Changes between Version 264 and Version 265 of WikiStart

Timestamp:

Feb 10, 2017, 12:54:06 PM (8 years ago)

Author:

peakall3je

Comment:

--

WikiStart

@@ -25 +25 @@
 For ADV the Y-direction is defined relative to the local channel cross-section at any given X-position. The zero position is defined as the right bank of the channel, as looking downstream. The z-position is defined locally from the bed of the channel, for any given XY position, with zero representing the bed. 
 
-For PIV the y coordinate is transverse to the channel in the straight part, with origin on the inner right hand side of the channel (locking downstream). The z coordinate is vertical upward with origin at the tank bottom. 
+For PIV the y coordinate is transverse to the channel in the straight part, with origin on the inner right hand side of the channel (looking downstream). The z coordinate is vertical upward with origin at the tank bottom. 
 
 The channel system is positioned relative to the centre of the Coriolis table as follows. The centre of the Coriolis table is 13 cm upstream and 45.5 cm to the right hand side (as looking downstream) of the inner bend wall apex position of the first bend [all measurements are taken from the outer edge of the channel wall].