source: trunk/src/set_object.m @ 675

Last change on this file since 675 was 675, checked in by sommeria, 11 years ago

various bugs corrected

File size: 34.2 KB
Line 
1%'set_object': GUI to edit a projection object
2%------------------------------------------------------------------------
3% function hset_object= set_object(data, PlotHandles,ZBounds)
4% associated with the GUI set_object.fig
5%
6% OUTPUT:
7% hset_object: handle of the GUI figure
8%
9% INPUT:u
10% data: structure describing the object properties
11%    .Style=...
12%    .ProjMode
13%    .CoordType: 'phys' or 'px'
14%    .num_DX,.num_DY,.num_DZ : mesh along each dirction
15%    .RangeX, RangeY
16%    .Coord(j,i), i=1, 2, 3,  components x, y, z of j=1...n position(s) characterizing the object components
17% PlotHandles: handles for projection plots NO MORE USED
18% Zbounds: bounds on Z ( 3D case)
19%
20%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
21%  Copyright Joel Sommeria, 2008, LEGI / CNRS-UJF-INPG, sommeria@coriolis-legi.org.
22%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
23%     This file is part of the toolbox UVMAT.
24%
25%     UVMAT is free software; you can redistribute it and/or modify
26%     it under the terms of the GNU General Public License as published by
27%     the Free Software Foundation; either version 2 of the License, or
28%     (at your option) any later version.
29%
30%     UVMAT is distributed in the hope that it will be useful,
31%     but WITHOUT ANY WARRANTY; without even the implied warranty of
32%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
33%     GNU General Public License (file UVMAT/COPYING.txt) for more details.
34%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
35
36function varargout = set_object(varargin)
37
38% Last Modified by GUIDE v2.5 26-Jan-2012 22:00:47
39
40% Begin initialization code - DO NOT PLOT
41gui_Singleton = 1;
42gui_State = struct('gui_Name',       mfilename, ...
43                   'gui_Singleton',  gui_Singleton, ...
44                   'gui_OpeningFcn', @set_object_OpeningFcn, ...
45                   'gui_OutputFcn',  @set_object_OutputFcn, ...
46                   'gui_LayoutFcn',  [] , ...
47                   'gui_Callback',   []);
48if nargin & ischar(varargin{1})
49    gui_State.gui_Callback = str2func(varargin{1});
50end
51
52if nargout
53    [varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
54else
55    gui_mainfcn(gui_State, varargin{:});
56end
57% End initialization code - DO NOT PLOT
58%------------------------------------------------------------------------
59%------------------------------------------------------------------------
60% --- Executes just before set_object is made visible.
61%INPUT:
62% handles: handles of the set_object interface elements
63%'IndexObj': NON USED ANYMORE (To suppress) index of the object (on the UvData list) that set_object will modify
64%        if =[] or absent: index still undefined (create mode in uvmat)
65%        if=0; no associated object (used for series), the button 'PLOT' is  then unvisible
66%'data': read from an existing object selected in the interface
67%      .Name : class of object ('POINTS','LINE',....)
68%      .num_DX,num_DY,num_DZ; meshes for regular grids
69%      .Coord: object position coordinates
70%      .ParentButton: handle of the uicontrol object calling the interface
71% PlotHandles: set of handles of the elements contolling the plotting of the projected field:
72%  if =[] or absent, no plot (mask mode in uvmat)
73% parameters on the uvmat interface (obtained by 'get_plot_handle.m')
74function set_object_OpeningFcn(hObject, eventdata, handles, data, PlotHandles,ZBounds)
75%-------------------------------------------------------------------
76% Choose default command line output for set_object
77handles.output = hObject;
78% Update handles structure
79guidata(hObject, handles);
80
81%% position
82set(0,'Unit','pixels')
83ScreenSize=get(0,'ScreenSize');% get the size of the screen, to put the fig on the upper right
84Width=300;% fig width in pixels
85Height=600;
86Left=ScreenSize(3)- Width-40; %right edge close to the right, with margin=40
87Bottom=ScreenSize(4)-Height-40; %put fig at top right
88set(handles.set_object,'Unit','pixels')
89set(handles.set_object,'Position',[Left Bottom Width Height])
90
91%default
92if ~exist('ZBounds','var')
93    ZBounds=0; %default
94end
95set(handles.Coord,'KeyPressFcn',{@key_press_fcn,handles})%set keyboard action function (allow action on uvmat when set_object is in front)
96set(hObject,'WindowButtonDownFcn',{'mouse_down'})%set mouse click action function
97set(hObject,'DeleteFcn',{@closefcn})
98
99% fill the interface as set in the input data:
100if exist('data','var')
101    if isfield(data,'Coord') &&size(data.Coord,2)==3
102        set(handles.z_slider,'Visible','on')
103    else
104        set(handles.z_slider,'Visible','off')
105    end
106    if isfield(data,'TypeMenu')
107        set(handles.Type,'String',data.TypeMenu)
108    end
109    if isfield(data,'ProjModeMenu')
110        set(handles.ProjMode,'UserData',data.ProjModeMenu)% data.ProjModeMenu as default menu (used in Type_Callback)
111    end
112    errormsg=fill_GUI(data,handles.set_object);
113    if ~isempty(errormsg)
114        msgbox_uvmat('ERROR','bad data input in set_object')
115        return
116    end
117    Type_Callback(hObject, eventdata, handles)% update the GUI set_object depending on the object type   
118
119    if isfield(data,'RangeZ') && length(ZBounds) >= 2
120        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
121        DZ=max(data.RangeZ);%slider step
122        if ~isnan(ZBounds(1)) && ZBounds(2)~=ZBounds(1)
123            rel_step(1)=min(DZ/(ZBounds(2)-ZBounds(1)),0.2);%must be smaller than 1
124            rel_step(2)=0.1;
125            set(handles.z_slider,'Visible','on')
126            set(handles.z_slider,'Min',ZBounds(1))
127            set(handles.z_slider,'Max',ZBounds(2))
128            set(handles.z_slider,'SliderStep',rel_step)
129            set(handles.z_slider,'Value',(ZBounds(1)+ZBounds(2))/2)
130        end
131    end
132    if isfield(data,'RangeX')
133        if ischar(data.RangeX)
134            data.RangeX=str2num(data.RangeX);
135        end
136        set(handles.num_RangeX_2,'String',num2str(max(data.RangeX),3))
137        set(handles.num_RangeX_1,'String',num2str(min(data.RangeX),3))
138    end
139    if isfield(data,'RangeY')
140        if ischar(data.RangeY)
141            data.RangeY=str2num(data.RangeY);
142        end
143        set(handles.num_RangeY_2,'String',num2str(max(data.RangeY),3))
144        set(handles.num_RangeY_1,'String',num2str(min(data.RangeY),3))
145    end
146    if isfield(data,'RangeZ')
147        if ischar(data.RangeZ)
148            data.RangeZ=str2num(data.RangeZ);
149        end
150        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
151        if numel(data.RangeZ)>=2
152            set(handles.num_RangeZ_1,'String',num2str(min(data.RangeZ),3))
153        end
154    end 
155    if ~isfield(data,'Angle')
156        data.Angle=[0 0 0];
157    end
158%     if isfield(data,'Angle') && isequal(numel(data.Angle),3)
159         set(handles.num_Angle_1,'String',num2str(data.Angle(1)))
160         set(handles.num_Angle_2,'String',num2str(data.Angle(2)))
161         set(handles.num_Angle_3,'String',num2str(data.Angle(3)))
162%     end
163end
164set(get(handles.set_object,'children'),'enable','off')
165set(handles.SAVE,'enable','on')
166% set(handles.PLOT,'enable','off')
167
168
169%------------------------------------------------------------------------
170% --- Outputs from this function are returned to the command line.
171function varargout = set_object_OutputFcn(hObject, eventdata, handles)
172%------------------------------------------------------------------------
173% Get default command line output from handles structure
174varargout{1} = handles.output;
175varargout{2}=handles;
176
177%------------------------------------------------------------------------
178% executed when closing the GUI set_object
179function closefcn(gcbo,eventdata)
180%------------------------------------------------------------------------
181huvmat=findobj(allchild(0),'Tag','uvmat');%find the current uvmat interface handle
182if ~isempty(huvmat)
183    hhuvmat=guidata(huvmat);
184    set(hhuvmat.CheckViewObject,'value',0)%
185    set(hhuvmat.CheckEditObject,'Value',0)% desactivate the edit option
186    % deselect the object in ListObject when view_field is closed
187    if isempty(findobj(allchild(0),'Tag','view_field'))
188        ObjIndex=get(hhuvmat.ListObject,'Value');
189        ObjIndex=ObjIndex(1);%keep only the first object selected
190        set(hhuvmat.ListObject,'Value',ObjIndex)
191        % draw all object colors in blue (unselected) in uvmat
192        hother=[findobj(hhuvmat.PlotAxes,'Tag','proj_object');findobj(hhuvmat.PlotAxes,'Tag','DeformPoint')];%find all the proj object and deform point representations
193        for iobj=1:length(hother)
194            if isequal(get(hother(iobj),'Type'),'rectangle')||isequal(get(hother(iobj),'Type'),'patch')
195                set(hother(iobj),'EdgeColor','b')
196                if isequal(get(hother(iobj),'FaceColor'),'m')
197                    set(hother(iobj),'FaceColor','b')
198                end
199            elseif isequal(get(hother(iobj),'Type'),'image')
200                Acolor=get(hother(iobj),'CData');
201                Acolor(:,:,1)=zeros(size(Acolor,1),size(Acolor,2));
202                set(hother(iobj),'CData',Acolor);
203            else
204                set(hother(iobj),'Color','b')
205            end
206            set(hother(iobj),'Selected','off')
207        end
208    end
209end
210hseries=findobj(allchild(0),'Name','series');%find the current series interface handle
211if ~isempty(hseries)
212    hhseries=guidata(hseries);
213    set(hhseries.EditObject,'Value',0)
214end
215
216
217%------------------------------------------------------------------------
218% --- Executes on selection change in Type.
219function Type_Callback(hObject, eventdata, handles)
220%------------------------------------------------------------------------
221%style_prev=get(handles.Type,'UserData');%previous object style
222ListType=get(handles.Type,'String');
223Type=ListType{get(handles.Type,'Value')};
224% make correspondance between different object styles
225Coord=get(handles.Coord,'Data');
226
227%% set the number of lines in the Coord table depending on object type
228switch Type
229    case{'line'}
230        if size(Coord,1)<2
231            if isequal(size(Coord,2),3)
232                Coord=[Coord; 0 0 0];%add a line for edition (3D case)
233            else
234                Coord=[Coord; 0 0]; %add a line for edition (2D case)
235            end
236        else
237            Coord=Coord(1:2,:);
238        end
239    case{'rectangle','ellipse','plane','volume'}
240        Coord=Coord(1,:);
241end
242set(handles.Coord,'Data',Coord)
243
244%% set the projection menu and the corresponding options
245if isempty(get(handles.ProjMode,'UserData'))
246    switch Type
247        case {'points','line','plane'}
248            menu_proj={'projection';'interp_lin';'interp_tps';'none'};
249        case 'polyline'
250            menu_proj={'interp_lin';'interp_tps';'none'};
251        case {'polygon','rectangle','ellipse'}
252            menu_proj={'inside';'outside';'mask_inside';'mask_outside';'interp_lin';'interp_tps';'none'};
253        case 'volume'
254            menu_proj={'interp_lin';'none'};
255        otherwise
256            menu_proj={'projection';'interp_lin';'interp_tps';'none'};%default
257    end
258else
259    menu_proj=get(handles.ProjMode,'UserData');
260end
261ProjModeList=get(handles.ProjMode,'String');
262menu_index=find(strcmp(ProjModeList{get(handles.ProjMode,'Value')},menu_proj));
263if isempty(menu_index)
264    menu_index=1;%
265end
266set(handles.ProjMode,'Value',menu_index);% value index must not exceed the menu length
267set(handles.ProjMode,'String',menu_proj)
268ProjMode_Callback(hObject, eventdata, handles)
269
270%------------------------------------------------------------------------
271% --- Executes on selection change in ProjMode.
272%------------------------------------------------------------------------
273
274function ProjMode_Callback(hObject, eventdata, handles)
275menu=get(handles.ProjMode,'String');
276value=get(handles.ProjMode,'Value');
277ProjMode=menu{value};
278menu=get(handles.Type,'String');
279value=get(handles.Type,'Value');
280ObjectStyle=menu{value};
281%%%%%%%%% TODO
282test3D=0; %TODO: update  test3D=isequal(get(handles.ZObject,'Visible'),'on');%3D case
283%%%%%%%%%
284%default setting
285set(handles.num_Angle_1,'Visible','off')
286set(handles.num_Angle_2,'Visible','off')
287set(handles.num_Angle_3,'Visible','off')
288set(handles.num_RangeX_1,'Visible','off')
289set(handles.num_RangeX_2,'Visible','off')
290set(handles.num_RangeY_1,'Visible','off')
291if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
292    set(handles.num_RangeY_2,'Visible','off')
293else
294    set(handles.num_RangeY_2,'Visible','on')
295end
296if strcmp(ObjectStyle,'rectangle')||strcmp(ObjectStyle,'ellipse')
297    set(handles.num_RangeX_2,'Visible','on')
298else
299   set(handles.num_RangeX_2,'Visible','off')
300end
301set(handles.num_RangeZ_1,'Visible','off')
302set(handles.num_RangeZ_2,'Visible','off')
303set(handles.num_DX,'Visible','off')
304set(handles.num_DY,'Visible','off')
305set(handles.num_DZ,'Visible','off')
306
307switch ObjectStyle
308    case 'points'
309        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around each point')
310%         set(handles.XObject,'TooltipString','XObject: set of x coordinates of the points')
311%         set(handles.YObject,'TooltipString','YObject: set of y coordinates of the points')
312%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates of the points')
313    case {'line','polyline','polygon'}
314        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around the line')
315         set(handles.Coord,'TooltipString','Coord: table of x,y, z coordinates defining the line')
316%         set(handles.YObject,'TooltipString','YObject: set of y coordinates defining the line')
317%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates defining the line')
318        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
319            set(handles.num_DX,'Visible','on')
320            set(handles.num_DX,'TooltipString','num_DX: mesh for the interpolated field along the line')
321        end       
322    case {'rectangle','ellipse'}
323        set(handles.num_RangeX_2,'TooltipString',['num_RangeX_2: half length of the ' ObjectStyle])
324        set(handles.num_RangeY_2,'TooltipString',['num_RangeY_2: half width of the ' ObjectStyle])
325%         set(handles.XObject,'TooltipString',['XObject:  x coordinate of the ' Type ' centre'])
326%         set(handles.YObject,'TooltipString',['YObject:  y coordinate of the ' Type ' centre'])
327    case {'plane'} 
328        set(handles.num_Angle_3,'Visible','on')
329        set(handles.num_RangeX_1,'Visible','on')
330        set(handles.num_RangeX_2,'Visible','on')
331        set(handles.num_RangeY_1,'Visible','on')
332        set(handles.num_RangeY_2,'Visible','on')
333%         set(handles.XObject,'TooltipString',['XObject:  x coordinate of the axis origin for the ' Type])
334%         set(handles.YObject,'TooltipString',['YObject:  y coordinate of the axis origin for the ' Type])
335        set(handles.num_RangeZ_2,'TooltipString','num_ZMax: range of projection normal to the plane')
336        if test3D
337            set(handles.num_Angle_2,'Visible','on')
338            set(handles.num_Angle_1,'Visible','on')
339            set(handles.num_RangeZ_2,'Visible','on')
340        end
341        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
342            set(handles.num_DX,'Visible','on')
343            set(handles.num_DY,'Visible','on')
344        else
345            set(handles.num_DX,'Visible','off')
346            set(handles.num_DY,'Visible','off')
347        end
348        if  isequal(ProjMode,'interp_lin')
349            set(handles.num_DZ,'Visible','on') 
350        end
351     case {'volume'} 
352        set(handles.num_RangeX_1,'Visible','on')
353        set(handles.num_RangeX_2,'Visible','on')
354        set(handles.num_RangeY_1,'Visible','on')
355        set(handles.num_RangeY_2,'Visible','on')
356        set(handles.XObject,'TooltipString',['XObject:  x coordinate of the axis origin for the ' ObjectStyle])
357        set(handles.YObject,'TooltipString',['YObject:  y coordinate of the axis origin for the ' ObjectStyle])
358        set(handles.num_Angle_1,'Visible','on')
359        set(handles.num_Angle_2,'Visible','on')
360        set(handles.num_Angle_3,'Visible','on')
361        set(handles.num_RangeZ_1,'Visible','on')
362        set(handles.num_RangeZ_2,'Visible','on')
363        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
364            set(handles.num_DX,'Visible','on')
365            set(handles.num_DY,'Visible','on')
366            set(handles.num_DZ,'Visible','on')
367        else
368            set(handles.num_DX,'Visible','off')
369            set(handles.num_DY,'Visible','off')
370            set(handles.num_DZ,'Visible','off')
371        end
372end
373%------------------------------------------------------------------------
374
375%------------------------------------------------------------------------
376function num_Angle_1_Callback(hObject, eventdata, handles)
377update_slider(hObject, eventdata,handles)
378%------------------------------------------------------------------------
379%------------------------------------------------------------------------
380function num_Angle_2_Callback(hObject, eventdata, handles)
381update_slider(hObject, eventdata,handles)
382%------------------------------------------------------------------------
383function update_slider(hObject, eventdata,handles)
384%rotation angles
385PlaneAngle(1)=str2num(get(handles.num_Angle_1,'String'));%first  angle in degrees
386PlaneAngle(2)=str2num(get(handles.num_Angle_2,'String'));%second  angle in degrees
387PlaneAngle(3)=str2num(get(handles.num_Angle_3,'String'));%second  angle in degrees
388om=norm(PlaneAngle);%norm of rotation angle in radians
389OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
390cos_om=cos(pi*om/180);
391sin_om=sin(pi*om/180);
392coeff=OmAxis(3)*(1-cos_om);
393%components of the unity vector norm_plane normal to the projection plane
394norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
395norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
396norm_plane(3)=OmAxis(3)*coeff+cos_om;
397huvmat=findobj('Tag','uvmat');%find the current uvmat interface handle
398UvData=get(huvmat,'UserData');%Data associated to the current uvmat interface
399if isfield(UvData,'X') & isfield(UvData,'Y') & isfield(UvData,'Z')
400    Z=norm_plane(1)*(UvData.X)+norm_plane(2)*(UvData.Y)+norm_plane(3)*(UvData.Z);
401    set(handles.z_slider,'Min',min(Z))
402    set(handles.z_slider,'Max',max(Z))
403    ZMax_Callback(hObject, eventdata, handles)
404end
405%------------------------------------------------------------------------
406function num_DX_Callback(hObject, eventdata, handles)
407%------------------------------------------------------------------------
408%------------------------------------------------------------------------
409function num_DY_Callback(hObject, eventdata, handles)
410%------------------------------------------------------------------------
411%------------------------------------------------------------------------
412function num_DZ_Callback(hObject, eventdata, handles)
413%------------------------------------------------------------------------
414
415
416%------------------------------------------------------------------------
417% --- Executes on button press in PLOT: refresh the current object , plot the object and its projected field
418function PLOT_Callback(hObject, eventdata, handles)
419
420set(handles.PLOT,'BackgroundColor',[1 1 0])
421drawnow
422
423%% update the object in the GUI series if relevant
424if strcmp(get(handles.set_object,'Name'),'edit_object_series')
425    hseries=findobj(allchild(0),'Tag','series');
426    if ~isempty(hseries)
427        SeriesData=get(hseries,'UserData');
428    SeriesData.ProjObject=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
429    set(hseries,'UserData',SeriesData);
430    end
431    set(handles.PLOT,'BackgroundColor',[1 0 0])
432    return
433end
434
435%% read the object parameters in the GUI set_object
436ObjectData=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
437if iscell(ObjectData.Coord)%check for empty line
438    ObjectData.Coord=[0 0 0];
439    hhset_object=guidata(handles.set_object);
440    set(hhset_object.Coord,'Data',ObjectData.Coord)
441end
442checknan=isnan(sum(ObjectData.Coord,2));%check for NaN lines
443if ~isempty(checknan)
444    ObjectData.Coord(checknan,:)=[];%remove the NaN lines
445end
446ObjectName=ObjectData.Name;%name of the current object defined in set_object
447if isempty(ObjectName)
448     ObjectName=ObjectData.Type;% name the object by the object type type by default
449end
450
451%% read the current object selection in the GUI uvmat
452huvmat=findobj('tag','uvmat');%find the current uvmat GUI handle
453UvData=get(huvmat,'UserData');%Data associated to the GUI uvmat
454hhuvmat=guidata(huvmat);%handles of the objects children of the  GUI uvmat
455ListObject=get(hhuvmat.ListObject,'String');% list of objects displayed in uvmat
456
457if isequal(get(hhuvmat.CheckEditObject,'Value'),0) %we append a new object
458    ListObject=[ListObject;{''}];
459    IndexObj=length(ListObject);
460    set(hhuvmat.ListObject,'String',ListObject)
461    set(hhuvmat.ListObject,'Value',IndexObj)
462    UvData.ProjObject{IndexObj}=[]; %create a new empty object
463    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; % axes for plot_object
464    UvData.ProjObject{IndexObj}.DisplayHandle.view_field=[]; %no plot handle before plot_field operation
465else   
466    IndexObj=get(hhuvmat.ListObject,'Value');% index of the selected object for display in uvmat
467end
468
469%set or modify(edit mode) the name of the currently selected object
470detectname=1;
471ObjectNameNew=ObjectName;
472vers=0;% index of the name
473ListOther=ListObject;
474ListOther(IndexObj)=[];
475while ~isempty(detectname)
476    detectname=find(strcmp(ObjectNameNew,ListOther),1);%test the existence of the proposed name in the list
477    if detectname% if the object name already exists
478        indstr=regexp(ObjectNameNew,'\D');%indices of non number characters
479        if indstr(end)<length(ObjectNameNew) %object name ends by a number
480            vers=str2double(ObjectNameNew(indstr(end)+1:end))+1;
481            ObjectNameNew=[ObjectNameNew(1:indstr(end)) num2str(vers)];
482        else
483            vers=vers+1;
484            ObjectNameNew=[ObjectNameNew(1:indstr(end)) '_' num2str(vers)];
485        end
486    end
487end
488ObjectName=ObjectNameNew;
489set(handles.Name,'String',ObjectName)% display the default name in set_object
490ListObject{IndexObj}=ObjectName;
491set(hhuvmat.ListObject,'String',ListObject);%complement the object list
492set(hhuvmat.ListObject_1,'String',ListObject);%complement the object list
493set(hhuvmat.CheckViewObject,'Value',1)% indicate that the currently selected objected is viewed on set_object
494check_handle=isfield(UvData.ProjObject{IndexObj},'DisplayHandle') && isfield(UvData.ProjObject{IndexObj}.DisplayHandle,'uvmat')...
495    && ~isempty(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat) && ishandle(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat);
496if check_handle
497    obj_handle=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
498end
499UvData.ProjObject{IndexObj}=ObjectData;%record the current object properties in uvmat
500if check_handle
501    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=obj_handle; %preserve the object plot handle if valid
502else
503    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; %axes taken as object display handle by defualt
504end
505
506%% plot the field projected on the object
507hview_field=[];%default
508IndexObj_1=get(hhuvmat.ListObject_1,'Value');
509if strcmp(ObjectData.ProjMode,'mask_inside')||strcmp(ObjectData.ProjMode,'mask_outside')||strcmp(ObjectData.ProjMode,'none')
510    PlotType='text';
511else
512    % create tps coeff if needed for ProjMode 'interp_tps'
513    if strcmp(ObjectData.ProjMode,'interp_tps')&&~isfield(UvData.Field,'Coord_tps')
514        %UvData.Field=calc_tps(UvData.Field,1);
515        [UvData.Field,errormsg]=tps_coeff_field(UvData.Field,1);
516        if ~isempty(errormsg)
517            msgbox_uvmat('ERROR', ['set_object/tps_coeff_field/' errormsg])
518            set(handles.PLOT,'enable','on')
519            return
520        end
521    end
522    [ProjData,errormsg]= proj_field(UvData.Field,ObjectData);%project the current field of uvmat on ObjectData
523    if ~isempty(errormsg)
524        msgbox_uvmat('ERROR', ['set_object/proj_field/' errormsg])
525        set(handles.PLOT,'enable','on')
526        return
527    end
528    if isequal(IndexObj_1,IndexObj) % if  the projection is in uvmat
529        PlotType=plot_field(ProjData,hhuvmat.PlotAxes,read_GUI(get(hhuvmat.PlotAxes,'parent')));%update the current uvmat plot
530    else  % if the projection is in view_field
531        hview_field=findobj(allchild(0),'tag','view_field');
532        if isempty(hview_field)
533            hview_field=view_field(ProjData); %open the view_field GUI for plot
534        else
535            hhview_field=guidata(hview_field);
536            [PlotType,PlotParam]=plot_field(ProjData,hhview_field.PlotAxes,read_GUI(hview_field));%update an existing  plot in view_field
537            errormsg=fill_GUI(PlotParam,hview_field);
538            if ~isempty(errormsg)
539                msgbox_uvmat('ERROR',errormsg)
540                return
541            end
542            %     write_plot_param(hhview_field,PlotParam); %update the display of plotting parameters for the current object
543        end
544        haxes=findobj(hview_field,'tag','axes3');
545        Data=get(hview_field,'UserData');
546        if strcmp(get(haxes,'Visible'),'off')%sempty(PlotParam.Coordinates)% case of no plot display (pure text table)
547            h_TableDisplay=findobj(hview_field,'tag','TableDisplay');
548            pos_table=get(h_TableDisplay,'Position');
549            pos=get(hview_field,'Position');
550            set(hview_field,'Position',[pos(1)+pos(3)-pos_table(3) pos(2)+pos(4)-pos_table(4) pos_table(3) pos_table(4)])
551            drawnow
552            set(hview_field,'UserData',Data);% restore the previously stored GUI position after GUI resizing
553        else
554            set(hview_field,'Position',Data.GUISize)
555        end
556    end
557end
558
559%% update the object plot
560hobject=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
561% if we are editing the object used for projection in uvmat
562if isequal(IndexObj_1,IndexObj)
563    %update the representation of the current object for projection field represented in view_field
564    for iobj=1:numel(UvData.ProjObject)
565        UvData.ProjObject{iobj}.DisplayHandle.uvmat=...
566            plot_object(UvData.ProjObject{iobj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{iobj}.DisplayHandle.uvmat,'b');
567    end
568else %  we are editing the object used for projection field represented in view_field
569    %update the representation of the current object in uvmat
570    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=...
571             plot_object(UvData.ProjObject{IndexObj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'m');
572    %indicate the object index in the user data of the object plot (needed for further mouse editing)
573    ObjectInfo=get(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData');
574    ObjectInfo.IndexObj=IndexObj;
575    set(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData',ObjectInfo)
576    % update the representation of all objects in view_field
577    for iobj=1:numel(UvData.ProjObject)
578        if isfield(UvData.ProjObject{iobj}.DisplayHandle,'view_field')
579            UvData.ProjObject{iobj}.DisplayHandle.view_field=...
580                plot_object(UvData.ProjObject{iobj},UvData.ProjObject{iobj},UvData.ProjObject{iobj}.DisplayHandle.view_field,'b');
581        end
582    end
583end
584set(huvmat,'UserData',UvData)
585
586%% update the GUI uvmat
587set(hhuvmat.CheckEditObject,'Value',1) % set uvmat to object edit mode to allow further object update
588set(hhuvmat.CheckViewField,'Value',1)
589set(handles.PLOT,'BackgroundColor',[1 0 0])
590%------------------------------------------------------------------------
591% --- Executes on button press in MenuCoord.
592function MenuCoord_Callback(hObject, eventdata, handles)
593%------------------------------------------------------------------------
594%----------------------------------------------------
595function num_RangeY_1_Callback(hObject, eventdata, handles)
596%------------------------------------------------------------------------
597
598function num_RangeZ_1_Callback(hObject, eventdata, handles)
599%------------------------------------------------------------------------
600
601function num_RangeZ_2_Callback(hObject, eventdata, handles)
602DZ=str2num(get(handles.num_RangeZ_2,'String'));
603ZMin=get(handles.z_slider,'Min');
604ZMax=get(handles.z_slider,'Max');
605if ~isequal(ZMax-ZMin,0)
606    rel_step(1)=DZ/(ZMax-ZMin);
607    rel_step(2)=0.2;
608    set(handles.z_slider,'SliderStep',rel_step)
609end
610%------------------------------------------------------------------------
611function num_RangeY_2_Callback(hObject, eventdata, handles)
612%------------------------------------------------------------------------
613
614function num_RangeX_1_Callback(hObject, eventdata, handles)
615%------------------------------------------------------------------------
616
617function num_RangeX_2_Callback(hObject, eventdata, handles)
618%------------------------------------------------------------------------
619%------------------------------------------------------------------------
620function SAVE_Callback(hObject, eventdata, handles)
621% ------------------------------------------------------
622Object=read_GUI(handles.set_object);
623huvmat=findobj('Tag','uvmat');
624if isempty(huvmat)
625    huvmat=findobj(allchild(0),'Name','series');
626end
627hchild=get(huvmat,'Children');
628hrootpath=findobj(hchild,'Tag','RootPath');
629if isempty(hrootpath)
630    RootPath='';
631else
632    RootPath=get(hrootpath,'String');
633    if iscell(RootPath)
634        RootPath=RootPath{1};
635    end
636end
637title={'object name'};
638dir_save=uigetfile_uvmat('select the folder for the new xml object file:',RootPath,'uigetdir');
639if ~isempty(dir_save)
640    ObjectName=get(handles.Name,'String');
641    if ~isempty(ObjectName)&&~strcmp(ObjectName,'')
642        def=[ObjectName '.xml'];
643    else
644        def=[Object.Style '.xml'];
645    end
646    displ_txt={'save object as an .xml file in';dir_save};%default display
647    menu=get(handles.ProjMode,'String');
648    value=get(handles.ProjMode,'Value');
649    ProjMode=menu{value};
650    if strcmp(ProjMode,'mask_inside')||strcmp(ProjMode,'mask_outside')
651        displ_txt={'save mask contour as an .xml file:'; 'to create a mask image, use save_mask on the GUI uvmat (lower right)'};
652    end
653    answer=msgbox_uvmat('INPUT_TXT',displ_txt,def);
654    if iscell(answer)
655        FullName=fullfile(dir_save,answer{1});
656        t=struct2xml(Object);
657        t=set(t,1,'name','ProjObject');
658        save(t,FullName)
659        msgbox_uvmat('CONFIRMATION',[FullName  ' saved'])
660    end
661end
662
663%------------------------------------------------------------------------
664% --- Executes on slider movement.
665function z_slider_Callback(hObject, eventdata, handles)
666%---------------------------------------------------------
667Z_value=get(handles.z_slider,'Value');
668%rotation angles
669PlaneAngle=[0 0 0];
670norm_plane=[0 0 1];
671cos_om=1;
672sin_om=0;
673
674PlaneAngle(1)=str2double(get(handles.num_Angle_1,'String'));%first  angle in degrees
675PlaneAngle(2)=str2double(get(handles.num_Angle_2,'String'));%second  angle in degrees
676PlaneAngle(3)=str2double(get(handles.num_Angle_3,'String'));%second  angle in degrees
677PlaneAngle=(pi/180)*PlaneAngle;
678om=norm(PlaneAngle);%norm of rotation angle in radians
679if isequal(om,0)
680    norm_plane=[0 0 1];
681else
682    OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
683    cos_om=cos(om);
684    sin_om=sin(om);
685    coeff=OmAxis(3)*(1-cos_om);
686    %components of the unity vector norm_plane normal to the projection plane
687    norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
688    norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
689    norm_plane(3)=OmAxis(3)*coeff+cos_om;
690end
691
692% update graph
693PLOT_Callback(hObject, eventdata, handles)
694
695%------------------------------------------------------------------------
696% --- Executes on button press in HELP.
697function HELP_Callback(hObject, eventdata, handles)
698%------------------------------------------------------------------------
699web('http://servforge.legi.grenoble-inp.fr/projects/soft-uvmat/wiki/UvmatHelp#a6-Projectionobjects:')
700% path_to_uvmat=which ('uvmat');% check the path of uvmat
701% pathelp=fileparts(path_to_uvmat);
702% helpfile=fullfile(pathelp,'uvmat_doc','uvmat_doc.html');
703% if ~isempty(dir(helpfile)), msgbox_uvmat('ERROR','Please put the help file uvmat_doc.html in the sub-directory /uvmat_doc of the UVMAT package')
704%     addpath (fullfile(pathelp,'uvmat_doc'))
705%     web([helpfile '#set_object'])
706% end
707%------------------------------------------------------------------------
708
709function Name_Callback(hObject, eventdata, handles)
710% hObject    handle to Name (see GCBO)
711% eventdata  reserved - to be defined in a future version of MATLAB
712% handles    structure with handles and user data (see GUIDATA)
713
714% Hints: get(hObject,'String') returns contents of Name as text
715%        str2double(get(hObject,'String')) returns contents of Name as a double
716
717%------------------------------------------------------------------------
718% --- Executes when entered data in editable cell(s) in Coord.
719function Coord_CellEditCallback(hObject, eventdata, handles)
720%------------------------------------------------------------------------
721ListType=get(handles.Type,'String');
722Type=ListType{get(handles.Type,'Value')};
723switch Type
724    % add lines if multi line input needed
725    case{'points','polyline','polygon'}
726        Input=str2num(eventdata.EditData);%pasted input
727        Coord=get(handles.Coord,'Data');
728        iline=eventdata.Indices(1);% selected line number
729        if size(Coord,1)<iline+numel(Input)
730            Coord=[Coord ; zeros(iline+numel(Input)-size(Coord,1),size(Coord,2))];% append zeros to fit the new column
731        end
732        Coord(iline:iline+numel(Input)-1,eventdata.Indices(2))=Input';
733        set(handles.Coord,'Data',Coord)
734end
735
736% --- Executes when selected cell(s) is changed in ListCoord.
737function Coord_CellSelectionCallback(hObject, eventdata, handles)
738
739if ~isempty(eventdata.Indices)
740    iline=eventdata.Indices(1);% selected line number
741    set(handles.Coord,'UserData',iline)
742end
743
744%------------------------------------------------------------------------
745% --- 'key_press_fcn:' function activated when a key is pressed on the keyboard
746%------------------------------------------------------------------------
747function key_press_fcn(hObject,eventdata,handles)
748
749xx=double(get(handles.set_object,'CurrentCharacter')); %get the keyboard character
750if ismember(xx,[8 127 31])%backspace or delete, or downward
751    Coord=get(handles.Coord,'Data');
752    iline=get(handles.Coord,'UserData');
753            if isequal(xx, 31)
754                if isequal(iline,size(Coord,1))% arrow downward
755                Coord=[Coord;zeros(1,size(Coord,2))];
756                end
757            else
758    Coord(iline,:)=[];% suppress the current line
759            end
760    set(handles.Coord,'Data',Coord);
761end
762
763function num_Angle_3_Callback(hObject, eventdata, handles)
764% hObject    handle to num_Angle_3 (see GCBO)
765% eventdata  reserved - to be defined in a future version of MATLAB
766% handles    structure with handles and user data (see GUIDATA)
767
768% Hints: get(hObject,'String') returns contents of num_Angle_3 as text
769%        str2double(get(hObject,'String')) returns contents of num_Angle_3 as a double
Note: See TracBrowser for help on using the repository browser.