source: trunk/src/tps_coeff_field.m @ 873

Last change on this file since 873 was 822, checked in by sommeria, 10 years ago

various

File size: 7.3 KB
Line 
1%'tps_coeff_field': calculate the thin plate spline (tps) coefficients within subdomains for a field structure
2%---------------------------------------------------------------------
3% DataOut=tps_coeff_field(DataIn,checkall)
4%
5% OUTPUT:
6% DataOut: output field structure, reproducing the input field structure DataIn and adding the fields:
7%         .Coord_tps
8%         .[VarName '_tps'] for each eligible input variable VarName (scalar or vector components)
9% errormsg: error message, = '' by default
10%
11% INPUT:
12% DataIn: intput field structure
13% checkall:=1 if tps is needed for all fields (a projection mode interp_tps has been chosen),
14%          =0 otherwise (tps only needed to get spatial derivatives of scattered data)
15%
16% called functions:
17% 'find_field_cells': analyse the input field structure, grouping the variables  into 'fields' with common coordinates
18% 'set_subdomains': sort a set of points defined by scattered coordinates in subdomains, as needed for tps interpolation
19% 'tps_coeff': calculate the thin plate spline (tps) coefficients for a single domain.
20
21%=======================================================================
22% Copyright 2008-2014, LEGI UMR 5519 / CNRS UJF G-INP, Grenoble, France
23%   http://www.legi.grenoble-inp.fr
24%   Joel.Sommeria - Joel.Sommeria (A) legi.cnrs.fr
25%
26%     This file is part of the toolbox UVMAT.
27%
28%     UVMAT is free software; you can redistribute it and/or modify
29%     it under the terms of the GNU General Public License as published
30%     by the Free Software Foundation; either version 2 of the license,
31%     or (at your option) any later version.
32%
33%     UVMAT is distributed in the hope that it will be useful,
34%     but WITHOUT ANY WARRANTY; without even the implied warranty of
35%     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
36%     GNU General Public License (see LICENSE.txt) for more details.
37%=======================================================================
38
39function [DataOut,errormsg]=tps_coeff_field(DataIn,checkall)     
40DataOut=DataIn;%default
41SubDomainNbPoint=1000; %default, estimated nbre of data source points in a subdomain used for tps
42if isfield(DataIn,'SubDomain')
43    SubDomainNbPoint=DataIn.SubDomain;%old convention
44end
45if isfield(DataIn,'SubDomainNbPoint')
46    SubDomainNbPoint=DataIn.SubDomainNbPoint;%
47end
48[CellInfo,NbDimArray,errormsg]=find_field_cells(DataIn);
49if ~isempty(errormsg)
50    errormsg=['tps_coeff_field/find_field_cells/' errormsg];
51    return
52end
53nbtps=0;% indicate the number of tps coordinate sets in the field structure (in general =1)
54
55for icell=1:numel(CellInfo);
56    if NbDimArray(icell)>=2 && strcmp(CellInfo{icell}.CoordType,'scattered') %if the coordinates are scattered
57        NbCoord=NbDimArray(icell);% dimension of space
58        nbtps=nbtps+1;% indicate the number of tps coordinate sets in the field structure (in general =1)
59        X=DataIn.(DataIn.ListVarName{CellInfo{icell}.CoordIndex(end)});% value of x coordinate
60        Y=DataIn.(DataIn.ListVarName{CellInfo{icell}.CoordIndex(end-1)});% value of y coordinate
61        check_interp_tps=false(numel(DataIn.ListVarName),1);
62        Index_interp=[];% indices of variables to interpolate
63        if isfield(CellInfo{icell},'VarIndex_scalar')%interpolate scalar
64            Index_interp=[Index_interp CellInfo{icell}.VarIndex_scalar];
65        end
66        if isfield(CellInfo{icell},'VarIndex_vector_x')%interpolate vector x component
67            Index_interp=[Index_interp CellInfo{icell}.VarIndex_vector_x];
68        end
69        if isfield(CellInfo{icell},'VarIndex_vector_y')%interpolate vector y component
70            Index_interp=[Index_interp CellInfo{icell}.VarIndex_vector_y];
71        end
72        for iselect=1:numel(Index_interp)
73            Attr=DataIn.VarAttribute{Index_interp(iselect)};
74            if ~isfield(Attr,'VarIndex_tps')&& (checkall || (isfield(Attr,'ProjModeRequest')&&strcmp(Attr.ProjModeRequest,'interp_tps')))
75                check_interp_tps(Index_interp(iselect))=1;
76            end
77        end
78        ListVarInterp=DataIn.ListVarName(check_interp_tps);
79        VarIndexInterp=find(check_interp_tps);
80        if ~isempty(ListVarInterp)
81            % exclude data points marked 'false' for interpolation
82            if isfield(CellInfo{icell},'VarIndex_errorflag')
83                FF=DataIn.(DataIn.ListVarName{CellInfo{icell}.VarIndex_errorflag});% error flag
84                X=X(FF==0);
85                Y=Y(FF==0);
86                for ilist=1:numel(ListVarInterp)
87                    DataIn.(ListVarInterp{ilist})=DataIn.(ListVarInterp{ilist})(FF==0);
88                end
89            end
90            term='';
91            if nbtps>1
92                term=['_' num2str(nbtps-1)];
93            end
94            ListNewVar=cell(1,numel(ListVarInterp)+3);
95            ListNewVar(1:3)={['SubRange' term],['NbCentre' term],['Coord_tps' term]};
96            for ilist=1:numel(ListVarInterp)
97                ListNewVar{ilist+3}=[ListVarInterp{ilist} '_tps' term];
98            end
99            nbvar=numel(DataIn.ListVarName);
100            DataOut.ListVarName=[DataIn.ListVarName ListNewVar];
101            DataOut.VarDimName=[DataIn.VarDimName {{'nb_coord','nb_bounds',['nb_subdomain' term]}} {['nb_subdomain' term]} ...
102                {{['nb_tps' term],'nb_coord',['nb_subdomain' term]}}];
103            DataOut.VarAttribute{nbvar+3}.Role='coord_tps';
104            [SubRange,NbCentre,IndSelSubDomain] =set_subdomains([X Y],SubDomainNbPoint);% create subdomains for tps
105            for isub=1:size(SubRange,3)
106                ind_sel=IndSelSubDomain(1:NbCentre(isub),isub);% array indices selected for the subdomain
107                DataOut.(['Coord_tps' term])(1:NbCentre(isub),1:2,isub)=[X(ind_sel) Y(ind_sel)];
108                DataOut.(['Coord_tps' term])(NbCentre(isub)+1:NbCentre(isub)+3,1:2,isub)=0;%matrix of zeros to complement the matrix Coord_tps (conveninent for file storage)
109            end
110            for ivar=1:numel(ListVarInterp)
111                DataOut.VarDimName{nbvar+3+ivar}={['nb_tps' term],['nb_subdomain' term]};
112                DataOut.VarAttribute{nbvar+3+ivar}=DataIn.VarAttribute{CellInfo{icell}.VarIndex_vector_x};%reproduce attributes of velocity
113                if ~isfield(DataIn.VarAttribute{VarIndexInterp(ivar)},'Role')
114                    DataOut.VarAttribute{nbvar+3+ivar}.Role='scalar_tps';
115                else
116                    DataOut.VarAttribute{nbvar+3+ivar}.Role=[DataIn.VarAttribute{VarIndexInterp(ivar)}.Role '_tps'];
117                end
118                DataOut.VarAttribute{VarIndexInterp(ivar)}.VarIndex_tps=nbvar+3+ivar;% indicate the tps correspondance in the source data
119            end
120            if isfield(DataOut,'ListDimName')%cleaning'
121                DataOut=rmfield(DataOut,'ListDimName');
122            end
123            if isfield(DataOut,'DimValue')%cleaning
124                DataOut=rmfield(DataOut,'DimValue');
125            end
126            DataOut.(['SubRange' term])=SubRange;
127            DataOut.(['NbCentre' term])=NbCentre;
128            for ilist=1:numel(VarIndexInterp)
129                for isub=1:size(SubRange,3)
130                    ind_sel=IndSelSubDomain(1:NbCentre(isub),isub);% array indices selected for the subdomain
131                    [tild,Var_tps(1:NbCentre(isub)+NbCoord+1,isub)]=tps_coeff([X(ind_sel) Y(ind_sel)],DataIn.(ListVarInterp{ilist})(ind_sel),0);%calculate the tps coeff in the subdomain
132                end
133                DataOut.(ListNewVar{ilist+3})=Var_tps;
134            end
135        end
136    end
137end
Note: See TracBrowser for help on using the repository browser.