source: trunk/src/set_object.m @ 968

Last change on this file since 968 was 967, checked in by sommeria, 5 years ago

3D cuts improved

File size: 37.1 KB
Line 
1%'set_object': GUI to edit a projection object
2%------------------------------------------------------------------------
3% function hset_object= set_object(data, PlotHandles,ZBounds)
4% associated with the GUI set_object.fig
5%
6% OUTPUT:
7% hset_object: handle of the GUI figure
8%
9% INPUT:u
10% data: structure describing the object properties
11%    .Style=...
12%    .ProjMode
13%    .CoordType: 'phys' or 'px'
14%    .num_DX,.num_DY,.num_DZ : mesh along each dirction
15%    .RangeX, RangeY
16%    .Coord(j,i), i=1, 2, 3,  components x, y, z of j=1...n position(s) characterizing the object components
17% PlotHandles: handles for projection plots NO MORE USED
18% Zbounds: bounds on Z ( 3D case)
19
20%=======================================================================
21% Copyright 2008-2016, LEGI UMR 5519 / CNRS UGA G-INP, Grenoble, France
22%   http://www.legi.grenoble-inp.fr
23%   Joel.Sommeria - Joel.Sommeria (A) legi.cnrs.fr
24%
25%     This file is part of the toolbox UVMAT.
26%
27%     UVMAT is free software; you can redistribute it and/or modify
28%     it under the terms of the GNU General Public License as published
29%     by the Free Software Foundation; either version 2 of the license,
30%     or (at your option) any later version.
31%
32%     UVMAT is distributed in the hope that it will be useful,
33%     but WITHOUT ANY WARRANTY; without even the implied warranty of
34%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
35%     GNU General Public License (see LICENSE.txt) for more details.
36%=======================================================================
37
38function varargout = set_object(varargin)
39
40% Last Modified by GUIDE v2.5 09-Jul-2016 20:25:37
41
42% Begin initialization code - DO NOT REFRESH
43gui_Singleton = 1;
44gui_State = struct('gui_Name',       mfilename, ...
45                   'gui_Singleton',  gui_Singleton, ...
46                   'gui_OpeningFcn', @set_object_OpeningFcn, ...
47                   'gui_OutputFcn',  @set_object_OutputFcn, ...
48                   'gui_LayoutFcn',  [] , ...
49                   'gui_Callback',   []);
50if nargin & ischar(varargin{1})
51    gui_State.gui_Callback = str2func(varargin{1});
52end
53
54if nargout
55    [varargout{1:nargout}] = gui_mainfcn(gui_State, varargin{:});
56else
57    gui_mainfcn(gui_State, varargin{:});
58end
59% End initialization code - DO NOT REFRESH
60%------------------------------------------------------------------------
61%------------------------------------------------------------------------
62% --- Executes just before set_object is made visible.
63%INPUT:
64% handles: handles of the set_object interface elements
65%'IndexObj': NON USED ANYMORE (To suppress) index of the object (on the UvData list) that set_object will modify
66%        if =[] or absent: index still undefined (create mode in uvmat)
67%        if=0; no associated object (used for series), the button 'REFRESH' is  then unvisible
68%'data': read from an existing object selected in the interface
69%      .Name : class of object ('POINTS','LINE',....)
70%      .num_DX,num_DY,num_DZ; meshes for regular grids
71%      .Coord: object position coordinates
72%      .ParentButton: handle of the uicontrol object calling the interface
73% PlotHandles: set of handles of the elements contolling the plotting of the projected field:
74%  if =[] or absent, no refresh (mask mode in uvmat)
75% parameters on the uvmat interface (obtained by 'get_plot_handle.m')
76function set_object_OpeningFcn(hObject, eventdata, handles, data, PlotHandles,ZBounds)
77%-------------------------------------------------------------------
78% Choose default command line output for set_object
79handles.output = hObject;
80% Update handles structure
81guidata(hObject, handles);
82
83%% position
84set(0,'Unit','pixels')
85ScreenSize=get(0,'ScreenSize');% get the size of the screen, to put the fig on the upper right
86PosGUI=get(handles.set_object,'Position');% fig width in pixels
87Width=PosGUI(3);%width of the gui set_object in pixels
88Height=PosGUI(4);
89Left=ScreenSize(3)- Width-40; %right edge close to the right, with margin=40
90Bottom=ScreenSize(4)-Height-40; %put fig at top right
91set(handles.set_object,'Unit','pixels')
92set(handles.set_object,'Position',[Left Bottom Width Height])
93
94%default
95if ~exist('ZBounds','var')
96    ZBounds=0; %default
97end
98set(hObject,'WindowButtonDownFcn',{'mouse_down'})%set mouse click action function
99set(hObject,'DeleteFcn',{@closefcn})
100
101% fill the interface as set in the input data:
102if exist('data','var')
103    if isfield(data,'Coord')
104        set(handles.Coord,'Data',data.Coord)
105        if size(data.Coord,2)==3
106        set(handles.z_slider,'Visible','on')
107        end
108    else
109        set(handles.z_slider,'Visible','off')
110    end
111    if isfield(data,'TypeMenu')
112        set(handles.Type,'String',data.TypeMenu)
113    end
114    if isfield(data,'ProjModeMenu')
115        set(handles.ProjMode,'UserData',data.ProjModeMenu)% data.ProjModeMenu as default menu (used in Type_Callback)
116    end     
117    errormsg=fill_GUI(data,handles.set_object);
118    if ~isempty(errormsg)
119        msgbox_uvmat('ERROR','bad data input in set_object')
120        return
121    end
122    Type_Callback(hObject, eventdata, handles)% update the GUI set_object depending on the object type   
123    set(handles.REFRESH,'BackgroundColor',[1 0 0])
124    if isfield(data,'RangeZ')
125        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
126        if length(ZBounds) >= 2
127            DZ=max(data.RangeZ);%slider step
128            if ~isnan(ZBounds(1)) && ZBounds(2)~=ZBounds(1)
129                rel_step(1)=min(DZ/(ZBounds(2)-ZBounds(1)),0.2);%must be smaller than 1
130                rel_step(2)=0.1;
131                set(handles.z_slider,'Visible','on')
132                set(handles.z_slider,'Min',ZBounds(1))
133                set(handles.z_slider,'Max',ZBounds(2))
134                set(handles.z_slider,'SliderStep',rel_step)
135                set(handles.z_slider,'Value',(ZBounds(1)+ZBounds(2))/2)
136            end
137        end
138    end
139    if isfield(data,'RangeX')&& ~strcmp(data.Type,'plane_z')%TODO: generalise
140        if ischar(data.RangeX)
141            data.RangeX=str2num(data.RangeX);
142        end
143        set(handles.num_RangeX_2,'String',num2str(max(data.RangeX),3))
144        set(handles.num_RangeX_1,'String',num2str(min(data.RangeX),3))
145    end
146    if isfield(data,'RangeY')&& ~strcmp(data.Type,'plane_z')%TODO: generalise
147        if ischar(data.RangeY)
148            data.RangeY=str2num(data.RangeY);
149        end
150        set(handles.num_RangeY_2,'String',num2str(max(data.RangeY),3))
151        set(handles.num_RangeY_1,'String',num2str(min(data.RangeY),3))
152    end
153    if isfield(data,'RangeZ')&& ~strcmp(data.Type,'plane_z')%TODO: generalise
154        if ischar(data.RangeZ)
155            data.RangeZ=str2num(data.RangeZ);
156        end
157        set(handles.num_RangeZ_2,'String',num2str(max(data.RangeZ),3))
158        if numel(data.RangeZ)>=2
159            set(handles.num_RangeZ_1,'String',num2str(min(data.RangeZ),3))
160        end
161    end 
162    if ~isfield(data,'Angle')
163        data.Angle=[0 0];
164    end
165%     if isfield(data,'Angle') && isequal(numel(data.Angle),3)
166         set(handles.num_Angle_1,'String',num2str(data.Angle(1)))
167         set(handles.num_Angle_2,'String',num2str(data.Angle(2)))
168%         set(handles.num_Angle_3,'String',num2str(data.Angle(3)))
169%     end
170end
171set(get(handles.set_object,'children'),'enable','off')
172set(handles.SAVE,'enable','on')
173% set(handles.REFRESH,'enable','off')
174
175
176%------------------------------------------------------------------------
177% --- Outputs from this function are returned to the command line.
178function varargout = set_object_OutputFcn(hObject, eventdata, handles)
179%------------------------------------------------------------------------
180% Get default command line output from handles structure
181varargout{1} = handles.output;
182varargout{2}=handles;
183
184%------------------------------------------------------------------------
185% executed when closing the GUI set_object
186function closefcn(gcbo,eventdata)
187%------------------------------------------------------------------------
188huvmat=findobj(allchild(0),'Tag','uvmat');%find the current uvmat interface handle
189if ~isempty(huvmat)
190    hhuvmat=guidata(huvmat);
191    set(hhuvmat.CheckViewObject,'value',0)%
192    set(hhuvmat.CheckEditObject,'Value',0)% desactivate the edit option
193    % deselect the object in ListObject when view_field is closed
194    if isempty(findobj(allchild(0),'Tag','view_field'))
195        ObjIndex=get(hhuvmat.ListObject,'Value');
196        ObjIndex=ObjIndex(1);%keep only the first object selected
197        set(hhuvmat.ListObject,'Value',ObjIndex)
198        % draw all object colors in blue (unselected) in uvmat
199        hother=[findobj(hhuvmat.PlotAxes,'Tag','proj_object');findobj(hhuvmat.PlotAxes,'Tag','DeformPoint')];%find all the proj object and deform point representations
200        for iobj=1:length(hother)
201            if isequal(get(hother(iobj),'Type'),'rectangle')||isequal(get(hother(iobj),'Type'),'patch')
202                set(hother(iobj),'EdgeColor','b')
203                if isequal(get(hother(iobj),'FaceColor'),'m')
204                    set(hother(iobj),'FaceColor','b')
205                end
206            elseif isequal(get(hother(iobj),'Type'),'image')
207                Acolor=get(hother(iobj),'CData');
208                Acolor(:,:,1)=zeros(size(Acolor,1),size(Acolor,2));
209                set(hother(iobj),'CData',Acolor);
210            else
211                set(hother(iobj),'Color','b')
212            end
213            set(hother(iobj),'Selected','off')
214        end
215    end
216end
217hseries=findobj(allchild(0),'Name','series');%find the current series interface handle
218if ~isempty(hseries)
219    hhseries=guidata(hseries);
220    set(hhseries.EditObject,'Value',0)
221end
222
223
224%------------------------------------------------------------------------
225% --- Executes on selection change in Type.
226function Type_Callback(hObject, eventdata, handles)
227%------------------------------------------------------------------------
228
229ListType=get(handles.Type,'String');
230Type=ListType{get(handles.Type,'Value')};
231% make correspondance between different object styles
232Coord=get(handles.Coord,'Data');
233
234%% set the number of lines in the Coord table depending on object type
235switch Type
236    case{'line'}
237        if size(Coord,1)<2
238            if isequal(size(Coord,2),3)
239                Coord=[Coord; 0 0 0];%add a line for edition (3D case)
240            else
241                Coord=[Coord; 0 0]; %add a line for edition (2D case)
242            end
243        else
244            Coord=Coord(1:2,:);
245        end
246    case{'rectangle','ellipse','plane','volume'}
247        Coord=Coord(1,:);
248end
249set(handles.Coord,'Data',Coord)
250
251%% set the projection menu and the corresponding options
252if isempty(get(handles.ProjMode,'UserData'))
253    switch Type
254        case 'polyline'
255            menu_proj={'interp_lin';'interp_tps';'none'};
256        case {'polygon','rectangle','ellipse'}
257            menu_proj={'inside';'outside';'mask_inside';'mask_outside';'interp_lin';'interp_tps';'none'};
258        case 'volume'
259            menu_proj={'interp_lin';'none'};
260        otherwise
261            menu_proj={'projection';'interp_lin';'interp_tps';'none'};%default
262    end
263else
264    menu_proj=get(handles.ProjMode,'UserData');
265end
266ProjModeList=get(handles.ProjMode,'String');
267menu_index=find(strcmp(ProjModeList{get(handles.ProjMode,'Value')},menu_proj));
268if isempty(menu_index)
269    menu_index=1;%
270end
271set(handles.ProjMode,'Value',menu_index);% value index must not exceed the menu length
272set(handles.ProjMode,'String',menu_proj)
273ProjMode_Callback(hObject, eventdata, handles)
274
275%------------------------------------------------------------------------
276% --- Executes on selection change in ProjMode.
277%------------------------------------------------------------------------
278function ProjMode_Callback(hObject, eventdata, handles)
279
280set(handles.REFRESH,'BackgroundColor',[1 0 1])
281menu=get(handles.ProjMode,'String');
282value=get(handles.ProjMode,'Value');
283ProjMode=menu{value};
284menu=get(handles.Type,'String');
285value=get(handles.Type,'Value');
286ObjectStyle=menu{value};
287%%%%%%%%% TODO
288test3D=strcmp(ObjectStyle,'plane_z'); %TODO: generalize
289%%%%%%%%%
290%default setting
291set(handles.num_Angle_1,'Visible','off')
292set(handles.num_Angle_2,'Visible','off')
293%set(handles.num_Angle_3,'Visible','off')
294set(handles.num_RangeX_1,'Visible','off')
295set(handles.num_RangeX_2,'Visible','off')
296set(handles.num_RangeY_1,'Visible','off')
297if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
298    set(handles.num_RangeY_2,'Visible','off')
299else
300    set(handles.num_RangeY_2,'Visible','on')
301end
302if strcmp(ObjectStyle,'rectangle')||strcmp(ObjectStyle,'ellipse')
303    set(handles.num_RangeX_2,'Visible','on')
304else
305   set(handles.num_RangeX_2,'Visible','off')
306end
307set(handles.num_RangeZ_1,'Visible','off')
308set(handles.num_RangeZ_2,'Visible','off')
309set(handles.num_DX,'Visible','off')
310set(handles.num_DY,'Visible','off')
311set(handles.num_DZ,'Visible','off')
312set(handles.num_RangeInterp,'Visible','off')
313
314switch ObjectStyle
315    case 'points'
316        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around each point')
317%         set(handles.XObject,'TooltipString','XObject: set of x coordinates of the points')
318%         set(handles.YObject,'TooltipString','YObject: set of y coordinates of the points')
319%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates of the points')
320    case {'line','polyline','polygon'}
321        set(handles.num_RangeY_2,'TooltipString','num_RangeY_2: range of projection around the line')
322         set(handles.Coord,'TooltipString','Coord: table of x,y, z coordinates defining the line')
323%         set(handles.YObject,'TooltipString','YObject: set of y coordinates defining the line')
324%         set(handles.ZObject,'TooltipString','ZObject: set of z coordinates defining the line')
325        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
326            set(handles.num_DX,'Visible','on')
327            set(handles.num_DX,'TooltipString','num_DX: mesh for the interpolated field along the line')
328            set(handles.num_RangeInterp,'Visible','on')
329        end       
330    case {'rectangle','ellipse'}
331        set(handles.num_RangeX_2,'TooltipString',['num_RangeX_2: half length of the ' ObjectStyle])
332        set(handles.num_RangeY_2,'TooltipString',['num_RangeY_2: half width of the ' ObjectStyle])
333    case {'plane','plane_z'} 
334%        set(handles.num_Angle_3,'Visible','on')
335        set(handles.num_RangeX_1,'Visible','on')
336        set(handles.num_RangeX_2,'Visible','on')
337        set(handles.num_RangeY_1,'Visible','on')
338        set(handles.num_RangeY_2,'Visible','on')
339        set(handles.num_RangeZ_2,'TooltipString','num_ZMax: range of projection normal to the plane')
340        if test3D
341            set(handles.num_Angle_2,'Visible','on')
342            set(handles.num_Angle_1,'Visible','on')
343            set(handles.num_Angle_1,'String','90')
344            %set(handles.Coord,'Data',[0 0 0])
345            set(handles.num_RangeZ_2,'Visible','on')
346        end
347        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
348            set(handles.num_DX,'Visible','on')
349            set(handles.num_DY,'Visible','on')
350            set(handles.num_RangeInterp,'Visible','on')
351        else
352            set(handles.num_DX,'Visible','off')
353            set(handles.num_DY,'Visible','off')
354        end
355%         if  isequal(ProjMode,'interp_lin')
356%             set(handles.num_DZ,'Visible','on') 
357%         end
358     case {'volume'} 
359        set(handles.num_RangeX_1,'Visible','on')
360        set(handles.num_RangeX_2,'Visible','on')
361        set(handles.num_RangeY_1,'Visible','on')
362        set(handles.num_RangeY_2,'Visible','on')
363        set(handles.XObject,'TooltipString',['XObject:  x coordinate of the axis origin for the ' ObjectStyle])
364        set(handles.YObject,'TooltipString',['YObject:  y coordinate of the axis origin for the ' ObjectStyle])
365        set(handles.num_Angle_1,'Visible','on')
366        set(handles.num_Angle_2,'Visible','on')
367        %set(handles.num_Angle_3,'Visible','on')
368        set(handles.num_RangeZ_1,'Visible','on')
369        set(handles.num_RangeZ_2,'Visible','on')
370        if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
371            set(handles.num_DX,'Visible','on')
372            set(handles.num_DY,'Visible','on')
373            set(handles.num_DZ,'Visible','on')
374        else
375            set(handles.num_DX,'Visible','off')
376            set(handles.num_DY,'Visible','off')
377            set(handles.num_DZ,'Visible','off')
378        end
379end
380% set default values read in the plot of uvmat to initiate the mesh
381if isequal(ProjMode,'interp_lin')|| isequal(ProjMode,'interp_tps')
382            huvmat=findobj('Tag','uvmat');%find the current uvmat interface handle
383        UvData=get(huvmat,'UserData');%Data associated to the current uvmat interface
384    if isempty(str2num(get(handles.num_DX,'String')))||isempty(str2num(get(handles.num_DY,'String')));     
385%         Field=UvData.Field;
386        if  isfield(UvData.Field,'CoordMesh')&&~isempty(UvData.Field.CoordMesh)
387            set(handles.num_DX,'String',num2str(UvData.Field.CoordMesh))
388            set(handles.num_DY,'String',num2str(UvData.Field.CoordMesh))
389            set(handles.num_RangeX_1,'String',num2str(UvData.Field.XMin))
390            set(handles.num_RangeX_2,'String',num2str(UvData.Field.XMax))
391            set(handles.num_RangeY_1,'String',num2str(UvData.Field.YMin))
392            set(handles.num_RangeY_2,'String',num2str(UvData.Field.YMax))
393        end
394        if isempty(get(handles.CoordUnit,'String'))&& isfield(UvData.Field,'CoordUnit')
395            set(handles.CoordUnit,'String',UvData.Field.CoordUnit)
396        end       
397    end
398    if isempty(str2num(get(handles.num_RangeInterp,'String'))) && isfield(UvData,'Field')
399     set(handles.num_RangeInterp,'String',num2str(3*UvData.Field.CoordMesh))% default interpolationlength= 3 meshes
400    end
401end
402
403%------------------------------------------------------------------------
404
405%------------------------------------------------------------------------
406function num_Angle_1_Callback(hObject, eventdata, handles)
407update_slider(hObject, eventdata,handles)
408%------------------------------------------------------------------------
409%------------------------------------------------------------------------
410function num_Angle_2_Callback(hObject, eventdata, handles)
411update_slider(hObject, eventdata,handles)
412%------------------------------------------------------------------------
413function update_slider(hObject, eventdata,handles)
414%rotation angles
415PlaneAngle(1)=str2num(get(handles.num_Angle_1,'String'));%first  angle in degrees
416PlaneAngle(2)=str2num(get(handles.num_Angle_2,'String'));%second  angle in degrees
417%PlaneAngle(3)=str2num(get(handles.num_Angle_3,'String'));%second  angle in degrees
418om=norm(PlaneAngle);%norm of rotation angle in radians
419OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
420cos_om=cos(pi*om/180);
421sin_om=sin(pi*om/180);
422coeff=OmAxis(3)*(1-cos_om);
423%components of the unity vector norm_plane normal to the projection plane
424norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
425norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
426norm_plane(3)=OmAxis(3)*coeff+cos_om;
427huvmat=findobj('Tag','uvmat');%find the current uvmat interface handle
428UvData=get(huvmat,'UserData');%Data associated to the current uvmat interface
429if isfield(UvData,'X') && isfield(UvData,'Y') && isfield(UvData,'Z')
430    Z=norm_plane(1)*(UvData.X)+norm_plane(2)*(UvData.Y)+norm_plane(3)*(UvData.Z);
431    set(handles.z_slider,'Min',min(Z))
432    set(handles.z_slider,'Max',max(Z))
433    ZMax_Callback(hObject, eventdata, handles)
434end
435%------------------------------------------------------------------------
436function num_DX_Callback(hObject, eventdata, handles)
437%------------------------------------------------------------------------
438%------------------------------------------------------------------------
439function num_DY_Callback(hObject, eventdata, handles)
440%------------------------------------------------------------------------
441%------------------------------------------------------------------------
442function num_DZ_Callback(hObject, eventdata, handles)
443%------------------------------------------------------------------------
444
445
446%------------------------------------------------------------------------
447% --- Executes on button press in REFRESH: refresh the current object , refresh the object and its projected field
448%------------------------------------------------------------------------
449function REFRESH_Callback(hObject, eventdata, handles)
450
451set(handles.REFRESH,'BackgroundColor',[1 1 0])% indicate activation of REFRESH
452drawnow
453
454%% update the object in the GUI series if relevant
455if strcmp(get(handles.set_object,'Name'),'edit_object_series')
456    hseries=findobj(allchild(0),'Tag','series');
457    if ~isempty(hseries)
458        SeriesData=get(hseries,'UserData');
459    SeriesData.ProjObject=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
460    set(hseries,'UserData',SeriesData);
461    end
462    set(handles.REFRESH,'BackgroundColor',[1 0 0])
463    return
464end
465
466%% read the object parameters in the GUI set_object
467ObjectData=read_GUI(handles.set_object);%read the parameters defining the object in the GUI set_object
468if isfield(ObjectData,'CoordLine')% remove CoordLine (not used as object feature)
469    ObjectData=rmfield(ObjectData,'CoordLine');
470end
471if iscell(ObjectData.Coord)%check for empty line
472    ObjectData.Coord=[0 0 0];
473    hhset_object=guidata(handles.set_object);
474    set(hhset_object.Coord,'Data',ObjectData.Coord)
475end
476checknan=isnan(sum(ObjectData.Coord,2));%check for NaN lines
477if ~isempty(checknan)
478    ObjectData.Coord(checknan,:)=[];%remove the NaN lines
479end
480ObjectName=ObjectData.Name;%name of the current object defined in set_object
481if isempty(ObjectName)
482     ObjectName=ObjectData.Type;% name the object by the object type type by default
483end
484
485%% read the current object selection in the GUI uvmat
486huvmat=findobj('tag','uvmat');%find the current uvmat GUI handle
487UvData=get(huvmat,'UserData');%Data associated to the GUI uvmat
488hhuvmat=guidata(huvmat);%handles of the objects children of the  GUI uvmat
489ListObject=get(hhuvmat.ListObject,'String');% list of objects displayed in uvmat
490
491if isequal(get(hhuvmat.CheckEditObject,'Value'),0) %we append a new object
492    ListObject=[ListObject;{''}];
493    IndexObj=length(ListObject);
494    set(hhuvmat.ListObject,'String',ListObject)
495    set(hhuvmat.ListObject,'Value',IndexObj)
496    UvData.ProjObject{IndexObj}=[]; %create a new empty object
497    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; % axes for plot_object
498    UvData.ProjObject{IndexObj}.DisplayHandle.view_field=[]; %no plot handle before plot_field operation
499else   
500    IndexObj=get(hhuvmat.ListObject,'Value');% index of the selected object for display in uvmat
501end
502
503%set or modify(edit mode) the name of the currently selected object
504detectname=1;
505ObjectNameNew=ObjectName;
506vers=0;% index of the name
507ListOther=ListObject;
508ListOther(IndexObj)=[];
509while ~isempty(detectname)
510    detectname=find(strcmp(ObjectNameNew,ListOther),1);%test the existence of the proposed name in the list
511    if detectname% if the object name already exists
512        indstr=regexp(ObjectNameNew,'\D');%indices of non number characters
513        if indstr(end)<length(ObjectNameNew) %object name ends by a number
514            vers=str2double(ObjectNameNew(indstr(end)+1:end))+1;
515            ObjectNameNew=[ObjectNameNew(1:indstr(end)) num2str(vers)];
516        else
517            vers=vers+1;
518            ObjectNameNew=[ObjectNameNew(1:indstr(end)) '_' num2str(vers)];
519        end
520    end
521end
522ObjectName=ObjectNameNew;
523set(handles.Name,'String',ObjectName)% display the default name in set_object
524ListObject{IndexObj}=ObjectName;
525set(hhuvmat.ListObject,'String',ListObject);%complement the object list
526set(hhuvmat.ListObject_1,'String',ListObject);%complement the object list
527set(hhuvmat.CheckViewObject,'Value',1)% indicate that the currently selected objected is viewed on set_object
528check_handle=isfield(UvData.ProjObject{IndexObj},'DisplayHandle') && isfield(UvData.ProjObject{IndexObj}.DisplayHandle,'uvmat')...
529    && ~isempty(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat) && ishandle(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat);
530if check_handle
531    obj_handle=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
532end
533UvData.ProjObject{IndexObj}=ObjectData;%record the current object properties in uvmat
534if check_handle
535    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=obj_handle; %preserve the object plot handle if valid
536else
537    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=hhuvmat.PlotAxes; %axes taken as object display handle by defualt
538end
539
540%% refresh the field projected on the object
541hview_field=[];%default
542IndexObj_1=get(hhuvmat.ListObject_1,'Value');
543if strcmp(ObjectData.ProjMode,'mask_inside')||strcmp(ObjectData.ProjMode,'mask_outside')||strcmp(ObjectData.ProjMode,'none')
544    PlotType='text';
545else
546    % create tps coeff if needed for ProjMode 'interp_tps'
547    if strcmp(ObjectData.ProjMode,'interp_tps')&&~isfield(UvData.Field,'Coord_tps')
548        %UvData.Field=calc_tps(UvData.Field,1);
549        [UvData.Field,errormsg]=tps_coeff_field(UvData.Field,1);
550        if ~isempty(errormsg)
551            msgbox_uvmat('ERROR', ['set_object/tps_coeff_field/' errormsg])
552            set(handles.REFRESH,'enable','on')
553            return
554        end
555    end
556    [ProjData,errormsg]= proj_field(UvData.Field,ObjectData);%project the current field of uvmat on ObjectData
557    if ~isempty(errormsg)
558        msgbox_uvmat('ERROR', ['set_object/proj_field/' errormsg])
559        set(handles.REFRESH,'enable','on')
560        return
561    end
562    if isequal(IndexObj_1,IndexObj) % if  the projection is in uvmat
563        PlotType=plot_field(ProjData,hhuvmat.PlotAxes,read_GUI(get(hhuvmat.PlotAxes,'parent')));%update the current uvmat plot
564    else  % if the projection is in view_field
565        hview_field=findobj(allchild(0),'tag','view_field');
566        if isempty(hview_field)
567            hview_field=view_field(ProjData); %open the view_field GUI for plot
568        else
569            hhview_field=guidata(hview_field);
570            [PlotType,PlotParam]=plot_field(ProjData,hhview_field.PlotAxes,read_GUI(hview_field));%update an existing  plot in view_field
571            errormsg=fill_GUI(PlotParam,hview_field);
572            if ~isempty(errormsg)
573                msgbox_uvmat('ERROR',errormsg)
574                return
575            end
576            %     write_plot_param(hhview_field,PlotParam); %update the display of plotting parameters for the current object
577        end
578        haxes=findobj(hview_field,'tag','axes3');
579        Data=get(hview_field,'UserData');
580        if strcmp(get(haxes,'Visible'),'off')%sempty(PlotParam.Coordinates)% case of no plot display (pure text table)
581            h_TableDisplay=findobj(hview_field,'tag','TableDisplay');
582            pos_table=get(h_TableDisplay,'Position');
583            pos=get(hview_field,'Position');
584            set(hview_field,'Position',[pos(1)+pos(3)-pos_table(3) pos(2)+pos(4)-pos_table(4) pos_table(3) pos_table(4)])
585            drawnow
586            set(hview_field,'UserData',Data);% restore the previously stored GUI position after GUI resizing
587        else
588            set(hview_field,'Position',Data.GUISize)
589        end
590    end
591end
592
593%% update the object refresh
594hobject=UvData.ProjObject{IndexObj}.DisplayHandle.uvmat;
595% if we are editing the object used for projection in uvmat
596if isequal(IndexObj_1,IndexObj)
597    %update the representation of the current object for projection field represented in view_field
598    for iobj=1:numel(UvData.ProjObject)
599        UvData.ProjObject{iobj}.DisplayHandle.uvmat=...
600            plot_object(UvData.ProjObject{iobj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{iobj}.DisplayHandle.uvmat,'b');
601    end
602else %  we are editing the object used for projection field represented in view_field
603    %update the representation of the current object in uvmat
604    UvData.ProjObject{IndexObj}.DisplayHandle.uvmat=...
605             plot_object(UvData.ProjObject{IndexObj},UvData.ProjObject{IndexObj_1},UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'m');
606    %indicate the object index in the user data of the object refresh (needed for further mouse editing)
607    ObjectInfo=get(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData');
608    ObjectInfo.IndexObj=IndexObj;
609    set(UvData.ProjObject{IndexObj}.DisplayHandle.uvmat,'UserData',ObjectInfo)
610    % update the representation of all objects in view_field
611    for iobj=1:numel(UvData.ProjObject)
612        if isfield(UvData.ProjObject{iobj},'DisplayHandle') && isfield(UvData.ProjObject{iobj}.DisplayHandle,'view_field')
613            UvData.ProjObject{iobj}.DisplayHandle.view_field=...
614                plot_object(UvData.ProjObject{iobj},UvData.ProjObject{iobj},UvData.ProjObject{iobj}.DisplayHandle.view_field,'b');
615        end
616    end
617end
618set(huvmat,'UserData',UvData)
619
620%% update the GUI uvmat
621set(hhuvmat.CheckEditObject,'Value',1) % set uvmat to object edit mode to allow further object update
622set(hhuvmat.CheckViewField,'Value',1)
623
624set(handles.REFRESH,'BackgroundColor',[1 0 0])
625set(handles.num_RangeY_2,'BackgroundColor',[1 1 1])
626
627% --- Executes on button press in DisplayCoord.
628function DisplayCoord_Callback(hObject, eventdata, handles)
629global Coord
630Coord=get(handles.Coord,'Data');
631evalin('base','global Coord')%make Coord global in the workspace
632display('object coordinates:')
633evalin('base','Coord') %display Coord in the workspace
634commandwindow; %brings the Matlab command window to the front
635
636%----------------------------------------------------
637function num_RangeY_1_Callback(hObject, eventdata, handles)
638%------------------------------------------------------------------------
639
640function num_RangeZ_1_Callback(hObject, eventdata, handles)
641%------------------------------------------------------------------------
642
643function num_RangeZ_2_Callback(hObject, eventdata, handles)
644DZ=str2num(get(handles.num_RangeZ_2,'String'));
645ZMin=get(handles.z_slider,'Min');
646ZMax=get(handles.z_slider,'Max');
647if ~isequal(ZMax-ZMin,0)
648    rel_step(1)=DZ/(ZMax-ZMin);
649    rel_step(2)=0.2;
650    set(handles.z_slider,'SliderStep',rel_step)
651end
652%------------------------------------------------------------------------
653function num_RangeY_2_Callback(hObject, eventdata, handles)
654%------------------------------------------------------------------------
655
656function num_RangeX_1_Callback(hObject, eventdata, handles)
657%------------------------------------------------------------------------
658
659function num_RangeX_2_Callback(hObject, eventdata, handles)
660
661%------------------------------------------------------------------------
662%------------------------------------------------------------------------
663function SAVE_Callback(hObject, eventdata, handles)
664% ------------------------------------------------------
665Object=read_GUI(handles.set_object);
666if isfield(Object,'CoordLine')% remove CoordLine (not used as object feature)
667    Object=rmfield(Object,'CoordLine');
668end
669huvmat=findobj('Tag','uvmat');
670if isempty(huvmat)
671    huvmat=findobj(allchild(0),'Name','series');
672end
673hchild=get(huvmat,'Children');
674hrootpath=findobj(hchild,'Tag','RootPath');
675if isempty(hrootpath)
676    RootPath='';
677else
678    RootPath=get(hrootpath,'String');
679    if iscell(RootPath)
680        RootPath=RootPath{1};
681    end
682end
683title={'object name'};
684dir_save=uigetfile_uvmat('select the folder for the new xml object file:',RootPath,'uigetdir');
685if ~isempty(dir_save)
686    ObjectName=get(handles.Name,'String');
687    if ~isempty(ObjectName)&&~strcmp(ObjectName,'')
688        def=[ObjectName '.xml'];
689    else
690        def=[Object.Style '.xml'];
691    end
692    displ_txt={['save object in' dir_save]; 'with file name (.xml):'};%default display
693    menu=get(handles.ProjMode,'String');
694    value=get(handles.ProjMode,'Value');
695    ProjMode=menu{value};
696    if strcmp(ProjMode,'mask_inside')||strcmp(ProjMode,'mask_outside')
697        displ_txt=[displ_txt; '(note: to create a mask image, use ''Tools/make mask'' on the upper bar menu of uvmat)'];
698    end
699    answer=msgbox_uvmat('INPUT_TXT',displ_txt,def);
700    if ischar(answer)
701        FullName=fullfile(dir_save,answer);
702        t=struct2xml(Object);
703        t=set(t,1,'name','ProjObject');
704        try
705            save(t,FullName)
706            msgbox_uvmat('CONFIRMATION',[FullName  ' saved'])
707        catch ME
708            msgbox_uvmat('ERROR',ME.message)
709        end
710    end
711end
712
713%------------------------------------------------------------------------
714% --- Executes on slider movement.
715function z_slider_Callback(hObject, eventdata, handles)
716%---------------------------------------------------------
717Z_value=get(handles.z_slider,'Value');
718%rotation angles
719PlaneAngle=[0 0];
720norm_plane=[0 0 1];
721cos_om=1;
722sin_om=0;
723
724PlaneAngle(1)=str2double(get(handles.num_Angle_1,'String'));%first  angle in degrees
725PlaneAngle(2)=str2double(get(handles.num_Angle_2,'String'));%second  angle in degrees
726%PlaneAngle(3)=str2double(get(handles.num_Angle_3,'String'));%second  angle in degrees
727PlaneAngle=(pi/180)*PlaneAngle;
728M2=[cos(PlaneAngle(2)) sin(PlaneAngle(2)) 0;-sin(PlaneAngle(2)) cos(PlaneAngle(2)) 0;0 0 1];
729M1=[1 0 0;0 cos(PlaneAngle(1)) sin(PlaneAngle(1));0 -sin(PlaneAngle(1)) cos(PlaneAngle(1))];
730M=M1*M2;
731norm_plane=M*[0 0 1]';
732
733% om=norm(PlaneAngle);%norm of rotation angle in radians
734% if isequal(om,0)
735%     norm_plane=[0 0 1];
736% else
737%     OmAxis=PlaneAngle/om; %unit vector marking the rotation axis
738%     cos_om=cos(om);
739%     sin_om=sin(om);
740%     coeff=OmAxis(3)*(1-cos_om);
741%     %components of the unity vector norm_plane normal to the projection plane
742%     norm_plane(1)=OmAxis(1)*coeff+OmAxis(2)*sin_om;
743%     norm_plane(2)=OmAxis(2)*coeff-OmAxis(1)*sin_om;
744%     norm_plane(3)=OmAxis(3)*coeff+cos_om;
745% end
746Coord=get(handles.Coord,'Data');
747Coord(3)=Z_value;
748set(handles.Coord,'Data',Coord)
749
750% update graph
751REFRESH_Callback(hObject, eventdata, handles)
752
753%------------------------------------------------------------------------
754% --- Executes on button press in HELP.
755function HELP_Callback(hObject, eventdata, handles)
756%------------------------------------------------------------------------
757web('http://servforge.legi.grenoble-inp.fr/projects/soft-uvmat/wiki/UvmatHelp#ProjObject')
758
759%------------------------------------------------------------------------
760% --- Executes when selected cell(s) is changed in ListCoord.
761%------------------------------------------------------------------------
762function Coord_CellSelectionCallback(hObject, eventdata, handles)
763if ~isempty(eventdata.Indices)
764    iline=eventdata.Indices(1);% selected line number
765    set(handles.CoordLine,'String',num2str(iline))
766end
767
768
769% function num_Angle_3_Callback(hObject, eventdata, handles)
770%
771% %------------------------------------------------------------------------
772% % --- Executes on key press with selection of a uicontrol
773% %------------------------------------------------------------------------
774% function KeyPressFcn(hObject, eventdata, handles)
775% set(handles.REFRESH,'BackgroundColor',[1 0 1])% se REFRESH to magenta color, indicates that refresh needs to be done
776% if strcmp(get(hObject,'Tag'),'num_Angle_3')
777%     set(handles.num_RangeX_1,'String','')
778%     set(handles.num_RangeX_2,'String','')
779%         set(handles.num_RangeY_1,'String','')
780%     set(handles.num_RangeY_2,'String','')
781% end
782
783%------------------------------------------------------------------------
784% --- Executes on key press with focus on Coord and none of its controls.
785%------------------------------------------------------------------------
786function Coord_KeyPressFcn(hObject, eventdata, handles)
787
788set(handles.REFRESH,'BackgroundColor',[1 0 1])
789xx=double(get(handles.set_object,'CurrentCharacter')); %get the keyboard character
790if ismember(xx,[127 31])% delete, or downward
791    Coord=get(handles.Coord,'Data');
792    iline=str2double(get(handles.CoordLine,'String'));
793            if isequal(xx, 31)
794                if isequal(iline,size(Coord,1))% arrow downward
795                Coord=[Coord;zeros(1,size(Coord,2))];
796                end
797            else
798    Coord(iline,:)=[];% suppress the current line
799            end
800    set(handles.Coord,'Data',Coord);
801end
802
803%------------------------------------------------------------------------
804% --- Executes on button press in clear_line.
805%------------------------------------------------------------------------
806function clear_line_Callback(hObject, eventdata, handles)
807
808Coord=get(handles.Coord,'Data');
809iline=str2double(get(handles.CoordLine,'String'));
810if isempty(iline)
811    msgbox_uvmat('WARNING','no line suppressed, select a line in the table')
812else
813    Coord(iline,:)=[];
814    set(handles.REFRESH,'BackgroundColor',[1 0 1])
815    set(handles.Coord,'Data',Coord);
816    set(handles.CoordLine,'String','')
817    REFRESH_Callback(hObject,eventdata,handles)
818end
819
820
821
822function num_RangeInterp_Callback(hObject, eventdata, handles)
823
824
825% --- Executes on key press with focus on num_Angle_1 and none of its controls.
826function num_Angle_1_KeyPressFcn(hObject, eventdata, handles)
827% hObject    handle to num_Angle_1 (see GCBO)
828% eventdata  structure with the following fields (see MATLAB.UI.CONTROL.UICONTROL)
829%       Key: name of the key that was pressed, in lower case
830%       Character: character interpretation of the key(s) that was pressed
831%       Modifier: name(s) of the modifier key(s) (i.e., control, shift) pressed
832% handles    structure with handles and user data (see GUIDATA)
833
834
835% --- Executes on key press with focus on num_Angle_2 and none of its controls.
836function num_Angle_2_KeyPressFcn(hObject, eventdata, handles)
837% hObject    handle to num_Angle_2 (see GCBO)
838% eventdata  structure with the following fields (see MATLAB.UI.CONTROL.UICONTROL)
839%       Key: name of the key that was pressed, in lower case
840%       Character: character interpretation of the key(s) that was pressed
841%       Modifier: name(s) of the modifier key(s) (i.e., control, shift) pressed
842% handles    structure with handles and user data (see GUIDATA)
Note: See TracBrowser for help on using the repository browser.