| 48 | |
| 49 | [[BR]] |
| 50 | == 2.5 Definition of the relevant non-dimensional numbers == |
| 51 | define here the derived parameters of interest, in particular non-dimensional numbers. |
| 52 | |
| 53 | . |
| 54 | |
| 55 | = 3 Instrumentation and data acquisition = |
| 56 | == 3.1 Instruments == |
| 57 | L'acquisition d'image a été faite avec deux cameras identiques Dalsa |
| 58 | |
| 59 | (with positions of probes, cameras...) |
| 60 | |
| 61 | == 3.2 Definition of time origin and instrument synchronisation == |
| 62 | logiciel d'acquisition: ? |
| 63 | |
| 64 | == 3.3 Requested final output and statistics == |
| 65 | Les résultats finaux de l'acquisition sont des séries de 4000 images (une pour chaque camera). |
| 66 | . |
| 67 | |
| 68 | = 4 - Methods of calibration and data processing: = |
| 69 | Le logiciel UVMAT a été utilisé pour la calibration d'images suivant le schéma en 2.2 et le traitement de celles-ci. |
| 70 | |
| 71 | Deux PIV ont été effectués sur chaque série d'images. Étant donné les faibles vitesses observées les boites de recherches étaient fixes et de grande dimensions. Lorsqu'aucune modulation en vitesse n’était appliquée, un delta de 5 image fut utilisé dans les PIV afin de diminuer l'erreur de calcul sur les faibles vitesses. Pour la modulation en vitesse, aucun delta ne fut pris dans le but d'observer le plus précisément possible la variation de vitesse. |
| 72 | |
| 73 | = 5 - Organization of data files: = |
| 74 | Toutes les données et résultats de ce projet sont enregistrés sous /.fsnet/project/coriolis/2015/15STABILITY de la manière suivante: |
| 75 | |
| 76 | * 0_DOC: documentation et rapports |
| 77 | * 0_FIG: figures et résultats |
| 78 | * 0_MATLAB_FCT: fonctions matlab spécifiques au projet |
| 79 | * 0_PHOTOS: photos de l'installation |
| 80 | * 0_REF_FILES: fichiers généraux du projet (calibration data, grids ...) |
| 81 | * EXP1, EXP2, dossiers propres à chaque essai. A l'interieur de chacun de ces dossiers on retrouve: |
| 82 | * Dalsa#: dossier images de la camera correspondante. |
| 83 | * Différents fichiers de traitement d'images .civ et .tseries pour chaque séries d'images. |
| 84 | * Un fichier xml, Dalsa#.xml, contenant les informations techniques des cameras, par exemple les paramètres de calibration et le temps d'acquisition d'une série d'images. |
| 85 | |
| 86 | = 6 - Table of experiments = |
| 87 | Les différents essais sont listés ci-dessous avec leurs paramètres définis dans les sections précédentes: |
68 | | |
69 | | [[BR]] |
70 | | == 2.5 Definition of the relevant non-dimensional numbers == |
71 | | define here the derived parameters of interest, in particular non-dimensional numbers. |
72 | | |
73 | | . |
74 | | |
75 | | = 3 Instrumentation and data acquisition = |
76 | | == 3.1 Instruments == |
77 | | L'acquisition d'image a ete faite avec deux cameras identiques Dalsa with positions of probes, cameras... |
78 | | |
79 | | == 3.2 Definition of time origin and instrument synchronisation == |
80 | | logiciel d'acquisition: ? |
81 | | |
82 | | == 3.3 Requested final output and statistics == |
83 | | . |
84 | | |
85 | | = 4 - Methods of calibration and data processing: = |
86 | | = 5 - Organization of data files: = |
87 | | All data related to the project are in Coriolis /.fsnet/project/coriolis/2014/'project name' |
88 | | |
89 | | * 0_DOC: miscellaneous documentation and reports |
90 | | * 0_MATLAB_FCT: specific matlab functions |
91 | | * 0_PHOTOS: photos of set-up |
92 | | * 0_REF_FILES: files of general use (calibration data, grids ...) |
93 | | * 0_RESULTS: processed data (time series, statistics...) and figures. |
94 | | * EXP1, EXP2, folder for each experiment. Structure of each Experiment folder: |
95 | | * !DeviceFolder: corresponding to the data of a given instrument or camera. |
96 | | * Results from data processing are stored in a folder !DeviceFolder.ext where ext is set by the processing program. |
97 | | * An xml file named !DeviceFolder.xml specifies information from the devices, for instance timing and calibration parameters for an image series. |
98 | | |
99 | | = 6 - Table of experiments = |
100 | | List of parameter, Param1... , denoted by names defined in section 4.2. |
101 | | |
102 | | ||'''Name'''||'''Date'''||'''Param1'''||'''Param2'''||'''Param3'''||'''Remarks'''|| |
103 | | || |||||||||||| |
104 | | ||[#EXP2 #EXP2]|||||||||||| |
105 | | ||[#EXP3 #EXP3]|||||||||||| |
106 | | |
107 | | = = |
108 | | = 7 - Diary: = |
109 | | == EXP1 == |
110 | | == EXP2 == |
111 | | == EXP3 == |