source: trunk/src/set_object.m @ 689

Last change on this file since 689 was 684, checked in by sommeria, 11 years ago

corrections in proj_field: reducing the field of an image, and read_field: reading norm of vectors on gridded mesh

File size: 34.9 KB
Line 
1%'set_object': GUI to edit a projection object
2%------------------------------------------------------------------------
3% function hset_object= set_object(data, PlotHandles,ZBounds)
4% associated with the GUI set_object.fig
5%
6% OUTPUT:
7% hset_object: handle of the GUI figure
8%
9% INPUT:u
10% data: structure describing the object properties
11%    .Style=...
12%    .ProjMode
13%    .CoordType: 'phys' or 'px'
14%    .num_DX,.num_DY,.num_DZ : mesh along each dirction
15%    .RangeX, RangeY
16%    .Coord(j,i), i=1, 2, 3,  components x, y, z of j=1...n position(s) characterizing the object components
17% PlotHandles: handles for projection plots NO MORE USED
18% Zbounds: bounds on Z ( 3D case)
19%
20%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
21%  Copyright Joel Sommeria, 2008, LEGI / CNRS-UJF-INPG, sommeria@coriolis-legi.org.
22%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
23%     This file is part of the toolbox UVMAT.
24%
25%     UVMAT is free software; you can redistribute it and/or modify
26%     it under the terms of the GNU General Public License as published by
27%     the Free Software Foundation; either version 2 of the License, or
28%     (at your option) any later version.
29%
30%     UVMAT is distributed in the hope that it will be useful,
31%     but WITHOUT ANY WARRANTY; without even the implied warranty of
32%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
33%     GNU General Public License (file UVMAT/COPYING.txt) for more details.
34%AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
35
36function varargout = set_object(varargin)
37
38% Last Modified by GUIDE v2.5 02-Sep-2013 11:39:56
39
40% Begin initialization code - DO NOT REFRESH
41gui_Singleton = 1;
42gui_State = struct('gui_Name',       mfilename, ...
43                   'gui_Singleton',  gui_Singleton, ...
44                   'gui_OpeningFcn', @set_object_OpeningFcn, ...
45                   'gui_OutputFcn',  @set_object_OutputFcn, ...
46                   'gui_LayoutFcn',  [] , ...
47                   'gui_Callback',   []);
48if nargin & ischar(varargin{1})
49    gui_State.gui_Callback = str2func(varargin{1});
50end
51
52if nargout
53    [varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
54else
55    gui_mainfcn(gui_State, varargin{:});
56end
57% End initialization code - DO NOT REFRESH
58%------------------------------------------------------------------------
59%------------------------------------------------------------------------
60% --- Executes just before set_object is made visible.
61%INPUT:
62% handles: handles of the set_object interface elements
63%'IndexObj': NON USED ANYMORE (To suppress) index of the object (on the UvData list) that set_object will modify
64%        if =[] or absent: index still undefined (create mode in uvmat)
65%        if=0; no associated object (used for series), the button 'REFRESH' is  then unvisible
66%'data': read from an existing object selected in the interface
67%      .Name : class of object ('POINTS','LINE',....)
68%      .num_DX,num_DY,num_DZ; meshes for regular grids
69%      .Coord: object position coordinates
70%      .ParentButton: handle of the uicontrol object calling the interface
71% PlotHandles: set of handles of the elements contolling the plotting of the projected field:
72%  if =[] or absent, no refresh (mask mode in uvmat)
73% parameters on the uvmat interface (obtained by 'get_plot_handle.m')
74function set_object_OpeningFcn(hObject, eventdata, handles, data, PlotHandles,ZBounds)
75%-------------------------------------------------------------------
76% Choose default command line output for set_object
77handles.output = hObject;
78% Update handles structure
79guidata(hObject, handles);
80
81%% position
82set(0,'Unit','pixels')
83ScreenSize=get(0,'ScreenSize');% get the size of the screen, to put the fig on the upper right
84Width=300;% fig width in pixels
85Height=600;
86Left=ScreenSize(3)- Width-40; %right edge close to the right, with margin=40
87Bottom=ScreenSize(4)-Height-40; %put fig at top right
88set(handles.set_object,'Unit','pixels')
89set(handles.set_object,'Position',[Left Bottom Width Height])
90
91%default
92if ~exist('ZBounds','var')
93    ZBounds=0; %default
94end
95set(hObject,'WindowButtonDownFcn',{'mouse_down'})%set mouse click action function
96set(hObject,'DeleteFcn',{@closefcn})
97
98% fill the interface as set in the input data:
99if exist('data','var')
100    if isfield(data,'Coord') &&size(data.Coord,2)==3
101        set(handles.z_slider,'Visible','on')
102    else
103        set(handles.z_slider,'Visible','off')
104    end
105    if isfield(data,'TypeMenu')
106        set(handles.Type,'String',data.TypeMenu)
107    end
108    if isfield(data,'ProjModeMenu')
109        set(handles.ProjMode,'UserData',data.ProjModeMenu)% data.ProjModeMenu as default menu (used in Type_Callback)
110    end
111    errormsg=fill_GUI(data,handles.set_object);
112    if ~isempty(errormsg)
113        msgbox_uvmat('ERROR','bad data input in set_object')
114        return
115    end
116    Type_Callback(hObject, eventdata, handles)% update the GUI set_object depending on the object type   
117    set(handles.REFRESH,'BackgroundColor',[1 0 0])
118    if isfield(data,'RangeZ') && length(ZBounds) >= 2
119        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
120        DZ=max(data.RangeZ);%slider step
121        if ~isnan(ZBounds(1)) && ZBounds(2)~=ZBounds(1)
122            rel_step(1)=min(DZ/(ZBounds(2)-ZBounds(1)),0.2);%must be smaller than 1
123            rel_step(2)=0.1;
124            set(handles.z_slider,'Visible','on')
125            set(handles.z_slider,'Min',ZBounds(1))
126            set(handles.z_slider,'Max',ZBounds(2))
127            set(handles.z_slider,'SliderStep',rel_step)
128            set(handles.z_slider,'Value',(ZBounds(1)+ZBounds(2))/2)
129        end
130    end
131    if isfield(data,'RangeX')
132        if ischar(data.RangeX)
133            data.RangeX=str2num(data.RangeX);
134        end
135        set(handles.num_RangeX_2,'String',num2str(max(data.RangeX),3))
136        set(handles.num_RangeX_1,'String',num2str(min(data.RangeX),3))
137    end
138    if isfield(data,'RangeY')
139        if ischar(data.RangeY)
140            data.RangeY=str2num(data.RangeY);
141        end
142        set(handles.num_RangeY_2,'String',num2str(max(data.RangeY),3))
143        set(handles.num_RangeY_1,'String',num2str(min(data.RangeY),3))
144    end
145    if isfield(data,'RangeZ')
146        if ischar(data.RangeZ)
147            data.RangeZ=str2num(data.RangeZ);
148        end
149        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
150        if numel(data.RangeZ)>=2
151            set(handles.num_RangeZ_1,'String',num2str(min(data.RangeZ),3))
152        end
153    end 
154    if ~isfield(data,'Angle')
155        data.Angle=[0 0 0];
156    end
157%     if isfield(data,'Angle') && isequal(numel(data.Angle),3)
158         set(handles.num_Angle_1,'String',num2str(data.Angle(1)))
159         set(handles.num_Angle_2,'String',num2str(data.Angle(2)))
160         set(handles.num_Angle_3,'String',num2str(data.Angle(3)))
161%     end
162end
163set(get(handles.set_object,'children'),'enable','off')
164set(handles.SAVE,'enable','on')
165% set(handles.REFRESH,'enable','off')
166
167
168%------------------------------------------------------------------------
169% --- Outputs from this function are returned to the command line.
170function varargout = set_object_OutputFcn(hObject, eventdata, handles)
171%------------------------------------------------------------------------
172% Get default command line output from handles structure
173varargout{1} = handles.output;
174varargout{2}=handles;
175
176%------------------------------------------------------------------------
177% executed when closing the GUI set_object
178function closefcn(gcbo,eventdata)
179%------------------------------------------------------------------------
180huvmat=findobj(allchild(0),'Tag','uvmat');%find the current uvmat interface handle
181if ~isempty(huvmat)
182    hhuvmat=guidata(huvmat);
183    set(hhuvmat.CheckViewObject,'value',0)%
184    set(hhuvmat.CheckEditObject,'Value',0)% desactivate the edit option
185    % deselect the object in ListObject when view_field is closed
186    if isempty(findobj(allchild(0),'Tag','view_field'))
187        ObjIndex=get(hhuvmat.ListObject,'Value');
188        ObjIndex=ObjIndex(1);%keep only the first object selected
189        set(hhuvmat.ListObject,'Value',ObjIndex)
190        % draw all object colors in blue (unselected) in uvmat
191        hother=[findobj(hhuvmat.PlotAxes,'Tag','proj_object');findobj(hhuvmat.PlotAxes,'Tag','DeformPoint')];%find all the proj object and deform point representations
192        for iobj=1:length(hother)
193            if isequal(get(hother(iobj),'Type'),'rectangle')||isequal(get(hother(iobj),'Type'),'patch')
194                set(hother(iobj),'EdgeColor','b')
195                if isequal(get(hother(iobj),'FaceColor'),'m')
196                    set(hother(iobj),'FaceColor','b')
197                end
198            elseif isequal(get(hother(iobj),'Type'),'image')
199                Acolor=get(hother(iobj),'CData');
200                Acolor(:,:,1)=zeros(size(Acolor,1),size(Acolor,2));
201                set(hother(iobj),'CData',Acolor);
202            else
203                set(hother(iobj),'Color','b')
204            end
205            set(hother(iobj),'Selected','off')
206        end
207    end
208end
209hseries=findobj(allchild(0),'Name','series');%find the current series interface handle
210if ~isempty(hseries)
211    hhseries=guidata(hseries);
212    set(hhseries.EditObject,'Value',0)
213end
214
215
216%------------------------------------------------------------------------
217% --- Executes on selection change in Type.
218function Type_Callback(hObject, eventdata, handles)
219%------------------------------------------------------------------------
220
221ListType=get(handles.Type,'String');
222Type=ListType{get(handles.Type,'Value')};
223% make correspondance between different object styles
224Coord=get(handles.Coord,'Data');
225
226%% set the number of lines in the Coord table depending on object type
227switch Type
228    case{'line'}
229        if size(Coord,1)<2
230            if isequal(size(Coord,2),3)
231                Coord=[Coord; 0 0 0];%add a line for edition (3D case)
232            else
233                Coord=[Coord; 0 0]; %add a line for edition (2D case)
234            end
235        else
236            Coord=Coord(1:2,:);
237        end
238    case{'rectangle','ellipse','plane','volume'}
239        Coord=Coord(1,:);
240end
241set(handles.Coord,'Data',Coord)
242
243%% set the projection menu and the corresponding options
244if isempty(get(handles.ProjMode,'UserData'))
245    switch Type
246        case {'points','line','plane'}
247            menu_proj={'projection';'interp_lin';'interp_tps';'none'};
248        case 'polyline'
249            menu_proj={'interp_lin';'interp_tps';'none'};
250        case {'polygon','rectangle','ellipse'}
251            menu_proj={'inside';'outside';'mask_inside';'mask_outside';'interp_lin';'interp_tps';'none'};
252        case 'volume'
253            menu_proj={'interp_lin';'none'};
254        otherwise
255            menu_proj={'projection';'interp_lin';'interp_tps';'none'};%default
256    end
257else
258    menu_proj=get(handles.ProjMode,'UserData');
259end
260ProjModeList=get(handles.ProjMode,'String');
261menu_index=find(strcmp(ProjModeList{get(handles.ProjMode,'Value')},menu_proj));
262if isempty(menu_index)
263    menu_index=1;%
264end
265set(handles.ProjMode,'Value',menu_index);% value index must not exceed the menu length
266set(handles.ProjMode,'String',menu_proj)
267ProjMode_Callback(hObject, eventdata, handles)
268
269%------------------------------------------------------------------------
270% --- Executes on selection change in ProjMode.
271%------------------------------------------------------------------------
272function ProjMode_Callback(hObject, eventdata, handles)
273
274set(handles.REFRESH,'BackgroundColor',[1 0 1])
275menu=get(handles.ProjMode,'String');
276value=get(handles.ProjMode,'Value');
277ProjMode=menu{value};
278menu=get(handles.Type,'String');
279value=get(handles.Type,'Value');
280ObjectStyle=menu{value};
281%%%%%%%%% TODO
282test3D=0; %TODO: update  test3D=isequal(get(handles.ZObject,'Visible'),'on');%3D case
283%%%%%%%%%
284%default setting
285set(handles.num_Angle_1,'Visible','off')
286set(handles.num_Angle_2,'Visible','off')
287set(handles.num_Angle_3,'Visible','off')
288set(handles.num_RangeX_1,'Visible','off')
289set(handles.num_RangeX_2,'Visible','off')
290set(handles.num_RangeY_1,'Visible','off')
291if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
292    set(handles.num_RangeY_2,'Visible','off')
293else
294    set(handles.num_RangeY_2,'Visible','on')
295end
296if strcmp(ObjectStyle,'rectangle')||strcmp(ObjectStyle,'ellipse')
297    set(handles.num_RangeX_2,'Visible','on')
298else
299   set(handles.num_RangeX_2,'Visible','off')
300end
301set(handles.num_RangeZ_1,'Visible','off')
302set(handles.num_RangeZ_2,'Visible','off')
303set(handles.num_DX,'Visible','off')
304set(handles.num_DY,'Visible','off')
305set(handles.num_DZ,'Visible','off')
306
307switch ObjectStyle
308    case 'points'
309        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around each point')
310%         set(handles.XObject,'TooltipString','XObject: set of x coordinates of the points')
311%         set(handles.YObject,'TooltipString','YObject: set of y coordinates of the points')
312%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates of the points')
313    case {'line','polyline','polygon'}
314        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around the line')
315         set(handles.Coord,'TooltipString','Coord: table of x,y, z coordinates defining the line')
316%         set(handles.YObject,'TooltipString','YObject: set of y coordinates defining the line')
317%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates defining the line')
318        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
319            set(handles.num_DX,'Visible','on')
320            set(handles.num_DX,'TooltipString','num_DX: mesh for the interpolated field along the line')
321        end       
322    case {'rectangle','ellipse'}
323        set(handles.num_RangeX_2,'TooltipString',['num_RangeX_2: half length of the ' ObjectStyle])
324        set(handles.num_RangeY_2,'TooltipString',['num_RangeY_2: half width of the ' ObjectStyle])
325%         set(handles.XObject,'TooltipString',['XObject:  x coordinate of the ' Type ' centre'])
326%         set(handles.YObject,'TooltipString',['YObject:  y coordinate of the ' Type ' centre'])
327    case {'plane'} 
328        set(handles.num_Angle_3,'Visible','on')
329        set(handles.num_RangeX_1,'Visible','on')
330        set(handles.num_RangeX_2,'Visible','on')
331        set(handles.num_RangeY_1,'Visible','on')
332        set(handles.num_RangeY_2,'Visible','on')
333%         set(handles.XObject,'TooltipString',['XObject:  x coordinate of the axis origin for the ' Type])
334%         set(handles.YObject,'TooltipString',['YObject:  y coordinate of the axis origin for the ' Type])
335        set(handles.num_RangeZ_2,'TooltipString','num_ZMax: range of projection normal to the plane')
336        if test3D
337            set(handles.num_Angle_2,'Visible','on')
338            set(handles.num_Angle_1,'Visible','on')
339            set(handles.num_RangeZ_2,'Visible','on')
340        end
341        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
342            set(handles.num_DX,'Visible','on')
343            set(handles.num_DY,'Visible','on')
344        else
345            set(handles.num_DX,'Visible','off')
346            set(handles.num_DY,'Visible','off')
347        end
348        if  isequal(ProjMode,'interp_lin')
349            set(handles.num_DZ,'Visible','on') 
350        end
351     case {'volume'} 
352        set(handles.num_RangeX_1,'Visible','on')
353        set(handles.num_RangeX_2,'Visible','on')
354        set(handles.num_RangeY_1,'Visible','on')
355        set(handles.num_RangeY_2,'Visible','on')
356        set(handles.XObject,'TooltipString',['XObject:  x coordinate of the axis origin for the ' ObjectStyle])
357        set(handles.YObject,'TooltipString',['YObject:  y coordinate of the axis origin for the ' ObjectStyle])
358        set(handles.num_Angle_1,'Visible','on')
359        set(handles.num_Angle_2,'Visible','on')
360        set(handles.num_Angle_3,'Visible','on')
361        set(handles.num_RangeZ_1,'Visible','on')
362        set(handles.num_RangeZ_2,'Visible','on')
363        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
364            set(handles.num_DX,'Visible','on')
365            set(handles.num_DY,'Visible','on')
366            set(handles.num_DZ,'Visible','on')
367        else
368            set(handles.num_DX,'Visible','off')
369            set(handles.num_DY,'Visible','off')
370            set(handles.num_DZ,'Visible','off')
371        end
372end
373%------------------------------------------------------------------------
374
375%------------------------------------------------------------------------
376function num_Angle_1_Callback(hObject, eventdata, handles)
377update_slider(hObject, eventdata,handles)
378%------------------------------------------------------------------------
379%------------------------------------------------------------------------
380function num_Angle_2_Callback(hObject, eventdata, handles)
381update_slider(hObject, eventdata,handles)
382%------------------------------------------------------------------------
383function update_slider(hObject, eventdata,handles)
384%rotation angles
385PlaneAngle(1)=str2num(get(handles.num_Angle_1,'String'));%first  angle in degrees
386PlaneAngle(2)=str2num(get(handles.num_Angle_2,'String'));%second  angle in degrees
387PlaneAngle(3)=str2num(get(handles.num_Angle_3,'String'));%second  angle in degrees
388om=norm(PlaneAngle);%norm of rotation angle in radians
389OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
390cos_om=cos(pi*om/180);
391sin_om=sin(pi*om/180);
392coeff=OmAxis(3)*(1-cos_om);
393%components of the unity vector norm_plane normal to the projection plane
394norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
395norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
396norm_plane(3)=OmAxis(3)*coeff+cos_om;
397huvmat=findobj('Tag','uvmat');%find the current uvmat interface handle
398UvData=get(huvmat,'UserData');%Data associated to the current uvmat interface
399if isfield(UvData,'X') & isfield(UvData,'Y') & isfield(UvData,'Z')
400    Z=norm_plane(1)*(UvData.X)+norm_plane(2)*(UvData.Y)+norm_plane(3)*(UvData.Z);
401    set(handles.z_slider,'Min',min(Z))
402    set(handles.z_slider,'Max',max(Z))
403    ZMax_Callback(hObject, eventdata, handles)
404end
405%------------------------------------------------------------------------
406function num_DX_Callback(hObject, eventdata, handles)
407%------------------------------------------------------------------------
408%------------------------------------------------------------------------
409function num_DY_Callback(hObject, eventdata, handles)
410%------------------------------------------------------------------------
411%------------------------------------------------------------------------
412function num_DZ_Callback(hObject, eventdata, handles)
413%------------------------------------------------------------------------
414
415
416%------------------------------------------------------------------------
417% --- Executes on button press in REFRESH: refresh the current object , refresh the object and its projected field
418%------------------------------------------------------------------------
419function REFRESH_Callback(hObject, eventdata, handles)
420
421set(handles.REFRESH,'BackgroundColor',[1 1 0])% indicate activation of REFRESH
422drawnow
423
424%% update the object in the GUI series if relevant
425if strcmp(get(handles.set_object,'Name'),'edit_object_series')
426    hseries=findobj(allchild(0),'Tag','series');
427    if ~isempty(hseries)
428        SeriesData=get(hseries,'UserData');
429    SeriesData.ProjObject=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
430    set(hseries,'UserData',SeriesData);
431    end
432    set(handles.REFRESH,'BackgroundColor',[1 0 0])
433    return
434end
435
436%% read the object parameters in the GUI set_object
437ObjectData=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
438if iscell(ObjectData.Coord)%check for empty line
439    ObjectData.Coord=[0 0 0];
440    hhset_object=guidata(handles.set_object);
441    set(hhset_object.Coord,'Data',ObjectData.Coord)
442end
443checknan=isnan(sum(ObjectData.Coord,2));%check for NaN lines
444if ~isempty(checknan)
445    ObjectData.Coord(checknan,:)=[];%remove the NaN lines
446end
447ObjectName=ObjectData.Name;%name of the current object defined in set_object
448if isempty(ObjectName)
449     ObjectName=ObjectData.Type;% name the object by the object type type by default
450end
451
452%% read the current object selection in the GUI uvmat
453huvmat=findobj('tag','uvmat');%find the current uvmat GUI handle
454UvData=get(huvmat,'UserData');%Data associated to the GUI uvmat
455hhuvmat=guidata(huvmat);%handles of the objects children of the  GUI uvmat
456ListObject=get(hhuvmat.ListObject,'String');% list of objects displayed in uvmat
457
458if isequal(get(hhuvmat.CheckEditObject,'Value'),0) %we append a new object
459    ListObject=[ListObject;{''}];
460    IndexObj=length(ListObject);
461    set(hhuvmat.ListObject,'String',ListObject)
462    set(hhuvmat.ListObject,'Value',IndexObj)
463    UvData.ProjObject{IndexObj}=[]; %create a new empty object
464    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; % axes for plot_object
465    UvData.ProjObject{IndexObj}.DisplayHandle.view_field=[]; %no plot handle before plot_field operation
466else   
467    IndexObj=get(hhuvmat.ListObject,'Value');% index of the selected object for display in uvmat
468end
469
470%set or modify(edit mode) the name of the currently selected object
471detectname=1;
472ObjectNameNew=ObjectName;
473vers=0;% index of the name
474ListOther=ListObject;
475ListOther(IndexObj)=[];
476while ~isempty(detectname)
477    detectname=find(strcmp(ObjectNameNew,ListOther),1);%test the existence of the proposed name in the list
478    if detectname% if the object name already exists
479        indstr=regexp(ObjectNameNew,'\D');%indices of non number characters
480        if indstr(end)<length(ObjectNameNew) %object name ends by a number
481            vers=str2double(ObjectNameNew(indstr(end)+1:end))+1;
482            ObjectNameNew=[ObjectNameNew(1:indstr(end)) num2str(vers)];
483        else
484            vers=vers+1;
485            ObjectNameNew=[ObjectNameNew(1:indstr(end)) '_' num2str(vers)];
486        end
487    end
488end
489ObjectName=ObjectNameNew;
490set(handles.Name,'String',ObjectName)% display the default name in set_object
491ListObject{IndexObj}=ObjectName;
492set(hhuvmat.ListObject,'String',ListObject);%complement the object list
493set(hhuvmat.ListObject_1,'String',ListObject);%complement the object list
494set(hhuvmat.CheckViewObject,'Value',1)% indicate that the currently selected objected is viewed on set_object
495check_handle=isfield(UvData.ProjObject{IndexObj},'DisplayHandle') && isfield(UvData.ProjObject{IndexObj}.DisplayHandle,'uvmat')...
496    && ~isempty(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat) && ishandle(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat);
497if check_handle
498    obj_handle=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
499end
500UvData.ProjObject{IndexObj}=ObjectData;%record the current object properties in uvmat
501if check_handle
502    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=obj_handle; %preserve the object plot handle if valid
503else
504    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; %axes taken as object display handle by defualt
505end
506
507%% refresh the field projected on the object
508hview_field=[];%default
509IndexObj_1=get(hhuvmat.ListObject_1,'Value');
510if strcmp(ObjectData.ProjMode,'mask_inside')||strcmp(ObjectData.ProjMode,'mask_outside')||strcmp(ObjectData.ProjMode,'none')
511    PlotType='text';
512else
513    % create tps coeff if needed for ProjMode 'interp_tps'
514    if strcmp(ObjectData.ProjMode,'interp_tps')&&~isfield(UvData.Field,'Coord_tps')
515        %UvData.Field=calc_tps(UvData.Field,1);
516        [UvData.Field,errormsg]=tps_coeff_field(UvData.Field,1);
517        if ~isempty(errormsg)
518            msgbox_uvmat('ERROR', ['set_object/tps_coeff_field/' errormsg])
519            set(handles.REFRESH,'enable','on')
520            return
521        end
522    end
523    [ProjData,errormsg]= proj_field(UvData.Field,ObjectData);%project the current field of uvmat on ObjectData
524    if ~isempty(errormsg)
525        msgbox_uvmat('ERROR', ['set_object/proj_field/' errormsg])
526        set(handles.REFRESH,'enable','on')
527        return
528    end
529    if isequal(IndexObj_1,IndexObj) % if  the projection is in uvmat
530        PlotType=plot_field(ProjData,hhuvmat.PlotAxes,read_GUI(get(hhuvmat.PlotAxes,'parent')));%update the current uvmat plot
531    else  % if the projection is in view_field
532        hview_field=findobj(allchild(0),'tag','view_field');
533        if isempty(hview_field)
534            hview_field=view_field(ProjData); %open the view_field GUI for plot
535        else
536            hhview_field=guidata(hview_field);
537            [PlotType,PlotParam]=plot_field(ProjData,hhview_field.PlotAxes,read_GUI(hview_field));%update an existing  plot in view_field
538            errormsg=fill_GUI(PlotParam,hview_field);
539            if ~isempty(errormsg)
540                msgbox_uvmat('ERROR',errormsg)
541                return
542            end
543            %     write_plot_param(hhview_field,PlotParam); %update the display of plotting parameters for the current object
544        end
545        haxes=findobj(hview_field,'tag','axes3');
546        Data=get(hview_field,'UserData');
547        if strcmp(get(haxes,'Visible'),'off')%sempty(PlotParam.Coordinates)% case of no plot display (pure text table)
548            h_TableDisplay=findobj(hview_field,'tag','TableDisplay');
549            pos_table=get(h_TableDisplay,'Position');
550            pos=get(hview_field,'Position');
551            set(hview_field,'Position',[pos(1)+pos(3)-pos_table(3) pos(2)+pos(4)-pos_table(4) pos_table(3) pos_table(4)])
552            drawnow
553            set(hview_field,'UserData',Data);% restore the previously stored GUI position after GUI resizing
554        else
555            set(hview_field,'Position',Data.GUISize)
556        end
557    end
558end
559
560%% update the object refresh
561hobject=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
562% if we are editing the object used for projection in uvmat
563if isequal(IndexObj_1,IndexObj)
564    %update the representation of the current object for projection field represented in view_field
565    for iobj=1:numel(UvData.ProjObject)
566        UvData.ProjObject{iobj}.DisplayHandle.uvmat=...
567            plot_object(UvData.ProjObject{iobj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{iobj}.DisplayHandle.uvmat,'b');
568    end
569else %  we are editing the object used for projection field represented in view_field
570    %update the representation of the current object in uvmat
571    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=...
572             plot_object(UvData.ProjObject{IndexObj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'m');
573    %indicate the object index in the user data of the object refresh (needed for further mouse editing)
574    ObjectInfo=get(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData');
575    ObjectInfo.IndexObj=IndexObj;
576    set(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData',ObjectInfo)
577    % update the representation of all objects in view_field
578    for iobj=1:numel(UvData.ProjObject)
579        if isfield(UvData.ProjObject{iobj}.DisplayHandle,'view_field')
580            UvData.ProjObject{iobj}.DisplayHandle.view_field=...
581                plot_object(UvData.ProjObject{iobj},UvData.ProjObject{iobj},UvData.ProjObject{iobj}.DisplayHandle.view_field,'b');
582        end
583    end
584end
585set(huvmat,'UserData',UvData)
586
587%% update the GUI uvmat
588set(hhuvmat.CheckEditObject,'Value',1) % set uvmat to object edit mode to allow further object update
589set(hhuvmat.CheckViewField,'Value',1)
590
591set(handles.REFRESH,'BackgroundColor',[1 0 0])
592%set(handles.Coord,'BackgroundColor',[1 1 1])
593set(handles.num_RangeY_2,'BackgroundColor',[1 1 1])
594
595%------------------------------------------------------------------------
596% --- Executes on button press in MenuCoord.
597function MenuCoord_Callback(hObject, eventdata, handles)
598%------------------------------------------------------------------------
599%----------------------------------------------------
600function num_RangeY_1_Callback(hObject, eventdata, handles)
601%------------------------------------------------------------------------
602
603function num_RangeZ_1_Callback(hObject, eventdata, handles)
604%------------------------------------------------------------------------
605
606function num_RangeZ_2_Callback(hObject, eventdata, handles)
607DZ=str2num(get(handles.num_RangeZ_2,'String'));
608ZMin=get(handles.z_slider,'Min');
609ZMax=get(handles.z_slider,'Max');
610if ~isequal(ZMax-ZMin,0)
611    rel_step(1)=DZ/(ZMax-ZMin);
612    rel_step(2)=0.2;
613    set(handles.z_slider,'SliderStep',rel_step)
614end
615%------------------------------------------------------------------------
616function num_RangeY_2_Callback(hObject, eventdata, handles)
617%------------------------------------------------------------------------
618
619function num_RangeX_1_Callback(hObject, eventdata, handles)
620%------------------------------------------------------------------------
621
622function num_RangeX_2_Callback(hObject, eventdata, handles)
623
624%------------------------------------------------------------------------
625%------------------------------------------------------------------------
626function SAVE_Callback(hObject, eventdata, handles)
627% ------------------------------------------------------
628Object=read_GUI(handles.set_object);
629huvmat=findobj('Tag','uvmat');
630if isempty(huvmat)
631    huvmat=findobj(allchild(0),'Name','series');
632end
633hchild=get(huvmat,'Children');
634hrootpath=findobj(hchild,'Tag','RootPath');
635if isempty(hrootpath)
636    RootPath='';
637else
638    RootPath=get(hrootpath,'String');
639    if iscell(RootPath)
640        RootPath=RootPath{1};
641    end
642end
643title={'object name'};
644dir_save=uigetfile_uvmat('select the folder for the new xml object file:',RootPath,'uigetdir');
645if ~isempty(dir_save)
646    ObjectName=get(handles.Name,'String');
647    if ~isempty(ObjectName)&&~strcmp(ObjectName,'')
648        def=[ObjectName '.xml'];
649    else
650        def=[Object.Style '.xml'];
651    end
652    displ_txt={'save object as an .xml file in';dir_save};%default display
653    menu=get(handles.ProjMode,'String');
654    value=get(handles.ProjMode,'Value');
655    ProjMode=menu{value};
656    if strcmp(ProjMode,'mask_inside')||strcmp(ProjMode,'mask_outside')
657        displ_txt={'save mask contour as an .xml file:'; 'to create a mask image, use save_mask on the GUI uvmat (lower right)'};
658    end
659    answer=msgbox_uvmat('INPUT_TXT',displ_txt,def);
660    if iscell(answer)
661        FullName=fullfile(dir_save,answer{1});
662        t=struct2xml(Object);
663        t=set(t,1,'name','ProjObject');
664        save(t,FullName)
665        msgbox_uvmat('CONFIRMATION',[FullName  ' saved'])
666    end
667end
668
669%------------------------------------------------------------------------
670% --- Executes on slider movement.
671function z_slider_Callback(hObject, eventdata, handles)
672%---------------------------------------------------------
673Z_value=get(handles.z_slider,'Value');
674%rotation angles
675PlaneAngle=[0 0 0];
676norm_plane=[0 0 1];
677cos_om=1;
678sin_om=0;
679
680PlaneAngle(1)=str2double(get(handles.num_Angle_1,'String'));%first  angle in degrees
681PlaneAngle(2)=str2double(get(handles.num_Angle_2,'String'));%second  angle in degrees
682PlaneAngle(3)=str2double(get(handles.num_Angle_3,'String'));%second  angle in degrees
683PlaneAngle=(pi/180)*PlaneAngle;
684om=norm(PlaneAngle);%norm of rotation angle in radians
685if isequal(om,0)
686    norm_plane=[0 0 1];
687else
688    OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
689    cos_om=cos(om);
690    sin_om=sin(om);
691    coeff=OmAxis(3)*(1-cos_om);
692    %components of the unity vector norm_plane normal to the projection plane
693    norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
694    norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
695    norm_plane(3)=OmAxis(3)*coeff+cos_om;
696end
697
698% update graph
699REFRESH_Callback(hObject, eventdata, handles)
700
701%------------------------------------------------------------------------
702% --- Executes on button press in HELP.
703function HELP_Callback(hObject, eventdata, handles)
704%------------------------------------------------------------------------
705web('http://servforge.legi.grenoble-inp.fr/projects/soft-uvmat/wiki/UvmatHelp#a6-Projectionobjects:')
706% path_to_uvmat=which ('uvmat');% check the path of uvmat
707% pathelp=fileparts(path_to_uvmat);
708% helpfile=fullfile(pathelp,'uvmat_doc','uvmat_doc.html');
709% if ~isempty(dir(helpfile)), msgbox_uvmat('ERROR','Please put the help file uvmat_doc.html in the sub-directory /uvmat_doc of the UVMAT package')
710%     addpath (fullfile(pathelp,'uvmat_doc'))
711%     web([helpfile '#set_object'])
712% end
713%------------------------------------------------------------------------
714
715function Name_Callback(hObject, eventdata, handles)
716% hObject    handle to Name (see GCBO)
717% eventdata  reserved - to be defined in a future version of MATLAB
718% handles    structure with handles and user data (see GUIDATA)
719
720% Hints: get(hObject,'String') returns contents of Name as text
721%        str2double(get(hObject,'String')) returns contents of Name as a double
722
723%------------------------------------------------------------------------
724% --- Executes when entered data in editable cell(s) in Coord.
725function Coord_CellEditCallback(hObject, eventdata, handles)
726%------------------------------------------------------------------------
727%set(handles.Coord,'BackgroundColor',[1 1 0])
728% ListType=get(handles.Type,'String');
729% Type=ListType{get(handles.Type,'Value')};
730% switch Type
731%     % add lines if multi line input needed
732%     case{'points','polyline','polygon'}
733%         Input=str2num(eventdata.EditData);%pasted input
734%         Coord=get(handles.Coord,'Data');
735%         iline=eventdata.Indices(1);% selected line number
736%         if size(Coord,1)<iline+numel(Input)
737%             Coord=[Coord ; zeros(iline+numel(Input)-size(Coord,1),size(Coord,2))];% append zeros to fit the new column
738%         end
739%         Coord(iline:iline+numel(Input)-1,eventdata.Indices(2))=Input';
740%         set(handles.Coord,'Data',Coord)
741% end
742%------------------------------------------------------------------------
743% --- Executes when selected cell(s) is changed in ListCoord.
744%------------------------------------------------------------------------
745function Coord_CellSelectionCallback(hObject, eventdata, handles)
746
747if ~isempty(eventdata.Indices)
748    iline=eventdata.Indices(1);% selected line number
749    set(handles.Coord,'UserData',iline)% used possibly for line deletion or table extension, using key_press_fcn
750end
751
752
753function num_Angle_3_Callback(hObject, eventdata, handles)
754
755%------------------------------------------------------------------------
756% --- Executes on key press with selection of a uicontrol
757%------------------------------------------------------------------------
758function KeyPressFcn(hObject, eventdata, handles)
759set(handles.REFRESH,'BackgroundColor',[1 0 1])% se REFRESH to magenta color, indicates that refresh needs to be done
760if strcmp(get(hObject,'Tag'),'num_Angle_3')
761    set(handles.num_RangeX_1,'String','')
762    set(handles.num_RangeX_2,'String','')
763        set(handles.num_RangeY_1,'String','')
764    set(handles.num_RangeY_2,'String','')
765end
766
767%------------------------------------------------------------------------
768% --- Executes on key press with focus on Coord and none of its controls.
769%------------------------------------------------------------------------
770function Coord_KeyPressFcn(hObject, eventdata, handles)
771
772set(handles.REFRESH,'BackgroundColor',[1 0 1])
773xx=double(get(handles.set_object,'CurrentCharacter')); %get the keyboard character
774if ismember(xx,[127 31])% delete, or downward
775    Coord=get(handles.Coord,'Data');
776    iline=get(handles.Coord,'UserData');
777            if isequal(xx, 31)
778                if isequal(iline,size(Coord,1))% arrow downward
779                Coord=[Coord;zeros(1,size(Coord,2))];
780                end
781            else
782    Coord(iline,:)=[];% suppress the current line
783            end
784    set(handles.Coord,'Data',Coord);
785end
786
787
788
Note: See TracBrowser for help on using the repository browser.