, handles)% update the GUI set_object depending on the object type   
[681]123    set(handles.REFRESH,'BackgroundColor',[1 0 0])
[955]124    if isfield(data,'RangeZ')
[379]125        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
[955]126        if length(ZBounds) >= 2
127            DZ=max(data.RangeZ);%slider step
128            if ~isnan(ZBounds(1)) && ZBounds(2)~=ZBounds(1)
129                rel_step(1)=min(DZ/(ZBounds(2)-ZBounds(1)),0.2);%must be smaller than 1
130                rel_step(2)=0.1;
131                set(handles.z_slider,'Visible','on')
132                set(handles.z_slider,'Min',ZBounds(1))
133                set(handles.z_slider,'Max',ZBounds(2))
134                set(handles.z_slider,'SliderStep',rel_step)
135                set(handles.z_slider,'Value',(ZBounds(1)+ZBounds(2))/2)
136            end
[204]137        end
138    end
[954]139    if isfield(data,'RangeX')&& ~strcmp(data.Type,'plane_z')%TODO: generalise
[204]140        if ischar(data.RangeX)
141            data.RangeX=str2num(data.RangeX);
142        end
[379]143        set(handles.num_RangeX_2,'String',num2str(max(data.RangeX),3))
144        set(handles.num_RangeX_1,'String',num2str(min(data.RangeX),3))
[204]145    end
[954]146    if isfield(data,'RangeY')&& ~strcmp(data.Type,'plane_z')%TODO: generalise
[204]147        if ischar(data.RangeY)
148            data.RangeY=str2num(data.RangeY);
149        end
[379]150        set(handles.num_RangeY_2,'String',num2str(max(data.RangeY),3))
151        set(handles.num_RangeY_1,'String',num2str(min(data.RangeY),3))
[204]152    end
[954]153    if isfield(data,'RangeZ')&& ~strcmp(data.Type,'plane_z')%TODO: generalise
[204]154        if ischar(data.RangeZ)
155            data.RangeZ=str2num(data.RangeZ);
156        end
[379]157        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
[204]158        if numel(data.RangeZ)>=2
[379]159            set(handles.num_RangeZ_1,'String',num2str(min(data.RangeZ),3))
[204]160        end
161    end 
[625]162    if ~isfield(data,'Angle')
[965]163        data.Angle=[0 0];
[625]164    end
165%     if isfield(data,'Angle') && isequal(numel(data.Angle),3)
[379]166         set(handles.num_Angle_1,'String',num2str(data.Angle(1)))
167         set(handles.num_Angle_2,'String',num2str(data.Angle(2)))
[961]168%         set(handles.num_Angle_3,'String',num2str(data.Angle(3)))
[625]169%     end
[204]170end
[625]171set(get(handles.set_object,'children'),'enable','off')
172set(handles.SAVE,'enable','on')
[680]173% set(handles.REFRESH,'enable','off')
[204]174
[625]175
[204]176%------------------------------------------------------------------------
177% --- Outputs from this function are returned to the command line.
178function varargout = set_object_OutputFcn(hObject, eventdata, handles)
179%------------------------------------------------------------------------
180% Get default command line output from handles structure
181varargout{1} = handles.output;
182varargout{2}=handles;
183
184%------------------------------------------------------------------------
[402]185% executed when closing the GUI set_object
186function closefcn(gcbo,eventdata)
187%------------------------------------------------------------------------
188huvmat=findobj(allchild(0),'Tag','uvmat');%find the current uvmat interface handle
189if ~isempty(huvmat)
190    hhuvmat=guidata(huvmat);
[650]191    set(hhuvmat.CheckViewObject,'value',0)%
192    set(hhuvmat.CheckEditObject,'Value',0)% desactivate the edit option
[402]193    % deselect the object in ListObject when view_field is closed
194    if isempty(findobj(allchild(0),'Tag','view_field'))
195        ObjIndex=get(hhuvmat.ListObject,'Value');
196        ObjIndex=ObjIndex(1);%keep only the first object selected
197        set(hhuvmat.ListObject,'Value',ObjIndex)
198        % draw all object colors in blue (unselected) in uvmat
[511]199        hother=[findobj(hhuvmat.PlotAxes,'Tag','proj_object');findobj(hhuvmat.PlotAxes,'Tag','DeformPoint')];%find all the proj object and deform point representations
[402]200        for iobj=1:length(hother)
201            if isequal(get(hother(iobj),'Type'),'rectangle')||isequal(get(hother(iobj),'Type'),'patch')
202                set(hother(iobj),'EdgeColor','b')
203                if isequal(get(hother(iobj),'FaceColor'),'m')
204                    set(hother(iobj),'FaceColor','b')
205                end
206            elseif isequal(get(hother(iobj),'Type'),'image')
207                Acolor=get(hother(iobj),'CData');
208                Acolor(:,:,1)=zeros(size(Acolor,1),size(Acolor,2));
209                set(hother(iobj),'CData',Acolor);
210            else
211                set(hother(iobj),'Color','b')
212            end
213            set(hother(iobj),'Selected','off')
214        end
215    end
216end
217hseries=findobj(allchild(0),'Name','series');%find the current series interface handle
218if ~isempty(hseries)
219    hhseries=guidata(hseries);
[667]220    set(hhseries.EditObject,'Value',0)
[402]221end
222
223
224%------------------------------------------------------------------------
[379]225% --- Executes on selection change in Type.
226function Type_Callback(hObject, eventdata, handles)
[204]227%------------------------------------------------------------------------
[681]228
[379]229ListType=get(handles.Type,'String');
230Type=ListType{get(handles.Type,'Value')};
[204]231% make correspondance between different object styles
[379]232Coord=get(handles.Coord,'Data');
233
234%% set the number of lines in the Coord table depending on object type
235switch Type
[987]236    case {'line'}
[379]237        if size(Coord,1)<2
238            if isequal(size(Coord,2),3)
239                Coord=[Coord; 0 0 0];%add a line for edition (3D case)
240            else
241                Coord=[Coord; 0 0]; %add a line for edition (2D case)
242            end
243        else
244            Coord=Coord(1:2,:);
245        end
[987]246    case {'rectangle','ellipse','plane','volume'}
[379]247        Coord=Coord(1,:);
[204]248end
[379]249set(handles.Coord,'Data',Coord)
[204]250
[379]251%% set the projection menu and the corresponding options
[387]252if isempty(get(handles.ProjMode,'UserData'))
253    switch Type
[648]254        case 'polyline'
255            menu_proj={'interp_lin';'interp_tps';'none'};
[387]256        case {'polygon','rectangle','ellipse'}
[648]257            menu_proj={'inside';'outside';'mask_inside';'mask_outside';'interp_lin';'interp_tps';'none'};
[387]258        case 'volume'
[581]259            menu_proj={'interp_lin';'none'};
[387]260        otherwise
[581]261            menu_proj={'projection';'interp_lin';'interp_tps';'none'};%default
[387]262    end
263else
264    menu_proj=get(handles.ProjMode,'UserData');
265end
[410]266ProjModeList=get(handles.ProjMode,'String');
267menu_index=find(strcmp(ProjModeList{get(handles.ProjMode,'Value')},menu_proj));
268if isempty(menu_index)
269    menu_index=1;%
[204]270end
[410]271set(handles.ProjMode,'Value',menu_index);% value index must not exceed the menu length
[204]272set(handles.ProjMode,'String',menu_proj)
273ProjMode_Callback(hObject, eventdata, handles)
[379]274
[204]275%------------------------------------------------------------------------
276% --- Executes on selection change in ProjMode.
[675]277%------------------------------------------------------------------------
[681]278function ProjMode_Callback(hObject, eventdata, handles)
[675]279
[681]280set(handles.REFRESH,'BackgroundColor',[1 0 1])
[204]281menu=get(handles.ProjMode,'String');
282value=get(handles.ProjMode,'Value');
283ProjMode=menu{value};
[379]284menu=get(handles.Type,'String');
285value=get(handles.Type,'Value');
[204]286ObjectStyle=menu{value};
[379]287%%%%%%%%% TODO
[955]288test3D=strcmp(ObjectStyle,'plane_z'); %TODO: generalize
[379]289%%%%%%%%%
[204]290%default setting
[379]291set(handles.num_Angle_1,'Visible','off')
292set(handles.num_Angle_2,'Visible','off')
[961]293%set(handles.num_Angle_3,'Visible','off')
[379]294set(handles.num_RangeX_1,'Visible','off')
295set(handles.num_RangeX_2,'Visible','off')
296set(handles.num_RangeY_1,'Visible','off')
[589]297if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
[379]298    set(handles.num_RangeY_2,'Visible','off')
[204]299else
[379]300    set(handles.num_RangeY_2,'Visible','on')
[204]301end
302if strcmp(ObjectStyle,'rectangle')||strcmp(ObjectStyle,'ellipse')
[379]303    set(handles.num_RangeX_2,'Visible','on')
[204]304else
[379]305   set(handles.num_RangeX_2,'Visible','off')
[204]306end
[379]307set(handles.num_RangeZ_1,'Visible','off')
308set(handles.num_RangeZ_2,'Visible','off')
309set(handles.num_DX,'Visible','off')
310set(handles.num_DY,'Visible','off')
311set(handles.num_DZ,'Visible','off')
[912]312set(handles.num_RangeInterp,'Visible','off')
[204]313
314switch ObjectStyle
315    case 'points'
[675]316        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around each point')
[379]317%         set(handles.XObject,'TooltipString','XObject: set of x coordinates of the points')
318%         set(handles.YObject,'TooltipString','YObject: set of y coordinates of the points')
319%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates of the points')
[204]320    case {'line','polyline','polygon'}
[675]321        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around the line')
[379]322         set(handles.Coord,'TooltipString','Coord: table of x,y, z coordinates defining the line')
323%         set(handles.YObject,'TooltipString','YObject: set of y coordinates defining the line')
324%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates defining the line')
[581]325        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
[379]326            set(handles.num_DX,'Visible','on')
327            set(handles.num_DX,'TooltipString','num_DX: mesh for the interpolated field along the line')
[912]328            set(handles.num_RangeInterp,'Visible','on')
[204]329        end       
330    case {'rectangle','ellipse'}
[675]331        set(handles.num_RangeX_2,'TooltipString',['num_RangeX_2: half length of the ' ObjectStyle])
332        set(handles.num_RangeY_2,'TooltipString',['num_RangeY_2: half width of the ' ObjectStyle])
[954]333    case {'plane','plane_z'} 
[961]334%        set(handles.num_Angle_3,'Visible','on')
[379]335        set(handles.num_RangeX_1,'Visible','on')
336        set(handles.num_RangeX_2,'Visible','on')
337        set(handles.num_RangeY_1,'Visible','on')
338        set(handles.num_RangeY_2,'Visible','on')
339        set(handles.num_RangeZ_2,'TooltipString','num_ZMax: range of projection normal to the plane')
[204]340        if test3D
[379]341            set(handles.num_Angle_2,'Visible','on')
342            set(handles.num_Angle_1,'Visible','on')
[961]343            set(handles.num_Angle_1,'String','90')
[967]344            %set(handles.Coord,'Data',[0 0 0])
[379]345            set(handles.num_RangeZ_2,'Visible','on')
[204]346        end
[581]347        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
[379]348            set(handles.num_DX,'Visible','on')
349            set(handles.num_DY,'Visible','on')
[912]350            set(handles.num_RangeInterp,'Visible','on')
[204]351        else
[379]352            set(handles.num_DX,'Visible','off')
353            set(handles.num_DY,'Visible','off')
[204]354        end
[912]355%         if  isequal(ProjMode,'interp_lin')
356%             set(handles.num_DZ,'Visible','on') 
357%         end
[204]358     case {'volume'} 
[379]359        set(handles.num_RangeX_1,'Visible','on')
360        set(handles.num_RangeX_2,'Visible','on')
361        set(handles.num_RangeY_1,'Visible','on')
362        set(handles.num_RangeY_2,'Visible','on')
[204]363        set(handles.XObject,'TooltipString',['XObject:  x coordinate of the axis origin for the ' ObjectStyle])
364        set(handles.YObject,'TooltipString',['YObject:  y coordinate of the axis origin for the ' ObjectStyle])
[379]365        set(handles.num_Angle_1,'Visible','on')
366        set(handles.num_Angle_2,'Visible','on')
[965]367        %set(handles.num_Angle_3,'Visible','on')
[379]368        set(handles.num_RangeZ_1,'Visible','on')
369        set(handles.num_RangeZ_2,'Visible','on')
[581]370        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
[379]371            set(handles.num_DX,'Visible','on')
372            set(handles.num_DY,'Visible','on')
373            set(handles.num_DZ,'Visible','on')
[204]374        else
[379]375            set(handles.num_DX,'Visible','off')
376            set(handles.num_DY,'Visible','off')
377            set(handles.num_DZ,'Visible','off')
[204]378        end
379end
[864]380% set default values read in the plot of uvmat to initiate the mesh
381if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
[1001]382    huvmat=findobj('Tag','uvmat');%find the current uvmat interface handle
383    if ~isempty(huvmat)
[912]384        UvData=get(huvmat,'UserData');%Data associated to the current uvmat interface
[1001]385        if isempty(str2num(get(handles.num_DX,'String')))||isempty(str2num(get(handles.num_DY,'String')));
386            %         Field=UvData.Field;
387            if  isfield(UvData.Field,'CoordMesh')&&~isempty(UvData.Field.CoordMesh)
388                set(handles.num_DX,'String',num2str(UvData.Field.CoordMesh))
389                set(handles.num_DY,'String',num2str(UvData.Field.CoordMesh))
390                set(handles.num_RangeX_1,'String',num2str(UvData.Field.XMin))
391                set(handles.num_RangeX_2,'String',num2str(UvData.Field.XMax))
392                set(handles.num_RangeY_1,'String',num2str(UvData.Field.YMin))
393                set(handles.num_RangeY_2,'String',num2str(UvData.Field.YMax))
394            end
395            if isempty(get(handles.CoordUnit,'String'))&& isfield(UvData.Field,'CoordUnit')
396                set(handles.CoordUnit,'String',UvData.Field.CoordUnit)
397            end
[864]398        end
399    end
[922]400    if isempty(str2num(get(handles.num_RangeInterp,'String'))) && isfield(UvData,'Field')
[1001]401        set(handles.num_RangeInterp,'String',num2str(3*UvData.Field.CoordMesh))% default interpolationlength= 3 meshes
[912]402    end
[864]403end
404
[204]405%------------------------------------------------------------------------
406
407%------------------------------------------------------------------------
[379]408function num_Angle_1_Callback(hObject, eventdata, handles)
[204]409update_slider(hObject, eventdata,handles)
410%------------------------------------------------------------------------
411%------------------------------------------------------------------------
[379]412function num_Angle_2_Callback(hObject, eventdata, handles)
[204]413update_slider(hObject, eventdata,handles)
414%------------------------------------------------------------------------
415function update_slider(hObject, eventdata,handles)
416%rotation angles
[379]417PlaneAngle(1)=str2num(get(handles.num_Angle_1,'String'));%first  angle in degrees
418PlaneAngle(2)=str2num(get(handles.num_Angle_2,'String'));%second  angle in degrees
[965]419%PlaneAngle(3)=str2num(get(handles.num_Angle_3,'String'));%second  angle in degrees
[212]420om=norm(PlaneAngle);%norm of rotation angle in radians
421OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
422cos_om=cos(pi*om/180);
423sin_om=sin(pi*om/180);
424coeff=OmAxis(3)*(1-cos_om);
425%components of the unity vector norm_plane normal to the projection plane
426norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
427norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
428norm_plane(3)=OmAxis(3)*coeff+cos_om;
[204]429huvmat=findobj('Tag','uvmat');%find the current uvmat interface handle
430UvData=get(huvmat,'UserData');%Data associated to the current uvmat interface
[912]431if isfield(UvData,'X') && isfield(UvData,'Y') && isfield(UvData,'Z')
[212]432    Z=norm_plane(1)*(UvData.X)+norm_plane(2)*(UvData.Y)+norm_plane(3)*(UvData.Z);
[204]433    set(handles.z_slider,'Min',min(Z))
434    set(handles.z_slider,'Max',max(Z))
435    ZMax_Callback(hObject, eventdata, handles)
436end
437%------------------------------------------------------------------------
[379]438function num_DX_Callback(hObject, eventdata, handles)
[204]439%------------------------------------------------------------------------
440%------------------------------------------------------------------------
[379]441function num_DY_Callback(hObject, eventdata, handles)
[204]442%------------------------------------------------------------------------
443%------------------------------------------------------------------------
[379]444function num_DZ_Callback(hObject, eventdata, handles)
[204]445%------------------------------------------------------------------------
446
447
448%------------------------------------------------------------------------
[680]449% --- Executes on button press in REFRESH: refresh the current object , refresh the object and its projected field
450%------------------------------------------------------------------------
451function REFRESH_Callback(hObject, eventdata, handles)
[204]452
[681]453set(handles.REFRESH,'BackgroundColor',[1 1 0])% indicate activation of REFRESH
[508]454drawnow
455
[630]456%% update the object in the GUI series if relevant
457if strcmp(get(handles.set_object,'Name'),'edit_object_series')
458    hseries=findobj(allchild(0),'Tag','series');
459    if ~isempty(hseries)
460        SeriesData=get(hseries,'UserData');
461    SeriesData.ProjObject=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
462    set(hseries,'UserData',SeriesData);
463    end
[680]464    set(handles.REFRESH,'BackgroundColor',[1 0 0])
[630]465    return
466end
467
[410]468%% read the object parameters in the GUI set_object
[388]469ObjectData=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
[871]470if isfield(ObjectData,'CoordLine')% remove CoordLine (not used as object feature)
471    ObjectData=rmfield(ObjectData,'CoordLine');
472end
[397]473if iscell(ObjectData.Coord)%check for empty line
474    ObjectData.Coord=[0 0 0];
475    hhset_object=guidata(handles.set_object);
476    set(hhset_object.Coord,'Data',ObjectData.Coord)
477end
[388]478checknan=isnan(sum(ObjectData.Coord,2));%check for NaN lines
479if ~isempty(checknan)
480    ObjectData.Coord(checknan,:)=[];%remove the NaN lines
481end
[402]482ObjectName=ObjectData.Name;%name of the current object defined in set_object
[309]483if isempty(ObjectName)
[432]484     ObjectName=ObjectData.Type;% name the object by the object type type by default
[204]485end
[413]486
[432]487%% read the current object selection in the GUI uvmat
[413]488huvmat=findobj('tag','uvmat');%find the current uvmat GUI handle
489UvData=get(huvmat,'UserData');%Data associated to the GUI uvmat
490hhuvmat=guidata(huvmat);%handles of the objects children of the  GUI uvmat
[432]491ListObject=get(hhuvmat.ListObject,'String');% list of objects displayed in uvmat
[625]492
[650]493if isequal(get(hhuvmat.CheckEditObject,'Value'),0) %we append a new object
[625]494    ListObject=[ListObject;{''}];
495    IndexObj=length(ListObject);
496    set(hhuvmat.ListObject,'String',ListObject)
497    set(hhuvmat.ListObject,'Value',IndexObj)
498    UvData.ProjObject{IndexObj}=[]; %create a new empty object
499    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; % axes for plot_object
500    UvData.ProjObject{IndexObj}.DisplayHandle.view_field=[]; %no plot handle before plot_field operation
[630]501else   
[625]502    IndexObj=get(hhuvmat.ListObject,'Value');% index of the selected object for display in uvmat
503end
504
[630]505%set or modify(edit mode) the name of the currently selected object
[445]506detectname=1;
507ObjectNameNew=ObjectName;
508vers=0;% index of the name
509ListOther=ListObject;
510ListOther(IndexObj)=[];
511while ~isempty(detectname)
512    detectname=find(strcmp(ObjectNameNew,ListOther),1);%test the existence of the proposed name in the list
513    if detectname% if the object name already exists
514        indstr=regexp(ObjectNameNew,'\D');%indices of non number characters
515        if indstr(end)<length(ObjectNameNew) %object name ends by a number
516            vers=str2double(ObjectNameNew(indstr(end)+1:end))+1;
517            ObjectNameNew=[ObjectNameNew(1:indstr(end)) num2str(vers)];
518        else
519            vers=vers+1;
520            ObjectNameNew=[ObjectNameNew(1:indstr(end)) '_' num2str(vers)];
[204]521        end
522    end
[445]523end
524ObjectName=ObjectNameNew;
525set(handles.Name,'String',ObjectName)% display the default name in set_object
526ListObject{IndexObj}=ObjectName;
527set(hhuvmat.ListObject,'String',ListObject);%complement the object list
[625]528set(hhuvmat.ListObject_1,'String',ListObject);%complement the object list
[650]529set(hhuvmat.CheckViewObject,'Value',1)% indicate that the currently selected objected is viewed on set_object
[622]530check_handle=isfield(UvData.ProjObject{IndexObj},'DisplayHandle') && isfield(UvData.ProjObject{IndexObj}.DisplayHandle,'uvmat')...
531    && ~isempty(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat) && ishandle(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat);
[445]532if check_handle
[622]533    obj_handle=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
[445]534end
[622]535UvData.ProjObject{IndexObj}=ObjectData;%record the current object properties in uvmat
[445]536if check_handle
[622]537    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=obj_handle; %preserve the object plot handle if valid
[445]538else
[622]539    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; %axes taken as object display handle by defualt
[204]540end
[309]541
[680]542%% refresh the field projected on the object
[432]543hview_field=[];%default
[445]544IndexObj_1=get(hhuvmat.ListObject_1,'Value');
[388]545if strcmp(ObjectData.ProjMode,'mask_inside')||strcmp(ObjectData.ProjMode,'mask_outside')||strcmp(ObjectData.ProjMode,'none')
546    PlotType='text';
547else
[581]548    % create tps coeff if needed for ProjMode 'interp_tps'
[586]549    if strcmp(ObjectData.ProjMode,'interp_tps')&&~isfield(UvData.Field,'Coord_tps')
550        %UvData.Field=calc_tps(UvData.Field,1);
551        [UvData.Field,errormsg]=tps_coeff_field(UvData.Field,1);
552        if ~isempty(errormsg)
553            msgbox_uvmat('ERROR', ['set_object/tps_coeff_field/' errormsg])
[680]554            set(handles.REFRESH,'enable','on')
[586]555            return
556        end
[508]557    end
[388]558    [ProjData,errormsg]= proj_field(UvData.Field,ObjectData);%project the current field of uvmat on ObjectData
559    if ~isempty(errormsg)
[586]560        msgbox_uvmat('ERROR', ['set_object/proj_field/' errormsg])
[680]561        set(handles.REFRESH,'enable','on')
[388]562        return
[586]563    end
[445]564    if isequal(IndexObj_1,IndexObj) % if  the projection is in uvmat
[586]565        PlotType=plot_field(ProjData,hhuvmat.PlotAxes,read_GUI(get(hhuvmat.PlotAxes,'parent')));%update the current uvmat plot
[491]566    else  % if the projection is in view_field
[413]567        hview_field=findobj(allchild(0),'tag','view_field');
568        if isempty(hview_field)
[429]569            hview_field=view_field(ProjData); %open the view_field GUI for plot
[413]570        else
571            hhview_field=guidata(hview_field);
[511]572            [PlotType,PlotParam]=plot_field(ProjData,hhview_field.PlotAxes,read_GUI(hview_field));%update an existing  plot in view_field
[591]573            errormsg=fill_GUI(PlotParam,hview_field);
[569]574            if ~isempty(errormsg)
575                msgbox_uvmat('ERROR',errormsg)
576                return
577            end
[586]578            %     write_plot_param(hhview_field,PlotParam); %update the display of plotting parameters for the current object
[413]579        end
[429]580        haxes=findobj(hview_field,'tag','axes3');
581        Data=get(hview_field,'UserData');
582        if strcmp(get(haxes,'Visible'),'off')%sempty(PlotParam.Coordinates)% case of no plot display (pure text table)
583            h_TableDisplay=findobj(hview_field,'tag','TableDisplay');
584            pos_table=get(h_TableDisplay,'Position');
585            pos=get(hview_field,'Position');
586            set(hview_field,'Position',[pos(1)+pos(3)-pos_table(3) pos(2)+pos(4)-pos_table(4) pos_table(3) pos_table(4)])
587            drawnow
588            set(hview_field,'UserData',Data);% restore the previously stored GUI position after GUI resizing
589        else
590            set(hview_field,'Position',Data.GUISize)
591        end
[388]592    end
[227]593end
[429]594
[680]595%% update the object refresh
[622]596hobject=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
[445]597% if we are editing the object used for projection in uvmat
598if isequal(IndexObj_1,IndexObj)
599    %update the representation of the current object for projection field represented in view_field
[622]600    for iobj=1:numel(UvData.ProjObject)
601        UvData.ProjObject{iobj}.DisplayHandle.uvmat=...
602            plot_object(UvData.ProjObject{iobj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{iobj}.DisplayHandle.uvmat,'b');
[432]603    end
[445]604else %  we are editing the object used for projection field represented in view_field
605    %update the representation of the current object in uvmat
[622]606    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=...
607             plot_object(UvData.ProjObject{IndexObj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'m');
[680]608    %indicate the object index in the user data of the object refresh (needed for further mouse editing)
[622]609    ObjectInfo=get(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData');
[445]610    ObjectInfo.IndexObj=IndexObj;
[622]611    set(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData',ObjectInfo)
[445]612    % update the representation of all objects in view_field
[622]613    for iobj=1:numel(UvData.ProjObject)
[729]614        if isfield(UvData.ProjObject{iobj},'DisplayHandle') && isfield(UvData.ProjObject{iobj}.DisplayHandle,'view_field')
[622]615            UvData.ProjObject{iobj}.DisplayHandle.view_field=...
616                plot_object(UvData.ProjObject{iobj},UvData.ProjObject{iobj},UvData.ProjObject{iobj}.DisplayHandle.view_field,'b');
[445]617        end
[432]618    end
619end
620set(huvmat,'UserData',UvData)
621
[204]622%% update the GUI uvmat
[650]623set(hhuvmat.CheckEditObject,'Value',1) % set uvmat to object edit mode to allow further object update
624set(hhuvmat.CheckViewField,'Value',1)
[681]625
[680]626set(handles.REFRESH,'BackgroundColor',[1 0 0])
[681]627set(handles.num_RangeY_2,'BackgroundColor',[1 1 1])
628
[772]629% --- Executes on button press in DisplayCoord.
630function DisplayCoord_Callback(hObject, eventdata, handles)
[738]631global Coord
632Coord=get(handles.Coord,'Data');
633evalin('base','global Coord')%make Coord global in the workspace
634display('object coordinates:')
635evalin('base','Coord') %display Coord in the workspace
636commandwindow; %brings the Matlab command window to the front
637
[204]638%----------------------------------------------------
[379]639function num_RangeY_1_Callback(hObject, eventdata, handles)
[204]640%------------------------------------------------------------------------
641
[379]642function num_RangeZ_1_Callback(hObject, eventdata, handles)
[204]643%------------------------------------------------------------------------
644
[379]645function num_RangeZ_2_Callback(hObject, eventdata, handles)
646DZ=str2num(get(handles.num_RangeZ_2,'String'));
[204]647ZMin=get(handles.z_slider,'Min');
648ZMax=get(handles.z_slider,'Max');
649if ~isequal(ZMax-ZMin,0)
650    rel_step(1)=DZ/(ZMax-ZMin);
651    rel_step(2)=0.2;
652    set(handles.z_slider,'SliderStep',rel_step)
653end
654%------------------------------------------------------------------------
[379]655function num_RangeY_2_Callback(hObject, eventdata, handles)
[204]656%------------------------------------------------------------------------
657
[379]658function num_RangeX_1_Callback(hObject, eventdata, handles)
[204]659%------------------------------------------------------------------------
660
[379]661function num_RangeX_2_Callback(hObject, eventdata, handles)
[681]662
[204]663%------------------------------------------------------------------------
664%------------------------------------------------------------------------
665function SAVE_Callback(hObject, eventdata, handles)
666% ------------------------------------------------------
[379]667Object=read_GUI(handles.set_object);
[871]668if isfield(Object,'CoordLine')% remove CoordLine (not used as object feature)
669    Object=rmfield(Object,'CoordLine');
670end
[204]671huvmat=findobj('Tag','uvmat');
672if isempty(huvmat)
673    huvmat=findobj(allchild(0),'Name','series');
674end
675hchild=get(huvmat,'Children');
676hrootpath=findobj(hchild,'Tag','RootPath');
677if isempty(hrootpath)
678    RootPath='';
679else
680    RootPath=get(hrootpath,'String');
681    if iscell(RootPath)
682        RootPath=RootPath{1};
683    end
684end
685title={'object name'};
[667]686dir_save=uigetfile_uvmat('select the folder for the new xml object file:',RootPath,'uigetdir');
687if ~isempty(dir_save)
688    ObjectName=get(handles.Name,'String');
689    if ~isempty(ObjectName)&&~strcmp(ObjectName,'')
[675]690        def=[ObjectName '.xml'];
[667]691    else
[675]692        def=[Object.Style '.xml'];
[667]693    end
[705]694    displ_txt={['save object in' dir_save]; 'with file name (.xml):'};%default display
[667]695    menu=get(handles.ProjMode,'String');
696    value=get(handles.ProjMode,'Value');
697    ProjMode=menu{value};
698    if strcmp(ProjMode,'mask_inside')||strcmp(ProjMode,'mask_outside')
[745]699        displ_txt=[displ_txt; '(note: to create a mask image, use ''Tools/make mask'' on the upper bar menu of uvmat)'];
[667]700    end
[675]701    answer=msgbox_uvmat('INPUT_TXT',displ_txt,def);
[705]702    if ischar(answer)
703        FullName=fullfile(dir_save,answer);
[667]704        t=struct2xml(Object);
705        t=set(t,1,'name','ProjObject');
[912]706        try
707            save(t,FullName)
708            msgbox_uvmat('CONFIRMATION',[FullName  ' saved'])
709        catch ME
710            msgbox_uvmat('ERROR',ME.message)
711        end
[667]712    end
[204]713end
[227]714
[204]715%------------------------------------------------------------------------
716% --- Executes on slider movement.
717function z_slider_Callback(hObject, eventdata, handles)
718%---------------------------------------------------------
719Z_value=get(handles.z_slider,'Value');
720%rotation angles
[965]721PlaneAngle=[0 0];
[227]722norm_plane=[0 0 1];
723cos_om=1;
724sin_om=0;
725
[379]726PlaneAngle(1)=str2double(get(handles.num_Angle_1,'String'));%first  angle in degrees
727PlaneAngle(2)=str2double(get(handles.num_Angle_2,'String'));%second  angle in degrees
[964]728%PlaneAngle(3)=str2double(get(handles.num_Angle_3,'String'));%second  angle in degrees
[227]729PlaneAngle=(pi/180)*PlaneAngle;
[964]730M2=[cos(PlaneAngle(2)) sin(PlaneAngle(2)) 0;-sin(PlaneAngle(2)) cos(PlaneAngle(2)) 0;0 0 1];
731M1=[1 0 0;0 cos(PlaneAngle(1)) sin(PlaneAngle(1));0 -sin(PlaneAngle(1)) cos(PlaneAngle(1))];
732M=M1*M2;
733norm_plane=M*[0 0 1]';
734
735% om=norm(PlaneAngle);%norm of rotation angle in radians
736% if isequal(om,0)
737%     norm_plane=[0 0 1];
738% else
739%     OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
740%     cos_om=cos(om);
741%     sin_om=sin(om);
742%     coeff=OmAxis(3)*(1-cos_om);
743%     %components of the unity vector norm_plane normal to the projection plane
744%     norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
745%     norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
746%     norm_plane(3)=OmAxis(3)*coeff+cos_om;
747% end
[747]748Coord=get(handles.Coord,'Data');
749Coord(3)=Z_value;
750set(handles.Coord,'Data',Coord)
[204]751
[388]752% update graph
[680]753REFRESH_Callback(hObject, eventdata, handles)
[227]754
[204]755%------------------------------------------------------------------------
756% --- Executes on button press in HELP.
757function HELP_Callback(hObject, eventdata, handles)
[227]758%------------------------------------------------------------------------
[773]759web('http://servforge.legi.grenoble-inp.fr/projects/soft-uvmat/wiki/UvmatHelp#ProjObject')
[204]760
[850]761%------------------------------------------------------------------------
[674]762% --- Executes when selected cell(s) is changed in ListCoord.
[850]763%------------------------------------------------------------------------
[674]764function Coord_CellSelectionCallback(hObject, eventdata, handles)
765if ~isempty(eventdata.Indices)
766    iline=eventdata.Indices(1);% selected line number
[850]767    set(handles.CoordLine,'String',num2str(iline))
[674]768end
[379]769
[681]770
[965]771% function num_Angle_3_Callback(hObject, eventdata, handles)
772%
773% %------------------------------------------------------------------------
774% % --- Executes on key press with selection of a uicontrol
775% %------------------------------------------------------------------------
776% function KeyPressFcn(hObject, eventdata, handles)
777% set(handles.REFRESH,'BackgroundColor',[1 0 1])% se REFRESH to magenta color, indicates that refresh needs to be done
778% if strcmp(get(hObject,'Tag'),'num_Angle_3')
779%     set(handles.num_RangeX_1,'String','')
780%     set(handles.num_RangeX_2,'String','')
781%         set(handles.num_RangeY_1,'String','')
782%     set(handles.num_RangeY_2,'String','')
783% end
[681]784
[674]785%------------------------------------------------------------------------
[681]786% --- Executes on key press with focus on Coord and none of its controls.
787%------------------------------------------------------------------------
788function Coord_KeyPressFcn(hObject, eventdata, handles)
789
790set(handles.REFRESH,'BackgroundColor',[1 0 1])
[674]791xx=double(get(handles.set_object,'CurrentCharacter')); %get the keyboard character
[680]792if ismember(xx,[127 31])% delete, or downward
[674]793    Coord=get(handles.Coord,'Data');
[850]794    iline=str2double(get(handles.CoordLine,'String'));
[674]795            if isequal(xx, 31)
796                if isequal(iline,size(Coord,1))% arrow downward
797                Coord=[Coord;zeros(1,size(Coord,2))];
798                end
799            else
800    Coord(iline,:)=[];% suppress the current line
801            end
802    set(handles.Coord,'Data',Coord);
803end
[850]804
805%------------------------------------------------------------------------
806% --- Executes on button press in clear_line.
807%------------------------------------------------------------------------
808function clear_line_Callback(hObject, eventdata, handles)
809
810Coord=get(handles.Coord,'Data');
811iline=str2double(get(handles.CoordLine,'String'));
812if isempty(iline)
813    msgbox_uvmat('WARNING','no line suppressed, select a line in the table')
814else
815    Coord(iline,:)=[];
816    set(handles.REFRESH,'BackgroundColor',[1 0 1])
817    set(handles.Coord,'Data',Coord);
818    set(handles.CoordLine,'String','')
819    REFRESH_Callback(hObject,eventdata,handles)
820end
[911]821
822
823
824function num_RangeInterp_Callback(hObject, eventdata, handles)
[966]825
826
[970]827%
[966]828
829
[970]830% --- Executes on key press with focus on num_RangeX_2 and none of its controls.
831function suggest_refresh(hObject, eventdata, handles)
832set(handles.REFRESH,'BackgroundColor',[1 0 1])
Note: See TracBrowser for help on using the repository browser.